HOW TO INSTALL WALL PANELLING TO STAIRS - EASY STEP BY STEP

[@homeimprovements]

Links in the description for the tools required

[@pww9962]

Do you have a video covering, wainscoting a staircase ( decorative mouldings) 👍

[@homeimprovements]

@@pww9962 will be doing one very soon 😁😁👍🏼👍🏼

[@TheMMMills]

Any recommends on good filler your using or any? And what grit sandpaper you using would you say? @homeimprovements

[@mark70rich]

What would you do with a pronounced slope on a stringer where the stairs turn 90°?

[@sophiasophia6049]

What chalk line do you use please ? The link is broken

[@BoyettMultiServicesLLC]

I would say that I am an intermediate DIYer,and I have watched so many videos on paneling my stairs. Yours is the first that is explained in a clear and logical way. This video made it so easy to follow and duplicate. Thank you so much for all your help!

[@stephan20008]

I know you guys will probably miss this notification, but.. you're the best. This is the first KZbin tutorial I've ever followed due to the fact you explain it so well and basic to people like me with no carpentry experience. I never had a farther figure to learn stuff like this off so thank you so much, guys. Your videos are helping people like me prosper.

[@homeimprovements]

Thank you for your support, comments like these make our day 😊

[@stephaniehoran5103]

I have been looking for months how to do this im rubbish at maths ect and could never find a video to help me, I love how you show every last detail absolutely class I love it and you repeat taking the time to show it all, ❤️

[@homeimprovements]

Great to hear! 😊🙏🏼

[@MsSquarer]

Total beginner here with woodwork...I'm watching with great interest! Must finish this house!!!

[@homeimprovements]

Good luck! 😊

[@sabinehobden-dj5sr]

We followed your instructions step by step and our panelling looks awesome. Thank you.😊

[@homeimprovements]

That’s awesome 😁👏🏼👏🏼👏🏼

[@jamespearce40]

Brilliant! I'm confident I can do it now. Thanks for the tips. Far too many people over complicate the way to do it.

[@homeimprovements]

Appreciate the comment 😊🤗

[@heatherthompson1973]

I wish I'd have found you guys years ago. I just put up picture moulding and chair rail up my stairs using another one of your videos (the one that shows the math) and I cannot tell you how much it helped me. I'm a forever fan now, you guys are wonderful.

[@homeimprovements]

That is awesome! Thanks for the comment 😊😊😊

[@Souter0777]

The best video online to show you how to do this, clear simple tricks that make the job easy even for a novice like my misses. Great job ladd

[@homeimprovements]

Wow, thanks!

[@paulbateman5769]

I tried to do this a couple of weeks ago at my daughters house. Hit a problem and I've been scratching my head ever since. Finally got to looking on you tube and now armed with a head full of cockney knowledge I'm gonna go and finish it today. Cheers lads 👍

[@homeimprovements]

Legend thanks mate 😊💪🏼

[@paulbateman5769]

@@homeimprovements update. Absolutely looks the dogs mate. Daughter loves it. Wish I could show you a pic. I'm knackered now. Time for a beer 🍺👍. Cheers lads

[@johngratton467]

To help visualise it a tip from junior school arithmetic lessons (in the 60's, I'm now happily retired ;) , we were taught to visualise it as 'Lamppost's and Spaces' 4 lamppost's 3 spaces and so on, I've used it all my life as an electrician to get even space spaces on cable tray, ladder rack trunking and conduit

[@jessmartinez3229]

Wish I would’ve found you guys before I made my wall look like the chalkboard of a crazed mathematician…. Lol My sanity has been restored! Beauty AND Brains! 😉 You guys are definitely the whole package! THANK YOU, all the way from Texas!

[@homeimprovements]

Thanks Jess 😊😊

[@MrViolet10]

Top job lads well explained

[@saffidin7263]

THE BEST video explaining measuring for panelling, I've seen to date - and trust me I've seen a few ! Gained a Sub.

