How to Lower a spare tire on a Ford Econoline Van

How to lower a spare tire on a Ford Econoline Van

[@sethdawg]

Wow I finally learned what that nut is. Swear I had no idea what the nut was for thought it was adjustments for left rear door 😂😂 awesome 👏

[@maxwellhouseranch1004]

Glad this helped.

[@hunterventures2101]

best trade vehicle going. Thanks for the video, taking my tire off now.

[@scottpatrick382]

great job with the video, was able to figure out what type of tool form to create at the end of a 1/4 inch rod so i could operate the winch, now if i get a flat i can pull my self up by my own boot straps , wow if only i had you tube when i was a kid

[@maxwellhouseranch1004]

Scott Patrick Thanks man. I know what a gift we were given with KZbin

[@roberttrask6826]

Thanks for a great how to video. Very helpful!

[@marvin4025]

You’re the best boss! You save me a headache and I was messing with it for about an hour! Thanks for video!

[@maxwellhouseranch1004]

Your welcome. Glad this helped out. Sorry the video is all over the place , but I was all by myself.

[@trevor959]

I was stuck on the side of a major highway .. thanks for your help

[@jaykozokas2983]

You just saved me from beating my head against a wall trying to figure out how to remove this tire.

[@maxwellhouseranch1004]

Glad to save you a trip to the emergency room, consider subscribing if you haven't already. Thanks

[@alteredtimephotography8724]

Thanks for the video, I needed to find the spare dismount mechanism! Hell yeah great comment, I also love my E250 too!

[@lorenzohart9560]

If anyone looses their tool, you can use a 2ft 3/8 extension and it works like a charm

[@hcbmoz]

do you need to remove the slot inside first? or will it fit

[@lorenzohart9560]

@@hcbmoz i didnt have to

[@AlwaysBored123]

Thanks for the video. I thought that was the hole for the crank but I never would have figured out why that idiotic blocking plate was in the way.

[@dragonrider2.064]

The phrase: I love my van is a little suspicious hahha but thanks for the help

[@1life2pono]

thank you for posting this!

[@chadcleary7931]

Great video. Thanks!!

[@RutherfordNJDrywallRepair]

Thanks needed this!!! My van came with missing spare removal tool. I to LOVE my E250 . Incredible powerful Vans. Thank again 😊

[@maxwellhouseranch1004]

Glad to hear the video helped.

[@maxwellhouseranch1004]

Glad to hear the video helped.

[@where2then]

Great video. I'm curious how you mounted that bench seat, been thinking of doing the same things at some point.

[@vnle]

Thank you for the video. I didn't know how to remove the metal piece blocking the access hole.

[@jmc4766]

Exactly what I needed thank you. 🤘

[@maxwellhouseranch1004]

Glad this helped.

[@kennethbass1156]

Thank you 👍🏾

[@maxwellhouseranch1004]

Your welcome

[@trev777]

Great video.

[@gtgl2x]

Saved me again!

[@tulippuga7351]

Hey great video! What’s the other end of the tool used for?

[@Auriam]

Thanks so much for making this video. I have an old e250 i inherited from my last job and needed to figure out how the mechanism worked.

[@samiamLatina]

F.y.i this videos just helped us out!!! Thank you!!!

[@maxwellhouseranch1004]

Awesome, I'm glad this video helped you out.

[@gabrielbenitez7309]

Thank you so much

[@maxwellhouseranch1004]

Your welcome, if you like my videos please consider subscribing. Thank you

[@KETCHUPKING]

great info man good to know thanks

[@maxwellhouseranch1004]

Thanks for the comment.

[@himerleiva3253]

Very helpful thanks

[@maxwellhouseranch1004]

Your welcome.

[@foghorn3]

wouldn't of ever figured it out? Learning every day 🚚🐒

[@POLOAZTECA]

Was trying to see what kind of tip U had. I don't have the original and im trying to use a Ram or a Colorado. Didn't work.

[@samzimmerman359]

Love my e350, although they really designed some garbage door latches all around 😂 they are the worst

[@maxwellhouseranch1004]

Agreed

[@ryker6richard]

WOW, COOL.

[@DavidBrooksNYC]

Ty, I have a bit more rust than you all but I think I can get to it,

[@nukingjapanwasok6265]

1:04 The screw that holds in the block is made of plastic. So one of the two grips on top of the screw broke off, meaning I couldn't unscrew it with the tool

[@twodogs3868]

We need to know what the end of the tool looks like because many of us are missing ours

[@maxwellhouseranch1004]

Looks like a flathead screwdriver

[@fabriziocaputo6542]

@@maxwellhouseranch1004 hi, like a regular straight flat head? What size? Thank you

[@SkyWalker210]

@@fabriziocaputo6542 I believe it’s sort of bent at the end

[@WTFIsThisGuyDoing233]

Got it. So I'll do this exactly once and then the spare will live in the cargo area because everything is rusted out.

[@lorenzohart9560]

Great van until you have to remove the axle just to replace the parking brakes🥴

[@kleingreenlee7006]

Thxs!!

[@maxwellhouseranch1004]

Im going to make another video for thus with my son holding the video camera. I was filming this by myself and that's why the quality is so bad. Hope this helped.

[@teezy122]

Can a pallet or two fit ? Like load wise

[@maxwellhouseranch1004]

Absolutely

[@oneplanetjunkhaulingllc9067]

What type of tool do you use to stick in there

[@maxwellhouseranch1004]

Its the lowering tool that comes with the jack system

[@oneplanetjunkhaulingllc9067]

@@maxwellhouseranch1004 thank you, and thank you for that video. Bless.

[@MarkCranerium]

I feel seasick

[@maxwellhouseranch1004]

Then get off the boat. Lol