How to Make a Backyard Wrestling Ring Part 2

[@weaselsuit]

Really nice, well thought out design. those metal brackets make me nervous a little bit. I also didn't see whether you Sawzalled off the eye bolt excess. You don't want those sticking out.

[@dansretrogamingandwrestling]

those metal brackets are hurricane braces for a house, they won't be going anywhere for a while, we didn't saw off the eyebolts on the back as we are only using the post temporally, until we have the money for steel.

[@tbj25]

It sounded like a real ring. Good job both of u

[@dansretrogamingandwrestling]

thank you

[@MrMattyMoses]

nice video and great job explaining what you were doing and why :)

[@elvis71717]

I thinking of this, how about in the middle of the two sides that hold up the 2x6s. to use a 4x6 hanger that can hold two 2x6s so the plywood can have more to lay on and one less 2x6 to buy. just a thought that i'm going with. whats your thought on this question?

[@ser_wrestling2764]

hey where are you guys located could we practice on your ring ? we don't have one. we're gonna build one in a year but we need to practice.

[@dansretrogamingandwrestling]

there not in the ground, thats what the strap is for, its the same as on a pro ring the strap takes the pressure so the post will not move no need to put in the ground

[@HarrisArtsCinema]

Do you have an idea on how to modify this method for a 6 sided ring or possibly an 8 sided ring?

[@e2motorsports]

Would the screws not stay in place if I were to keep unscrewing them every time we get done with a show?

[@christinac.754]

Cool ring,how long did this take

[@ethanwalker4229]

where are you located at I can wrestle for you

[@yusuftaha7121]

How far does the beams need to be from eachother

[@Madmaximillion57]

I was gonna make one in my basement... Was going to use canvas drop cloth (thick ones) and not a tarp.. Also how soft is it, like to slam on it, pain wise? I was gonna fill mine (before putting on the big plywood sheets) with old tires. Also why not cover the posts/rope in some kind of foam? Would what I'm thinking a good idea? I want to be able to slam hard without thinking twice.

[@dansretrogamingandwrestling]

it would work fine we used a tire ring setup previously and it did fine you will need to adjust your tires ever so often as they will move around

[@danachristie110]

@@dansretrogamingandwrestling i like watching your videos, but in all seriousness, the rings with the wooden floor supports on edge like yours are phased out of show use for a reason, yes they had their time and place, mostly because they were cheap to make, and the guys wern't bumping as much in those days. i am a ring builder, and i also make wooden framed rings as they take a lot of abuse and are easy to replace, but the floor beam supports are all steel. so are the posts. not trying to knock you guys i'm really not i started out by building a ring similar to yours, so i know where your coming from, but these days its all about safety

[@dansretrogamingandwrestling]

2 one going from corner to corner, so all for post has a strap connected making an x in the middle

[@ΑνδρέαςΧρόνης-τ7ψ]

How much it dit costed you guys?You know to take the materials.

[@gowwe12]

You said yours is not cemented in, what do we do if the corners aren't even? (different hights)

[@elvis71717]

Just to ask, can you use three 2x4 that are four feet apart that's under the 2x6? because i seen a ring setup that had three tubes going one way of the ring & 7 tubes going across them. p.s i might make my own wrestling ring thx to your part1, part2 & part3 videos

[@dansretrogamingandwrestling]

I'm sure you could but it wouldn't be very coast effective, as the extra mounting brackets would largely increase the price

[@dansretrogamingandwrestling]

try to leavle the dirt out or shave some of the post to make it level if its not going to be moved

[@monicasandoval5127]

Daniel Strouth really want you to come to my house and build one for me I am

[@monicasandoval5127]

obsessed with wwe

[@mr.ronaldmason7967]

I love it but did you get the entrance or no

[@dansretrogamingandwrestling]

no i actually moved shortly after and no longer have room

[@youngdeezy64]

One question, in all seriousness, how much would you charge to build a wrestling ring?

[@dansretrogamingandwrestling]

Cordell Hall you buy all parts and around 350 labor

[@youngdeezy64]

Alright good to know, we'll keep in touch in the near future

[@elle160478]

How did u keep the ring post in place

[@TheXxViciousxXTruth]

How deep are your ringposts in the ground?

[@dansretrogamingandwrestling]

Yes anything from 1/4-1/2x4x8

[@MultiJJ1234]

Did you use two hand straps or one?

[@michaelsorrells4649]

Wrestling ring made of steel

[@fcweprowrestling2054]

Is there any possible way to make a ring portable with out digging holes in the ground

[@dansretrogamingandwrestling]

FCWE Pro Wrestling this ring isn't dug in the ground its, completely portable and can be setup inside of gyms

[@fcweprowrestling2054]

Thank you

[@krisreigns9890]

do you still need wrestlers?

