How to level your Cub Cadet mower deck LTX 1000 series

I show you how to level you Cub Cadet mower deck very easy (step by step) LTX 1046 KW, 1040, 1042 KW, 1045, 1046, 1050, 1050 KW
Thank you very much for watching and God bless.
✅Ratchet Wrenches set. amzn.to/37X6ZGH
✅socket set amzn.to/3wtPTdB
✅ My T-shirts. Thank you for supporting my channel✅
diy-jim.creato...
5% off shirts use DIYJim2021 when checking out
✝Bible ESV easy to read amzn.to/3qshNQP
✝Bible NKJV amzn.to/30ns322
✅Titan Solar Generator (large generator) poweredportabl...
✅Go Pro that I use amzn.to/2WC6WXH
✅Wireless mic used: Rode Wireless Go amzn.to/2WxQt7c
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
*Disclaimer - Thank you for visiting my KZbin channel. Please understand that the content on the DIY jim KZbin channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my KZbin channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my KZbin channel.
#levelyourcubcadet. #howtolevelyourLTX1046KW. #howtolevelyourmowerdeck

[@DIYJIM]

(click read more) Here are some links to some of the tools I used. Thank you very much for watching and God bless. ✅Ratchet Wrenches set. amzn.to/37X6ZGH ✅socket set amzn.to/3wtPTdB ✅ My T-shirts. Thank you for supporting my channel✅ diy-jim.creator-spring.com 5% off shirts use DIYJim2021 when checking out ✝Bible ESV easy to read amzn.to/3qshNQP ✝Bible NKJV amzn.to/30ns322 ✅Titan Solar Generator (Awesome large generator) poweredportablesolar.com/ref/48/ ✅Go Pro that I use amzn.to/2WC6WXH ✅Wireless mic used: Rode Wireless Go amzn.to/2WxQt7c *Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites. *Disclaimer - Thank you for visiting my KZbin channel. Please understand that the content on the DIY jim KZbin channel is intended for informational purposes only. I make no warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information posted on my KZbin channel is strictly at your own risk, and I will not be liable for any losses and damages in connection with the use of my KZbin channel. #levelyourcubcadet. #howtolevelyourLTX1046KW. #howtolevelyourmowerdeck

[@liottastudiosllcFineArt]

Cleanest lawn tractor I ever saw.

[@DIYJIM]

Thanks

[@ThePoppyseed93]

After changing my belt things were sooo far off. You made a clear to the point video that helped a ton! Thanks, gotta love the Tube.

[@DIYJIM]

Thanks for watching

[@sandrarichardson2713]

Watched this same video you did on John Deere. Both very good videos. Only the information you need....no more, no less. Thanks for not wasting folks time. Really good work and good info. Plain and simple. Jesus bless.

[@DIYJIM]

Thanks 👍

[@sergegravel3205]

Very useful video. Clear explanations well filmed and very straitforward. Thank you so much Jim.

[@DIYJIM]

Your welcome Serge

[@davidyungbluth2741]

Very clear demo. I was given a used cub cadet with no manual and had to replace drive belt and put on new blades. Had no idea how to level the deck. Your video is one of the most professional that I have viewed.

[@DIYJIM]

Thanks for watching

[@Oldnoitall]

A level deck with good sharp blades is one of life’s great pleasures with an oil and filter change is just over the top almost up there with four new Continental tires on the family car !!!

[@DIYJIM]

Couldn't agree more!

[@blubal42]

Just what I needed to see and straight to the point! So quick I didn't get any ads from KZbin, big plus!

[@DIYJIM]

Thanks for watching my videos glad they helped you

[@todd_shillington]

Thanks Jim, this is a very helpful video. My deck is in decent shape, so I just measured at the points you suggested with a little combination square. Using the ratcheting wrench made it easy. Side to side was almost dead on, so I left it alone. A big difference in cut quality, thank you!

[@DIYJIM]

Glad I could help thanks for watching

[@lutherrisma4524]

you’re awesomely clear and helpful for me to raise awareness

[@DIYJIM]

thanks

[@bobw.991]

Thanks for the good info. I have a lxt1040 2012 cub. You've really helped me with knowing how to on it.

[@DIYJIM]

Glad I could help

[@edhartman2860]

Thank you so much!....I just leveled the deck on my LTX1042 using your video....Bingo!

