How to Jump Pressure Switch on Furnace

How to jump or bypass pressure switch on a furnace. If a pressure switch is not jumpered correctly, the furnace will not turn on at all. This would ONLY be done for testing purposes. Do not leave safety switches bypassed. In this video I explain the wrong and right way of bypassing a pressure switch on a furnace.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
➡️ Video References:
10 Pressure Switch Problems:
• Furnace Pressure Switc...
3 Ways To Test a Pressure Switch:
• How to Test Pressure S...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
For More Repair Videos:
🔌 Dryer Repair Playlist:
• Dryer Playlist
🧺 Washer Repair Playlist:
• Washer Playlist
🔥 Furnace Repair Playlist:
• Furnace Playlist
❄️ AC Repair Playlist:
• Air Conditioner Playlist
💧 Water Heater Playlist:
• Water Heater Playlist
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🛒 For a Complete List of Tools and Parts Visit my Amazon Page:
amzn.to/2Q3QTOA
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🅿️ Want to Support This Channel? You can donate via PayPal:
www.paypal.com/cgi-bin/webscr...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🙋🏻‍♂️ Word of Advice TV Social Media:
Facebook ► / wordofadvicetv
Instagram ► / wordofadvicetv
Twitter ► / wordofadvicetv
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📷 Interested in What Gear I use to Film my Videos?
Sony A6300 16-50mm: amzn.to/2OmLSPF
Sony 35mm Fixed Lense: amzn.to/2LPAU3A
Extra Batteries: amzn.to/3c8QBj1
Memory Card (2): amzn.to/34rcwQ1
60" Tripod: amzn.to/2mLXrU0
Bird-Eye View Tripod: amzn.to/3b3RWYy
Rode VideoMicro Microphone: amzn.to/2Ol9KDp
Rode Wireless Go Microphone: amzn.to/3ed5Wkv
Neewer Halo Light (2): amzn.to/2LTANUK
Viltrox LED Light Panel: amzn.to/39ZbSu4
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🙏 We would greatly appreciate it if you considered supporting our channel while shopping on Amazon by buying anything you need on Amazon after clicking on one of the links above. This gives us a small commission at no additional cost to you and helps us continue producing more videos! Thanks a million for your support!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
⚠️ Disclaimer:
This video is for educational purposes. All appliance and HVAC repair work should be done by a trained professional. Word of Advice TV is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📥 SPONSORS / Collabs:
Would you like to partner with Word of Advice TV? 🤝
Email: [e-mail] ✍️

[@WordofAdviceTV]

⭐ Other videos you may find helpful: Top 5 Furnace Problems: kzbin.info/www/bejne/imWsiKeBrpJgjM0 How to Test Pressure Switch: kzbin.info/www/bejne/g4jRZmiYbamLhZI 10 Pressure Switch Problems & Fixes: kzbin.info/www/bejne/kJLbYWWfqb57obc

[@Honestandtruth]

Thank you for that info my friend

[@damiandytlow4698]

I’ll change the pressure switch how do you change the igniter and it runs for few minutes then it shut down then it starts again

[@ShaneHolly]

so when furnace works again by jumping wires and removing pressure switch out of the equation is it then safe to say, u need a new pressure awitch?

[@GenkiBlast]

This may be an old video however I wish to thank you for making these for all to watch. I was having trouble figuring out why my furnace albeit old was having so much trouble kicking over. I followed several videos and did everything with intent with the tools I have. I managed to find I needed to replace my old pressure sensor of 16+ years. I have heat once again because of you.

[@pmc3d431]

Can't thank you enough for posting these videos. Clear, straight to the point, and extremely helpful -- thank you!