[@chadwickhughes4441]

How much did it all cost

[@levicollins3741]

Still looking for wrestlers

[@wildandwackywade]

How do you make this so its portable?

[@Titan-gs6cf]

You buy a few gym mats and just throw them on the ground wherever you go, problem solved...

[@FlawlessFrancisco]

gatorgaming11 u could still get badly hurt.....

[@wildandwackywade]

without proper training like Super said injuries can occur. We used to do that for a martial arts school when we did training at the park while the main teacher was on vacation. It was a cool way to advertise

[@Glasssplinters]

Dude! It all looks good except your shaking hand! Hold the camera steady of give it to someone else!

[@jerrymorganjr]

How's it held up?

[@dansretrogamingandwrestling]

the ring is still standing in my ex wife's yard, so it held up better than my marriage lol

[@Gawd_Damnit_Danny]

About how much did it cost for all of the material that you used to make this ring?

[@sandywilson7991]

Kraków 1000 it would be 1 to 98 hours

[@thebasher4364]

Can wooden rings have metal beams

[@danachristie110]

yes they can and its very easy to do

[@Gio1.]

how much money was it

[@sandywilson7991]

I'm the best at that

[@stepbackwitdeesause1884]

+Sandy Wilson oooooohhhhhhhhhhhhhh

[@wwefan9346]

+Cordell Hall how wide is it in feet like 12 feet wide

[@dansretrogamingandwrestling]

16

[@thelotuschild698]

I'd suggest more padding. WWE uses more padding but put a microphone under the ring

[@dansretrogamingandwrestling]

yeah an extra layer or some closed cell foam would greatly reduce the impact

[@danachristie110]

wwe hasen't mic'd the ring since the early 2000's

[@dansretrogamingandwrestling]

around $1000, less if you use nylon rope instead of cable

[@jeremy__9758]

How long did this take

[@dansretrogamingandwrestling]

we was able to build it in around 2 days. after the initial build it can be taken down and put back up in a few hrs

[@GAPSGraham]

How much did this all cost in total?

[@dansretrogamingandwrestling]

about 1,000 but realistically around 800, we screwed up a few times

[@llamaboy9239]

Dude I super placed on it and it exploded

[@mr.ronaldmason7967]

Good job 🤤

[@ramansmith9007]

I really want a wwe ring

[@dansretrogamingandwrestling]

1/2

[@Ben-jw2ho]

How

[@deonhurn5393]

Do u need wrestlers

[@dansretrogamingandwrestling]

deon hurn yes where are you located

[@dansretrogamingandwrestling]

loacation?

[@deonhurn5393]

wats a lumber

[@dansretrogamingandwrestling]

yes 2x30

[@hnremak]

I see London, I see France 3:24

[@thelifeofbrdley7068]

hi

[@williamgriffin8436]

Really they had to use carpet instead of foam woooow

[@jdt19]

I saw your boxers haha

[@Theorcman2008]

Why is your ring not spring loaded??? I know wwe uses a leaf spring system and it helps with bumps and stuff.......? are you trying to hurt yourself?

[@dansretrogamingandwrestling]

Theorcman2008 wwe no longer uses spring rings rather a Flexbeam style ring that is just steel tubes. And If you check any major ring manufacturer it's been this way for years.

[@Theorcman2008]

Daniel Strouth I just saw the video from WWE that was posted on youtube looked like flexing leaf springs not "tubes" anyway your ring doesnt seem to have alot of give to it maybe you got to be there.

[@TheJGEdits]

Daniel Strouth Hey, how much, excluding the ropes did this whole thing cost? &did you put the posts into the ground?

[@winstonjordan9708]

The spring is obsolete. They use flex beams

[@danachristie110]

wwe hasent used a spring loaded ring since 1998 they switched it out because ppl were getting hurt, and vince had also started wrestling and they switched to a softer ring for him

[@skylerjenkins159]

I'm jealous

[@wildandwackywade]

I agree that ring looks better then the indy one we use.

[@MasDouc]

Stop saying "so...".

[@lucasbradley1043]

Ho

[@risasconsergio7438]

spikin spanich

[@egorbiletskiy2950]

There are many similar projects in Woodprix's plans.

[@bewbackyardwrestling3078]

where are ya'll located send me a personal message

[@dansretrogamingandwrestling]

we are located in falls mills va

[@dansretrogamingandwrestling]

Part 3 will be uploaded in the next 2-3 days, waiting on a clear day to film it, also if you pm me, email i can send you a materials list

[@Bigblue680]

Lol who’s the sad man you wasted the money on this

[@reneebailey2435]

i made a real ring.

[@ASENEWAGE]

This ring is for kids