How To Make A 2 Stroke Exhaust Pipe Look Incredible!

  Рет қаралды 427,164

Cameron Niemela

Cameron Niemela

Күн бұрын

Пікірлер: 581
@CameronNiemela
@CameronNiemela 6 жыл бұрын
Who likes raw 2 stroke pipes?
@nevinpoling8003
@nevinpoling8003 6 жыл бұрын
Me
@thefrenchiestfry5495
@thefrenchiestfry5495 6 жыл бұрын
I like exhausts black and bluing raw.
@magik7800
@magik7800 6 жыл бұрын
Love your work men. Looks awesome.
@scottmccourt1460
@scottmccourt1460 6 жыл бұрын
Me
@scottmccourt1460
@scottmccourt1460 6 жыл бұрын
It kinda looks like to pro circuit works pipe
@soxh8ter
@soxh8ter 3 жыл бұрын
Bad welds but I held on to my chair for a second because of the beautiful initial color of the pipe. Very nice work and fantastic job bringing back that works pipe look. Absolutely love it!
@supermototrolls7344
@supermototrolls7344 6 жыл бұрын
There are some sweet rebuilds/restoration videos on youtube. But then there is this guy, Cameron Niemela, on another level. Amazing job! Keep it up!
@joski9030
@joski9030 6 жыл бұрын
He’s definitely good at what he does and his attention to detail is up there, check out “G9 Garage” on here he’s currently doing an RM 250 restoration and it’s hands down the best I’ve ever watched.
@supermototrolls7344
@supermototrolls7344 6 жыл бұрын
Jo Ski Haha i just watched all g9garage videos of the rm 250 restoration yesterday. Both channels are amazing! If you know any similiar channels Please let me know. Thx :)
@jaydenshook6780
@jaydenshook6780 6 жыл бұрын
Never thought just that little bit would change a lot but just that will make the bike stand out can’t wait to see the next build video
@Kylefadness
@Kylefadness 6 жыл бұрын
Just watched this entire build so far in like 4 days. Not only did I learn a ton, i could also learn to stay calm when theres a hiccup in the project like him. I could feel my anxiety when he had to split the case again hah. This is my dream project, only thing standing in my way is 3 verrrry expensive kids
@threefiddyone
@threefiddyone 6 жыл бұрын
The Pro Circuit silencers are the best looking ones out there! And Id love a nice cone pipe like that. The raw pipes look amazing. Just sucks that they rust when they get within 10 feet from water.
@mattymccolgan9453
@mattymccolgan9453 6 жыл бұрын
Love ya vids mate, unfortunately a lady went through a red light while I was enjoying a night ride and I ended up with spinal injury which put me out of work and over time I've had to sell my beloved bikes... But vids like yours keep my life passion strong (motorcycles)... Cannot wait for my lumbar discectomy to stop the pain so I can go back to work and GET BACK ON A BIKE... And use some techniques I've learned from your vids when problems arise... Keep it up mate from AUSTRALIA
@seans7794
@seans7794 6 жыл бұрын
Matty Mccolgan , Good luck with your discectomy and recovery bro. I had the same thing on my L5-s1 level.
@mattymccolgan9453
@mattymccolgan9453 6 жыл бұрын
Thanks sean s mine is from L1-L3.. it will be the 2nd attempt.. 1st operation worked amazing as I couldn't walk before it, but my job involved constantly lifting and aftee few year's it failed.. surgeon is confident he can get me back to work so I just have to wait on the public health system to take me in, hopefully soon
@brockcr855
@brockcr855 6 жыл бұрын
Hey cameron heard about the news the other day was so sad to hear but im praying that you get through fine and keep doing what you love
@steviecee898
@steviecee898 3 жыл бұрын
I've used a good few of your tricks mate and this one is a definite this is going to be the weekend project thanks for the videos mate keep them coming 👍
@dh1270
@dh1270 6 жыл бұрын
Looks cool as hell. If you want thinner on the bluing try using an acetylene setup. Turbo torch kit with a small A 5 tip.
@jannievanniekerk6290
@jannievanniekerk6290 6 жыл бұрын
That pipe looks prime. When you doing plastics, would like to see polisport restyle kit on it. I’m getting so eager to see the bike complete. Keep up the good work Cameron.
@paulmader1052
@paulmader1052 6 жыл бұрын
Your getting better at your videos you don't seem as nervous as much keep up the great work.
@rickfeith6372
@rickfeith6372 6 жыл бұрын
Can't WAIT to see the ole 250 back to better than new!! Its gonna be the nicest older Honda around.
