This video was MONEY!!! Best one I’ve seen. I’ve done this job before but I forgot how I did evrything. I have to get in there again now after a few years to replace the shift fork. Pray I don’t mess up lol
@ATEMOFFROAD4 ай бұрын
@@tylermorris9196 thanks for watching 🙏🍻
@jdfreeman973 жыл бұрын
Came from Facebook and its a good video. Ive watched 10+ of these videos in the past 72 hrs and this one is definitely complete and correct. Nice job
@ATEMOFFROAD3 жыл бұрын
Very cool , thanks for watching, sounds like you’ll be doing this upgrade soon! That’s awesome! Cheers 🍻
@tuefelhunden3391 Жыл бұрын
Definitely still the best video. Putting mine back together tm and just found your video. Good stuff.
@the_bencredible3 жыл бұрын
Thanks for all your how to videos. Adam’s driveshafts and a advance adapters SYE is the next upgrade for my TJ.
@ATEMOFFROAD3 жыл бұрын
@Bencredible_Jeep_Adventure Thank you I really appreciate you coming back and watching! I’ve herd good things about the advanced adapters sye , I bought this in a one box kit from Adams driveshaft! So far it’s been good no hard wheeling yet, but that’s coming
@BottleJackBuddy2 жыл бұрын
Great video! Thank you for sharing it! 14 min mark I saw a pretty awesome tool on your Bottle Jack!
@ATEMOFFROAD2 жыл бұрын
Thank you , I really appreciate it! I absolutely love my little buddy Jack tool! I use it for everything. Considering getting another one for my trail bag! Thanks for watching 🍻
@oscarr.blancog.480 Жыл бұрын
Saludos excelente explicación, tendrán vídeo de como modificar una Jeep cherokee XJ 4x2 a 4x4?
@BodiTriggerfinger Жыл бұрын
Thx for the video, now I know what I have to do to eliminate the vibration and sound…. Dang
@ATEMOFFROAD Жыл бұрын
This will do that 🍻
@ryanellis59023 ай бұрын
Is it the same procedure for the 242J? It has the extra 4x4 setting, 4 hi-part time and 4 hi-full time..
@davidlange21872 жыл бұрын
Thank you for showing the tools and supplies that can be helpful.
@ATEMOFFROAD2 жыл бұрын
I knew it would help someone, thank you for watching I appreciate it 🍻
@matiasodell8564 Жыл бұрын
Your absolutely amazing mechanic!!
@ATEMOFFROAD Жыл бұрын
Thank you 🍻
@msc10644 ай бұрын
How did you know how long of a drive shaft to buy after installing the transfer case?
@ATEMOFFROAD4 ай бұрын
When you go to order your SYE and Cardon driveshaft they require you measure the distance from Transfer case to rear pinion yoke. Shows how to do that in the listing www.adamsdriveshaftoffroad.com/collections/jeep-products/products/advance-adapters-sye-kit-solid-u-joint-1310-cv-driveshaft-package
@dogshmog4 ай бұрын
Purple power is awesome.
@daviddebuhr8995 Жыл бұрын
Nice video. I'm going to do this on vehicle but this really helps!
@DRie-y5y11 ай бұрын
I'm new to rebuilding anything, is there not a gasket for the case halves? Like do I have to use the tubes?
@fredbanuel40012 жыл бұрын
Before start tearing apart in what position the transfer needs to be ? 2wd , 4low , neutral or doesn’t meter ?
@ATEMOFFROAD2 жыл бұрын
I placed it in 4low I mentioned this during the removal of the transfer case in this video @4:18 kzbin.info/www/bejne/jnmQoq1rdtqSrtk
@SunCityOffroadRecovery2 жыл бұрын
Ah I did my sye kit a while ago and now I noticed the front output shaft has a tiny bit of play. I gotta pull the whole thing apart again to change that front bearing? I'm an auto tech by trade but that was my first time opening up a tcase. Nobody ever wants to fix em just swap in a used one lol. I'm pretty good at cheating the service info just wondering if any of y'all have done those particular bearings. I'm a lil lazy working on my own stuff and damn I'm ready to hit the trails. I spend all day fixing other people's cars so when it's my turn for my stuff I'm tired haha
@ATEMOFFROAD2 жыл бұрын
If I remember correctly the front is the same as the rear, once you remove the outer seal, snap ring and split the case halves the bearing can be removed and new ones dropped in , I do not know if the bearing needs to be pressed in but I’d plan to have a press handy when doing the job. But I’m pretty sure it’s tapped in and out of the case half. Good luck and thanks for watching 🍻
@SunCityOffroadRecovery2 жыл бұрын
@@ATEMOFFROAD I think I'm gonna rebuild it with the wide chain kit and 6 gear planetary. I'll run it like this till I save up enough to do so a long as it's quiet enough. The jeep was rough when I got it and whatever I replace I do quite a few steps above stock. I just can't help myself lol.
