How to Make a Basic Paracord Handle Wrap-Common Whipping Knot-Axe Handle Wrap

[@aircavmedic]

I have done 3 canes with this, as well as plant knifes, 3 axes. Love it and keep coming back to it. As one wore out( my first trial one) will be redoing it. Love this channel. Thank you for helping a senior citizen try a new hobby with practical use.

[@CreationsByS]

Great! Thank You Robert!

[@michaelandujo8697]

This technique absolutely worked! Thank you for the detailed video. I whipped the handle to my daughter's Chinese Broadsword and the grip is much better now.

[@jellebelle]

wrapped my old workingmachete this way …. my son watched me do it and later that day he showed me a knife he wrapped himself :-) ….. PERFECT video to start paracord wrapping …. liked and subscribed !

[@michaeldoherty2289]

You don't need to singe the top end. Tighten the finish tag end in the loop and cut the line leaving about 1-2" tag end. Then pull the tag end under the wrap for a cleaner, singeless finish.

[@simonjones7028]

Thankyou. I came here looking to handle wrap my Fiskars XA3 and I was surprised the first video that came up was of you wrapping a Fiskars axe. Handles are very alike the size being the only real difference.

[@ricardo-simoes]

I use this video anytime I need to wrap something (ex: I did this to my bicycle handlebars). THANK YOU for showing how to do this!

[@aircavmedic]

I cannot tell you how many times I used this technique. Outstanding,had hand surgery-side lined a while 👍

[@Moonshinedave1]

I really enjoyed this video, even though I had to turn that music WAY down. I needed a paracord wrap I could do on my knife handle without taking a college course in paracord wrapping, this one, I can do, and will do the trick, thanks again.

[@aircavmedic]

I have used this wrap for several knives & a cane. A great channel

[@razorday6017]

Wow, what a pace. Old Mr Bolt over here. Cheers. I think I'm after something a bit prettier for my new axe but. Thank you.

[@veiledzorba]

Nice! I used this technique to wrap a bugle. Left the tails about 2 inches long, and tucked them away in-between the tubing. Then I thoroughly wet the paracord and let it dry. That stiffened and tightened it up very nicely!

[@donovanw.2943]

Thanks!

[@PoleArms13]

Great step by step how-to video and well paced. I followed your video to wrap my oddly angled compound bow grip. Simple and it looks and feels great. Thanks.

[@aircavmedic]

I have now used this for a cane, but for same brand plant knife, as well as 2 hatches. It’s a great video & a flatter wrap for this particular kind of knife etc. Thank You.

[@rambothearcher8473]

Thank you for making this, I was thinking of ways to make the grip better on my target compound bow and so far this is the best idea yet!! Can’t wait to try it, thank you soo much!!

[@ambhatti1538]

Excellent and concise video! I had an idea of the knot and process but couldn't recall the exact details. I'm going to also try this out for replacing twine wrap on cat trees as well.

[@sjTHEfirst]

Thanks. I needed to make a paracord wrap for the handles of my ammo boxes (Harbor Freight specials) and your video was a very straight forward tutorial on the basic wrap method. Although I (like others have said) had to mute the music.

[@CreationsByS]

Thank You! Appreciate your feedback.

[@alifratyazc9221]

Appreciate your efforts for that simple and easy to understand video. I managed to do this to my own made knife by the help of this video. Keep up the good work. You have a new subscriber.

[@nowakezoneforever6021]

Excellent tutorial...!!! A long overdue mod for my ferro rod, axe, and camp shovel! Great job and thank you.

[@sergeantdef.3572]

Thanks for this video sir.. Finally I made two wrapped handles..and they are perfect. I am very happy!

[@CreationsByS]

Thank you! CBYS

[@robertmartin3090]

Best one, I always come back to- heck I hate getting forgetful at 73

[@alexyo3927]

Thank you I just wrapped a bottle opener I just made. Looks super awesome!

[@CreationsByS]

Thank you! #cbys

[@dlipp23]

This is great! I’ve done about 10 of them, comes out great. Thanks 👍🏼

[@CreationsByS]

Great to hear!