[@DIYJIM]

Awesome glad I could help

[@ltsnotspill6846]

Thank you for the video Jim. This is something I never thought of. Now I can't wait to play with my mower in a couple of weeks. C'mon summer!

[@DIYJIM]

Thanks for watching my friend

[@johnblauch5995]

Very helpful. The block idea is great. Saves a lot of time. You did a fine job explaninging what must be done. Thanks and Gob Bless.

[@DIYJIM]

Glad you like thanks for watching John

[@stevenbitondo6646]

Great video. Perfect explanation for what i was looking for. Now i Know why don't get an even cut. Can't wait to check it out. Thanks

[@DIYJIM]

Awesome! Thank you for watching

[@williamkaczmarek3996]

Thanks again for another great video tutorial. This will help me with my tractor which is the same as yours.

[@DIYJIM]

Awesome, you mean same as my neighbors

[@CharlesdePasquale-fz2nr]

Your video was very helpful! The only thing that it didn’t tell me was how to lower the right side of the deck. I have the mechanism on the left side of the deck adjusted so it’s up as high as it can go, but the right side is still higher.

[@DIYJIM]

Something seems to be wrong is your deck bent?

[@CharlesdePasquale-fz2nr]

I don’t know how that would be possible. Is there a way to adjust the right arm lever or cable from pulling up as far or to adjust the left side cable higher

[@DIYJIM]

@@CharlesdePasquale-fz2nr there is only adjustment on one side

[@user-gk4gd1xc2w]

Thanks for the demonstrated instructions

[@DIYJIM]

Welcome

[@donaldprichard692]

thanks, I'll check my deck using this video. my grass is cutting taller on the left side. Hope this is the fix.

[@DIYJIM]

Hope this helps. Thanks for watching

[@chargermopar]

Nice detailed job. I forgot how the blades should be angled to the lawn. My mower has sat under a tarp for over 4 years decaying since the ducks ate my lawn and there is nothing left to mow.

[@DIYJIM]

Thanks for watching not sure if the ducks eating your lawn is good or bad I kinda like too mow my grass. Lol

[@chargermopar]

@@DIYJIM I have a small yard so mowing just doesn't add to the looks much. Once I move I am sure I will have a lot of mowing to do the roadside alone is over 600 feet . The ducks do lay nice eggs so no big loss having the yard all dirt. At least there are no weeds anywhere!

[@timber66]

Thanks a lot. You saved me a lot of time.

[@DIYJIM]

Your welcome

[@TheNewenglandboys]

My new Cub has adjusting rods on both sides on the back of the deck so both sides can be adjusted. I set my cutting height at 3” Then with a 3” block I slide it under the blade as you did on both sides. On the left side you have to feel when it’s just touching the blade

[@DIYJIM]

That’s definitely better than one side adjustment. Thanks for watching

[@ClavierComposer]

Thank you for your helpful video. What I would have found more helpful would be if you raise and lower the deck with the side handle to make sure the travel between the hi and lo notches is correct.

[@DIYJIM]

Great suggestion! Thanks for watching

[@mikefruge8589]

Very helpful presentation! Thank you!

[@DIYJIM]

You're very welcome!

[@chrisbozarth9485]

Made it simple

[@DIYJIM]

Thanks for watching

[@izzycamaro]

Thanks for the nice video, just what I needed to level my i1046 time saver.

[@DIYJIM]

Glad I could help

[@ronniemartin8540]

Great video. God bless.

[@DIYJIM]

Thank you!

[@cwcole]

I have the exact same model. Thanks for the help!

[@DIYJIM]

Your welcome thanks for watching

[@Mr91495osh]

Excellent advice, thanks

[@DIYJIM]

Welcome, thanks for watching

[@opt6037]

Worked a charm. Thanks 🙏🏼

[@DIYJIM]

Glad I could help

[@zanedeskins8886]

Very helpful. Thanks

[@DIYJIM]

Welcome thanks for watching

[@timk.8372]

Can the side to side adjustment be done while the deck is off the mower for Belt replacement?

[@DIYJIM]

No the deck needs to be on

[@monzsterman]

So you have the blade height about 2.5 inches assuming the top block is 1/2 inch but your height gauge handle is at 10. So my question is what do the numbers mean on gauge handle because it doesnt have anything to do with the height of the grass being cut.

