How to load / unload multiple hoppers or trailers with Courseplay in Farming Simulator 19

[@brucegay4847]

I bought a gaming desk top from NZXT, AND IT IS BEAST! I’ve been watching you long enough now I am able to do several thing with course play. I really appreciate it, all the time you put into this. Thank you,keep it up.

[@KederkFarms]

Glad to hear it!

[@slapy4648]

Nzxt on top babyy

[@joewirges1476]

That really helped me understand the new CP a lot more..thanks for that man!!

[@KederkFarms]

Glad it helped!

[@jackblanch7351]

I love these tutorials for course play

[@KederkFarms]

Thanks for the feedback!

[@ianbrown3855]

This is something I’ve been wanting to do for quite a while

[@patrickwende3237]

Hey Kederk, you are becoming a Courseplay-Expert :) Keep it up, I really like your video's

[@KederkFarms]

Thanks! I keep learning new things every time I make a video on it so far from an expert still. :-D

[@ZimNanigans]

Hi please do more course play tutorials. U are the 1st I have seen with the new courseplay update.

[@KederkFarms]

Thanks, I've got a couple more in the queue. Hopefully find time soon!

[@jeffinkc9272]

This is one mod I am starting to mess with, thank you for the info!

[@KederkFarms]

Glad it helped!

[@matthopkins480]

Yes! I have wanted to be able to do this so bad. Thanks! I use the pacesetter by buddy but I just don’t like filling the truck in one spot. Just not realistic. I hope in the next farming simulator it is possible to overfill the trucks that way as a bank out driver I have to drive forward so it doesn’t overfill. I know course play would struggle with that though so I don’t know if I would end up liking it.

[@KederkFarms]

I was super excited to figure this out as well. Glad you found it helpful!

[@DreamKeeper.]

Is there a way that I can get a Congo’s combine to make a strip down the middle then make that strip wider so that the auger is always on the inside? Do I need two combines for that or can I do that with just one?

[@DJ_Tasha_Nicole]

I'm having issues where my graincart/overloader sits at the first wait point. Any ideas?

[@devenfilms5129]

Found any solution?

[@Blank_35]

It was doing the same thing to me, all I did was go through all the transportation types at the bottom and ran them all using the same course I created, and then I went back to the overload type and it just started working. Don’t know if your gonna understands this but I was just sharing how I got it to work for me.

[@bowslinger2004]

With the latest version the truck now moves forward once the first hopper is full. The two wait points no longer works since after the truck moves forward the second wait point is not over top of the trailer.

[@amazingbutter345]

Thank man you are a life saver been trying to figure why the tractor wasn't moving after hitting the first wait point

[@ianbrown3855]

I can’t wait to test this out

[@gary1143]

Me also

[@dmac8831]

i am a little late on finding your vids. Great job on dong them.

[@prax3956]

Thanks, that cleared up a few things for the new CP updates. It's been a while since i've played FS19, thanks Kederk! Another note, is it just me, but even with the fuel save option enabled, my semi will not shut down its engine while it waits for the overloader, booo

[@vincenzobrennan3305]

i guess Im asking the wrong place but does any of you know a way to get back into an Instagram account?? I stupidly lost the login password. I would appreciate any tricks you can offer me

[@rylanemery1238]

@Vincenzo Brennan Instablaster =)

[@vincenzobrennan3305]

@Rylan Emery I really appreciate your reply. I found the site through google and Im waiting for the hacking stuff atm. I see it takes a while so I will get back to you later when my account password hopefully is recovered.

[@vincenzobrennan3305]

@Rylan Emery It did the trick and I now got access to my account again. Im so happy:D Thank you so much you saved my account!

[@rylanemery1238]

@Vincenzo Brennan Glad I could help =)

[@dannymutton7616]

Do you have to draw your course with grain in the trailer. I have tried to do exactly what you have done in the video and I have set up the course probably 10 times and I cant get it to stop and and dump the grain. He just blows right by and goes back to the stating point and stops. I'm using version 1.0 of the map(the only version I can find) and version v6.02.00076 of courseplay.

[@madmaxfarms7980]

Ok Thank You

[@faberfarming]

Thank u for this great video ! it wil help a lot of players :D

[@KederkFarms]

I hope so, I'm still learning new things as I go!

[@jeffh5944]

Course Play or Autodrive and why? I have seen you use both, so I’m just curious which you prefer or do you use both for different tasks.

