How to Make a Boxing Spar Bar Pro V1

[@wouter7165]

Dude, this sounds like it's better quality than the expensive "real" one

[@age365]

alternatively you could attach a razor sharp machete to the end, to simulate the nerves you feel in a real fight

[@Kewlus]

😂😂😂😂😂

[@kalecardenas9645]

KNOCKOUT oh wait where his head

[@Kewlus]

😂😂😂

[@lvht0615]

😆

[@theuniversaleye9780]

Yeah be more prctical😂

[@annahpaquentin6047]

I purchased both the medium kzbin.infoUgkxfh2XUOHWYHKQYOvSq2gZ6PyCmVkTFGWz and small speed bags from Meister. I'm very glad I got both as the workout is quite different from the two. The small is fantastic for getting your speed built up once familiar with your striking. The medium bag provides a considerable amount more resistance building more strength in your punches. I highly recommend both sizes.Some people have expressed concern over the latex bladder leaking down more frequently than the traditional rubber. I have not found this to be an issue at all.

[@johnamac123]

Reedy, I just completed this project for a gym for mostly Parkinson's Disease (PD) patients. It is organized under the organization "Rock Steady Boxing", our gym is located in Bowling Green, KY. Our members have serious physical limitations, but find boxing a great option for improving their overall physical health and their fine motor, balance and muscle control issues that PD brings. Additionally, I added a kick bar 4" from the floor, but it is identical to the spar bar. For anyone building this project, read carefully Reedy's directions. My version ended up very much like yours, except I used a T-fitting instead of a Cross fitting. The key issue is choosing a 1/2" x 6 ft mast so that it will fit inside the 25mmx47mmx12mm ball bearings. I wasn't a plumber so I didn't know that PVC and iron pipe sizes refer to the ID of the pipe that fits INSIDE the connector. I also used a 1 1/2" PVC pipe and T fitting. I was also able to find a 1 1/2" x 1/2" wall x 6' pipe insulation stick that fits almost perfectly around the bar PVC, with only a small gap. The insulation stick is also pre-cut with one slice down the center and adhesive on each side. You'll need to seek out a good plumbing supplier to find one, my cost was around $6. My other change was I found a 6" diameter medicine ball that weighed 6 lbs for my counter balance. I also used a rubber toilet plunger that also screwed onto the 1/2" mast which I further secured with a hose clamp. Our gym members are so happy with the spar bar I will be adding a 5' version {for shorter boxers) with a second bar at a height for our wheelchair members. Yes, some of our PD patients are confined to a wheelchair, but they still come in and hit the heavy bag, lowered speed bag and whip the same 50 lb battle ropes I do. They are such an inspiration to all of us non-confined boxers. Thank you Reedy, for taking the time to produce these series of videos. Our new spar bar will be a tremendous help to all of our members suffering from Parkinson's Disease and battling its effects at our boxing gym.

[@Kewlus]

Wow John! Thank you for all of your feedback and the modification suggestions. Knowing that my DIY ideas are helping patients is greatly rewarding 🙏😃

[@MD_-ub8rx]

RIP Ali

[@KP-lt9if]

Love your projects brother. From Fiji here.

[@Kewlus]

Thank you 😊

[@gglehteswhtemnAdChrstns]

Most ingenious improvisation I’ve seen in a long time. Well done. Im going to make up.

[@brodcd4649]

Thank you Sir, this is the attachment piece that I needed to complete my set. I have built 2 reflex bags so far, thanks to your vids. 👍🏻🤙

[@rhomotor]

That plunger was a great idea.

[@h3llr361]

You know this guy is for real if even his intro is diy.

[@Robertdavid124]

Brilliant! You saved me $400.

[@Sigrdrifaz]

I love this guy, prototype iterations as a hobby.

[@danilopablo9848]

It's been a whole year and I'm still wanting to make one.

[@danilopablo9848]

I'm currently making mine. I went to a junkyard to scavenge some useful items for this project and then I came across an old spin mop. I took off the mop and kept the pole and its spinning part, I then attached a wood stick to where the mop used to sit and I'm almost ready to go! The only thing I noticed is just that apparently, it doesn't spin as fast as the one in this video as it doesn't have the two ball bearings, probably there is only a small one inside the pole... But I'll be sure once the pole is fixed to a base. Anyway, I think its speed is good enough for a "beginner", and that's what it's intended for by me, so it will do the trick for a while!

