How to Install the K&N 63 Series Air Intake on a Chevy Silverado

[@ashleymassaro1063]

I just installed my 63 series aircharger into my 2015 ford Expedition 3.5l ecoboost. It came with all of the parts, was extremely easy to install myself and I noticed an increase in acceleration. I'm very happy with it.👍👍👍

[@gamer6654]

It attacks when you're sleeping Does it sound louder as well?

[@galenyoung7917]

After I had the exhaust work done, I then installed the K&N air intake on my 454 dully. It would break all four wheels loose and pull a 40 ft trailer like it wasn't even there. Amazing!

[@brockhatle5267]

I love how realtruck responds to your questions and has wonderful step by step installation videos 10/10

[@Realtruck]

Brock Hatle thanks! You can continue to ask on here or If you have any questions about any of the 500000 plus accessories we sell feel free to contact our knowledgeable Customer Service folks at 877-216-5446

[@carloscampos9297]

Excellent video! Just installed my new CAI, this video made it super easy. Finished in about an hour

[@alexh5745]

Great tutorial on this installation, never even read the instructions that came in the kit. I really like the intake kit, has a great sound when accelerating. The wife will be driving the truck for the next week to see if the mpg actually does increase. Prior to install our average mpg for the last 400 miles was 18.4 mpg and last 50 miles was 19.7. Now that I have the K&N installed, I haven't seen above 14.4 mpg but I have gotten into the throttle a bit. We'll see if it actually does increase mpg as many say it will.

[@Realtruck]

Alex H understand completely. My truck gets worse mpg's after putting exhaust system on it, lol, but it sounds soooooo good when I rap it up now. Let us know how it goes for ya with the wife driving. Glad the vid was useful for you as well. If you have any questions about this or would like more info on this item or any of the other 500000 plus accessories we sell and would like to speak to a person directly feel free to contact our knowledgeable Customer Service folks at 877-216-5446

[@jtr-fw5th]

This is one of the best install videos that I have watched.

[@Realtruck]

jtr1536 thanks a lot! We try to do our best to make these easy for everyone. We really do want to sell you guys products, but we don't want you to be frustrated and po'd because it sucks to install. You can also find out more about this product right here: www.realtruck.com/k-n-63-series-aircharger-high-performance-air-intakes/?HowtoInstalltheKN63SeriesAirIntakeonaChevySilverado& and If you have any questions about this or any of the other over 500000 accessories we have available, please feel free to call us at 877-216-5446 and one of our awesome knowledgeable Customer Service gurus would certainly love the chance to help you.

[@benwood1777]

Best video showing install, by far. All others lacked detail

[@1997SScamaroNOS]

Thank you . Your video has helped me with my 2015 Silverado 4X4 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@codyhall5912]

Does it take some time for your mass air flow sensor to get the engine adjusted to the right mixture?

[@Realtruck]

No the computer immediately recognizes the increase in air flow and makes adjustments accordingly, thanks :)

[@PiTaReX]

A great video. but does the filter ever get wet from the car wash or weather being exposed like that ??makes me wonder. thanks

[@Realtruck]

Hey, Peter! We asked one of our experts who has this same set up on their 97 Ram. Water exposure was never an issue for them. We hope this helps.

[@jamalthigpen1966]

What if you just have the head of it

[@jaywelds7482]

Did you notice a difference on throttle response with new filter

[@alfredojuarezjr7228]

I just installed my K&N on my 2014 Silverado and my cruise control is not working. Does the K&N install affect my cruise control?

[@stonemtnrubicon]

Does the battery cable the neg..cable need to be removed then out back on???

[@kevincosgrove5026]

I have a 2012 Ford f150 truck can I use the stock air hose n will it mess up the mass airflow

[@robphillips1256]

I own an 2018 Titan XD and ordered K&N 63 series intake. Instructions are not clearly stating of how to remove engine cover, sensors. Also none of your videos shows a Titan. Just chevy, gm, ford and so on. I can turn a wrench with the best of 'em but I don't wish to break stuff trying to take it off to in stall. On instructions it says lift engine cover off. It's somehow fastened to top motor. Where are the mounts ? Sensors - How does the clip without breaking it work for disconnect.

