How to Laser Engrave Tumblers with the xTool Rotary Attachment

You all have been asking me how to engrave tumblers for a while now! The xTool Rotary attachment makes it easy to do laser engraving on tumblers right in your craft laser. If you have an xTool laser, you can make this attachment work for tumblers and so much more. If you choose the RA2 Pro, you can do almost any cylindrical or round object as long as it is not too large. That means there are a wide variety of things you can laser engrave in your machine. So add a rotary attachment to your xTool laser and get started with tumblers and so much more!
This laser was sent to me by xTool, however, all projects and opinions are my own.
Get the rose file here: angie-holden.ck.page/3d89edd865
Get the best mom ever file here: lingering-pine-4030.ck.page/6...
Check your measurements with video from ‪@LilyRoseCraftroom‬ : • How to Engrave Curved ...
Links below may be affiliate links.
Get the xTool Rotary Attachement: www.xtool.com/products/xtool-...
Get the xTool S1: bit.ly/42PnRHW
Get the xTool riser base: www.xtool.com/search?q=riser&...
Free laser buying guide: www.laser-ready.com/
Other videos you may like:
Laser Safety Video • Laser Safety: Safety T...
More About the xTool S1 • xTool S1 Laser: Setup ...
xTool Screen Printer • xTool Screen Printer: ...
Be sure to follow me on social as well!
Instagram / angieholdenmakes
Facebook / angieholdenmakes
TikTok / angieholdenmakes
#xtool #xtoolrotary #engravetumblers
0:00 Introduction
0:22 Rotary attachment
1:27 Adding riser base
3:19 Chuck vs rollers
4:10 Rotary accessories
6:35 Chuck set up
8:02 Adding tumbler
10:18 Adding to laser
11:21 Measure tumbler
12:13 Designing
14:50 Settings
15:11 Framing
16:05 Engraving
16:47 Finishing
17:16 Tumbler with handles
17:43 Using rollers
18:06 Results
20:06 Testing settings
21:30 Which lasers?
22:25 Wrap up

[@ritalavin53]

I'm new at this and VERY OVERWHELMED! Thanks for doing these classes!!

[@AngieHolden]

Yep! I hope you like them!

[@susanmurray5535]

Hi Angie thanks for your classes they are great

[@AngieHolden]

Thanks for watching!

[@dcaldwell8165]

Great Video Angie! Very thorough on everthing a newbies would need to get started. Definitely more thorough then any I reviewed when I purchased my M1and RA2 Pro a year ago. Great Job!!

[@AngieHolden]

Thanks!

[@pegmartin200]

Hi Angie! I'm looking forward to the Sublimation Camp 😊

[@teresamacinnis8129]

hello Angie! Coming from Ontario Canada!!

[@Mlingg007]

Can't wait to try this!

[@AngieHolden]

Hope you like it!

[@ronr179]

Great video 😊

[@AngieHolden]

Thanks for watching!

[@sherryfaphimai1137]

Great channel!

[@AngieHolden]

Thanks for the visit!

[@debbiesalas4948]

Tubler

[@RBLACKPEARL7]

Very nice ❤

[@AngieHolden]

Thanks!

[@galefondren3226]

Nice, can afford this yet.

[@bscreager]

I recently got a S1 40W with riser, and rotary attachment from my husband as a gift. I am struggling with knowing how to choose "settings". Is there a guide or how do you make the first guess/choice?

[@AngieHolden]

I have been googling it and looking at options!

[@DavidFrady-ws6fw]

What power and speed do you recommend with the 40 Watt Laser? Thanks

[@AngieHolden]

Mine is the 20W and the settings I used worked well as a starting point for that laser. I do not have the 40W.

[@sandracolins2788]

How long did the purple and teal one take

[@AngieHolden]

25 minutes maybe? It wasn't too bad!

[@beckyzayas5749]

Too complicated.