[@joelmorgan1871]

I've been in hvac for almost 22 years but the last 19yrs have done industrial refrigeration installs and repairs only. The company I worked for specialized in industrial chillers, ice rinks, cooling towers, large refrigerated air dryers and large commercial applications. Recently I started working for myself and the bulk of my work is residential furnace and central air. I was pretty rusty with the furnaces, forgot quite a few things, and learned how much the building codes changed in my area since I last did residential hvac work. Your videos helped me refresh and brush up, and even learned a few tricks I've never seen or encountered before. Keep up the great work.

[@PartyKing932]

This video has saved me! Just did this to my furnace as a temporary fix until stores are open again and it works amazingly!!! 10/10 would recommend this video to anyone!

[@ZoneDoctor]

Thanks Jay, I used your technique to make sure the pressure switch was actually the problem last winter (2021). To be technically correct, however, the little micro- or limit-switch is actually normally closed but is held open by the diaphragm until suction is applied by the inducer motor. At least for the Trane furnaces in my home. Most of my furnace issues have been due to a pressure switch problem - the switch actually failing due to the tiny amount of current causing the contacts within the switch to become dirty over time. I love the metal pressure switch housing because the pressure switch can be fixed by replacing the micro- or limit-switch instead of by replacing the whole unit. This happened this year (2022) with the other furnace in our house. Each pressure switch is over $60, replaced the switch for less than $3 - and the house is nice and warm now.

[@jeffharrison1090]

You're good, man! You're explanation are structured, clear and concise. You would be a GOOD teacher! You don't drift to the left or right but stay right on target!

[@reynaldojimenez1562]

You’re the best because you know a lot about your field and have a unique way to explain so people understand and learn. Most important you share it, most of the people are selfish and they don’t share what they know. Thanks for all your videos.

[@dominicm2175]

Been going through your videos and noticed this one has quite a few views.... as a handyman who is always working on heating systems, any type of video showing a “ bypass” solution, I think will always do well as they are incredibly helpful to isolate and rule out things as well as get you up and running in a pinch 👍

[@MarkAlbert]

I have been recently asked to investigate why a furnace is not turning on. After doing some research, I thought the cause might be a defective or stuck pressure switch. You explained everything so well and clearly that I can now go back and easily determine whether the pressure switch is the issue or not.

[@matthewpham2665]

I thought I knew how the sequence of operations for furnace works, but I learned something new today. I learned a lot from all your videos, much better than in class instructions I took before.

[@tarbashtheegyptianmagician1490]

Just wanted to say Thank You. At -27 C with -37 C with windchill and furnace giving out, waking up with 16 C in the house in the morning is not fun. Of course this happens on Saturday morning, when most shops are closed. With your help I was able to determine that pressure switch was the culprit and was able to restore heating to the house throughout the weekend while the switch was ordered. Thank You Sir.

[@jimkeefover245]

All of these videos are very informative, very easy to understand, plain and simple. When ever I have a problem such as this I always go here. Most other videos they talk about everything except what the video is about, I am trying to fix my problem I am not interested in what kind of life they have and you really don't learn anything. Keep up what you are doing. You are great

[@WordofAdviceTV]

That is nice to hear, thank you! Glad to know the videos have been helping and that the format is good. I will try to continue doing future videos in a similar fashion 👍👍

[@tslade7091]

Most techs have huge ego’s haha

[@mkbman45]

You saved me alot of money! I bypassed it, furnace worked fine. I blew the pressure switch out and hooked it back up. Success! I ordered a new switch just to be sure. Thanks again.

[@ashishgupte3875]

Another brilliant video !! What I like most is the clear concise narration and bright sharp video. I am no longer afraid of that bogeyman in the furnace closet. What brought me to your videos is noisy inducer motor around Christmas. Within couple of weeks the furnace stopped functioning. Now the inducer motor keeps running without any noise but furnace does not start. I have a new inducer motor ordered from Amazon but it's been 3 days that's not shipped so basically we are freezing it out ! Anyway, on the topic of pressure switch, I wanted to check if everything else is functioning so I pulled out the hose and touched the port on inducer motor and did not feel the suction. So I sucked on the hose ( off course with some filter on my mouth) and heard pressure switch click. Then I quickly clamped the hose and voila ! the burner turned on and flames started. Word of caution !!!! since the inducer motor was not sucking in air through the heat exchanger, the flames just flickered around the burners. So I let go the hose pinch and furnace stopped functioning but the inducer motor kept running. Thanks for letting me share my experience. Thank you, Jay. You are awesome !! and thanks to Word of Advice TV for amazing production !