[@alikbey]

Stop being lazy..

[@danilopablo9848]

@@alikbey it was not laziness. Anyway, I've done 2 already.

[@silase2029]

@@danilopablo9848 How are they? And what was the final cost for them individually?

[@danilopablo9848]

@@silase2029 about 5 dollars each made from items I've collected from a junkyard.

[@talonmclaren2070]

Love it, genius for a starter kit. Hopefully I'll have a video to send you of what I am working on soon. Still gathering materials and mapping things out.

[@killerkay3964]

underrated channel

[@justintime1307]

Not a bad Idea. Had you not thought about a garden parasol weight to slip it into?? The metal ones can be pegged into the grass in a back garden or screwed/secured into any wooden base

[@renopereira1434]

👍😁 I'm gonna get started tomorrow 👊🏼😎👊🏼

[@renopereira1434]

@@el.malasuerte no haven't started yet 😲🤣😂

[@gator2754]

For anyone with the Everlast punching bag/speed bag stand, the three little 6 inch bars that have the pad on them(or as I used em, to put weights over to hold the stand down) is the perfect size for a 1/2 inch bar to slide right into for a "stand". Just pop the little plastic piece off and a 1/2 in bar slides right in it

[@lonestarkennels4600]

Same here

[@washingtongeraldodeoliveir8338]

Greetings from Brazil. I was looking for a project like yours. Thank you for posting.

[@Kewlus]

You’re most welcome 🙏

[@eduardopassero47]

Claro que ia ter um br aqui kkkkk somos os reis da gambiarra!

[@deltafour1212]

I'm "stealing" this idea! SUBSCRIBED!

[@Hmellon92]

Thank god for this! I’m literally at Bunnings right about to leave and would’ve had to make a second trip!

[@Kewlus]

😝

[@feedthefathersflock3017]

The name or title of any specific deity is capitalized just like any other name, so when “God” is used to refer to “the one God” (in other words, in any monotheistic religion), it is capitalized. For example, you'd capitalize “God” in these sentences: Some Christians give thanks to God before every meal.

[@sinkincones8130]

Feed The Father's Flock shut the fuck up

[@spunkkss3931]

@@feedthefathersflock3017 bruh......

[@dsd-downshiftdave8056]

Did you end up making one? If so, how has it been

[@lckillah]

You put a noodle! Glad you’re one of those you tubers who listen to their fans haha. Good stuff! Is there gonna be a v2? I’d love to make this but waiting if there’s a better version.

[@Kewlus]

Yep! I’m all about listening to my fans. V2 is likely to have a proper brace for the pole rather than using a chair

[@bahamasage9614]

Solid bro! Great build. Great video!

[@Kewlus]

Appreciate it!

[@dannychoban]

I need to be making my own now ❤🥊👊🏻

[@Mont.Cristo]

I need one like this

[@Jesterponed]

Can u make one with arm, knee and foot mechanics? I got a idea for a 3 based set up that i was thinking of making

[@boggycreekbeast]

SWEET! Operates smoothly!

[@adrianmedrano6650]

I'm inspired & motivated

[@tahirhaddad9213]

Thanks you save for me 200$ great DiY

[@J3unG]

Man...your vids are super dope, mate. Thank you. Very motivating for me.

[@dcram76]

I’d like to learn how to make one where the bar spins vertical instead of horizontal to practice slipping jabs and crosses

[@Kewlus]

Interesting idea!!!

[@dcram76]

@@Kewlus it would be great if it was logically possible.

[@dcram76]

I don’t know if you remember General Grivous from the Star Wars prequels. He was the robot with 6 lightsabers that all spun vertically like plane propellers. If there’s a way to invent one of those that could be useful for practicing defense against jabs and crosses and maybe uppercuts on your own.

[@dcram76]

Another one I was thinking about was like a double end bag but instead of a bag there is a 2x4 or something with the end pointing at you(not the rails). Almost like real jabs being thrown at you. For me personally, cobra reflex bags and double end bags do nothing for me. I think of it as an opponents moving head you have to hit but never strikes back.

[@Kewlus]

That is brilliant!!!!