@ATEMOFFROAD2 жыл бұрын
@@SunCityOffroadRecovery a total rebuild would be the way to go if within reach, do you have a link on that kit. I have an xj here in dire need 🤣
@erikcaldwell29133 жыл бұрын
I'm going to be installing my sye this weekend . When you say to put case in 4 wheel drive before removing, would that be 4 wheel hi, or low? And I noticed you didn't have to cut that round shift stub down to an inch, like some do( I guess that's only if you don't have enough clearance when it's all the way in 4 wheel drive??) Oh and thanks for the great info, I wrote down everything, step by step👊🤓👍
@ATEMOFFROAD3 жыл бұрын
Yes because it helps with getting everything aligned when putting back together and keep the TC in locked in 4lo. As for cutting I suspect that would be need to be done on older 231 TCs . I would just measure it and see for yourself and if so cut it! Thanks for watching I appreciate it 🍻
@msc10644 ай бұрын
Does this come with gaskets instead of using RTV
@jeremyhanna38523 ай бұрын
Nope not even new the factory it's glue only
@mowglylopez8531 Жыл бұрын
Bro do I need to replace the drive shaft too. ???
@ATEMOFFROAD Жыл бұрын
Yes
@michaelfrench34310 ай бұрын
Very informative, great video
@ATEMOFFROAD10 ай бұрын
Thank you 🙏 🍻
@BrandonDrew87 Жыл бұрын
@atem offroad looking at a tj tomorrow that allegedly has a busted t case. Is there anyway I can ruleout manual trans problems without the t case working?
@ATEMOFFROAD Жыл бұрын
Sweet find, TC is the last line of output to the front and rear wheels , Is the housing cracked/ leaking? Chain disconnected? If the Chain is disconnected you may be able to still drive it , just no 4x In the front. Housing cracked. Not a good idea to drive. The TC can be removed then the trans can be checked unfortunately it will be under no load.
@BrandonDrew87 Жыл бұрын
@@ATEMOFFROAD thank you for your quick reply! The tj is an 01 with 4.0 which allegedly runs great. The jeep has a good title, 50% tread on off brand 35's, cut front fenders, and the body/interior is a 6/10. The gentleman is asking $2500, surely I can't go wrong at that price right? (I'm in Florida BTW land of the 16k rusty yj)
@ATEMOFFROAD Жыл бұрын
@@BrandonDrew87 yeah a TC should be fair easy to get ahold of at 2.5k that’s a sweet deal. Unherd of around here
@BrandonDrew87 Жыл бұрын
@@ATEMOFFROAD if it's not totally rotted and the paperwork is good I'm gonna jump on it. If it's not the jeep for me, I'll fix it and sell for a smooth profit. Thanks again
@ATEMOFFROAD Жыл бұрын
@@BrandonDrew87 good luck and welcome to the channel 🍻
@duanemcconnell122710 ай бұрын
Really good video
@ATEMOFFROAD10 ай бұрын
Thank you 🙏
@SunCityOffroadRecovery3 жыл бұрын
You didn't need to cut down the shifter shaft where it goes into the stubby rear case?
@ATEMOFFROAD3 жыл бұрын
No that’s will be on older transfer cases, thanks for watching
@SunCityOffroadRecovery3 жыл бұрын
@@ATEMOFFROAD what year is yours? I just picked up a 2000
@ATEMOFFROAD3 жыл бұрын
@@SunCityOffroadRecovery there were a few 231 that didn’t need to be cut. If your in 4lo and the shaft sticks out of the case more the 1” will need to be cut not sure why some and some didn’t have to be cut . Mine didn’t
@SunCityOffroadRecovery3 жыл бұрын
@@ATEMOFFROAD I remember that measurement... that's why I asked lol. First one I've seen that didn't cut it or mention it. I'm not even sure what all mine has a far as driveline. I'm waiting on my lift kit to get here before I go mess with it. I got quite a few parts to install
@ATEMOFFROAD3 жыл бұрын
@@SunCityOffroadRecovery that’s awesome are you on Instagram? I like checking out other builds . Thanks for watching 🍻
@vagnerangelovsa Жыл бұрын
Good job brother 👊🏻
@ATEMOFFROAD Жыл бұрын
I appreciate it! 🍻
@koolcat789563 жыл бұрын
What c clip pliers did you use
@ATEMOFFROAD3 жыл бұрын
www.amazon.com/dp/B00209ETSS/ref=cm_sw_r_as_gl_api_glt_fabc_3DGHRQ2PY8CBDMGQCY7E?linkCode=ml2&tag=atemoffroad-20. Thanks for watching 🍻
@dustytrailscactusron3 жыл бұрын
Great video!
@ATEMOFFROAD3 жыл бұрын
Thank you 🙏
@cgonzo8013 жыл бұрын
👍🏼
@ATEMOFFROAD3 жыл бұрын
Thanks for watching bro , now it’s your turn to do the swap! Cheers 🍻
@cgonzo8013 жыл бұрын
Yeah your right . You make it look easy time place the order soon
@ATEMOFFROAD3 жыл бұрын
@@cgonzo801 it’s possible to do the swap in the jeep but I don’t recommend it if it’s your first time! But it’s definitely faster bro!
@darrentylor5473 Жыл бұрын
Oh sure, now they show us the easy way to handle that oil pump and filter... No, really, thank you... It's a lot of screwing around otherwise