How to install Womet-Tech Frame Sliders on a 2020 Yamaha MT-03 by TST Industries

Whether your riding on the street or dragging knee at the track, ensure your 2020 Yamaha MT-03 is protected with the precision engineered Womet-Tech Frame Slider Kit.
Get these Sliders here: bit.ly/32FGroB
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
Protect your 2020 Yamaha MT-03 by moving the point of impact and abrasion away from your fairings and expensive controls with the Womet-Tech Frame Slider kit. Repair costs associated with a simple low-side can add up quickly, so help minimize the chance of severe damage with a consumable delrin slider puck that mounts directly to the frame through our precision engineered CNC machined spacers. At TST, we firmly believe that the only effective method of installation for frame sliders is mounting them directly to the frame. We have seen far too many examples of no-cut frame sliders cause more damage than protection due to their bracketed mounting method that avoids cutting the fairings. This is why we only engineer and offer the most effective frame slider kit possible for your Yamaha MT-03.

[@anderson6074]

Another call for these to be in stock. My MT-03 is currently having repairs for damage to the shifter and side of the tank plastics, etc after it got laid on the left side due to a fender-bender (rear-ended while sitting at a red light). Sure would have been nice to have this set installed.

[@TSTindustries]

We have had trouble sourcing the bolts after our typical supply channel came up short. We found a new supplier and the bolts are on their way. We will have these back in stock for you as soon as we can after the bolts get here.

[@Voltomess]

I bought frame sliders and a fender eliminator with plate light for my new mt-03 package will be delivered today!!

[@ZVManning]

You guys def have the best install videos. Doing my integrated r3 tail and flush / tail tidy this weekend. Now I just need you to make a carbon fiber tire hugger for the 2020 r3 and I be set

[@TSTindustries]

Good luck and let us know how it went afterwards.

[@ZVManning]

@@TSTindustries went good minus dropping one of your wire taps into my battery case, but got it out. Also I suggest including the reflecting plate mounting hardware in the eliminator kits and just raise the price cause I can't afford to get pulled over for that lol. Easy installation though love how it looks

[@adamdorfler1769]

Hope they are back in stock soon so I can get the full protection pack.

[@TSTindustries]

We have had trouble sourcing the bolts after our typical supply channel came up short. We found a new supplier and the bolts are on their way. We will have these back in stock for you as soon as we can after the bolts get here.

[@mtmatt8958]

These sliders are back in stock man I just ordered mine yesterday

[@martinm4725]

Haha, I came for the sliders, ended up searching the ratchet too :P thx for sharing

[@rolandofunes6492]

Amazing job !!! I can’t wait to go to USA to get all those things

[@TSTindustries]

Come and stop by when you do.

[@carloschaznunez6316]

We just recieved our new Tail lights Programer ⭐⭐⭐There awesome Thanx guys.

[@TSTindustries]

Our pleasure!

[@Marcos_andradehotmailcomAndrad]

Onde acho desse protetor de tanque?

[@carloschaznunez6316]

😁When are they gonna be on stock we need ASAP 😎🤙

[@TSTindustries]

We have had trouble sourcing the bolts after our typical supply channel came up short. We found a new supplier and the bolts are on their way. We will have these back in stock for you as soon as we can after the bolts get here.

[@carloschaznunez6316]

Sounds great Thanx for the Intel guys. 👍

[@iselcuksaritas]

These sliders are looking soo good and durable than the cheap plastic ones. They looks easy to torque to specs because its metal, plastic ones are cracking under a bit of stress. I wanna ask you guys something; are those engine fixing bolts M10 bolts?

[@TSTindustries]

Yes they are...but I wonder why you would want to know that

[@augustinemichael7697]

Please consider designing a pillion grab bar for R3 or MT-03

[@TSTindustries]

Sorry buddy. That is not likely to happen. We typically lean the other way and remove any means of carrying a passenger.

[@ryanchisholm1347]

Do the parts for the 2020 model fit in the 2022 model?