[@klum8872]

Thanks for the idea. Creating my own out of pvc and such. Instead of spending 300 dollars for something that eventually might end up on the curb

[@Kewlus]

You’re most welcome 🤙

[@deathbunny3048]

so you can't do any type of 360 degree footwork cause of all the stuff that's in the way, how abouts you just use a simple parasol base instead, fill it with sand or cement, then it'll be rock solid and won't move either and you can comfortably work around it from any angle?

[@paulthemediacreator]

This is so cool! I’ve subscribed. This channel will be huge!

[@Kewlus]

Thank you so much!

[@oli_dall-r4112]

really good build ! creative !

[@Kewlus]

Thank you all for your support! I've turned my channel into a global brand of DIY kits: kewlus.com, including World's First Modular Cobra Bag!

[@guitarest452452]

Thank you! I was about to spend $300 on one of these damn things. Def Sub!

[@ivando5372]

Thanks for the idea. I will do a little modification to your design.

[@thurlesmoran7336]

This fella is nuts 😂

[@War_Legion]

I wonder what will happen if you use a PVC pipe as the pole. Then you have a Cobra bag and a spar bar in one

[@Kewlus]

I tried and it didn’t work. The PVC pipe dampened the spar bar rotation to a point that it was not practical

[@War_Legion]

@@Kewlus Oh that would be Nice if it worked

[@JeraaChannel]

Very nice, i can make this for my daughter to train her

[@ecuasector]

Eres lo maximo bother saludos desde la mitad del mundo (ecuador) un abrazo

[@ИльяБекетов-м1л]

Супер💪🎅👍. Такие игрушки, когда тренировки интереснее спаринга👍

[@Kewlus]

Thank you!

[@dharmveerclaire1555]

Easy to make

[@damondominguezarenas2044]

Se podrá hacer con solo PVC? Estaría increíble que pudieras medidas de cada cosa, me encantó el video gracias

[@Kewlus]

Could someone please translate to English?

[@dumtakadumtaka]

@@Kewlus he is asking if it posible to make this with only pvc material. And it would be great if you can put the measures units of all the parts.

[@Kewlus]

Thank you for the translation! The key to the design is a rigid mast. PVC pipes bend and don’t offer the same rigidity as metal. For detailed instructions visit www.fighterdiy.com/2020/05/diy-spar-bar-pro.html?m=1

[@x-acid_killer-_-1880]

Excelente!!! Mi querido Jorge Campos!

[@hhova29]

This is awesome. I’m taking that ball joint idea and material to try to create something more compact for my planned space

[@MarioAxl]

this is just what i needed, than you so much man.

[@RafaelBorgesRDB]

Have you tried to combine it with the Cobra? Would be very interesting!

[@Kewlus]

Yep. It doesn’t work but it the spring is replaced by a solid pipe, extending the mast then you could have a spar bar that uses the same platform as the cobra bag

[@tech-wondo1135]

Need ur help buddy, i made this, but for convenience i used pvc pipe instead of galvanized pipe...now the pipe is not steady and tilts to one side, can you give any suggestions

[@apprenticelogic6642]

Use 1 inch 1/4 pvc !fair play great concept 👍🏿

[@lizjames1718]

You u rock!! Cheap and it works awesome!!

[@Kewlus]

Thank you 😃

[@lonestarkennels4600]

Why didn't you use pvc insulation tube instead? Cost more?

[@Kewlus]

Yes and doesn’t bounce as well

[@LegacyOfficialChannel]

maybe try concrete in a bucket with the beam centered, I think that’s what i’m gonna do when i build one instead of the chair. Cheers and thank you

[@Kewlus]

This weekend I’ll show you another option. Concrete in a bucket though is also a good idea 👍👌😆

[@angelsjoker8190]

Looks great! And the commercial ones are like over $300.

[@getupstarthustling4062]

Gonna put this on my cobra bag thanks m8

[@dufenshmeitz]

Sir, please give me the + joint and ball bearing dimension........and I am 6ft so what height you will recommend me for vertical bar?

[@Kewlus]

All the details are here: www.fighterdiy.com/2020/05/diy-spar-bar-pro.html

[@sfs6990]

Got yrself a new subscriber champ! Awesome work

[@TT-ox5mh]

UK. Absolutely awesome. Thanks dude. Just subscribed 👍

[@jcnz9861]

Just... brilliant!

