HOW TO INSTALL SMITTYBILT ARMOUR FENDERS ON A 2015 JEEP JK Facebook/millerstv Instagram/tacoma1990 And if you would like to help support the channel check out my patreon @patreon/millerstv
Пікірлер: 108
@ccbaker110 ай бұрын
Did you do the nutserts for the bottom hole on the front ones? I'm having problems getting this done.
@MrFivepointfivesix2 жыл бұрын
Great video I always wanted to know how to remove the cowl the one that the mirror always ended up hitting is such a nightmare to repair now I know they can be drilled out and possibly rebolted back in I can repair them maybe with a paintless style repair. And I don't know who's the genius was they decided to be a good idea to spot well that piece that one piece that constantly is prone to getting dented from the mirror why didn't I just have it for the factory with snap push pins or something that would make it easier to remove to repair
@Shogunnur5 жыл бұрын
Best xrc install so far on KZbin.
@MILLERSTV5 жыл бұрын
Thank u that means alot
@Shogunnur5 жыл бұрын
@@MILLERSTV truth, in fact I decided to go another direction because y'all were so thorough, I see it's too involved for what I want to bother with haha!
@MILLERSTV5 жыл бұрын
@@Shogunnur ya it's def a involved install but the out come is nice thank u for checking out my video by the way
@churchfest776 ай бұрын
What inner fender are you using to cover the back bottom side of the infer front fenders where the factory underlying metal is exposed with the XRC fenders? The XRC inner fender liners only cover the top half of the fender well.
@MILLERSTV6 ай бұрын
These came with femder linners that cover it up the whole way down
@Raydawg4 жыл бұрын
I really like that armour, maybe someday my JKU will sport that
@MILLERSTV4 жыл бұрын
Thanks ya I like how it turned out to
@ranger89013 жыл бұрын
Where does the license plate go?
@davidlineberry6224 жыл бұрын
Cant wait to install ours. Nice vid ty
@MILLERSTV4 жыл бұрын
Thank u and heck ya I'm sure you'll like them
@Dingo13594 жыл бұрын
In the instructions, it tells you to drill in those corner pieces to break the spot welds..... What is the purpose for that? It doesn't appear that anything on the XRC fenders is bolted onto this area so I'm not grasping what is in the way that creates the need to bend this piece and drill holes into it. Awesome video. My fenders just came in the mail so I'll be installing soon.
@MILLERSTV4 жыл бұрын
They are spot welded to ur factory fenders so u have to drill the spot weld out so u can bolt them to the xrc fenders
@Hartleybamafan5 жыл бұрын
I have these on my 2 door. I love them
@MILLERSTV5 жыл бұрын
Ya makes for a really clean look
@Cyber_and_Iron Жыл бұрын
When’s War Woman next? Might see ya there
@majorpay50582 жыл бұрын
So looks nice, but watching the Jeep get cut up, and poked full of holes, made me a little queasy. I tend to do a lot of mud stuff in my Jeep, and I'm thinking without flares, I'd have nothing to stop that mud from going straight into the cabin (I mean, it pretty much does already, but I'm thinking this would make it 1000% worse?)?
@MILLERSTV2 жыл бұрын
Ya but not really the fenders the fact these tires stick put so far but ya I see what ur saying.
@majorpay50582 жыл бұрын
@@MILLERSTV Is it absolutely necessary to chop the fender mounts? Or could they be left?
@MILLERSTV2 жыл бұрын
@@majorpay5058 honestly bud I'm not sure I can't remember it's been so long since I put them on
@MrTrophyHusband5 жыл бұрын
Just one more question I see you used your DV8 liners. They list these as coming with a inner fender but I never see one in the parts pics did you get one with yours?
@MILLERSTV5 жыл бұрын
Ya it comes with them for the rear is all I got
@mayda27272 жыл бұрын
How did you reinstalled the antenna I have the same fenders but the guy that installed them didn’t put my antenna back😡
@MILLERSTV2 жыл бұрын
Cut the hole out
@mayda27272 жыл бұрын
@@MILLERSTV it has the hole but doesn’t have the antenna mount and it doesn’t have the holes for it was wondering if I could just glue it
@MILLERSTV2 жыл бұрын
@@mayda2727 I bolted this one back like it was originally
@chrisbaker419511 ай бұрын
Great video for this! I am getting ready to install the front ones on my Jeep. I started to take off the center Cowl and those 4 plastic push pins are really in there good! Did you have any issues getting yours off? I wasn't able to see what you did in this video.
