TST INDUSTRIES VELOCITY STACKS FOR Z400 NINJA 400 INSTALLATION by BLR TUNING

#z400 #ninja400 #BLRTUNING #TSTINDUSTRIES
IN THIS VIDEO I GO OVER THE INSTALLATION PROCESS OF THE TST INDUSTRIES VELOCITY STACKS THAT FIT THE Z400, NINJA 400, EX400, ER400, 2018 - 2021
YOU CAN PURCHASE THESE HERE AT THE FOLLOWING LINK.
tstindustries....
YOU CAN SEE HOW TO TEAR DOWN THE BIKE COMPLETELY IN THIS VIDEO THAT I DID FOR THE K&N HIGH FLOW AIR FILTER INSTALLATION.
• KAWASAKI Z400 K&N HIGH...
HERE'S A LINK TO MY TWO-STEP LAUNCH CONTROL INSTALLATION VIDEO.
• 2-STEP LAUNCH CONTROL ...
IF YOU'D LIKE TO PURCHASE THE TWO-STEP LAUNCH CONTROL FROM US HERE AT BLR TUNING, ITS $35 SHIPPED ANYWHERE IN THE US. YOU CAN REACH OUT TO US THROUGH THE FOLLOWING LINKS.
BLR TUNING Facebook page
/ blrtuning
on Facebook,
Bill Ramseyer Jr
/ biggdaddy007br
on Instagram @BIGGDADDY007BR / biggdaddy007br
on twitter, @billramseyerjr
/ billramseyerjr
HERE'S A LINK TO MY POWER COMMANDER 5 (PCV) INSTALLATION VIDEO.
• 2021 KAWASAKI Z400 POW...
YOU CAN PURCHASE THE POWER COMMANDER 5 FOR THE Z400 2019 TO 2021 HERE.
www.dynojet.co...
YOU CAN CHECK OUT MY COMPLETE KAWASAKI Z400 PLAYLIST ON MY CHANNEL HERE AT THE FOLLOWING LINK.
• KAWASAKI Z400 ER400 KZ400
You can reach out to me or follow me through any one of the following links. I am on all social media platforms.
BLR TUNING Facebook PAGE
/ blrtuning
ME ON FACEBOOK
Bill Ramseyer Jr
/ biggdaddy007br
Twitter
@billramseyerjr
/ billramseyerjr
Instagram
@BIGGDADDY007BR
/ biggdaddy007br
snapchat
@BIGGDADDY007BR
KZbin
BILLRAMSEYERJR
m.kzbin.info...
Xbox-1
HONDA250XATV
IF YOU LIKE MY KZbin CONTENT THEN PLEASE CONSIDER HITTING THE LIKE BUTTON AND SUBSCRIBING TO THE CHANNEL IT HELPS ME OUT TREMENDOUSLY.
THANK YOU FOR WATCHING

[@jeffsneed4301]

I have the dinojet with the volsty stacks TST

[@jewolf5801]

Hello, great video, I have a 2023 N400. I wanted to ask, I see that velocity stacks by some of the other brands are both the same length, unlike the stock ones and TST which are one short and one long. Is there a difference, and which would be better, having them different lengths or the same length? Thanks

[@BLRTUNING]

Having one short and one long will help keep some of the low end torque. Having them both longer would produce more mid-range and top end power.

[@jewolf5801]

@@BLRTUNING Got it, thanks so much!

[@codymaxwell1317]

Do you have to tune the bike after install of these and the air filter?

[@BLRTUNING]

Yes.. the only part that you can get away with without tuning is a simple slip-on exhaust when you delete the cat or add headers or high-flow filter or modify the air box or add the snorkels yes I don't recommend doing it without having the bike tuned properly. You can tune the bike properly with the Power Commander 5 or Power Commander 6 which is the brand new replacement for Power Commander 5. We do have those available on our website if you don't see them on their website give me a couple days we got to update everything on the website. Essentially you could order a power commander 6 with a custom tune already installed. We ship anywhere in the US except California for tuning devices... www.blrtuning.co You can always message us directly by going to our website and then hit the chat button down in the bottom right hand corner...