[@homeimprovements]

Thanks 😁😁👍🏼

[@chenninehowitt]

What a great video! Thank you for all your wonderful tips guys x

[@homeimprovements]

Thanks so much! 😊

[@kingy1204]

Cheers lads. Going to attempt mine next week after getting quotes of 600 odd quid. You guys have given me confidence to have a crack myself so thank you 😊

[@homeimprovements]

Best of luck! 😁😁😁

[@novalinkful]

Fantastic!!! Thank You!

[@blakesboxing6926]

One of the clearest instruction videos I have seen 👌👌

[@homeimprovements]

😁🙏🏼

[@davidhouston7533]

Brill and enjoyable can't wait to start my own two londoners I assume, good craic too

[@elaineburkinshaw9566]

Best and easiest way I've seen of doing this can't wait to do mine now

[@homeimprovements]

😁👍🏼

[@lucidcreationscouk]

So good! Great explanation

[@homeimprovements]

Thank you 👍🏻

[@kayleecowper9020]

I loved this video and it even convinced my husband that we CAN panel our hallway/stairs. I was feeling super confident...until it dawned on me that we have a winder staircase and will need some extra help re angles/spacing. Please send help soon lads 🙏

[@kevinwalters4659]

Brilliant guys, well done. Cheers

[@KkkKkk-bc7jf]

You boys are rocking it. Simple effective and pure tradesman professional...keep going you will get the recognition you deserve

[@homeimprovements]

Much appreciated!

[@shayhoulihan4391]

Shay checking in from dublin Ireland thank you ❤❤❤❤

[@ChrisSmith-qk6hd]

Quality vid boys , some good points there most people would not think of when having a go at this 👍🏿👍🏿👍🏿

[@homeimprovements]

Nice one Chris 😊👌🏼👌🏼

[@samfringle916]

Best video yet! the missus is getting ideas now... Cheers guys

[@homeimprovements]

🤣🤣 your welcome Sam 😉

[@petermcdermont3067]

Just a superb video and I’ll definitely attempt the job with some confidence now.

[@homeimprovements]

Thank you, glad you found it helpful 😊

[@jamesonsismyfriend]

Hi thanks for the mini plane tip worked a treat.less than a tenner.😊

[@homeimprovements]

Great to hear!😊😊

[@mrustem3458]

I thank you Gents.

[@colettetremain7649]

thanks Brad & Dave (aka phil) made it sound really easy!

[@homeimprovements]

Dave thanks you for you comment 🤣🤣😁

[@anthonypinnington1547]

Top work explained really well for us budding d.i.y ers

[@homeimprovements]

Thank you 😊

[@ClairesCraftyCorner]

so so helpful thank you !

[@homeimprovements]

Glad it was helpful! 😁😁

[@chenninestravels]

Great video guys! So clear & easy to follow and you've added links to the items you used (just found that lol) Can't wait to get started, thanks x

[@homeimprovements]

Thanks for your positive comment 😊

[@John-cb6wn]

Excellent tutorial

[@homeimprovements]

Thank you! Cheers!

[@BappyLamabazar]

Nice work guys thank you.

[@homeimprovements]

Thanks for watching! 😊

[@billywhizz]

Cheers lads. Really good video & nice simple instructions

[@homeimprovements]

Thanks 😊💪🏼

[@Jenny-mam]

I'm doing to give this a go this year 😊 thanks guys

[@homeimprovements]

No probs good luck 😁👍🏼

[@paul-fk7de]

Brilliant job 👏

[@homeimprovements]

Thanks 😁

[@DOCTORALX]

Excellent video mate. Two questions for you if you have time to respond. 1) Why the first vertical board has some distance from the corner (also many cm should that distance be?) but the vertical board upstairs is right up to the corner? 2) Can I screw the boards to the wall instead of using a nail gun? Many thanks in advance

[@rockyslack799]

Really handy lads,great advice 👌 👍

[@homeimprovements]

Thanks 👍

[@stephensinclair4093]

Thanks lads great vlog great help Cheers

[@homeimprovements]

😊

[@me0u9171]

A masterclass in geometry.

[@denisconor648]

Great stuff

[@kdk621621]

Thank you - great instruction!

