How to Install Vespa GTS 300 2024 model Lowering Kit

[@TheKRU251]

Just done this mod to a friends '22 GTS 300 HPE Super. The bolt that retains the now lowered shock mounting itself needs the retaining screw Locktiting . Reason ? It isn't that tight from factory !!!! Ours was able to back off. But, a good video. Nicely done. Thanks !!!!

[@Mrsarapvlogs]

just to make sure its tight! :) Thank you!

[@fasteddylove-muffin6415]

It's taken awhile but I'm starting to like this color. When I finally get a Vespa this would be my first choice.

[@Mrsarapvlogs]

At first I’m not 100 percent with it. But later on I realized its a nice color. Ride safe! Update me when you get your vespa!

[@fasteddylove-muffin6415]

@@Mrsarapvlogs Same. Took awhile. I will let you know.

[@brahimmonsef4940]

​@@fasteddylove-muffin6415❤

[@joediepoole1237]

Wow a full English video, thanks kuya

[@Mrsarapvlogs]

I want you to understand some of my videos. 😂😅

[@mrbmac1970]

I have also fitted this lowering kit & been using scooter for the past year with no problems whatsoever even with pillion on rear these brackets are very safe. I purchased mine from sip Germany. The only thing is you can't fit this kit with an aftermarket exhaust like scorpion or akrapovic. Can only be used with standard exhaust. Great video buddy & safe riding 👍

[@mikebomac]

Nice! Thanks for sharing.

[@Mrsarapvlogs]

Anytime!!

[@sjparki]

the mount on the rhs is twisting around as you tighten the other nut...this will change the length of the shock, mess up handling and wear the tyre early...

[@Mrsarapvlogs]

So are you suggesting this kit is not advisable?

[@sjparki]

@@Mrsarapvlogs im simply advising that the plate you bolted on needs to be properly secured so it cannot move. if it does move or comes loose then handling and tyre wear will be bad and possibly dangerous. it really needs a 2nd fastener to stop it rotating

[@Mrsarapvlogs]

@@sjparki oh i see thank you! I double checked everything and they are. Thank you for guiding!

[@intelnew]

I guess problem with left side bracket is the shock absorber ring may hit the engine block if the cushion rubber is weak or worn out

[@Mrsarapvlogs]

Need to keep checking everytime i wipe it 😂 What do you recommend to get to lower it more?

[@dclee9836]

what do you do with the side stand? after installing lowering kit, the side stand just hold the vespa too straight up, any chance you found the solution to this?

[@Mrsarapvlogs]

Ill make a video for you. Stay tuned. 😁

[@mick4327]

How tall is your dirlfriend? I want to buy me the same Vespa...

[@Mrsarapvlogs]

5flat 😊

[@jorgedelgado3357]

Why would you like to lower a Vespa? You should keep the ground clearance to avoid hitting something when inclined in curves. Big mistake.

[@Mrsarapvlogs]

Not sure if you heard it on the video. My fiance is not that tall. It’s her vespa and I want her to be comfortable riding it.

[@fazlimahmud389]

The lowered the stable it is for cornering😊

[@gvoluto2816]

Ich bin nach 3 Minuten eingeschlafen

[@Mrsarapvlogs]

😊 english please.

[@martinvrbka5329]

that's like 1cm lower 🤷🏽‍♂️

[@Mrsarapvlogs]

Still works lol

[@josephgeorgeejr7039]

Idk bud..thise brackets don't look very substantial, please be careful

[@Mrsarapvlogs]

thank you for your input! do you know any other way to lower the vespa? lowering coil overs? I need to make my fiance ride it comfortably

[@josephgeorgeejr7039]

Wish I did, iam just saying those look like pretty thin, I might got a bad perspective on video, but they just appear slim thin to me, but I know kuba lower links for road bikes, iam not sure they have any for scooter, but you could call them if you don't trust the links you got, iam not trying be negative, I was genuinely concerned about look those, but please use your best judgment!

[@Mrsarapvlogs]

@@josephgeorgeejr7039 will definitely check it out! Thank you ! Ride safe!