[@codymaxwell1317]

@@BLRTUNING Oh ok. Well I have a 2020 Yamaha R3 that I had planned to do these two mods to but idk of anyone around my area to tune the bike afterwards. That’s why I went with a slip on instead of a full exhaust system. I’ve read the power commander messes up bikes like mine but idk

[@limbi8888]

The stock seems to have a similar velocity stack, would it not be just as good?

[@BLRTUNING]

These ones that are a harder material and do not move around and flex and collapse as much allow for a much smoother air flow and the same air flow every single time. So these would definitely be an upgrade to get rid of the rubber ones that are in the air box.

[@jeffsneed4301]

Can’t get my engine light to go off

[@2wheels_itchy]

Do you know if the 400 velocity stack fits on ta 2020 ninja 650. Or do you have a company to recommend

[@BLRTUNING]

The only thing I can think of is to check TST industries and see if they carry them I don't know anyone else that does for that specific bike and I could not tell you if the ones for the 400 would fit or not.

[@2wheels_itchy]

@@BLRTUNING thank you very much. I’ll check that out

[@jeffsneed4301]

Do I delete the oxygen sensor I have a m4 full exhaust

[@BLRTUNING]

If you're going to start unplugging different sensors it has to be either an ECU flash to eliminate those sensors in the ECU settings itself or you have to have some type of dummy plug plugged in but tricks the system into thinking that there is still a plug there. It's either that or you leave things plugged in.

[@iDrewMelon]

do these work on a 2023 ninja 400?

[@BLRTUNING]

Yes they would be the same

[@jeffsneed4301]

I got a power comader 6

[@BLRTUNING]

You have left a few comments on my KZbin channel if you'd like to get in touch with us the quickest way to do so is to send us an email. [e-mail]

[@ivanlorenzo4834]

What does this help with what is the purpose please explain?

[@BLRTUNING]

I do explain a little bit in the video but having the velocity stacks in there helps with air turbulence inside of the airbox and helps direct the airflow more directly into the throttle body.... This is a noticeable horsepower gain.... The thing to remember here is anytime you are messing with the airbox you should also consider custom tuning work that's what would make it benefit tremendously. This bike has a modified air box a high-flow filter and the velocity stacks it's a huge difference in power. It also has a power commander 5 with wideband that allows for full tuning in the ecu. This means we can adjust the fuel mapping to accommodate the new air coming in... We will also added titanium headers and a full exhaust system as well Despite makes over 80 horsepower and stock they make about 42.5 So this thing is extremely snappy on the throttle and has a lot of torque...

[@twowheeladventures327]

@@BLRTUNING so with the stacks, filter and power commander 5 you’re able to squeeze 80 horse out the 400?

[@BLRTUNING]

@@twowheeladventures327 it also has a full titanium and carbon acropovic exhaust.. it makes something close to that amount of horsepower. It's a pretty ridiculous amount of torque for the bike that it is.

[@BLRTUNING]

@@twowheeladventures327 we do offer tuning work for these bikes as well... If tuning work is what you're interested in you can email me. [e-mail] we also have a website available where we carry parts for these bikes as well... www.blrtuning.co

[@twowheeladventures327]

@@BLRTUNING Thanks bill, I actaully just opted to get a GSXR750. However I'll let other people know of your services as many 400 owners reach out to me.

[@mattmccauley5561]

What's that watch you have?

[@BLRTUNING]

Invicta

[@nathanmuscaro973]

Their website shows the longer stack opposite of yours. Wonder why

[@BLRTUNING]

Yes I have seen mixed reviews and whatnot on which one should go where. Don't know that it would make a difference at all which one goes where. The whole idea behind them being different sizes is to help create turbulence in the airbox which helps create better airflow. So I don't know that it matters too much which side you put the longer stack on..