[@homeimprovements]

Thanks 😁😁😁

[@briancurd6078]

Great Video thx - what size wood (width & thickness key for me) did you use for rails & uprights for this project/

[@homeimprovements]

Not too sure now was a while back this job 😞

[@gelagarvey8208]

Explained perfectly this video has been the best thank you

[@martymurnin8128]

Thanks for the video. What would you use if you were fixing it to a block wall instead of a stud wall?

[@homeimprovements]

These are brick walls 😊💪🏼

[@johnhenderson5845]

Best video I've seen on this, well done both! Couple of questions, is there an alternative to a nail gun, is it possible to hammer in pins or will this risk damaging the MDF? Also, if there is more than one length needed for going up the stairs, is it ok to butt together and plane each edge, or best to mitre? Thanks!

[@vikeshmistry116]

Thank you this has been so useful!

[@homeimprovements]

You're so welcome!

[@TheRedarmy322]

Make it look super easy cheers lads I’ll be starting mine this weekend 👌🏻

[@homeimprovements]

Welcome 🤗 anytime

[@andrewthompson6747]

Great video, what product would you recommend for filling in the gaps you created with the mini plane ?

[@krispowa]

amazing explanation lads! thanks for the simple instructions :)

[@homeimprovements]

Our pleasure!

[@Cartoonhead74]

Excellent video lads 👍

[@homeimprovements]

Thanks mate appreciate the comment 🙌

[@james78ish]

Excellent thanks chaps great little learner video

[@homeimprovements]

Thanks mate appreciate it 🔥🤙🏽

[@golfrichardvc]

Great vid lads !

[@homeimprovements]

Thanks 👍 😁

[@MandyJaneTaylor]

Hi Would you do the stairs first and then continue along hallway and landing areas? My hallway finishes at front door so it’s the first area you will see. I’m worried about the panels cutting off short at doorway? Can you advise please? Love your videos 😃💕

[@homeimprovements]

I split each area equally not all panels are the same size 😊

[@deanjono22]

Great video lads....how do you deal with a curve at the bottom of a staircase wall? And where can I get that paneling from??

[@homeimprovements]

This is just 9mm mdf we had cut into 100mm strips 😊

[@joecollins5460]

Hi Lads, thanks for the video it's a great help. Can I ask, most of the panelling strips come in a 2.4m length . Stairs would need a longer length. Do you bevel the edge if you butt too lengths together or mitre the joints?

[@myrahouse2368]

Hello Phil, Dave 😂 I’m dry walking afterwards I’m doing this.

[@shaungrieveson4846]

Wanted to do this on our stairs and hallway for some time now but never had the confidence. After watching your video we have decided to give it a go. I have a Question though which is throwing me a little, you took the 1000mm measurement from the bottom first from the top of the skirting board, at the top of the stairs you took the 1000mm measurement from the top of the stringer (do i have that right?) Many thank's

[@homeimprovements]

That’s it 😊

[@seanwhelan3905]

Thanks for the video, really helpful.

[@homeimprovements]

Thanks for watching Sean 😁😁😁

[@kriswale]

What would you advice to if a plug socked is at bottom of stairs (assuming switch for stairlift) would you cut into the panel slightly or move to other side. TIA Great video thank you.

[@ChrisLivingInYork]

Great work lads. Was the wall lined with lining paper and then you glued the panelling directly on top

[@kudamun2013]

Hi. Does it matter if the skirting isn't level with the stringers at the bottom of the stairs? Thanks for the vid 🤘

[@homeimprovements]

No if you chalk it out as we did you’ll just ignore that 😊

[@clemkonan]

Nicely done the presentation strategy is just what I needed

[@homeimprovements]

Thank you for your comment, please let us know if you have any requests for videos 😊

[@abs1807]

What filler should you use to fill inbetween panels? Should you fill the pin holes also? Then caulk the wood ins and outs before painting? Just about to do this in my new house and scared!

[@TessRobertsf]

Great video I have a staircase which is not great. Skirting board at the bottoms and the top. How do I make the bottom panel the same height. Meaning when I reach the top stair, the skirting is going to make the bottom panel higher! Advice on how to match up please.