@johnh1001
@johnh1001 3 жыл бұрын
To improve the pipes appearance, another method that I saw used was cold water sand blasting . The water was so cold , just to take a little drink of it would make your teeth ache . They then filled the tank on the blast cabinet and poured in the sand and sprayed that pipe all over . That certainly gave the pipe a nice bright clean look . Nice video you made .
@kellyhill430
@kellyhill430 5 жыл бұрын
Dude you are an amazing builder/mechanic/artist. That pipe looks so trick!!
@rhysharvey3152
@rhysharvey3152 6 жыл бұрын
Get well soon cameron iv been watching for a minute now and i hope you get better keep fighting bro!!!!
@deurlii7920
@deurlii7920 5 жыл бұрын
If you love 2 strokes, you should come to the Netherlands, there is a huge 2-stroke moped/scooter tuning scene. Nothing is more fun than getting almost double performance from just a new cilinder!
@chrisarmstrong7678
@chrisarmstrong7678 6 жыл бұрын
Looking mint, can’t wait to see how the bike comes together!
@scotiousnevious9038
@scotiousnevious9038 6 жыл бұрын
Metal coloring was part of my welding class. It's patience, you can get some really nice color. Even better is nice consistent color, I'm no pro but they get extremely good.
@markssmallengines3542
@markssmallengines3542 6 жыл бұрын
Scotious Nevious when you colour the metal like this will it fade away over time from the heat of the exhaust gas's? I was thinking of doing mine 😁
@nathanduff7252
@nathanduff7252 6 жыл бұрын
9:33 ......When you see a moto chick
@dustyclark2825
@dustyclark2825 4 жыл бұрын
Same with 11:35
@lilpebble6975
@lilpebble6975 3 жыл бұрын
@@dustyclark2825 wut
@mxrider2strokebraaap54
@mxrider2strokebraaap54 6 жыл бұрын
Great video as always! The pipe looks so good😍 You got a lot of Dutch fans out here🇳🇱
@robin6444
@robin6444 6 жыл бұрын
Mxrider2stroke Braaap zeker ook veel in het noorden van ons kikkerlandje
@jarnoterpstra7290
@jarnoterpstra7290 6 жыл бұрын
Friesland😜
@johndeere8724
@johndeere8724 6 жыл бұрын
Mop mop gas dr op 💪🏻🇱🇺
@jmb6587
@jmb6587 6 жыл бұрын
I am never going to rebuild a bike . But i absolutely loved these videos. Cameron you are very impressive.
@zackmiller1165
@zackmiller1165 6 жыл бұрын
Well that's pretty slick. Gonna miss these build videos when your all done.
@CameronNiemela
@CameronNiemela 6 жыл бұрын
Oh there's lots more builds coming haha
@owenarsenault5955
@owenarsenault5955 6 жыл бұрын
I really like how you spent more time than money making the Custom look you are after. 👌
@552Freefall
@552Freefall 6 жыл бұрын
Good idea! You've given me a lot of project ideas for this winter with your channel.
@maxximillienberard162
@maxximillienberard162 6 жыл бұрын
Underrated channel! nice work!
@erickwelke6457
@erickwelke6457 3 жыл бұрын
I like all yourVideos I always watch them sometimes I watch them again and again your awesome keep up the good work Erick
@lorollinls
@lorollinls 6 жыл бұрын
You did a great job with this! Those portable torches really spread the flame out too much for this. A nice oxy-acetylene rig will enable you to finer tune the flame to focus on a very precise area. Give it a shot some time! 😉
@StilwellMotovlogger
@StilwellMotovlogger 6 жыл бұрын
2:10 is that a beautiful kx500 just sitting in the corner?
@glahut93
@glahut93 6 жыл бұрын
Please stay strong and get well Cameron, you're a good guy
@wrongmark
@wrongmark 6 жыл бұрын
Can’t wait to see the CR250 finished
@jackwormald6379
@jackwormald6379 6 жыл бұрын
need to hurry up with this build its going to look insane can not wait!
@fistpounders7375
@fistpounders7375 6 жыл бұрын
Can’t wait to see the cr250 all back together and ready to hit the track 😍
@kadenlynch6991
@kadenlynch6991 6 жыл бұрын
He still is doing things for the bike awesome
@larsonszulc7716
@larsonszulc7716 2 жыл бұрын
Mine has a grayish tint is there any way I could make it chrome? Love the vids btw congrats on your recovery.
@thomasnaylor7143
@thomasnaylor7143 6 жыл бұрын
Can’t wait to here that exhaust roar. Love your vid man.