[@zachbaxter9506]

Thank You, Thank You, Thank You!!!!! My furnace went out on thanksgiving and I had Airbnb guest. To add to it, we where going to get down to 25 deg F tonight! I use this trick to get it working. Then I cleared out the line and cleaned the fan. Works great now! You are the best! keep making amazing videos like this!

[@bowenschannel9469]

What was the issue then? Is it just a bad pressure switch?

[@qianye4087]

Hi, Zach. Did your fan work in the beginning? Or the fan worked but not good enough to generate draft to trigger the pressure switch? Thanks!

[@ricmartinez2590]

Excellent! My blinking LED is indicating the pressure switch. But I wanted to test it to make sure it was bad before ordering a new one. I saw your other video "3 Ways to Check a Pressure Switch" and I have a multimeter. I was going to do that today until I saw this video. This diagnostic it much simpler! Thank you! Thank you! Thank you!

[@Vlican]

you are an excellent teacher, great video as always!! i'm learning so much about residential furnaces by watching your videos!!

[@khoale1537]

Your voice is clear and your explanation is very easy to understand, Jay. I love to watch your videos. Thank you so much!

[@pkiser99]

We've had a problem with our furnance for a couple of years. It intermittently will short cycle and I've cleaned the flame sensor and replaced it, and futzed with it until it eventually starts working ...without really solving the problem. I've had two different technicians from different heating companies come out and look at it with no resolution. I think they were looking for the BIG sale, not a repair. It has been extremely frustrating. Your videos have allowed me to check those things that the technicians should have checked in an effort to dianose the problems. It appears that the issue is down to the pressure switch (thanks to my 17 y.o. son checking the voltage across the two leads of the switch.) and now I can focus on that. I will be replacing the flame sensor (again) and the igniter as an update to the 25 year old furnance, and checking to make sure the flue is not obstructed. THANK YOU for explaining the basics so that I can finally solve my furnace problem.

[@mesureshg]

thank you so much for all of your videos. I watched them all 😄 You gave me the confidence to replace the inducer motor myself and I’m so happy I could do it myself!

[@LonWiddicombe]

I just did this test and it worked perfectly. I now know my furnace low pressure switch is bad. Thanks so much!

[@jonathansnyder8686]

This. This is the one. Trying to get some heat into the house while a part comes. Couldn’t jump until I did it the right way. Thank you!

[@greggcavagnaro5579]

Great lessons, gonna come in handy with my used furnace installation, keeping my fingers crossed!!

[@omikewhite8978]

Word of Advice is the goat!. Very straight forward and very informative!.

[@Alienspecies635]

I just did this last week for a customer! Pressure switch went bad. Another great video!

[@WordofAdviceTV]

You've confirmed that this is practical! :) Thanks for watching and commenting!

[@jimswenson6131]