[@homeimprovements]

If you chalk line the stairs then the bottom and top until the line intersect you can keep the same height on both 😊

[@TheHicky46]

Great video lads. Just one question. How do you work the equal spaces when you have the incline up the stairs and then a straight section at the top and bottom of the stairs?

[@TheHicky46]

Do you just measure the straight parts at the top and bottom hallway and landing and add that to the incline figure?

[@homeimprovements]

Not sure what your asking tbh mate 🤔

[@TheHicky46]

@@homeimprovements I know to get equal measurements from the bottom to the top of the stairs you have to take into account the slope when calculating the width of the actual uprights, so say 10cm becomes 12 etc. So you can just do the calculation to get equal length panels. But what about the straight sections at the top of the stairs (landing) and bottom of stairs hallway, how do you add them into the calculation, so they all end up equal and you end up with an upright at the very end of the landing. Sorry hard to explain, could explain in 2 secs chatting but writing it is a different ball game 😂 thanks anyway👍

[@martynreeve9632]

Hi guys. Love your work! I have a question for you, was this being Brad nailed into a solid brick/plastered wall? I’m a bit worried that the nails won’t go all the way through on our old 80’s house?

[@andypandy3736]

great video a question at the begging of the video have you added some pine timber to the side of the stairs to give extra room for the 9mm mdf

[@homeimprovements]

We sure did good spot also because it was in bad shape 👌🏼👌🏼👌🏼

[@polashaus]

What paint do you use on the pannels.. do you use 'normal' for walls and ceiling or it must be some special one?

[@homeimprovements]

Once primed if using unprimed normally emulsion for us 😊

[@polashaus]

@@homeimprovements thank you :)

[@benwalker8177]

What you bezel the edge with the small plane, you mention filling it, what would you recomend its filled with, decorating chark or wood filler. iv found decorating chalk shrinks back everty few years when i used on on skirting boards, or will the paint stop this happening

[@homeimprovements]

Thanks for your comment. We recommend Ronseal 2 part wood filler 🙌✊🏽

[@fannycraddock99]

You guys make it look so easy. How long did you have to train to be a carpenter/painter/carpet fitter? Do you have your own business? You really need to get yourselves on TV.

[@homeimprovements]

Thanks 😊😊 been doing trade works out whole life’s 😊

[@danahawkeye]

With the top rail, did you have to join two pieces together? If so, did you just butt join them or did you mitre join them? If you didn't, but would have to, what would you do?

[@kyliewoods9323]

Sweet! Wanting to start mine now. Only issue I've got is the stringer isn't even depth all the way up - think the wall was plastered by a drunk bloke.... How can I overcome that? Do I need different thicknesses of wood for the panelling? Also, no pin gun.... Is a hammer and pins like you'd use for skirting and architrave okay?

[@homeimprovements]

Depends on what you want to do there’s a few options and yes adhesive and pins will work 😁👍🏼

[@mickobyobrien2650]

I use a protractor after marking out to find the acute/obtuse angles.

[@rich8994]

Nice vid lads. Nicely broken down DAVE😂

[@homeimprovements]

🤣👌🏼👌🏼

[@neebak56]

I was going to give up on the idea of panelling until I watched this amazingly simple video, so thank you so much guys. I have a question. I'm keeping the original dado rail and skirting, so will be using 6mm mdf for panels. However when you get to bottom of stairs, where it straightens out, the ledge on the skirting board is much wider than the ledge going up the stairs. Old Victorian house and nothing is straight. What should I do with panels when I get to the bottom of stairs?

[@homeimprovements]

Not too sure what you explaining there sorry 🙈🙈

[@neebak56]

@@homeimprovements One of my panels will be placed horizontal.... above the skirting board. However at the bottom of the stairs, my skirting board has pulled away from the wall, creating a sort of ledge. Was just wondering how I would deal with this issue. Hope this makes sense....😅. If not, don't worry and thanks for replying.

[@TessRobertsf]

Similiar thing I have a problem with. Skirting at the bottom this is fine. First bottom panel runs up the stairs. Now a small landinding with a skirting, hence the bottom panel will be higher and will not match or butt up help!

