How to Layout Recessed Lighting

We'll show you the steps to layout recessed lighting. We hope you enjoy our how to video!
Thanks for watching! Leave a comment about your favorite part, feedback or what you'd like to see in future videos!
How to Install Canless Recessed Lighting: • How to Install Canless...
Social Media:
Facebook: / anyhourservices
Instagram: / anyhourservices
anyhourservice...

[@williamjanowski2264]

Man that was great..... I am never sure how close to put them to a wall. Loved the demonstration. Also the distance to fan blades.

[@McmM-cv9sb]

Your information has been very helpful, thanks. I'm in the process of installing recess lines..

[@nancymihalcin1982]

Thanks for getting right to the point and not excessively repeating yourself. Also, you were the first video I finally found that actually specified distances between lites! It's what I needed to know. Thanks

[@kevinmach730]

Appreciate the video, this was helpful and gave me some things to think about, mainly the spacing of lights. You are more or less in line with the spacing others suggested in their videos. I've seen some say you can go as close as 2 feet from the wall, but your demonstration in moving it in various positions in relation to the wall or ceiling fan were incredibly useful. After seeing you do that, I decided two feet from the wall was really just too close.

[@lynettemccoy1254]

Perfect! Now we know where to install our new lights! Thank you!

[@SavedByFaithInJesus]

Grreat video. appreciate the demonstrations of strobe and hard shadows. Buy more than you think you need, you can always return it later. For plumbing I buy 2 extra of everything, 1 to screw up, 1 to do it right and 1 for when I have to change it.

[@desdeelinicio8185]

Thank you! Your Video gave me a more Clear and understanding about how to place the lights and where to put them. 👍

[@Anyhourservices]

Glad it was helpful!

[@lt9336]

My dude Mike !!! , you always bring about an. Amazing Energy !!! GodSpeed my Mann

[@darren1922]

This is very helpful because I'm about to do this job in my living room. thanks!

[@manyam5794]

GREAT video!!! Please Help.....My electrician installed exterior soffit pot lights, FC 4 inches, slim panel 9W = 80w, 750Lm, Color accuracy >80 Ra, 4000K Dimmable but the house looks grayish/white It changed the color of the brick exterior to cool tones and looks awful. I tried to use the dimmer to the lowest set but still very bight greyish instead of a low soft warm light. This light comes to 3000K option but i am afraid it will be very yellow/golden tones. What is the Best LED color temperature for my black soffit, red brick exterior for soft warm light? Thank you in advance, M

[@micahcollins1714]

Good info, to the point and good examples! Thanks!

[@JillKnapp]

This was amazingly helpful. Thank you so much! The LED wafer lights you mentioned are exactly the ones we're going with, coincidentally. Thanks again!

[@jenniferfrajerman4123]

Excellent video with demo of impact to light placement. Any thoughts on placement in an office for nine foot ceiling. I was targeting 38” off each wall and four feet apart. Thoughts ??

[@blt981]

Thank you I’m confused about defused and flat covers. Does it make a difference

[@chanelv5373]

Thank you for the all the great information. It is very timely for me.

[@KambriaS]

Great video. Very helpful.

[@FKS1994]

Great explanation! Will you do an installation of these and video it?

[@Anyhourservices]

Yes. I believe we're trying to release the install next week. Make sure you're subscribed, if you're not already, so you don't miss it. Thanks for watching and commenting.

[@MrWFeather]

Thanks for the info, I am in the planning phase very helpful thanks

[@leeniven375]

Remodel project. Very good content!!

[@petercliff4313]

Mike, I have been looking into the Halo HLB wafer lights. One model says it comes with an AirTight IC Baffle. Do I really need an Insulation Contact baffle with these LED lights? Installation is on the Main floor just below the attic. I can see that the Air Tight seal would be good on the ceiling leading to the attic but I am putting some of these in the basement ceiling as well. The basement ceiling will have insulation to keep noise from the Man Cave getting to the living room but is the contact with insulation really going to cause the light to overheat if it is not at least 3" away or do I need to buy the expensive light with the IC baffle?

[@PD-Pro-Go]

Solid video dude :)

[@adamarcher3052]

Great tutorial

[@brownster1979]

Thank you for your advice

[@chrisduffy76]

Thanks for the video I am refitting my kitchen and putting spots in so this is great advise “I am sorry but I just can’t let it go

[@CME_876]

Where would you put the junction box if you have a concrete ceiling. ??

[@CME_876]

How would you add the recessed light in a deck ceiling. Where would you but the connection box in the deck ceiling

[@freeflyingca]

i have 3ft wide hallway with low ceiling(less then 7ft). looking for spacing and lumens per light.

[@jenniferfrajerman4123]

Big fan of the new wafer lights he mentioned as location (of joist) does not matter. Just pick the center

[@mattgreiner846]

How did you wire up the light so you could see shadows?