Love your videos, just subscribed. I wanted to share that my Amana SSE-80 system was turning off after about 45 seconds and faulted with a switch-stuck-open condition (3 flashes). I checked the tube between the switch and the inducer motor assembly and it was clear and the wires to the switch were fine. The furnace is 20 years old so I ordered the correctly rated pressure switch replacement as a first step--that did not solve the problem! For the record, I also verified that the limit switch was working properly. I looked outside to inspect the roof vent at the chimney coming from the furnace and I couldn't see anything obstructing it. I decided to look at the furnace side of that vent and did not see anything at first, but then I noticed what looked like fiberglass insulation inside the inducer motor assembly--and part of that had frayed. The damaged pieces of gasket/insulation that broke off ended up blocking the tic-tac-box-sized opening to the chimney from the inducer housing! I cleared that gasket material completely, cleaned the assembly while I had it off, and reattached it--and voila! It worked. Now my question is what is the function of that gasket: Because the pressure switch is detecting the correct pressure, it should mean that combustion gases are safely being whisked away and up the chimney even with the gasket in place. The gap between the inducer motor assembly and furnace combustion chamber is virtually nil once screwed down, so it is unclear to me why the gasket is there. Is the gasket meant to prevent CO and other gases or heat from escaping or is it meant to keep the inducer motor cooler or simply to dampen vibration? I plan to replace that gasket with Lynn Manufacturing High Temperature Flat Gasket Tape, rate to 1000-degrees F because the Amana part is no longer available. Thoughts?

[@WordofAdviceTV]

Hi Jim! Thank you for watching, subscribing and leaving a detailed comment! Glad to hear you were able to find and fix the problem! I think you pretty much answered your own question. The gasket is there primarily to prevent any of the exhaust fumes from leaking out. The inducer motor housing is not always flush to the wall of the furnace, there may be a spot where there is a little crack in between. And secondarily it's to somewhat help with dampening the noise/vibration. That high temp gasket tape will work great! Stay warm!

[@qiangyu5898]

I can easily follow this guy's instruction. Learned a lot. thanks

[@TheViotorj]

You are very good instructor, you are clear on instructions, Thank you 😊

[@jermul4014]

Jay, I hope you read this but thank you especially for making this video in particular but also for your other videos. You saved me from having to make an emergency service call. I am not an HVAC certified technician but I am a little handy and can follow instructions. I verified that my flame rollout switches were not tripped among checking a few other things. I than did exactly as you did and jumped the low pressure switch and much to my relief my furnace began to operate correctly. You have my sincere gratitude for helping me out with your videos.

[@jamestyrer6067]

Another great video. The way you explain the topic is very good. Thanks

[@juans6639]

EXCELLENT, EXCELLENT LANDSCAPE VIDEO professionally explained with no distracting HORRIBLE LOUD BACKGROUND MUSIC!

[@CougarZeke]

Thanks Jay! My problem turned out to be a blown thermal fuse behind the pressure switch. I tested the pressure switch first and then went looking for another solution. I was able to follow the electric current with a voltage detector and it ended at the thermal fuse. When I bypassed the thermal fuse the furnace kicked over and is working well. Now I need to find the appropriate thermal fuse which should be interesting with all the Covid 19 closures

[@WillieMakeit]

Good explanation 👏 straight up could not jump off a pressure switch about a month ago. Until I figured this out. Nice video

[@CBrown07696]

Great videos! Had a furnace Friday that had no response when set to heat. When I pulled a wire off roll out the evac fan came on confirming it was not bad but I was stumped and only had a few minutes to look (empty rental) so I went on to my other calls. I will use the info from this video to continue troubleshooting Monday. Thanks again.

[@mythrol]

I find this information extremely useful because even as a HVAC guy, we simply rarely see furnaces down here or heaters in general so sometimes it's hard to remember things that I have used in a couple of years. I use your furnace videos as fresher courses especially as I start getting into the cold(ish for me) season. Thanks.

[@WordofAdviceTV]

I'm happy to hear that the videos help out! I agree with you since I refer to KZbin and Google almost on a weekly basis myself as well :) Like you said, if you don't use the knowledge for a while, you start to forget. Thank you for watching and commenting!

[@Paufit]

@@WordofAdviceTV I know safety is reason for pressure switch..blocked exhaust etc. In a pinch if left bypassed would furnace cycle again when heat is called for ?? Thanx

[@Andrew-jq3qb]

Your videos are so helpful, I refer to them often, thank you!

[@wesleyedwards6337]

I only have a year in the field & I've been watching you every step of the way since I got out of school. Keep it going because your videos have helped me make some money.