[@sophiasophia6049]

Great video. Can you update the links for tools please some are broken. Thanks

[@noelthomas813]

What did you use for filling joints and gaps on walls?

[@homeimprovements]

Easy fill for walls and two part wood filler on panels

[@timbo9799]

Great video guys, super helpful with tips & tricks. Regarding the spacing, is it the same calculation if you have a longer hallway to continue the panels (rather than ending quite close to the bottom of the staircase like in the video)

[@homeimprovements]

Thanks mate and it’s all down to personal preference that’s why it’s always best to chalk it out 😁

[@christierobinson6270]

Great vid, kind of got distracted by you both though 😍😍🤭

[@homeimprovements]

😂😂🤗🤙🏼

[@jacspratt1786]

Can you do a video for panelling in a bedroom please?

[@shaniceamore313]

How would you do the first panel if theres a radiator pipe and window sill in the way x

[@paulsweeney5642]

Good advice

[@homeimprovements]

😊🙏🏼

[@kirstieeagle8016]

Great video! I have a quick question so my top stringer is still at an angle and not in line with my top skirting board so not sure the measurement will be the same between my top and bottom stringer. Any advice? Hope this makes sense! Thanks

[@homeimprovements]

Not too sure what your trying to explain 🙈🙈🙈🙈

[@stephenpiercy7915]

Love the video im goina give it a go. Yous make it look so easy. What size nails do you yous use. Thanks

[@homeimprovements]

Thanks depends on wall and what tools you have 😁

[@stephenpiercy7915]

@@homeimprovements Ryobi 16g nailer on a solid wall

[@valenziad7159]

Thank you

[@homeimprovements]

🤗

[@SArahM013]

Amazing. I’m so glad I found your video. Hope this isn’t a dumb q but what could you use instead of a chalk line or how do I make one? 😂

[@homeimprovements]

Thanks 😁 best bet is to buy one very cheap these days 😊

[@SArahM013]

@@homeimprovements thanks so much. I never knew this existed 😅

[@ozosbourn]

Thankyou geezers

[@homeimprovements]

Thanks 😊 bro

[@jayc1140]

Always wondered what Beats and Grindah been doing since PJDN finished

[@ShaunI590]

How do i continue it from my stairs to hallway as the skirts are a lower level to the stringer so wont it look odd if i was to continue it?

[@charlottemay8116]

I want to panel my hallway, landing, and stairs. Where would you start first?

[@homeimprovements]

Doesn’t matter imo every wall is a section on its own 😊

[@markrutter29]

Top video, im gonna have a go, Can I ask where you get the chalk string lads

[@homeimprovements]

We got this from Amazon I have the link somewhere if you want it . 🙌🙌

[@Briggers69]

Very well put together video lads. Just a question where did you get your MDF strips from ?

[@homeimprovements]

Full panels we had cut down in b&q or a local timber merchant 😁

[@Briggers69]

@@homeimprovements Cheers boyz

[@AdamLunn08]

What did you do at the bottom after the riser terminates at the skirting board? Did you remove the skirting board and put a full panel that comes up 100mm after the skirting is put back on top? Hope that makes sense. I have Ogee skirting and the top is thinner than the panel so I can't start the panel on top of the skirting.

[@homeimprovements]

This finished at the stairs but yes you can remove skirts install panel 100 taller than skirting then reinstall skirting 😊

[@charlottedugdale8884]

Fingers crossed you see this!! I’m struggling getting started on my stairs panelling - I don’t think it’s possible to join the stairs to the hallway. HEEEELLLLPPP MEEE

[@mukzahmed9856]

so quick question, i see all these panelling vids on these narrow staircases but never the final product. Where does the hand rail go? Surely if you placed it above those panels it would sit too high?

[@tonygordon1593]

How would you shape the cut for a stringer that has a curve at the top of the stairs

[@homeimprovements]

You can Kurf the trim but will need a lot of filling and sanding 🤔 personally smaller curves I run straight 😊

[@stephan20008]

What tools are needed? Chaulk line, handsaw, pencil,level