[@plugjanis]

Thank you! Used this to do my truck door handles, worked well!

[@CreationsByS]

Thank you! #cbys

[@twistedsaints]

Great video. Was able to put a wrap on a flashlight (Sofirn Q8 Pro) of mine. The metal gets a bit too hot to hold without it on higher levels and this seems to have fixed the issue. Lets me use it on a higher brightness without heat being a concern.

[@letgodbetrueandeverymanali3656]

Excellent! Used it on my walking stick, thank you.

[@robertmartin3090]

I use this so much, easily understood

[@extrix3039]

this was super easy to follow and do. I have no idea how any one can struggle with this tutorial, it's very clear. thanks!

[@TheJapz1212]

if i can push the LIKE button for 1million times i will definitely do it!!! thank you!

[@platypusdeathstomp]

Great direction and I was able to follow along and complete a wrap. Thank you.

[@ogdon7518]

Great video if you have a spool of paracord. No excess. Works very well

[@Waldgeist84]

Gefällt mir sehr gut, habe ich für mein Beil so gemacht 👍🏼

[@bubba7626]

Simple and OUTSTANDING! Thank You!

[@aircavmedic]

You probably have video somewhere, on this one, I am wondering how to continue through the lanyard hole. Just a thought. Again exactly what I wanted🤙

[@deathtoll_og]

I'm making bottle openers out of rebar and this is a perfect video for making a handle, except I'm using leather

[@Soltheman1]

Wow,at first...could not do it....But when you really concentrated It becomes easy....I didn’t even use paracord just thin rope...nice vid

[@CreationsByS]

Thank you! ✿CBYS @thecbys.com/ ✿ETSY @www.etsy.com/shop/cbysparacordandmore ✿Instagram @instagram.com/cbysparacordandmore/ ✿[e-mail]/creations_bys/

[@jamesdolan5236]

Tarred back line, and jute or sisal are viable alternatives depending on the projects. I use paracord quite a bit, but it can be a bit bulky for certain projects.

[@knowyourhistory]

Thank you for the tutorial. I did this same handle on a Cold Steel fixed blade and it worked great.

[@CreationsByS]

Thank You! If you find our work usefull, support us at ETSY etsy.me/2RrBTu1

[@treizerotrei]

could this work on a curbed pipe as well ?

[@johnjwade]

how do you determine the length of cord to use?

[@maaifoediedelarey4335]

Brilliant !! Just what I was looking for - now I can wrap my (round) fishing rod butt end !

[@CreationsByS]

Thank you! CBYS

[@jamesdolan5236]

You might wish to use back line for that project.

[@maaifoediedelarey4335]

@@jamesdolan5236 Thanks - what exactly is back line ?

[@jamesdolan5236]

@@maaifoediedelarey4335 sorry, that was supposed to be "bank line". (Good old autocorrect). Bank Line is a tarred twine, often used by fishermen when making trot lines. Bank line has a good tensile strength and is much thinner and less bulkier than paracord.

[@maaifoediedelarey4335]

@@jamesdolan5236 Thanks James ! I will look out for that.

[@whatisahandleeee]

Great Video, exactly what I was looking for. Something simple and easy to follow.

[@CreationsByS]

Thank you! ✿Creationsbys on Facebook @facebook.com/cbysparacordandmore/ ✿Instagram @instagram.com/cbysparacordandmore/ ✿[e-mail]/creations_bys/

[@егорчекмарёв-с9т]

is this suitable for a baseball bat???

[@CyberpunkV2077]

Thanks for the upload, it really helped me

[@CreationsByS]

Thank you! #cbys

[@johnhelton457]

I bought Woodglut once and now I have lifetime access to thousands of woodworking projects.

[@CreationsByS]

That’s great.

[@johnhelton457]

@@CreationsByS That's awesome you like it too ✌️👍

[@FredMarz-gt4se]

Hi! Would you please say what is this axe brand? Thanks!

[@dragoneye2391]

so how long is the piece of paracord

[@marcinwisniewski2640]

Thanks for helping. Big thumb up.

