How-To: KTM PDS Shock Bearing Replacement

[@alexmoore4791]

Thats awesome that you didn't show the most difficult part of this job, removing the cir clip. Thanks!

[@zmoke10]

KTM service specifically says for lower bearing: ”do not put any extra grease to hem joint or sealings, it will ruin the teflon coating which is on hem joint sliding surface and drastically reduces service life” Same is said on factory service manual.

[@nickmee3321]

I just read that today to and was a little worried for this guy haha I doubt it hurts it too much though

[@MOTOKITER71]

AWESOME AND CLEAN WELL DIRECTED VID !! cONGRATS !

[@plumbit111]

nice job! need to trash the pipe!

[@blackleapord23]

What do you use to clean your bike? Last time mine was that clean was the day I bought it!!

[@oktayoktem]

Thanks bro

[@hergaster4443]

I love the part where you showed how you removed the spring ring....

[@Simo-iu7xv]

can you Show how to install a Led bar on the motorbike

[@sebixfgds526]

hi man im having trouble getting the snap ring out on the higher bearing of the shock, ktm 250 sxf 2006, could i maybe get some more explenation on how to do it? thx

[@ajgrattan]

should there be any twisting play in the shock after this is completed?

[@maucina12]

Is it better to insert and remove bearings with hammer or long screw and slowly pushing it while screwing

[@rmatvmc]

*maucina12* Pressing the bearings in when you can is best. Or the sweating method. The hammer method works fine. Especially with this Motion Pro Specialty Tool. As long as you are striking the outer race of the bearing and using the appropiate size socket you'll be fine. Thanks for watching.

[@nashjones701]

I have replaced my upper and lower shock bearings with new all balls kits but there is still movement in the upper bearings. Is this normal?

[@rudyardkipling1905]

Yeah the spacers and seals come out that easy😬

[@sherb118]

What light bar mounts are those??

[@rmatvmc]

Those are the L-brackets that come included with the Tusk light bar. You can check them out here: www.rockymountainatvmc.com/parts/tusk-led-light-bar-p

[@maverick2242]

Yeah that header pipe looks like it needs replacement ASAP, Yep those bearing are f****d I replace mine way before that lol🤣

[@kylebolton3240]

This channel is good but it really annoys me that they don't demonstrate the job being done as if everyone doesn't have the unnecessary tools. I mean a seal puller REALLY!?

[@DonDonF250]

Looks like harbor freight tools

[@hreindustries]

what kinda bike is that