[@82DStock]

Question on these: The provided instructions call for 40Nm torque, any reason your video says 50Nm? Is it different for R3/MT03 for some reason, since instructions were for the R3?

[@TSTindustries]

Please use the 50Nm value as per our video. I will have to check what Womet-Tech prints on their instructions but 40Nm is a bit low for this connection even if they use 8.8 steel bolts.

[@mtmatt8958]

Just ordered mine with red caps! Please ship before all these other people blow up the system with their orders 😅😂

[@TSTindustries]

Hahahaha...we have several hundred but they are going fast.

[@DailYxDosE]

how are they? i heard reviews they look orange and they kinda orange in this video.

[@mtmatt8958]

@@DailYxDosE light red I'd say, definitely not orange

[@aircooleddaily]

do the MT03 need a radiator guard?

[@dotted6789]

Theres no shipment to Brunei . So sad! :(

[@otterboy8413]

Nice 👍, But can you tell me how to buy gripster tank please 🙏

[@TSTindustries]

You got our website and navigate to the product page for your bike model and year. You will find Tech spec on there

[@Randomvideos502]

Any videos on how to install a TOCE full exhaust system on a 2020 Yamaha mt03?

[@TSTindustries]

Not yet but that may happen in the future.

[@TSTindustries]

You can watch the video we made on the R3. Same parts, same steps, just less components to disassemble in the process. On tje MT it may be necessary to trim the belly shroud to make room for header

[@mtmatt8958]

These are back in stock now I believe!

[@TSTindustries]

Yep, they are

[@mtmatt8958]

@@TSTindustries wow! I received my sliders in 2 days all the way up in Ohio! Idk how you guys did it so fast, but thanks!

[@TSTindustries]

@@mtmatt8958 we hired Santa's reindeer to make pir deliveries

[@mtmatt8958]

@@TSTindustries LOL thats believable. Love the look of the sliders I also got the levers from you guys for my MTO 3 I couldn't be more pleased!

[@TSTindustries]

@@mtmatt8958 thats great...hope they serve ypu well

[@tenzinnorbu3857]

Nice..going to buy this bike really soon.. buts seems the combo protection is out of stock 😭 and do u deliver to australia once its back ????

[@TSTindustries]

We have had trouble getting the bolts for the frame sliders from our typical supplier. We have since found a new supplier and the bolts are on their way. As soon as the bolts arrive we will be able to complete the frame slider assemblies and have those available for you guys along with the total protection packs.

[@BlackstoneJ]

I got a pair of shogun no cut sliders , is the torque spec the same ? I can't find any answers

[@TSTindustries]

Unfortunately we cannot confirm as that is another brand and we're not familiar with their products.

[@mtmatt8958]

Does it matter that I installed these while the bike was on its kickstand instead of a lift? Also I didn't use a real torque wrench just a normal ratchet pretty tightly

[@najatmaada]

I have the same question

[@SamuelSeebacher]

Do they fit whit the mt 03 2018

[@franfernandez2694]

Holaaa buenos días como podría contactar con vosotros para poder con seguir el kit anticaida

[@franfernandez2694]

Holaaa buenos días me gustaría contactar con vosotros para poder conseguir el kit de caída

[@petergeanacopulos5327]

Will I need a breaker bar to remove that original bolt? Loctite?

[@TSTindustries]

Please watch the video. All the instructions are contained within.

[@joeyp4196]

Do u really need a torque wrench?

[@TSTindustries]

We like going by the book and recommend the same for anyone else working on bikes

[@joeyp4196]

@@TSTindustries whats the worst that could happen if i don't.

[@TSTindustries]

@@joeyp4196 I would say the worst symptom I can think off is you overtighten the connection and either break the bolt in the head or strip the threads in the boss in the head. Or perhaps you under tighten and then you lose the front mounting bolts leaving the motor mounted through incomplete locations leaving to engine case strain. All that to say I have tightened these locations without torque wrench in the past with no adversity. But nowadays I have nice tools at my disposal and doing these things by the book steer me around possible problems.