[@WordofAdviceTV]

I'm happy to hear that! Glad I could assist you in your HVAC journey! The first year is the hardest, now it should be much easier! Good luck and God bless!

[@classic287]

Your furnace is really cool 😎 Gas is better than oil. I had an oil burner in my house in Massachusetts. It made a loud bang when it started. It was a steam boiler, so it took a while to get heat out of the radiators. In the winter it cost me at least a $100 per week to heat the house to 66 degrees... And of course there was a 275 gallon take in the cellar as well. In fact I had 2 tanks, because I had a rental apartment with it’s own furnace. Before I sold the house, to move to Florida, I had to have it inspected, and low and behold they found both tanks were wet on the bottoms, meaning they had slow leaks. To sell the house I had to get new tanks installed. It cost me $4000.....I don’t miss winters.....

[@WordofAdviceTV]

My furnace thanks you! ;) From what you described, I am grateful that I have a gas furnace and that I don't work on oil furnaces.. Sorry to hear about your bad experience with them, especially that last part where you had to replace the tanks. Those things are very expensive to use, wow! Natural gas is way cheaper. Thank you for sharing about the oil side of the heating business!

[@mariod850]

What a great video 4 years in the field . I study your videos everyday 30 min a day. Thanks for making my career great. Any additional info tools tips tricks of the trade please feel free to send to me

[@tntheatingandairllc]

Great video I’m always learning and getting better from watching your videos so keep them coming 👍👍

[@WordofAdviceTV]

Happy to hear that! :) Thanks for watching and leaving a comment Terry!

[@Tonybagadonuts27]

Great video exactly what I needed to troubleshoot my unit.

[@SeanNeeley]

This knowledge is valuable. Thanks so much for providing it free!

[@oscardelgadillo7152]

Thank you for all your videos Jay! I am an HVAC student right now at my 2 year college all the way in Los Angeles and i love watching your videos to supplement everything I learn in class. I gotta say it helps out a ton. Also my professor shows us your videos too and my classmates say you explain concepts in a very clear manner. I am almost done with the program and can’t wait to get my first job in the field. God Bless!

[@WordofAdviceTV]

Wow that's amazing! :) I am happy that my videos are helping and honored to hear that the professor even shows them at school! Good luck with school and your career! The demand on HVAC technicians is going up so you definitely picked a good path. Good luck, be super successful! God bless you in your venture!

[@oscardelgadillo7152]

Thank you Jay I appreciate it!

[@juanacosta2788]

By the way jay I am new to hvac 6 months now and you're videos have help me get out of troble .. I take notes an all you're videos and write them down belive me u made me a good tech..... if u read this can u make one whit a low pressure swich and hight pressure swich on a condensor

[@mohamedalgalal4326]

Great video man

[@rafaelretiz31]

Great video.. I wish there was you yube back when I took those hvac courses at LATTC.

[@sparkeylad5155]

this guy is a very very good teacher. i know most boiler engineer wont like this guy, but i do,

[@cphonestabber2683]

Very helpful. Helped me isolate which of the 3 pressure switches causing problem. Nice troubleshooting tip.

[@victormendoza6306]

Thank you very much for your explanation you provide in this helpful vídeo everyday I’m learning more how to fix my heat furnace

[@sortom2766]

Thank you I’m always learning how to do repairs with your videos again thank you for sharing

[@WordofAdviceTV]

You're welcome! And thank you for watching!

[@Paul-bt4sw]

Fantastic. This was just what I needed!!

[@Sbregher]

You are so awesome! Your videos are great! Because of you videos I discovered I had a pressure switch problem. I ordered a new. In the meantime this tip will help me get heat until my new switch arrives!

[@rrodak]

Great information as usual. Thanks for making these.