[@GTOLONNY]

They should have done a dyno pull

[@fike301]

I pushed the hoses down over that first ridge on the intake... Only made sense me

[@Jcestanley]

Excellent video. I just needed to verify a few things while installing mine. If I may make a suggestion...please add where to use the washers and lock washers. The instructions do not say and I visually saw where you used yours but it was sketch. Overall great vid. Thanks.

[@andrewbiro123]

Yes, I noticed that too. Great question.

[@todd8781]

Very good video! I have a different GM SUV, but very good video! Thanks!

[@jacksonsilvey2865]

I lost the red clip on the wiring harness that locks the air flow sensor wiring into place. Do you know where I can buy a new one?

[@Realtruck]

+Jackson Silvey possibly the dealership, a wrecking/salvage yard, or a parts house such as Autozone or PepBoys, however, I usually don't reinstall those anyway. As long as it locks in with the clip on the harness it should be fine.

[@jefferylangford8631]

Do you need to disconnect the negative battery terminal prior to beginning to delete all of your prior settings?

[@andrewbiro123]

I did not. When I finished and started the truck up everything was perect...no codes. So I say no you do not have to, I think thats just covering their butts. Of course it can't hurt though.

[@S_A_L_A_Z_A_R300]

Hello real truck , What else can you do to a chevy silverado to get better mpg

[@Realtruck]

Hey there, we'd like to recommend the Hypertech Max Energy Programmer on economy mode! realtruck.com/p/hypertech-max-energy-programmer/

[@littlebitofeverything652]

i got a 63 series for my 2012 chevy 1500 Z71. i got it installed and set love it. my question is , is it ok and safe if i remove top box lid , it looks way better and i think also it will suck in more air , what do you suggest??

[@Realtruck]

Little bit of everythin g the lid is designed so that it draws in more cold air if you remove it it will draw air from under the hood which is much warmer. Cold air produces more HP. No it won't hurt anything and is not recommended by the manufacturer, but it is yours.

[@littlebitofeverything652]

RealTruck.com got ya ,thank you

[@AlejandroRomero-vh5fj]

Do u have to add bigger fuel injectors or just air intake

[@Realtruck]

***** No. It is not necessary to add bigger injectors. The theory is that colder air makes more horsepower. By installing these Air Intake systems you allow more air and colder air into the intake and such it increase horsepower and depending upon your driving habits fuel mileage.

[@danielgamez9167]

Great Video!!!!! will install a K&N on my 2018 Z71 Silverado Thanks ...

[@Denjay2]

I have a 2014 chevy 2500 6.6 & What happens/if you don't put the heat shield cover on top? will damage it your engine etc? or its fine not putting it . or required?

[@Realtruck]

+Denjay Ferrer Not sure what you mean here by the heat shield, but if you are referring to the cover on top of your engine, nothing will happen. That cover is on there to simply give your engine compartment a cleaner look. Heat shields on the other hand are designed to protect vital engine components from excessive heat which can cause premature failure of the component. This could, in fact, damage your engine depending on the components function.

[@Rodriguez88m]

Good job you basically installed my air filter

[@Realtruck]

Marcus Rodriguez: Glad we could be of assistance!

[@blakepalmer9787]

Thanks for the video Perfect instructions

[@Realtruck]

Glad it helped!

[@southernindianadipper4453]

Are cold air intakes vital for the truck? I have one in my 2015 Silverado 2500 and a friend said it's useless...🤔

[@Reality---]

Its a guaranteed 10 to 20 HP increase Because cold air is better for the engine than normal temp air or hot air

[@rbernardo1040]

I’m debating whether I should get this. I heard some pros and cons. One con I heard that it makes your “check engine” light come on. And I also heard that it makes your vehicle feel like it is about to turn off on you. Is it true?

[@Realtruck]

Ray, I haven't heard of any codes being thrown or causing problems with your truck acting like it will turn off. Sounds like something else is going on there. We've had plenty of customers purchase these with no problems.

