Рет қаралды 296,141
Buy WOLO Air Horn: www.realtruck.com/wolo-air-hor...
The Wolo Bad Boy Air Horns offer you the latest in air horn technology. Bad Boy horns use a one-piece design that eliminates the need for hoses. A Bad Boy horn can be installed in minutes by simply transferring the factory horn wires to the compressor. Mounts with one bolt included in kit.
Bad Boy air horns produce a powerful dual tone air horn sound that is two times louder than your factory horn. The Bad Boy is compact enough to fit any 12v car, truck, or even motorcycle. For those that want a dressier look, Wolo also offers a chromed version of the Bad Boy that will brighten up any engine compartment or motorcycle. The heavy duty maintenance free compressor Wolo uses on the Bad Boy air horns will provide years of dependable service.
Check out our Promotions and Deals: www.realtruck.com/lets-talk-tr...
Subscribe to our Channel: / realtruckcom
Follow us on Facebook: www.realtruck.com/facebook/?ut...
Follow us on Twitter: www.realtruck.com/twitter/?utm...
Follow us on Google+: www.realtruck.com/gplus/?...
Give us a call at
How To Install the Wolo Bad Boy Air Horn
Video Transcription:
John: Hey guys, John, here with RealTruck.com. Today I'm going to show you
how to install this Wolo electric air horn onto a Dodge Ram truck. Okay, guys. We all know how our factory horns sound, something like this. [hornsounds] But we kind of want something a little bit cooler on our Dodge truck. So that's why we're going to put that Wolo Bad Boy electric air horn onto this truck. Then when we get done, we'll let you see what it sounds like.
The first step of replacing any factory horn is to get it out of the
vehicle. I've gone ahead and taken this one out so you can see what's going on because it's buried deep in this fender. They're not all in the same location. You'll have to track down the location of where yours is. So once we've got this out, what we want to do is go ahead and unplug it. That way we can use the factory installed horn wiring which will allow us to continue to use our horn button on our steering wheel.
What we need to do with our factory wires because we're going to use the factory horn button is go ahead and cut these ends off. Then we'll need to crimp on some of these spade style connectors onto our wire. The reason why we need to do that is because our new horn system has these spade ends on it for negative and positive. We need to have something other than the original wire clips which obviously don't fit.
Now depending on what make and model of vehicle you have, yours may have a style like that or it may not. We're going to go ahead and snip these wires off of here. In this instance, because we're not going to have enough space in between these, what we're going to have to do is we're going to have to strip this back a little bit to give us some room to open these up where it'll go into our new horn a little bit better.
Once you get those apart, give yourself a little bit more room and where to work with, go ahead and strip those back. We'll attach the spade connector which you can get at just about any hardware store or your local automotive store. You can see these . . . they call them factory fender plugs or something along those lines. What we're going to do is we're just going to pop that out. There will be a hole there where we can fit our new horn perfectly right in there with the bolt that it comes with for mounting.Right now we're going to go ahead and hook this up.
Now if you look down inside here, you can see that these are marked plus and minus. Of course, your black is going to be your minus or your ground, in this case. So we're going to make sure we plug that one into the corresponding connection spot. The other one will go onto our positive side.
So what we want to do is go ahead and pull this body plug out of here. Don't worry about it if you accidentally cut it off or whatever because you're not going to reuse it anyway. This is the mounting bracket for our horn right here. We're going to go ahead and slide that up underneath there and put our bolt through. Once we have that in place we can go ahead and finish bolting it up. Not keep in mind you don't need to over tighten that because it's not going anywhere. We've got it wired up. We've got it bolted up. Let's go push the button and see how this thing sounds.
Okay, guys, there you have it. That's all it takes to install that Wolo electric powered air horn onto your car or truck. So until next time, happy motoring. 866-554-0581 Free shipping for orders over $100!