[@DIYJIM]

You are correct the deck height numbers do not equal the height you are at. So in my video I just show how to level the deck. Thanks for watching

[@monzsterman]

@DIYJIM I guess the thing to do is after you get it level is measure at different inches and make your own height gauge. Thanks for showing this. I'm more of a visual person. Reading how to do it was confusing.

[@tngolfgame]

I have that model and I need to know how to adjust the cutting height. When I am in the highest height with the handle the blades are only 3.5". I'd really like to get them to the indicated max of 4".

[@DIYJIM]

That was my neighbors mower if I remember I really don’t think there is a easy way to adjust the entire deck so it cuts higher. Sorry I can not help

[@tomwelke1666]

Had the same question…seems like you can only adjust the left side for some reason. Been trying to figure this out for a month. Keep me posted if you figure out how, please!

[@DIYJIM]

@@tomwelke1666 Just make the left side The same height as the right side.

[@ciphercode2298]

@@DIYJIM I bought mine used and I've got it adjusted to where it cuts level,but like others have mentioned its highest setting is to low. Mine is mowing at 3" on its highest level and the deck drags a little when I'm loading it on my trailer. I looked up an online pdf of the manual and it says the max cut height is 4 inches. The only thing I can think of is possibly stretched lift cables. They're cheap,but look like theyd be a pain to replace. If anyone ever finds out more,please let me know.

[@DIYJIM]

@@ciphercode2298 that was my neighbors mower sorry really can not help you hope you figure something out.

[@KUBBI7488]

Good job!

[@DIYJIM]

Thank you

[@jimkoyish7053]

My cable that pulls the deck up and down engages on the right before the left, so that the deck on the left is always lower. I checked the position of attachment is equal on both sides and that the cable is also the same and is at the same length as a new cable. What can be done?

[@DIYJIM]

Sorry Jim I would have to see it. I would just make sure your mowing level

[@mikeoxbig7890]

So the right side is stationary and only the left side is adjustable to match the right side?

[@DIYJIM]

Correct

[@sissymurphy9620]

What about side to side , Ihave a 2016 1042 kw and the deck is uneven side to side not back to front . I have cables that hold the deck in the back on each side and not the rods like others show on here . . Now i will have to check mine i never looked at those . Interesting where is your pulley covers on each side , I am also having a problem with the belt coming off one of the pulleys and the discharge side . The belt seems tight wnen i engage the blades and it is a new belt . I just put on a new drive belt also , both kevlar belts . I use youtube to repair my 2 cub cadets as I am in a rural area and there is only 1 lawmower shop here and he is always backed up . I am 69 year old woman believe it or not . I have 3 + acres so I just bought a 46 inch cub cadet 3 months ago . Now I know about that I will have to look at those brackets . But hubby has 3 surgeries schedualed for monday after his heat attack so hopefully can look at this today or tomorrow . I will save your video . I check tires and oil and air filter often

[@DIYJIM]

Hope everything goes well with your husband. Wish I lived near you I could stop and help. I’ll say a prayer for you and your husband.

[@sissymurphy9620]

@@DIYJIM thank you and will try to figure this out before then , if not it will be a while after . i ordered the new belt . Be safe and be healthy That is all we can ever ask for

[@DIYJIM]

@@sissymurphy9620 thanks you also

[@monsterxx1213]

Took you 8 mins to show where the bolt was to adjust

[@DIYJIM]

Thanks for the comment. Have a wonderful day. Sorry you watched my video and it took up all your time. I hope at least it helped you.

[@shobud7561]

Google Job..

[@DIYJIM]

Thanks for watching

[@toddscheidt9590]

I'm sorry that I started watching this video. You're talking like we are kindergarten kids.

[@DIYJIM]

Sorry, you’re the first to say that. Thanks for watching

[@monsterxx1213]

This dude is right unplug the spark plugs and use wood blocks is prolly the biggest joke of a video you wasted enough of my time blabbing on for minutes when it coulda took you 2 mins to show where and how to level the deck horrible KZbinr please never make another video again you just waste everyone’s time

[@allenmarshall9061]

Jim assumes that most people have never done this before. Why because most everyone has never done it before. most don’t have an air compressor or wrenches to do anything. Now 78 years old, I have to treat all that asks about this, like they don’t have a clue what I’m talking about. Retired International Harvester technical writer. Research and Development Center, Hinsdale,Illinois. Last manual I wrote was on a Cub Cadet. Now out of business since 1980.