@MILLERSTV11 ай бұрын
I belive i used a tool thats made for those push pins if im not mistaken
@MILLERSTV11 ай бұрын
And glad it could help thanks for the support
@chrisbaker419511 ай бұрын
Awesome, thanks!@@MILLERSTV
@chrisbaker419511 ай бұрын
You're welcome!@@MILLERSTV
@RichardBronosky4 жыл бұрын
13:26 Engage safety squints!
@michaelcrawford8200 Жыл бұрын
so picked up some of the smittybilt armour from a buddy and I noticed you have the DV8 inner fender grill. I was also going to try to throw those on. Did you have any issues with the two? I know you had the DV8's already installed but if you were doing both, based on your install, what would be the best plan. inner fenders first the smittybilt armour or armour first then inner fenders? Thanks, Mike
@MILLERSTV Жыл бұрын
Ya had to make them fit im home now jeeps at the shop if u will message me tom I will try help with any questions I have crap service here ut went outside didn't want u to think I would respond tha k u for the the support and watching
@nationalwranglerassociatio93182 жыл бұрын
Any compatibility issues with the DV8 inner fenders
@MILLERSTV2 жыл бұрын
No it fit all like it was supposed to
@buddhatrvn50425 жыл бұрын
What size drill did you use to drill the rear fenders
@MILLERSTV5 жыл бұрын
I believe it was a 5/8 but the instructions r purdy detailed so it has it in it but i believe it was a 5/8
@dt2834 жыл бұрын
Its actually 33/64" drill for the thread-serts
@mr.greenz65594 жыл бұрын
How do you take off the tail light off when the fenders are on looks like you have take them off again
@MILLERSTV4 жыл бұрын
The just unscrew
@mr.greenz65594 жыл бұрын
It didn't work
@wheelcities61923 жыл бұрын
What was the tool you used on rear fender nut plates
@MILLERSTV3 жыл бұрын
It's called a head riveter kit and it's made by ASTRO pneumatic tool company. Makes live alot easier for installing the nut certs
@cb7tune4 жыл бұрын
Love the video, what size Nutserts are those for the rear? also do they come with the kit from smitty?
@MILLERSTV4 жыл бұрын
I'm honestly not sure I cant remember my minds getting old haha
@dt2834 жыл бұрын
3/8"-16 thread, 33/64"s drill size
@josenina694 жыл бұрын
I installed the same fenders on my jeep thanks to your video. What fender well inserts did you use?
@MILLERSTV4 жыл бұрын
Rears inner fenders is what came with the fenders front are dv8s. And thank you glad u liked the video and it helped
@josenina694 жыл бұрын
@@MILLERSTV did you have to do any modifications to make the dv8s fit?
@MILLERSTV4 жыл бұрын
@@josenina69 ya we did a lil modifications not to much but did have to do some then even more when we put fox shocks with res on and then lil more when we put snorkel on it witch I have videos on all those if u need it
@josenina694 жыл бұрын
@@MILLERSTV do you have a video on when you installed the well inserts? I looked at your videos and didn't see anything. By the way do you live in texas? I saw your hog videos and the scenery looks similar to south texas
@MILLERSTV4 жыл бұрын
@@josenina69 no live in north ga and ya I do it's under the playlist for the jk buikd
@luismasterbike65685 жыл бұрын
What kind rivet nut tool did you use?
@MILLERSTV5 жыл бұрын
It's an astro pneumatic tool company 1452
@alonsojaquez67754 жыл бұрын
What type of inner fenders do you recommend for this type of armor?
@MILLERSTV4 жыл бұрын
Dv8s
@alonsojaquez67754 жыл бұрын
My jeep already came with the armor would i have to modify those to make them fit?
@MILLERSTV4 жыл бұрын
@@alonsojaquez6775 ya I have video up on how we did
@Boobienoobie1473 жыл бұрын
How big are those tires? I dont want to get them and my tires look too small under them
@MILLERSTV3 жыл бұрын
35s
@Boobienoobie1473 жыл бұрын
Yeah sorry I read further down in the comments
@MILLERSTV3 жыл бұрын
@@Boobienoobie147 no problem at all bud thank u for the support
@MrTrophyHusband5 жыл бұрын
Thanks this is a big help. What size tires are you running your jeep looks great. I have 35s and wanted to know it it would look ok with them
@MILLERSTV5 жыл бұрын
3157017 basically a 35.