[@andrewbiro123]

Check all fittings to make sure there is no leaks, then re-set the code. You should be fine.

[@WilsonConstructionSD]

I bought the K&N kit from Summit for my 2008 Silverado 1500 5.3L V8, are these instructions the same? If not do you have a video for that? Also it came with the CARB sticker for smog, but didn't say where its supposed to be. Is there a spot where it legally supposed to be visible? Thank you.

[@Realtruck]

+WCSD as long as it is the 63 series it will be very similar. The CARB sticker goes on the cover that goes over your upper radiator support and has all the push plugs holding it on.

[@handymanservice83]

what series do you recomend me for a 08 silverado 5.3 v8

[@Realtruck]

We have a handful of options but this is something we'd recommend you speak with a product expert on - www.realtruck.com/air-intakes/chevy/silverado-1500/2008/ You can chat in and get some help, just follow this link! livechat.boldchat.com/aid/479076400660299356/bc.chat?resize=true&cbdid=3544376062367484149&wdid=2530769481654572265

[@herox1337]

i have a 14 silverado with the data bar that shows mpg getting about 21ish on high way will the computer also recognize this and have a increase to that number saying 25ish or will it not say it?

[@Realtruck]

Travis Oakes fuel mileage is computed by the computer based on alot of variables. Yes it will recognize this increase in airflow and adjust accordingly to show the correct MPG's. If you have any other questions about this or would like more info on this item or any of the other 500000 plus accessories we sell and would like to speak to a person directly feel free to contact our knowledgeable Customer Service folks at 877-216-5446

[@spitfireman111]

Which model is best for the 5.3?

[@El.compa.chuy.21]

Quick question.. Shouldn't you have to put some hose clamps on the new hoses you put onto the pcv valves? Sorry if it sounds dumb but I'm just curious since the oem hoses were clamped onto the stock unit..

[@Realtruck]

+Juan, I would assume they were put on it just was cut during editing. Normally yes you would want to have the hoses clamped on.

[@El.compa.chuy.21]

RealTruck.com oh okay sounds good. Thank you for the response. Think we would have a chance of having this intake set up legal for Cali drivers?

[@Realtruck]

We might be able to get you one. Give us a call at 877-216-5446.

[@El.compa.chuy.21]

RealTruck.com awesome! I'll give you guys a call tomorrow, lead at work is breathing down my neck at the moment lol

[@andrewbiro123]

I thought the same thing watching the video. I had some so I threw them on.

[@Junior-zg5eb]

Im buying this cold air intake from a guy on Offerup, he doesn’t have the MAF gasket. Is it okay if I still install it without it? Let me know please.

[@andrewbiro123]

On my filter, although it came with the gasket I did not need it. You will know right away if you'll need it. The gasket will not fit on the pipe if it's not needed, and the MAF won't fit if you do. I bought the chrome model, I believe the black model does require it.

[@87luxurysport]

hi i installed the new K&N intake and noticed my MPGs went down alot. i would use about half a quarter tank to work and back now its using over a quarter tank and thats just cruising speed any recommendations? thanks

[@Realtruck]

+87luxurtsport, There could be so many different possibilities as to what is going on with your vehicle. The best people to contact would be K&N. They are better equipped to troubleshoot any problems you might be having with your intake system.

[@87luxurysport]

not12u thanks its back to normal now

[@CarlosPerez-wb3qd]

Will this same model fit my 2017 Silverado 5.3?

[@Realtruck]

Hey Carlos! Yes it should fit, let us know if you want some help ordering

[@walbertoandino2386]

The best air intake

[@Nataboop]

I'm having trouble finding a cold air intake for a 4.3 v6. Do they make it for this type of engine. If they do where can I find one? Thanks!

[@Realtruck]

Natalie Gilmore here is one right here: www.realtruck.com/cgs-motorsports-air-intakes/R181882P2000Y924MA.html Here is the complete list: www.realtruck.com/air-intakes/chevy/s10-pickup/2000/ If you have any other questions about this or would like more info on this item or any of the other 500000 plus accessories we sell and would like to speak to a person directly feel free to contact our knowledgeable Customer Service folks at 877-216-5446

[@Nataboop]

RealTruck.com Thank you! I will check it out!