[@silverioramonandres7939]

Excuse a question of what measurement are the bearings in inches and the cross elbow that you used

[@Kewlus]

Most of the details are here: www.fighterdiy.com/2020/05/diy-spar-bar-pro.html

[@ralu3111]

You're a genius 👏. Thx

[@thechannelofrandomness6814]

Can you give a list of stuff you use so it can be easier so I can get the stuff?

[@Kewlus]

It's all here brother: www.fighterdiy.com/2020/05/diy-spar-bar-pro.html If you have any questions, please ask them on that blog page in the comments section

[@iamnemo8479]

Very cool 😎👍

[@christianbustamante7488]

What size did you use for your cross and tee joints and the pvc pipe that fits them

[@Kewlus]

Most of the details are on this page: www.fighterdiy.com/2020/05/diy-spar-bar-pro.html If you have any further questions please ask on that page and I will answer right away 🤙

[@Jason-ub4ui]

Aussie ingenuity... Onya mate!😜

[@Kewlus]

Thank you brother 🤙😄

[@Texaz71113]

@Reedy, question, im looking at the bearings inside the four way and the size of the pole, im not the sharpest tool in the shed but im trying to figure out how u are keeping the mechanism from sliding? The pole is wayyy thinner than the bearings n even with the tape which doesn't look like u put alot on the pole, how is it staying there? What else is filling the space between tha pole n bearings, @ the 2:37 mark when u take the arm off to show the pin system i notice that there is something left on the pole, is that a bearing? How do u fill the space? Those bearings are wayy big for a half in pole

[@Kewlus]

There is only a small gap between the inner diameter of the bearings and the pole. Tape around the pole does the job

[@miguelsoto9579]

Wow nice I had try building one but. Whit not verings .. cool u been doing nice stuff thanks 4 all of those I deals

[@Kewlus]

You’re most welcome 👌😃

[@jhibzdiocera6682]

I'm a avid fan of your vids and I would like to know if its correct - 1/2 inch GI pipe, Ball bearing 25x47x12 and the 40mm T-pipe PVC. Also will mention some packing tapes. Thanks.

[@Kewlus]

Thank you. Yep you’re spot on. End of week I’ll also show how to stabilise it. Stay tuned.

[@jhibzdiocera6682]

Alright, thank you for giving us an alternative ways to box even in our homes, Sending love from the Philippines

[@Kewlus]

You’re most welcome 🙏

[@rhonalynestrelles]

Wow i love this thing.

[@NasSombras]

Hi, could you tell me the size of each object? I have trouble understanding English, so some things I couldn't understand, in this case the size, width and I wanted to know if it's possible to replace the water and the chair with something else?

[@Kewlus]

Check out these DIY instructions on my website: kewlus.com/blogs/diy/how-to-make-boxing-spar-bar

[@alexluthor7215]

I actually think I can make this 💯👌🏽

[@6IXto506]

This one is awesome! I'm gonna make mine, and put it on YT, and give you credit. Will let you know when it's up!

[@Kewlus]

Please do! I’d love to see it!!! Good luck and stay tuned as there’s an upgrade coming next week 😜😜😜

[@Gripaddicts]

Wow awesome video now time to get to making😜😜😜

[@Kewlus]

Next week I’ll reveal an upgrade to this so make sure not to miss 😜😜😜

[@Gripaddicts]

Reedy Kewlus ok i will not miss t

[@warmachinebodybuilding]

Excellent job bro and super like by Warmachine bodybuilding of garage Gym italy

[@Kewlus]

Thank you 😊

[@nicholas4436]

Hey Reedy great video! looking at making something like this myself. I picked up some 25mm x 47mm x 12mm bearings and was wondering if they'll fit in the 40mm PVC Tee/Cross section that you linked on your website. I thought since the bearing has a diameter of 47mm it wouldn't fit in the 40mm PVC section? Thanks and keep up the good work!

[@andrewle2727]

can you list the material and the size of them cause it's kind of confusing to know what to buy everything

[@Kewlus]

Yep just setting up all the details on a new blog. Should be ready by weekend Stay tuned!

[@raydomenech7646]

Great idea!

[@LonelyHeartsChannel]

Wow, you make it look easy to make. Now, if I can only move my table tennis table elsewhere hmm...