@Gmoney444A
@Gmoney444A 6 жыл бұрын
Hey man you have really helped me out a lot you are a great guy man all my prayers go out to you through this journey get better!
@BosephusBigelsworth
@BosephusBigelsworth 5 жыл бұрын
Damn, that pipe looks fantastic! Thanks for the tutorial Cameron.
@aleksitjvladica.
@aleksitjvladica. 3 жыл бұрын
KZbin gave Me this instead of Rambo and Rocky I searched for. Ended up watching the whole thing. Very nice video and pipe.
@xjlover2058
@xjlover2058 6 жыл бұрын
Glad your build is going well. I had a big ride planned tomorrow and went to put a new rear tire on and noticed a big crack all the way through my rim... Pretty shitty deal and I can't ride tomorrow so im pissed....
@jacystone5011
@jacystone5011 6 жыл бұрын
That sucks
@CamRSaws
@CamRSaws 6 жыл бұрын
That exhaust system looks so sick! Nice job
@restoredmoto1645
@restoredmoto1645 6 жыл бұрын
I see that kx500!! Love the videos Cameron! Really hoping you pull through the cancer too, my man! Beautiful pipe work by the way!
@onewheelwayliam7544
@onewheelwayliam7544 6 жыл бұрын
i loved this video, raw footage of u working on a raw pipe, the cursing was funny asf
@diggs7252
@diggs7252 6 жыл бұрын
WOW is right! Amazing work and IMPRESSIVE as always.
@camronarmstrong6759
@camronarmstrong6759 6 жыл бұрын
Glad to see another vid on the cr250. Hope i can seen more really soon
@gersonholanda879
@gersonholanda879 6 жыл бұрын
Can't wait to see this bike all mounted up
@lucaseduardo6211
@lucaseduardo6211 6 жыл бұрын
Hey Cameron. I watch you from Brazil. I'm your fan 🤙🤙👊
@jonwayne1276
@jonwayne1276 6 жыл бұрын
gordela motos are you an off duty cop?
@nickhandcock7515
@nickhandcock7515 6 жыл бұрын
Bro, every one of your videos are sick as. Keep that shit up!!!
@Shaipnoypogi
@Shaipnoypogi 3 жыл бұрын
That chamber is awesome bro
@micahcasa1696
@micahcasa1696 6 жыл бұрын
Can’t wait till it’s done 🤘🏼🤘🏼
@sako4me
@sako4me 6 жыл бұрын
You should have clear coated it with VHT high temp clear coat, done it many times. Keeps the rust away and makes it easier to clean.
@IntoTheMystery13
@IntoTheMystery13 6 жыл бұрын
That is SO SICK DUUUUUUUDDEEEE! Nice work man
@aapeli626
@aapeli626 6 жыл бұрын
I love these cr250 build videos!
@noControl556
@noControl556 6 жыл бұрын
Music goes great with the polish wheel
@benjaminvarcoe4819
@benjaminvarcoe4819 6 жыл бұрын
Looks sick Cameron. I did a similar thing to my pro circuit exhaust on the exhaust tip but I just made my one a light brown colour and it looks great
@markssmallengines3542
@markssmallengines3542 6 жыл бұрын
Wow you really made that chamber look awesome Cam 😁 i can't belive you accepted that welding though I'm never negative but them welds are pretty rough an should never have to be ground down imo. Hopefully the builder watches your vid and dose the same thing to make their new pipes pop. I love your vids so professionally done. Take care Mark.
@alanair7019
@alanair7019 6 жыл бұрын
Mark Dillon someone just couldnt resist. Lol as long as there are no leaks and the weld holds its own then it dont matter. In the end whos gonna know some anal retentive bung hole like me then you got no worries
@2WheelWild
@2WheelWild 6 жыл бұрын
As a custom exhaust fabricator, TIG welding stainless and titanium, the welds should be enough color if done properly. Plus shouldn’t rust because it’s 304 stainless. Plus those pie cuts look garbage. Should never have that wide of a pie cut to where it has over 2.5 in of flat. Idk...people that don’t know much about custom fabrication and proper welds would think that exhaust looks good.
@Yelwas
@Yelwas 6 жыл бұрын
anything custom the welds have to be effective but also looks is important, probably more so....
@Bicifaidate
@Bicifaidate 3 жыл бұрын
Beautiful!
@RNDOMV
@RNDOMV 6 жыл бұрын
That looks pretty good bro! 2 Stroke4Ever!