[@KederkFarms]

I use both, before this update I would have told you that Courseplay is for field work and Autodrive is for moving around the map. Now that Courseplay can handle multi hopper trailers I'm re-evaluating which I will use for selling crops. In general Autodrive works great for moving equipment around the map over long distances and is easy to add additional paths onto an existing network so you can grow it organically. Courseplay works best for specific well defined tasks I.E. Harvesting, taking crops from a defined point a and b, etc. You can do more things with Courseplay but it's not as flexible as Autodrive when it comes to getting around the map. Might be worth doing a video to expand on the differences at some point.... :)

[@jeffh5944]

Awesome! Thanks for the insight. Always look forward to seeing your content. A comparison video would be a great idea.

[@ethanhafer1894]

The John Deere DB 60 is out for all platforms right now

[@KederkFarms]

Awesome!!!

[@ethanhafer1894]

What's a good map on console for a John Deere farm

[@KederkFarms]

I'd go for one of the American maps. Maybe Stone Valley or New Woodshire depending on how big of fields you want. Lone Oak was also a decent map.

[@markkothefarmer4735]

thx I think corseplay is simpler than autodrive :)

[@the_lifeofjacob]

Great video, just one question, does the grain cart work, if you set it up outside the field? I have lots of space outside my fields on my map, where the loading of the trucks from grain carts can happen..

[@KederkFarms]

Yeah absolutely. You still want your start and end points to be on the field but then you can have the grain cart driver go anywhere on the map to unload. It'll just follow the course.

[@the_lifeofjacob]

@@KederkFarms so are you saying that the start and end points HAVE to be on field? Will courplay do some funny stuff if the are somewhere else, next to the field?

[@KederkFarms]

Generally yrs. If the are close to the field it will probably work but remember the start and end points are to help the worker go from the field and get back to it. Generally best practice is to this out them on or at the very edge of the field to avoid any pathfinding issues

[@edwinwarford7927]

Hey Kederk . I have a question if i use the batco auger and the drive over pit that comes with the auger. Do i have to stop at the drive over pit to unload it? If you can find this out it would be greatly appreciated. Thanks

[@KederkFarms]

I haven't put much time into getting that scenario to work. Tried it briefly and the dump trigger was so small Courseplay had a hard time detecting it. Maybe if you set a wait poit

[@jacobtyler1145]

Hi, I believe you said that there is an option in new millennial map for course play to unload into grain bins. Where would I find that? or is it there automatically? sorry if stupid question.

[@KederkFarms]

Only to unload into the bins. In order to fill the trucks you will still have to do that manually I believe.

[@Vortex-Gamin]

Great video. Had heard that they added this function but hadn’t had a chance to update. Will be updating to include very soon.

[@KederkFarms]

Glad it was helpful!

[@StickyIckyProductions]

New to the game, how do I empty the second part of the trailer?. Front empty’s well but the rear won’t empty.

[@KederkFarms]

If you're doing it manually press U to switch between hoppers

[@richwyattgmail]

Kederk Farms, I'm having a heck of a time getting CP 6.4.0 to handle grain transport from field and unloading... My course for the overloader stops at the first hopper in the Wilson, will not proceed to the second... I believe I have the same problem with unloading at the silo... I'm missing something, clearly. Help? :)

[@KederkFarms]

The newer version of CP has some more advanced settings for when to move on to the next wait point. There should be a course specific settings tab and it'll have different levels for drive on that you can use. I haven't done a tutorial on it but if you check out my Flint Hills series I'm pretty sure I showed this off in a few different videos as I had similar struggles getting things setup with the newer versions of CP.

[@richwyattgmail]

@@KederkFarms Perfect. I’ll check that out. I know one of the videos you mentioned something about the field grain refill but I couldn’t find where you actually set it up. I’ll watch those. 😊😊 Unrelated. Have you ever tried 4 plows? I did and it didn’t work out so hot. 😂

[@175firefighter]

I came to the video to see how to set up the grain carts. at 2:20 you said you already showed a video on this and that you would link that up above. Can you post that link in the response? I'm still wanting to learn how to set up the grain carts to rendezvous with the harvester and go to the truck to unload.

[@KederkFarms]

I cover that in this video here: kzbin.info/www/bejne/maa7hqmnrZyGgLM

[@jeffm9722]

I am trying to use the park for 2 crain carts so that the 2nd cart doesn't plow into the first, but then it doesn't get going again. How does park work and when does the vehicle move on?

[@denniseft6460]

Kederk Farms, I see your tractor does the same as mine on auger wagon duty, why does it not run faster than 14mph, when you have a top speed set at anything faster? Any ideas? FS17 did not do that.

[@ianbrown3855]

Does it work when you’re selling your crops from your silo to the Sell point ? I believe it does but I just want to ask

[@KederkFarms]

Yes, this should work with dumping into any trigger. Sell points or grain storage.