[@jsadecki1]

Is there an efficient way to undo this rope handle, if for example you wanted to wash the rope?

[@professorfalken4600]

Nice wrap, thanks.

[@wrends]

simply wonderful, thanks!

[@lukasbocker6740]

Does anyone know how to remove the cord again? I love how this handle feels and it's super nice to carry some additional cord, but how do I get it removed from that grip after I wrapped it?

[@blackgrizly9522]

Awesome just what I was looking for thank you!!

[@CreationsByS]

Thank you! ✿ETSY @www.etsy.com/shop/cbysparacordandmore ✿Instagram @instagram.com/cbysparacordandmore/ ✿[e-mail]/creations_bys/

[@enushalu2548]

Excellent Video !

[@mb_a5383]

Nice technique, but can anyone tell me if this is a practical technique if you are in the wilderness and actually need that Paracord? Is it simple enough to unwind (without tools) or is there another method I should be looking for.

[@willtube61]

Have you tried snipping the top leftover to about an inch, then pulling the end into the wrap using the bottom length? Then use a tool to tuck the bottom end under the wrap as well. Would be cleaner than leaving the end exposed. New to this so just wondering if there's a disadvantage to it.

[@williamskign103]

Eso es muy bueno porq absorbe los impactos ay q poner en toda erramienta q golpee. Y para q no seré urge a caer. Saludos RAZA 😁😁😁🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽

[@m783w]

Excellent

[@thealabamabushcrafter6861]

Very well done video and very easy to follow....

[@CreationsByS]

Thank you! ✿Creationsbys on Facebook @facebook.com/cbysparacordandmore/ ✿Instagram @instagram.com/cbysparacordandmore/ ✿[e-mail]/creations_bys/

[@thealabamabushcrafter6861]

CbyS Paracord and More yeah I just got in my new CRKT Woods Chogan Tomahawk and it has a nice long hickory handle and I was searching for idea's on how to wrap the handle....

[@CreationsByS]

well, have you tried it with our intruction?

[@thealabamabushcrafter6861]

CbyS Paracord and More yes I just finished it and it looks and performs great. I will upload a video on my channel either tonight or tomorrow and I will tell everyone that I learned it from you and post a link in the description...

[@CreationsByS]

Thank you, we do appreciate that!

[@djmarzo1]

Amazing thank you 🙏

[@lisocampos8080]

Thank you!

[@jamesdolan5236]

Just as an extra security measure, I put a bit of super glue or gorilla glue at the top and bottom where I've melted the ends.

[@ibrahimdurmaz1018]

Sağol üstat, çok yardımcı Oldun

[@mitchtrevino]

so to hold down the 2 sides i found it easier to put some tape ove them for security fyi

[@beeks919]

Nice. Thank you.

[@ritawashere5787]

Love your Channel! ❤️ any ideas on how I could cover a wooden cross with paracord? I wish to put it outside by the road for a pet Memorial. I was thinking I could just take wood dowels and secure them together with zip ties or whatever, in the shape of a cross. Then cover it. Help. How could I achieve this. Any suggestions would be amazing!

[@lserg470]

Как называется это плетение?

[@edwardcharles1066]

i love it much respect to u

[@CreationsByS]

Thank You! If you like our work, support us through ETSY etsy.me/2RrBTu1

[@ahmedsrar1283]

Can you make a paracord phone case video??🤔

[@zlatkodervisic9727]

Prelijepo. cestitke.

[@CreationsByS]

Zahvaljujemo Zlatko!

[@ДанијелМрдак]

This is great.Thanks.

[@CreationsByS]

Thank You! www.etsy.com/shop/thecbys If you like our work, support us through ETSY

[@akshatsingh5810]

wow what a cool axe

[@CreationsByS]

Thank you! ✿CBYS @thecbys.com/ ✿ETSY @www.etsy.com/shop/cbysparacordandmore ✿Instagram @instagram.com/cbysparacordandmore/ ✿[e-mail]/creations_bys/

[@CreationsByS]

Thank you! ✿CBYS @thecbys.com/ ✿ETSY @www.etsy.com/shop/cbysparacordandmore ✿Instagram @instagram.com/cbysparacordandmore/ ✿[e-mail]/creations_bys/

[@varisb7012]

Its from fiskars, look it up, they make pretty durable axes.