[@Kewlus]

😂😂😂

[@rocknwithnick6896]

This dude's awesome love the videos

[@Kewlus]

Thank you 😊

[@dieselbuff854]

You really are Awesome, and have skills to make this. How much is it to order all these items? And your fee my friend?

[@Kewlus]

Thank you. I’ve just launched my first product which you can order online: kewlus.com more to come!

[@sagha919]

Your video is excelent

[@abdelbassitsahraoui5630]

Good handmade bar bro 👍

[@REALERTHANTHEMOST]

Smart guy

[@lukao737]

Deveria existir um dispositivo no KZbin em que só tocar já traduziria outras línguas para o nosso português

[@Kewlus]

I agree. I had to copy and paste your text into a translation device to understand what you wrote!

[@Kewlus]

Concordo. Eu tive que copiar e colar seu texto em um dispositivo de tradução para entender o que você escreveu!

[@lukao737]

@@Kewlus Pois é brother.Fazer o quê?Até que os donos do KZbin tenham essa idéia temos que aceitar isso no momento.

[@alitouggourt1566]

Thankyou Ali of Wilaya Touggourt Algérie.

[@barrettleverette8518]

Just subscribed you saved me a ton your awesome Respect..

[@rogercobo]

It works incredibly! By the way, can you make a list of all the material? Some of this names are specific and I don't get them 😅 at least if I see them I can search for a translate (I'm spanish). Thanks anyway ;)

[@Kewlus]

Thank you 😊 Please see if my blog page on this helps: www.fighterdiy.com/2020/05/diy-spar-bar-pro.html?m=1

[@YoussefZeddy7]

It's amazing

[@ofer199]

Hi amazing video quick question where did you get the ball bearing. I am looking for an 1.5 outside diameter x 0.5 inner diameter and can’t find one

[@Kewlus]

I got mine from Bunnings here in Australia. Check in a local bearings shop. They normally stock all kinds

[@ofer199]

Reedy Kewlus can you tell me what are the sizes you used ? I used the same pipes diameter you showed on you video and I can fin a ball bearing with 1 1/2 inch outside diameter with 1/2 inch inner diameter. Thx again

[@Kewlus]

2-pack of those exact bearings on Amazon US here: amzn.to/2AP055H

[@ofer199]

Reedy Kewlus thx a lot !!! Appreciate you amazing idea and work

[@Kewlus]

You’re most welcome 🙏

[@salsar7984]

Pool noodle purchases after this channel 📈📈📈📈

[@ryuki5438]

Looks very nice. I want to build one myself as I don't want to spend too much money. How much did the material cost roughly?

[@Kewlus]

About $30

[@collinskinner8044]

The bearings are no longer on Amazon, can you link other ones that are the same

[@Kewlus]

Thanks for letting me know. Here's another seller with the same bearings: amzn.to/34eLo7r

[@chizi7456]

Omg it’s here

[@Kewlus]

😁

[@alandgomez5905]

Very cool bro. I remember seeing this type of setup some years back but as you said, 'pro' version. Looks pretty damn smooth lol.

[@brandysaunders3139]

Cwc

[@SUF-py4ix]

I love it mate I’m sure you’re meant to be punching the ball though. No point having it otherwise.

[@Kewlus]

Thank you. The ball actually adds weight to the top and reduces any wobble from the punches. Without that extra weight at the top there is much more wobble.

[@joshuamartinez8168]

Also what size was the white pipe?

[@itzcjofficial6265]

We made the cobra bag designe you did... it didnt work, I dont know why??? Any advise tho?

[@Kewlus]

With the spring or PVC pipe?

[@itzcjofficial6265]

@@Kewlus PVC...

[@Kewlus]

Which video did you follow?

[@itzcjofficial6265]

@@Kewlus Cobra bag with the football and funnell thing...

[@Kewlus]

kzbin.info/www/bejne/ZpCqgYx6jtFoiZY that one?

[@maggillaguerrilla830]

Whaaaaaaaaat you put a pool noodle on it too? Good job. Your intro is still pretty hilarious.

[@Kewlus]

Thanks 😊 😆

[@multibillionsspent]

Good shit, keeping the active people busy during the "scamdemic", people stop criticizing each other. This guy is trying to save you some coins and stimulate creative thinking = deprogramming!!!!! stay woke.

[@ivanhuertac.2687]

Sparring Barr!