[@Casey74]

I have a Question: One a hot day in the summer, when the car running, would the car absorb the hot air that coming going into the filter. Making the hot air more dense when it come into the car... Is that a bad thing???

[@Casey74]

+Kevin Comaduran Is there a difference in the air that comes into the car if the air filter is covered or uncover

[@Realtruck]

+Kevin Comaduran Cold Air means more Horsepower, hence the reason for cold air intakes, but more airflow means a better running engine and more MPG's. So with the hotter more dense air you may not get the greatest horsepower but you would get decent fuel mileage in most cases. The idea is to get a good balance that effects the HP and MPG's. Your question below is thus. It depends on how the intake system is setup. If your system draws its air from outside of the engine compartment or inside. In colder climates it is best for engine warm-up to have it draw from under the hood. In warmer climates it would be better coming from outside of the engine compartment. Whether it's better to be covered or not depends on your climate and if the vehicle has the ability to draw in air from outside the engine compartment. One thing to keep in mind is that even on those really hot summer days it is still hotter under your hood.

[@Casey74]

***** Thanks so much, i really needed the information. Thanks RealTrucks you are BEST!!!

[@Casey74]

***** When buying the Air Intake. Dose it come with an air filter?

[@Realtruck]

+Kevin Comaduran Yes, you will receive an air filter.

[@Cesar-jh1ho]

Does this also fit the 2015 V6 LT

[@Realtruck]

Cesar Yes sir! Here is the direct link to the K&N for the V6 > www.realtruck.com/k-n-63-series-aircharger-high-performance-air-intakes/R181626P2015Y734MA.html

[@zackshales6240]

RealTruck.com does it void the warranty

[@Mr96romeo]

Do you have to unplug NEG battery connector?

[@Realtruck]

Eduardo Carmona No you do not have to remove the negative battery cable. However, that being said, anytime you do any type of work with the electronics on a vehicle it is always a good idea to remove the negative battery cable to prevent the possibility of accidentally shorting out your electrical components.

[@Mr96romeo]

+Eduardo Carmona Ok, thanks for the information. I installed it this morning and can't believe the sound and throttle response.

[@Realtruck]

+Eduardo Carmona Awesome! Glad you like it. Now if you add an Exhaust System to it you will really like it. Check out the possibilities right here: www.realtruck.com/exhausts-mufflers/

[@Mr96romeo]

+RealTruck.com Put an aFe cat back on this morning

[@Jw-zn6zc]

Which series is recommended for a 2011 Silverado ?

[@k.7679]

i have 2016 taho 5.3 v8 how many Hp and TQ with tune do you think my car will gain?

[@Realtruck]

+K Buhmail it is difficult to say. K&N claims up to 50 more HP, but I have seen some studies that show some vehicles with as little as 0-3 HP gain. I would say it really varies with the vehicle and some other variables that are uncontrollable such as ambient air temperature.

[@sgreggbacchus]

@RealTruck - Is there a main difference in the 63 series vs. 77 series besides chrome pipe? I'm more interested in HP gain. I have a 2015 Sierra 5.3L. Also, will you need to make any computer changes or dyno mods to get the full benefit?

[@Realtruck]

+Gregg Bacchus the 63 series is not legal in CA or states with CA Emissions laws. But hey the 77 series has an estimated increase of 12.27 HP and the 63 is only 10.68 anyway. Anytime you open up the airflow it's going to help with HP, but to get the most out of it yes I would chip it and also open up the exhaust as well.

[@sgreggbacchus]

+RealTruck.com Thanks for the response. I'm in Ga so no worries on CA laws. I've added a MagnaFlow exhaust already. I believe the K&N website said the 77 series was only a 10.2% increase vs. a 10.7% on the 63 series? Any suggestions on how to "chip it"? Is that hooking it to a dyno or computer? What does that typically cost? And what type of shop could do it? Sorry for the 50 questions.