[@WordofAdviceTV]

You're welcome! And thank you for watching them! :)

[@angelperdomo596]

Great video thanks for teaching the right way. Keep up the good videos

[@j457murphy]

Thank you, this was helpful. I appreciate you posting this

[@clee4325]

Thanks you! Just diagnosed the problem and I'm on my way to order a new pressure switch! Save money on those repair bills

[@MikeC-ry1dk]

I have watch several of your videos and I'm impressed. You give instructions on how to troubleshoot in a very professional manner. Did you serve in the military? Your teaching technique is at or above their standard. When you think they take a kid out of high school and in a year they can fix the most advanced technology on the planet. On you I say outstanding job.

[@ktheat]

You always do a great job explaining it

[@adamson715]

Great video, follow the steps talk about in this video and solved the furnace issue ; found it was a faulty pressure switch that was causing the furnace to short cycle. Thanks

[@karlparsons2031]

Hey Jay. Thanks for the helpful furnace videos--- good stuff--👍 could you do one one furnace condensation problems ? Thanks ✌

[@williamczupryn2642]

God bless you! Just jumped mine and it worked. Thank you.

[@lancerudy9934]

Your videos are very helpful. Thanks

[@heatncool]

This channel deserves 1M subscribers! More ofcourse, but just for now.

[@WordofAdviceTV]

Thanks Daniel!! I appreciate the support!

[@jozeflak1868]

Very good info I wish you would have this video 10 years ago when I used to live up north.

[@WordofAdviceTV]

Thank you! Yeah.. I think new techs nowadays have it way easier. There is sooo much information available online now. When I went to school, if I got stuck I would need to look it up in a book, refer to my school notes, or call a senior tech/other techs. Now I just consult Dr. Google or Mr. KZbin for most of my questions :)

[@karimmecherfi5346]

I’m sorry was sent by error

[@gregbiegel6468]

Great video Jay! Thank you so much!!!!! Am going to order the switch

[@praefectus6492]

I always keep coming back 2 you! 2 help me with my troubleshooting thank you

[@WordofAdviceTV]

Thank you! Glad to hear my videos help!

[@Eddy63]

Excellent Advice Mr Word ... Good vid Jay ...

[@WordofAdviceTV]

Thanks Eddy! I appreciate you always watching :)

[@Jesse___H]

you helped me fix my heater with this video, thank you.

[@WordofAdviceTV]

I'm happy to hear the video helped! :) Thank you for leaving a comment, stay warm!

[@jamesmartinomusic5969]

You are a GREAT TEACHER..!TY!

[@jerrygray695]

thank you ! I have been a hvac tech for many years and I never thought about doing that although I have ran into quite a few weird issues with gas furnaces over the years this video just showed me that I have went around my rear end to get to my elbow with this type of issue even tho I do end up fixing it you just showed me a neat short cut so thank you again.

[@KRay-fb2vf]

I have a 24 year old York 90+ something efficient. I had replaced the control module myself and was concerned about the availability of replacement pressure switches. Now I know that on a cold night over a weekend I can keep my family warm and safe until I find a replacement part. Thank You

[@WordofAdviceTV]

You're welcome! Although I do want to mention that the pressure switch is a safety switch. So unless you know for sure that the switch itself failed, I would not leave it bypassed over a weekend. If by chance the pressure switch was only doing its job and was tripping because of a clogged or cracked heat exchanger, that can lead to a hazardous situation. (I'm referring to carbon monoxide leaking out. But everyone should have a CO detector or two for situations like that)

[@KRay-fb2vf]

@@WordofAdviceTV I do have a CO detector and do inspect the fire box. But if the pressure switch goes bad without a furnace problem I have options which I thank you for.

[@WordofAdviceTV]

@K. Sorenson Great! :) Just wanted to be on the safe side. Stay warm!

[@anthonyheak3479]

Very well explained! Thank you!

[@erictapia8677]

Thanks dude! Learn a lot from you

[@DmitarVuckovic]

Thank you! Exactly what I needed to get the heat back on while I wait for the replacement switch to arrive.

