HOW TO: install the E Flite Timber X/Night Timber FLOATS

[@DronemanJoeRc]

My fishline is way to short they tow the rudder way to inward. Any tips?

[@KB_RC]

Well, I would just go buy some at the store, and re-tie / re-knot it. I’ll update this comment when I get home later to see it and think about what else I would do. Talk soon !

[@DronemanJoeRc]

@@KB_RC thanks bud. what I did and I only need about a 1/2 inch I got a hold of the knot and pulled it and it moved about a inch and that gave me enough slack to get them secured to the rudder. Thanks again and good video!!

[@KB_RC]

@@DronemanJoeRc Anytime!!! You got it figured out? I’ll still go check when I get home. Thanks !

[@DronemanJoeRc]

@@KB_RC I noticed in your video that when you turn the rudder the one float rudder didnt turn. I know what you did and I would loosen the screw just a tad on the float rudder screw and it should take care of that issue.

[@KB_RC]

@@DronemanJoeRc Yes! I did have that issue… and I did fix it that way !

[@ama409573]

😲

[@skyartrc8286]

You can call them spars or spreader bars😀

[@KB_RC]

Ok I will ! Thanks!!!