[@RobaloBill]

Wow can we make this vide o longer

[@uperrsc]

Well done. Thanks!

[@CreationsByS]

Thank you! ✿ETSY @www.etsy.com/shop/cbysparacordandmore ✿Instagram @instagram.com/cbysparacordandmore/ ✿[e-mail]/creations_bys/

[@TheRyma52]

Phenomenal !!! Thx.

[@CreationsByS]

Appreciate.

[@freddiethomas9505]

I'm gonna use this for my practice sai

[@CreationsByS]

Great!

[@guitardaddy6]

Nobody cares

[@freddiethomas9505]

@@guitardaddy6 congratulations you played yourself🤣🤣🤣. I have no clue what's going on in your life to be negative online but if you need a buddy and a beer through these hard times I'll buy your first round if your ever in Lancaster PA

[@2091Ted]

Cool! Thanks for the instructional!

[@Biblicalgiants]

That's awesome! Good upload!

[@CreationsByS]

Thank you! ✿ETSY @www.etsy.com/shop/cbysparacordandmore ✿Instagram @instagram.com/cbysparacordandmore/ ✿[e-mail]/creations_bys/

[@teenagetitan8125]

plejaren giants Are is a great day to

[@jeffreymontano8661]

Can i also do this with leather string??? Anyone??

[@bryananderson3772]

All I think about is active self protection with this inro music

[@MrMatushenko]

Thanks

[@bill1.4all8]

Thank you!!

[@paulmark8347]

exellent

[@CreationsByS]

Thank you! CBYS

[@paulmark8347]

Thank you

[@jethrowomber]

Thank you.

[@CreationsByS]

Thank You! Best. CBYS

[@CoreyCoffell]

"Born with a hatchet"

[@dg4720]

Informative but oddly sensual

[@CreationsByS]

Thank you!

[@passionknife8721]

it is a knot that sinners know 👍🏼

[@miteytuff1]

So... You just leave the singed end sticking out? Great video except for not showing what to do with the cut ends.

[@paulchaney9395]

💚

[@17025601]

Why 4 inches on the upper loop? A much shorter loop would work.

[@alphagrizzly]

GizmoBee1702 agreed. I was expecting something spectacular at the end then realized the same thing

[@thealabamabushcrafter6861]

GizmoBee1702 it doesn't have to be 4 inches but the reason is it gives you more to grab when your training Don on that bottom piece, but the loop doesn't really habe to be 4 inches it needs to be just long enough to put your do get through it I would imagine but hey whay do I know...

[@captnhowdy01able]

It's the same way you snell a hook

[@scotshanley]

Good video but....... WAY TO SLOW AND LONG.

[@davidford1564]

Snap crackhead pop is a wannabe. That's why he likes this video!

[@CreationsByS]

Thank you! #cbys

[@biloliddinsayfidinov5749]

Ok

[@ernestwalden3894]

To slow and difficult. Best and fastest way is the English whip.

[@norby0418]

The music is nauseating!

[@CreationsByS]

Thank you!

[@Thwarptide]

That elevator music JUST HAS TO GO!

[@videodistro]

CRAP! Another video with obnoxious noise in the background. STOP putting "music" on videos. I'd rather hear useful instruction. Sheesh!

[@mattkillam2033]

videodistro lol chill out dude

[@JustlilTwisted]

i agree i had watch it muted

[@supergrover17]

I myself prefer the music to verbal instructions since I learn better that way. I have found quite a few videos that have a verbal dialogue instead of musical accompaniment. Perhaps you could check those out

[@petewebb8052]

CRAP! Another pointless comment which adds nothing to the original video. Sheesh!

[@OldSaltBaby]

Beggers can't be choosers

[@based9930]

That isn't going to stay in place.

[@johnjacobs3502]

......

[@alecswanepoelswanepoel9646]

Irrirating slow