How to: maintain your Fox rear shock

[@Synonomous]

Great explanations. Love the English. Detailed, well spoken, accurate. I have an old coil spring Fox Vanilla R but will use the bushing technique. Thanks.

[@carpediem19999]

when you put the shock back together if you hold the schrader valve in to release the air the shock will meet the thread easier with less force.

[@bobcatt2294]

Well produced instructional videos - thank you.

[@ABritInNY]

what a great video, quick and concise instructions for servicing my fox float rp23 kashima, time to order that service kit now I guess, thanks.

[@danielharding1998]

I found watching this video funny because I have a hard tail but I still watched it :)

[@symanoy]

If you have an XV larger air can and you keep bottoming out you can also just buy a volume spacer kit which reduces the volume and so ramps up the spring rate as it compresses. It's a lot cheaper than a new air can!

[@femd8810]

Excellent video, thank you.

[@symanoy]

the float fluid lubricates the seals and the shock.

[@lettucemedia8023]

Simon Leighton i

[@JUNJUN-lw2vr]

Do you have video on fox 34 professional maintenance? Great video

[@PlanetMety]

very clear how to video.could you do a rear shock maintainance on a manitou radium? thanks.

[@ivansotof]

Really good video.. Thanks!

[@GNX157]

So where does the oil damping take place? Is there a more inner part of the shock that only a service center works on? Here I was under the impression that the oil film I saw on the externally visible shock shaft was actually shock oil but apparently it's only the fox lubricant fluid?

[@Yradex]

Great video, thank you!

[@g5magic]

Can you show how to replace the rear shock. ? Or installation of rear shock.

[@CyberRican]

So what's the fox oil for? Is there any special way to replenish that? Which we didn't see?

[@pgupta5826]

Hi there, that's a lovely video...I have a new Cube Stereo 160 with the Rockshox Monarch RT DebonAir rear shock...this shock has oil seepage and the bike shop refers to it as shock sweat and normal...personally, I am not convinced as oil is supposed to stay IN the shock and there is a fault with the shock...but hoping to get your expert opinion, please help!

[@richpotatothebestg.m.ovegg2599]

Bhupinder Kumar shut up and ride your bike

[@arneleppelsack6762]

Very good video. Thanks for that. I have problems openng mine. and well I am from Germany and wasn't able to understand the tool name of the yellow stripe thingy properly to translate it on the internet. So how's it called? :) Thanks

[@kendavis8647]

Arne Leppelsack Band Wrench, Strap Wrench

[@MrSmythie23]

Can the lock out screw be replaced?

[@fossil98]

Dumb question but why would you do this instead of just raising the air pressure if you want less travel?

[@raikanu9497]

is there any video u ve got which explain about adjusting knot.actaully i took it all off and no facin problem for fittin it bak.do u' have any idea abt it

[@careditor]

Good video! Cheers

[@cbarbosa007]

hi im overseas, and i need to fix my fox Shox Float RL. i believe its a 2010/11 model. I found it has a broken screw for adjusting the rebound and lock mecanism, and also itś leaking from the rebound adjuster chamber. what should i do?

[@dakitofey171]

he knows you're supposed to put the touch of grey on his beard too

[@danielforto]

How to fix the lockout switch that is not working?

[@scotty-sb1403]

Daniel Forto did you ever find the answer? My 2014 ctd won’t lock out at all

[@dadodado8423]

Where can i buy new spacers

[@vinanderson2535]

*MAGIC*..watch that Fox turn into a CC.

[@mateuszk9696]

i made all like that and my climb option is no longer working :(

[@Weepee587]

How to remove and install rear shock on my trek remedy 9.8 2017?

[@mortadhaabdul565]

Bravo November just remove the screws that hold the rear shock. If you can't go to a dealer or mtb store!

[@MiniCooper00001]

Music at beginning and end?

[@simonking8328]

COOL THANK FOR THAT

[@Rudywtf]

so i just did this, worked perfectly. but i noticed before i took my triad ii apart the can wasn't screwed all the way on. and after i did this service it didn't hold air being screwed all the way on. i backed the can out and it holds air, anyone have any ideas?

[@ciaorobban7579]

Rudywtf i have no experience with this. Did you ever solve it?

[@XFOX1996]

you did not show us the right amount of air to full the shock with. and thats why i'm here :(

[@Maxiking263]

that depends on your body weight

[@XFOX1996]

50 - 300 pci

[@geraldhenrickson7472]

+XFOX1996 Thats sag. Other videos address the amount of sag for your weight with gear...

[@claudiusliberalis8374]

mmh lecker, dreck am gewinde, traspelt die eloxalschicht weg - schon rein akustisch wahrnehmbar - wie unproffesionel :o/