[@WordofAdviceTV]

Glad I could help! Stay warm!

[@onlycodered]

Thank you for all your pressure switch troubleshooting videos. Extremely helpful. I'm typically a very handy person but have only been a homeowner for 2 years now and with my recent pressure switch trouble on my furnace I found myself out of my element. Had a HVAC repair guy out a couple times and he can't figure it out. Your videos have gone through more troubleshooting steps than the repair guy tried so I'm quite sure I'll be able to figure it out now. My guess is a bad pressure switch.

[@onlycodered]

It was the pressure switch. 😁

[@ThePlay6666]

Better make sure there is not a bird or nest in your flue pipe.

[@Rick-S-6063]

@@ThePlay6666 Yeah, that could also be the cause. My furnace had recently started giving a Code 31 and shutting down shortly after the thermostat called for heat. I used the Shop Vac and vacuumed the intake pipe out, then switched the hose to the pressure side of the vacuum cleaner and used pressure to force any remaining stuff out. Now the furnace seems to be running normally (knocking on wood).

[@Kaibil66]

Excellent explanation....you are very smart and always watch your videos, very professional.

[@WordofAdviceTV]

Thank you, I appreciate you leaving a comment! Glad you like the videos!

[@bobbybushong9551]

Its a sun and my switch went out glad your explanation helped me diagnose the problem and get some heat for my kids thank you

[@ronbern1550]

Thank you so much! You helped me troubleshot my furnace and ordered the pressure.

[@faithandfreedomshow9466]

Great video. Great help. Thank you!

[@magnusauto7941]

For an added level of safety, I prefer to use a fused jumper. Or you can add a breaker inline. Thanks for posting these helpful videos!

[@Thatguytim987]

Thank you for this just helped me out

[@Tony-rl2fr]

Great presentation, thank you!

[@eroticostudios]

You have a loyal subscriber! I've been replacing parts, boards, etc... I've had several techs here, and I finally tried this bypass method and SHAZAM! THE BURNERS CAME BACK ON. I am looking to replace this pressure switch TODAY! You are officially my HVAC teacher until I decide to pursue this professionally. Thanx a million!

[@herculesskinny2030]

Always on point as usual. Thanks

[@WordofAdviceTV]

You're welcome! Thank you for watching and commenting!

[@ThuggBoi69]

Thank you for your videos they are truly super helpful 👍

[@WordofAdviceTV]

Glad to hear that! Thank you for watching and leaving a comment!

[@tedlahm5740]

Clear concise information. Normally open pressure switch.

[@padilla7019]

Great troubleshooting information

[@brendonhastings9391]

Great video you help me out a lot!! I appreciate it.

[@WordofAdviceTV]

Glad to hear that! Thank you for watching and commenting!

[@nicolasbach1378]

Your video ...IS a life changing video...please re-listen...re-watch...this person KNOWS what the Heck is going on with your switches ...if that is your problem... So sincerely ...Thank You for sharing your knowledge... it is appreciated here...and I wish the Ball Park sends you the favor back 100 times...this advice I'm taking !!! .....🙂🙂🙂.....

[@zebracary]

We always watch you videos in class you make everything so simple thanks totally off the subject but all of us are wondering what cam your using your vids are so life like its crazy lol thanks again

[@WordofAdviceTV]

That's awesome! It still amazes me that there are classes out there that watch my videos :) Thank you! If you look at the wayyyy bottom of my video description, I list the equipment I use for filming: Sony A6300 16-50mm: amzn.to/2OmLSPF Sony 35mm Fixed Lense: amzn.to/2LPAU3A 60" Tripod: amzn.to/2mLXrU0 Rode VideoMicro Microphone: amzn.to/2Ol9KDp Neewer Halo Light: amzn.to/2LTANUK I have two of those Neewer lights on when I film and that lighting makes a really big difference, it makes everything very clear. Well and the camera itself is pretty good too.