@MichaelJohnson-xu7oq
@MichaelJohnson-xu7oq 6 жыл бұрын
Dude! Loved the video! Cant wait to see your bike buttoned up ! ( cant say finished cuz on a bike were pretty much never finished with putting mods😉) Awesome to see those bloopers 😊 Keep it up man love it 👍💯
@XtremeProject1
@XtremeProject1 6 жыл бұрын
Cameron AMAZING WORK DUDE Greece form Austria
@carlcolorado3549
@carlcolorado3549 6 жыл бұрын
Can't wait to see this bike!
@ssbbmoto
@ssbbmoto 6 жыл бұрын
Try a jewelers torch tip and go faster for a narrow heat effected zone, slow down to widen it out. Your videos are great, you do the moto world a great education.
@joaodfilipe17
@joaodfilipe17 6 жыл бұрын
Awesome video and awesome work. What material is that exhaust made of exactly? Stainless stell, aluminium, titanium?
@AryanM3
@AryanM3 6 жыл бұрын
Frickin wicked man, I want to do my FMF like that
@MotoMarv-Micahboy
@MotoMarv-Micahboy 6 жыл бұрын
This bike when done is going to worth $52,000!!! you have to brand your name in the frame man cause whenever, if ever you sell it (20 years from now) man will be a sad but epic day....
@NzJohny
@NzJohny 6 жыл бұрын
Get well soon mate. That pipe looks sweet! Oh i forgot to mention. I have been around since tech lessons ;)
@BuffsVintageBikes
@BuffsVintageBikes 6 жыл бұрын
That came out looking so trick 👌🏼
@Thundercat68
@Thundercat68 6 жыл бұрын
Pipe look fantastic! Nice work.
@athomerecordschannel
@athomerecordschannel 6 жыл бұрын
It is crazy how different people have totally different taste. I actually liked the Pipe and the Silencer both before. I also thought that you would grind round the pipe mount and add a few extra welds on it or complete the welds.
@AngelGarcia_420
@AngelGarcia_420 6 жыл бұрын
wooooww . . . I did not expect that. great job man. thanks for showing us all your tips for a trick bike
@aaa77233
@aaa77233 6 жыл бұрын
He could basically be a factory mechanic, like if you agree. These videos are so awesome!
@alanair7019
@alanair7019 6 жыл бұрын
Ride with Adam mate Cams way better that a factory trained know all. They suck.
@bikepackers
@bikepackers 6 жыл бұрын
The heatmarks looked nice
@worksafe3441
@worksafe3441 6 жыл бұрын
I did a treatment on the header for my race car but used the natural engine heat to add back the color. Buy your vodka of choice. Wear clean rubber gloves and christen your new header with a nice vodka wash. Make sure not to get any dirt/oil/etc on it when installed. Use the natural heat from the engine and the thing will come out a smooth gold color all the way throughout!
@eetukorhone
@eetukorhone 6 жыл бұрын
Just amazing😍
@stevencuberosoto1756
@stevencuberosoto1756 6 жыл бұрын
I gotta do this...great job Cameroon 👌👌
@MemeRider
@MemeRider 6 жыл бұрын
All your videos are amazing. I don't know what I'd do if you weren't here/left KZbin. I'm striving to make my YT channel to be like yours in some way
@claussgarage7162
@claussgarage7162 6 жыл бұрын
no words. amazing work
@JJsiahMoto
@JJsiahMoto 6 жыл бұрын
I honestly just love your videos dude! Keep it up
@x0kuu
@x0kuu 6 жыл бұрын
Looks way better than before
@acefreely3556
@acefreely3556 6 жыл бұрын
Worst welds I’ve seen in a long time. What the hell?
@fireplayscsgo9848
@fireplayscsgo9848 6 жыл бұрын
Ikr it looks so bad do you know other companies than scalvine that do cone pipes ?
@Jhuttn
@Jhuttn 6 жыл бұрын
I'd be surprised if it doesn't leak
@glennholtzapffel2397
@glennholtzapffel2397 6 жыл бұрын
i agree no wonder they where grinded
@Farlig69
@Farlig69 6 жыл бұрын
Yep sorry but whoever welded those is an amateur welder, disgraceful for a "pro" bought pipe...
@AverageCitizen333
@AverageCitizen333 6 жыл бұрын
thats the first thing i thought. must have gotten that pipe after the high school vo-tech welders got job placement
@finnstanley8827
@finnstanley8827 5 жыл бұрын
i love the stripes u put on the header
@otpipe
@otpipe 6 жыл бұрын
Like someone else said maybe a narrower flame like a acetylene torch. Hotter flame but more concentrated. Also so since heat rises maybe hold the seams verticle and go up and around. Great look.
@kawasakiklx250
@kawasakiklx250 6 жыл бұрын
Gracias por traducir el video al español. Muy buen look quedo terminado el escape. Saludos.