[@BW-0217]

I cant get CP to fill the second gravity wagon when I fill from my silo. I added a wait point and still nothing

[@gary1143]

Thx for the vid have downloaded coarse play but could not find a good description of what button doors what and no good videos

[@KederkFarms]

Glad I could help

[@gary1143]

@@KederkFarms from watching a Dagerwin video, when seeing a combine or something like doing field work select turn instead of smooth and do not have missed pieces in corners

[@3verland]

Can you please tell me what version of CP you were using in this video. I took a break from FS for (3) months, and when I came back I started a new map, and tried CP v6.02.00079, and neither Overload or Combi modes will work. I can create a course similar to yours, but OL vehicle will never trigger to unload the combine, and they same thing goes for the Combi mode. Combine fills past set limit, and both auger cart and truck/trailer (combi) will just sit forever, and never go to combine, even when combine is stopped at a 100%.

[@KederkFarms]

Quick tip: You can see the version number in the lower right hand corner of the coureplay window when it comes up. Looks like I was using .00059 at the time that I recorded this video. It's been a few weeks since I updated, I think I'm currently on .00072. I've had issues where it takes a long time to find a course due to pathfinding. I'd recommend bringing up the debug console / looking at your logs to see if Courseplay is giving you any messages they tend to be pretty helpful in troubleshooting when things go wrong.

[@pinseekergaming4760]

I really really wish this was on consoles Can you do a potato harvest? With course play

[@KederkFarms]

I've never tried it but it should be possible

[@iowamagicman]

So the tractor I have set on the route to the leg doesn't stop at the field. The cart tractor doesn't stop at the first wagon either. Any ideas?

[@craigsharfenberg4517]

So I’m trying to figure out how to load a truck with a hopper bottom from a mother bin at the edge a field, to my grain site. Got any ideas on how to get the truck to fill both hoppers off of it? TIA

[@stevo6572]

Thanks for the video, really appreciate it. Work on your business not in it...courseplay allows us to do just that!

[@jacobpruett9204]

i've been having issues with my chaser approaching the combine from the front and then stopping when it turns to get alongside saying it's stuck in traffic, any ideas?

[@MrTekkiters]

Why do we have to wait for the first dot on course play to pop up again?

[@rikuthetiger-cat7366]

Hi, Help . mine just keep creeping forward and miss the trigger. also it doesn't unload the first cart and the overload course just misses the stop trigger also. so i have to move the other auger wagon. also when i right click any where even out of a vehicle it activates the mouse and pull to my second monitor. i got the last version of courseplay

[@gustavoevangelistarodrigue8430]

Thanks, a good tutorial.

[@KederkFarms]

Glad it was helpful!

[@mikelangelo2020]

@@KederkFarms I used your overload set up, but my auger just sits at the first waypoint. Any suggestions?

[@bigtonytomato]

My vehicles aren't shutting off anymore when fuel save is on. Wierd

[@CarlJohnson-km8zr]

anyone help? can't get overloader to work at all on any map or fields ive tired different tractors.... it shows it is assigned to the combine but never moves

[@Powerlinx88]

course play just had a update a couple of days ago

[@hendrik1636c]

Where do we get the updated map?

2 Harvesters with CP, 1 overloader with CP, 2+ Hopper Trailer with AD How should it be set up? CP and AD are the last version.

[@shirleybrinton4097]

Where is the version of this map that they auto unload by grain bins

[@hendrik1636c]

Does this work when unloading into augers?

[@savyoyster2829]

how do I unload back hopper on xbox fs22?

[@michaeldunn5362]

I've tryed to do the exact in your vidieo. I have a issue with the grain cart leaving after setting a wait time or no wait time. And helpful ideas? What I could b doing wrong? Version 6.03.00022. Current. Courseplay.

[@kdg2007]

Have same issue. Will not pull up to 2nd hopper after filling 1st hopper to 100%. Have Park waypoints setup for both spots. Wilson Pacesetter for trailer.

[@MrJokeBFH]

I have problems with my truck, just keeps driving around

[@wyattlemon9598]

I can’t get him to stop for both hoppers? I need help

[@KederkFarms]

Upgrade to a more recent version of course play. I'm on .00064

[@cashmuthafkinmoney9947]

How do you run on keyboard

[@KederkFarms]

Hold the shift key to run. I often use the Easy Development Tools mod to increase my movement speed when recording as well.

[@jernmanden1]

when i try to do the 2 courses they drive too far im using now version 6.03.00016 dev