[@joeyp4196]

@@TSTindustries Thanks brother. I better buy a torque wrench now.

[@FiR3Dr4g0n]

hello, i am from greece and i would like to buy the WOMET-TECH TOTAL CRASH PROTECTION PACK FOR YAMAHA R3 2015-2018 / MT-03 2020+ but no luck.. it's still out of stock. any ideas when will it be available? thanks in advance

[@TSTindustries]

Womet-Tech is in Poland. You can probably just get all the components straight from them and save on shipping. We make the parts into packages ourselves but you can go to their website and drop the individual sets that make up the pack into your cart. Pretty simple.

[@FiR3Dr4g0n]

@@TSTindustries thank you so much for the immediate answer. but in their website it doesn't make clear if those items are compatible with my mt 03 2020. it just says MT-03 (2006+)

[@TSTindustries]

The limiting part right now is the frame slider kit. That is what is out of stock here, and makes the Total Protection Pack out of stock. We have 100 sets coming next week so they will be available shortly after. I know that Womet has not updated their MT03 listings. If you go to their site you can get all these parts from the 2015-2018 R3 category. Those are the parts that fit the 2020+ MT03 bike.

[@FiR3Dr4g0n]

@@TSTindustries am willing to wait for you guys, since i want to buy not only *frame sliders* but also *fork axle sliders* and *swingarm spools.* what is the correct fork axle sliders for example, the one for R3 [YZF R3 3RH (2015+)] or the one for mt 03 [MT-03 3RH (2016+)].. i don't really get it. thanks a lot

[@SGK23TV]

Ninja 400 2020. Parts needed ASAP. TST.

[@TSTindustries]

We have a full parts suite for that bike on our website.

[@shibaryudayo]

Is it possible to ship to Japan?

[@TSTindustries]

Yes but it is not cheap. See if Kentaro has them in stock at www.axxl.jp/ . He is one of our dealers there.

[@SpencerHogg]

Sooo nice

[@TSTindustries]

Thanks 😊

[@Timmt09]

Look great..do you import to the Uk

[@TSTindustries]

If you are in the UK you can get them directly from Womet-Tech in Poland

[@paulcapuyanballola]

Please include The Philippines in your shipping list of countries. Please.

[@TSTindustries]

I put in a request for this to happen. I should know by the end of next week. The purchases will require a payment type that is guaranteed not to be fraudulent and shipping via DHL. So that means that PayPal will be the choice of payment we will accept, and the shipping will be a bit pricey, but we will make it happen.

[@paulcapuyanballola]

@@TSTindustries Wow thank you so much! I'm sure people from my country will pour in all the support for your products. Great choice of your logistics partner too. They have been very reliable here in our country. Thank you!

[@garethdv]

@@TSTindustries Yeah. Hoping for the best though.

[@garethdv]

@@paulcapuyanballola Brad, mag dasal ka matupad to. hahahaha

[@ridechanel2920]

Pano ma idelever to sa bahay? Lugar lng naka sulat philippines..

[@jonnievic4571]

Hey guys i need theze where And where can i order them Please

[@TSTindustries]

The link can be found in the description.

[@nakssb]

Do you also ship to switzerland?

[@TSTindustries]

We do.

[@nakssb]

@@TSTindustries thanks! I just ordered the crash protection pack 👍🏾 Thank You for those clips to the MT-03! Its my first bike and your videos help a lot. 👌🏾 Can’t wait for my first ride.😄 Greetings from Switzerland🇨🇭

[@TSTindustries]

@@nakssb nice! Let us know how everything turns out once you install the parts.

[@krjknna9871]

Fantastic yamahaaa MT03 hiwayrider only king of the YAMAHA ktm beat the Yamaha i like super bro go back ktm duke not like best only king of the YAMAHA

[@TSTindustries]

I don't know exactly what you are saying but you sound enthused so I will throw a thumbs up atcha.