[@Realtruck]

Here is a list of different ones available: www.realtruck.com/performance-chips/gmc/sierra-1500/2015/ I personally like the Edge Products and these are all something you can do yourself.

[@Ramprust]

Great video! Will this fit my 2016 1500 5.3?

[@Realtruck]

We should have an application for your vehicle. Please give us a call at 877-216-5446 and we can look further into this for you.

[@pinarellorider9023]

Awesome step-by-step vid!!

[@Realtruck]

Pinarello Rider thanks! Appreciate the kudos. We are always trying to do the best we can to make this stuff easier for you guys to install.

[@taylorber1792]

What exactly does an aftermarket air intake do for you? And what would be the best model for a relatively inexpensive price?

[@Realtruck]

Taylor Ber17 this is just a few of the things it does. Guaranteed to add horsepower and increase accelerationVehicle specific design make for easy installationLasts up to 100,000 miles before service is requiredReplaces OEM filter & air boxWashable and reusable filterWorks with OEM computer systemsYou can learn more right here: www.realtruck.com/k-n-fipk-air-intake-fuel-injection-kit/ If you have any other questions about this or any of the other 500000 plus accessories we sell and would like to speak to a person directly feel free to contact our knowledgeable Customer Service folks at 877-216-5446

[@seththeamazing2563]

Hey from youlls testing does it increase MPGs. Im really looking into getting one to increase my fuel mileage but what results did youll see in MPGS.

[@Realtruck]

Seth The Amazing on our trucks it has been about 3-5 mpg's but only if we keep our foot out of the accelerator and aren't listening to the sound it makes. If you have any other questions about this or would like more info on this item or any of the other 500000 plus accessories we sell and would like to speak to a person directly feel free to contact our knowledgeable Customer Service folks at 877-216-5446

[@ManagerMatt1]

I have a 2015 GMC Sierra and i only have 1 tube off the right side... the left side has nothing... why is this? This should be idential to mine...

[@Realtruck]

+ManagerMatt1 I couldn't find anything specifically, but I am guessing it was a change between 2014 and 2015. I do know that there were a lot of changes for the 2015 models and this was probably one of them.

[@tomphan7871]

How similar is this installation to the blackhawk system?

[@Realtruck]

Tom, Not much of a difference. There aren't many different ways to install an air intake. If you have questions though give us a call at 877-216-5446.

[@bigz9215]

Do you have any Cold Air Intake systems that will work a a 08 4.3L Silverado?

[@Realtruck]

Zach N Sure do! Go here to check out all the different ones available: www.realtruck.com/air-intakes/chevy/silverado-1500/2008/

[@bigz9215]

Thanks for the link! About how much of an improvement can I hope for with the rbp volant or airraid? They seem to be the only 3 direct fit applications for my year.

[@AnthonyTadle]

do you still need to unhook the neg battery terminal? thanks

[@Realtruck]

Anthony Tadle as a safety precaution any time you are working under the hood or on electrical it is ALWAYS a good idea to disconnect the battery.

[@AnthonyTadle]

got it.. ty

[@Realtruck]

Anthony Tadle you are welcome.

[@SouthMiami37]

On my personal experience, no better mileage, no better throttle body response, no idea about Hp gain course I never run the car over 5k rpm , the only one difference is the sound , totally waste of money

[@ashleymassaro1063]

The only real things that make your car or truck faster is weight reduction and improved aerodynamics.

[@ErickSanchez-zb5mv]

Wich one do you recommend for a 2006 silverado v6

[@joseandrade7978]

Buy a v8

[@MultiSwc13]

great video just installed mine thanks 😊

[@Realtruck]

Our pleasure! Let us know if you have any questions or need anything at all!

[@hiramclarketx3200]

Are the steps the same for the 77 series??

[@Realtruck]

There shouldn't be much of a difference in the install for the 77 series.

[@rafaelmontelongo4051]

Can this be done on a v6? 2014 Chevy wt

[@Realtruck]

Rafael Montelongo Absolutely! the best part is that it adds about 10 HP to the 4.3 litre V6. You can find it here: www.realtruck.com/k-n-63-series-aircharger-high-performance-air-intakes/63-3085.html

[@blizowman1]

Do these intakes void the warranty

[@andrewbiro123]

No they do not.