@marianflimel318
@marianflimel318 6 жыл бұрын
Get cycra plastics for your Honda please, amazing build
@Vini-rm2ss
@Vini-rm2ss 6 жыл бұрын
Hello Cameron ! Waw verry nice pipe ! Idem scalvini, fresco, pps and jollymoto ! For the verry nice perf, verry nice sound and INCREDIBLE look !!! 😉 ! Verry nice week-end for you ! 😉 💨 💨 💨
@dankster722
@dankster722 6 жыл бұрын
You should make a blooper video of all the little slip ups and fails you've had over the years
@backwithabang5842
@backwithabang5842 3 жыл бұрын
Exactly my yz250 Set up..dpr pipe with PC silencer. :)
@ProMotoo
@ProMotoo 6 жыл бұрын
Hey Cameron. For the silicone tube i have a trick. When you are Done with it screw in a Wood screw that fits snug in the hole just about a centimeter in.
@aaronanderson7619
@aaronanderson7619 5 жыл бұрын
Or use a wirenut.
@timmwhite9218
@timmwhite9218 6 жыл бұрын
...look, it's Johnny O'Mara!! Nice job on the pipe, looks 'works' now. Haven't found that Maxima MMPL yet...
@elevatorguyxx1179
@elevatorguyxx1179 6 жыл бұрын
Good job looks legit
@cultonmotocrossracing3408
@cultonmotocrossracing3408 6 жыл бұрын
This is a really good channel
@1E11evenMoto
@1E11evenMoto 4 жыл бұрын
That pipe is straight fireee 🔥
@alexraut31
@alexraut31 6 жыл бұрын
You make so good high quality content. Keep it up!
@harmmx2923
@harmmx2923 6 жыл бұрын
WHAAA Netherlands! Love to my country! Really nice exhaust!!
@carlo8999
@carlo8999 6 жыл бұрын
HarmMX fakka strijder
@Schetser258
@Schetser258 6 жыл бұрын
strijdersssssssss
@gewoongwin5120
@gewoongwin5120 6 жыл бұрын
Haha strijders
@drunksanta1427
@drunksanta1427 6 жыл бұрын
strijdersss
@cowfighter1512
@cowfighter1512 6 жыл бұрын
🇳🇱love too you from the Netherlands🇳🇱
@iamadness69
@iamadness69 6 жыл бұрын
I think there are high temperature clear coats you could use to protect your pipe from rusting and seal the colors in while giving it a shiny look.
@don7406
@don7406 6 жыл бұрын
Sort of looks like a Scavini (sp?) pipe. Are you considering placing any plateing for dent protection? Thanks for sharing.
@jaredmuszynski8996
@jaredmuszynski8996 6 жыл бұрын
Just did this to my shorty looks amazing 😍😍😍 if I were to clean it with the scotch bright pad or aluminum polish will it fad/come off ?
@jasonyz2504
@jasonyz2504 6 жыл бұрын
Hell yeah. That looks great
@madmikster85
@madmikster85 6 жыл бұрын
And when you're heating for color in metal, heat the metal all around slowly and evenly, the metal will slowly turn into a gold/haze then starts working into blue/ purple allows for alot better control of the color distortion
Can This 2 Stroke Pipe Be Fixed? | RM250 Rebuild 30
27:01
Cameron Niemela
Рет қаралды 42 М.
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
Try Not To Laugh 😅 the Best of BoxtoxTv 👌
00:18
boxtoxtv
Рет қаралды 6 МЛН
🕊️Valera🕊️
00:34
DO$HIK
Рет қаралды 17 МЛН
How to make a muffler // Paul Brodie's Shop
15:58
paul brodie
Рет қаралды 95 М.
Two Stroke 3,5 HP to 28 HP in 7 minutes
7:04
LangTuning - Feinstes Simsontuning seit 1994
Рет қаралды 246 М.
This Part Doubles Power in a Two Stroke!
17:14
2STROKE STUFFING
Рет қаралды 492 М.
Unbelievable Restoration of a Destroyed 2 Stroke Pipe!
9:14
Kincade Pavich
Рет қаралды 39 М.
🔥 Stunning 2-Stroke Engine Rebuild & Restoration | 1996 RM250
19:13
How to bend exhaust pipe using fine sand | @homecreativeworks
11:45
HomeCreativeWorks
Рет қаралды 118 М.
I Made a Two-Stroke Engine Using Things I Found at the Hardware Store
19:51
The Best Way To Make An Engine Look Amazing!
14:33
Cameron Niemela
Рет қаралды 765 М.
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18