@MrTrophyHusband5 жыл бұрын
@@MILLERSTV Thank you your jeep look great. Im finally going to install these
@MILLERSTV5 жыл бұрын
Your welcome and thanks. Keep me posted on how u like them
@QueakScope5 жыл бұрын
Have you found any aftermarket hood latches that fit in these front fenders? I tried installing the Rugged Ridge XHD hood catches & they didn't fit in the holes. I really don't want to have to cut into these brand new fenders..
@MILLERSTV5 жыл бұрын
Ya it has aftermarket on it if u will remind me.tom I'll take a pic and send it.to u on here
@QueakScope5 жыл бұрын
@@MILLERSTV yes please, and if you can get me the name so I can look them up!
@MILLERSTV5 жыл бұрын
@@QueakScope it won't let me send pic on here
@MILLERSTV5 жыл бұрын
@@QueakScope Black Hood Lock Catch Kit For Jeep Wrangler JK 07-18 From wildrock4x4.com
@QueakScope5 жыл бұрын
millerstv not a fan of the way those ones look, but thank you! Do you know of any others that work with these fenders?
@Furious_George5 жыл бұрын
My anchors just spin. Can’t tighten the bolts or take my rear fender off lol
@MILLERSTV5 жыл бұрын
Witch ones r u having probs with
@Furious_George5 жыл бұрын
The rear drivers side upper bolts. I can see the anchors spinning when I try and tighten them down.
@MILLERSTV5 жыл бұрын
@@Furious_George are u talking about the threaded incerts u have to crimp in ?that come with the fenders? And also I'm up in Alaska signal isn't good here so it may take me a while to respond but I will when ever I get signal again I'm headed towards canada
@Furious_George5 жыл бұрын
Yes. Whoever installed them didn’t crimp them in right I think.
@Baby85Mama5 жыл бұрын
How did you disconnect the antenna from stock fenders?
@MILLERSTV5 жыл бұрын
U remove the plastic cover and it bolts to the fender
@mikeleonard42444 жыл бұрын
Great jeep.. what size are your tires and lift
@MILLERSTV4 жыл бұрын
315 75 17 6 inch lift its my dads jeep I just do all the work on it lol. I have the tacoma Ive built ive done all the work myself on both his jeep and my tacoma
@mikeleonard42444 жыл бұрын
@@MILLERSTV nice, I have 37" and thinking about doing this kit
@MILLERSTV4 жыл бұрын
@@mikeleonard4244 there not that hard to install hardest part was the rears making sure everything fit good and drilling and putting the insert nuts in. It comes with a hand held tool but its a pain to use id highly recommend getting the tool like i used in the video save u alot of time and headache
@mikeleonard42444 жыл бұрын
@@MILLERSTV what tool are nutsert size?
@MILLERSTV4 жыл бұрын
@@mikeleonard4244 I cant remeber but that kit I used in the video came with like 6 different sizes and one of them fit.
@JohnnyAnderson13 жыл бұрын
could you not just rivet them to the body?
@MILLERSTV3 жыл бұрын
What do u mean
@JohnnyAnderson13 жыл бұрын
@@MILLERSTV just drilling the holes in the rear quarter panels and installing the flairs with regular pop rivets.
@MILLERSTV3 жыл бұрын
@@JohnnyAnderson1 no cause the but certs are threaded so they hold stronger
@matty86suk4 жыл бұрын
It would look better if the hardware were black.
@camronbay13 жыл бұрын
I’m taken them off to much weight.
@MILLERSTV3 жыл бұрын
Have u not done a regear ??? This has 4.88 with e locker front and rear the gearing makings a huge difference anytime up grade that should be a first step in the build
@camronbay13 жыл бұрын
@@MILLERSTV I really want to do a hemi swap what do you think of the new Jeep 392.
@MILLERSTV3 жыл бұрын
@@camronbay1 honestly haven't had any time with them so idk ive seen alot of people doing the swap though
@camronbay13 жыл бұрын
@@MILLERSTV Well one of my friends did the swap the Jeep goes like hell it is a amazing Jeep.