[@ocojeda478]

Which air intake is legal en California?

[@Realtruck]

Lolo, There are a few that are legal in California. If you give one of our experts a call or chat we can ensure we get you the right set-up.

[@hambrgrtime]

Do I need to tune my engine after I install this?

[@Realtruck]

Good question! No need to tune your engine after install. All you have to do is install the air intake and you are good to go. Check it out www.realtruck.com/k-n-63-series-aircharger-high-performance-air-intakes/

[@miguelangel8300]

My truck would not run with intake

[@bpecka11]

How secure are those hoses you attach to the pcv valves at about 14:40? Seems like they would need a clamp of some sort. Thanks!

[@Realtruck]

Brandon Pecka the spouts that the hoses attach to actually are barbed, so yeh, they're stayin' on. If you have any other questions about this or any of the other 500000 plus accessories we sell and would like to speak to a person directly feel free to contact our knowledgeable Customer Service folks at 877-216-5446

[@dcjosh93]

will it fit with a throttle body spacer?

[@Realtruck]

dcjosh93 most definitely. Since the spacer goes in between the plenum and the throttle body it should not be a problem. That is provided the spacer is not more than an inch in thickness otherwise you may need to make some mods. You can find out more about this right here: www.realtruck.com/k-n-63-series-aircharger-high-performance-air-intakes/ and if you have any more questions about this or any of our other over 500000 products, please feel free to call one of our awesome customer service peeps at, 877-216-5446

[@shelbymysek5852]

Does the same process/installation apply for 2007-2013 V8 Silverado's?

[@Realtruck]

+Shelby Mysek There may be some subtle differences depending on year of truck and engine size, but it should be very similar.

[@AlexKarenMaia]

Thank you so much, very easy thanks to your guidance

[@Realtruck]

Alex Figueiredo thanks. That is the whole reason we do these vids. We want you guys to be able to get the most from your vehicle with the least amount of frustration and busted knuckles as possible. Hope you are enjoying your new AIS and If you have any questions about this or any of the other over 500000 accessories we have available, please feel free to call us at 877-216-5446 and one of our awesome knowledgeable Customer Service gurus would certainly love the chance to help you.

[@MrGrantman89]

what the number for the 6.2

[@Realtruck]

+Grant Munschauer www.realtruck.com/k-n-63-series-aircharger-high-performance-air-intakes/R181626P2015Y734MA.html Click the link to the exact part number for the 6.2. This will give you an extra 13.78 Horsepower

[@impulsivegaming6926]

would this work on a 2017

[@Realtruck]

If you've got a 2017 Silverado 1500 it should depending on your engine size.

[@impulsivegaming6926]

RealTruck.com I have a 5.3 v 8.would that work?

[@impulsivegaming6926]

RealTruck.com sorry should have specified the first time

[@bullygen]

Thanks!

[@Realtruck]

No problem!

[@joshbraswell152]

Push it real good

[@williamlewis6859]

is the the 63-1561 series?

[@Realtruck]

William Lewis this one is the 3082, but that is just a part number for YMM of vehicle. The 63 series is just that a 63 series regardless of the number that follows. If you have any other questions about this or any of the other 500000 plus accessories we sell and would like to speak to a person directly feel free to contact our knowledgeable Customer Service folks at 877-216-5446

[@Triple88a]

Good god man i havent seen anyone throw the maf sensor around so bad since i went to the junkyard lol.

[@Bubbmann]

GO BISON

[@alexandersmith7891]

Lol hours later 🤣

[@Scottypowpow]

I don’t think he’s a real mechanic haha

[@KP-nz2we]

Is this the right series air intake for an 2006 impala SS?

[@Realtruck]

Unfortunately we don't sell car parts, only truck, jeep ans SUV so you'd need to reach out to K&N direct to be find out.

[@cereid85cr]

Can this upgrade work with a oil catch can?

[@Realtruck]

Yes, you should be able to use an oil catch can with an upgraded air intake.