How to Install Your PIAA Si-Tech Wiper | CarGuide.PH

Just bought your PIAA Si-Tech silicone wiper? Here's a step-by-step process on how to install it.
More info on them here:
www.carguide.p...

[@avgrim7729]

How do you take that blocky piece off? It just shows it removed suddenly without explaining how.

[@steamstarter6608]

This is a very incomplete tutorial I've read thus far and since these dont come with instructions, I was a second away from returning them back for a refund. Now that I spent 20min figuring it out without breaking small plastic pieces, here is what I did, this is for my 2014 Audi S4: 1. I removed my OEM wiper blades, looked thru the hardware pieces PiAA supplied and saw that I needed the "B" and "M" pieces. 2. To remove the Bulky piece with the inner insert from the new wiper, when you look at the inner piece which moves, grab its lower lever, squeeze it up, then while up, using a some force just rip/lift it up, hard, it will snap off. Next is the 2nd bulky piece, same idea glab the bottom of it and pull up hard, like you are trying to rip it off, it will snap off. 3. I took the "M" piece, make sure the arrow points to the pass side of car, you have to slide it into the rail with the front of it on a slight angle down, it goes under the front rail guards, push the back down, it will snap. 4. Take the "B" top part and just snap it down over "M" part, the side center holes will line up when you snap to lock them together. 5. That's it, now you can slide the new wiper into your car wiper arm.

[@cdreyes81]

Doesn't really show how to disconnect the adapter

[@Burps___]

WE ARE HERE TO FIND OUT HOW TO REMOVE THE J-HOOK CONNECTOR> YOU DIDNT SHOW IT

[@wshuk1675]

True..stupid video

[@badfish711]

Appreciate the video. Saved me some frustration and bloody knuckles!

[@cas7059]

How do I remove the jhook connector?

[@carguideph]

Cortney Sweitzer you pull the tab upward. There’s a proper direction for you to do it.

[@cas7059]

@@carguideph I spent 10 minutes trying to pull that tab up and it wouldn't budge

[@carguideph]

Cortney Sweitzer you have to pull up something and then pull towards a certain direction. Will try to find a graphic for you to follow.

[@rickjohnson9362]

I agree, video is absolutely useless !

[@cubic-c]

lol. what a useless tutorial. just static pictures. doesnt even show how to take off the parts