[@zebracary]

Wow thanks so much and yes your vids are everything to us you keep everything straight up and simple I hate to say the teachers make everything difficult lol but it's ok we all know we need to know the down and dirty of it all but still sometimes its better to explain things easy and then explain why I speak for all of us you are the man and thanks for letting us know about your camera gear I'm sure in a few years in the field I can afford an amazing camera too lol anyway we all love you man and keep up the great work I think if I had to just go to class and deal with the stright up facts of HVAC honestly I would have just given up by now I think you keep it kind of fun and tell it like it is its kind of like your actually in the field and actually doing it sure the how and why are extremely important but i guess its easier to actually see things being done well you know what i mean who wants to look at a chalkboard full of formulas when you have an easy going guy just showing you and telling you like it is on behalf of all of us thanks man your the best sincerely Kary

[@WordofAdviceTV]

You're welcome! I am happy to be able to contribute to your HVAC knowledge. You and classmates sound like a really cool group of guys! Thank you for all the positive feedback! When I started making HVAC videos, one of my main focuses was to "speak in English". From what you said, it sounds like I was able to pull that off! :) I understand how you feel since I went to school and took notes for 2 years as well... Like you said, it is good to know all of that stuff but it's very different from what actually goes on in the field. I was fortunate that for the last 4 years I had a senior tech who is pretty much my mentor and that man really knows his stuff. He's the guy I call whenever I am stuck. Wouldn't have known nearly as much without his 30 years of HVAC wisdom. Anyway, I am happy to have people like you guys watching my videos and that the videos are helping with the HVAC learning! Haha and about the camera... After a couple years in the trade I am sure you will be able to afford much more than just a nice camera ;)

[@rondeak6873]

Saved my life, thank you so much.

[@markhorton5331]

Excellent video.

[@barrymartins9900]

Awesome, worked great. Now I know for sure.

[@tommystone5202]

Thanks for the vids very informative

[@vijayvaladi]

Found very useful. Thanks buddy.

[@RusGalician]

Great explanation. Thank you

[@niman8136]

Great videos bro, way better than any schooling I've received for HVAC trades. Question, how would by-passing the pressure switch rule out the pressure switch? Wouldn't it mean pressure switch is bad and everything else works, assuming with it not bypassed, that you get the furnace issue such as short cycles where burner comes on then shuts off after a minute. Thank you!

[@papa7108]

Very helpful! Thanks

[@WayneRigley]

Thank you, helped me figure out it WAS my pressure switch. being 22Deg outside and house is at 64 its cold.. at least i have heat on now.. Now i know the issue i can order one online now! thanks again

[@WayneRigley]

New switch ordered, delivered today installed and working like a charm

[@Bryan-Hensley]

@@WayneRigley Do you know how to adjust the pressures? If not it's probably useless. You are doing the same thing as bypassing because if it's not adjusted correctly, it won't shut off the furnace when it's got a cracked heat exchanger or lagging exhausted fan possibly leaking carbon monoxide inside your house. There's probably nothing wrong with the old switch. I don't think I've had but a couple bad on any furnace since I've been doing this. It's extremely dangerous for an untrained person to change a (balance switch) pressure switch. I've been doing HVAC repair since the 70s

[@WayneRigley]

@@Bryan-Hensley tested via bypassing the switch. The furnace turn on. Ordered a new switch, arrived the same day and installed it. No issues now

[@armandmelch8110]

As a technician, I love these videos that gets the home owners work in their equipment, I've made a lot of money fixing their crap after they touch it. Keep them comingbuddy 👍

[@WordofAdviceTV]

You got it man. I plan on making more. Thanks!

[@Pelasgian-Illyrian-Of-Epirus]

you are amazing how you explain things 👍🏻

[@jorigmac]

Hi Jay. I have a Fluke that allows me to check the contacts even on a hot circuit, thanks to this I get a quick diagnosis, but if we can't do that, this technique is the solution.