How to Make a Carbon Fiber Parts Clone [DIY] (Making Mold & Air Scoop)

[@dbCarbon]

When the flange broke my jaw dropped, but then that squirrel screamed and I cracked up. Thank you for that great edit. I subbed just for that.

[@ECOLAPStudio]

Hello, Buddy! Thank you. I'm still studying both carbon and video. I'm going to make a more fun and informative video. Stay tuned for my channel. Thank you for watching.

[@fahadsdileep6176]

Your videos are just awesome. I'm a beginner in making carbon fiber parts and your steps influence my works so much.

[@Chrisgarage10]

I love the editing and how you tossing the parts around...shit is funny 😄 great vid

[@ECOLAPStudio]

Hello, Buddy! I will make more fun and useful videos. Look forward to the next video. Thank you for watching.

[@bartomiejz151]

@@ECOLAPStudio Hope You will go viral, You totally deserve it ^^

[@hanifsimpson]

I just found your channel and I'm really grateful for the content you put out. Very nice editing and formula altogether. What's most import are the steps and details which you didn't skip.

[@defalt45]

I just want to thank you for all of your videos. They are precious resources. I want to launch a car modification atelier and this has helped me very very much.

[@grilz12]

I almost passed out when I saw the vacuum bag. I never knew that existed ! I have so much carbon cloth from failed attempts at making things with no vac ! Thanks !😨

[@kevinkev1530]

Why did you fail so much

[@grilz12]

kevin bailey because the vacuum helps tremendously in getting the epoxy to spread into the fiber evenly and helps the fiber conform to the mold ! also leaves a smooth finish rather trying to brush it on and sand it down etc over and over again. some parts just can’t be done without a vac bag !

[@yamaharaptor1896]

Could you please write out a list for the items needed for this, i want to make these fiberglass moulds for lots of other items please

[@ECOLAPStudio]

Hello, Buddy! I will briefly tell you the ingredients you need. * Making Mold * Yellow wax Epoxy gel coat (or polyester gel coat) Epoxy resin (or polyester resin) Fiberglass cloth * Making Parts * Carbon fiber cloth Epoxy clear gel coat (can be replaced with epoxy resin) Epoxy resin Perforated release film Vacuum bag and vacuum pump It is a basic material.

[@yamaharaptor1896]

@@ECOLAPStudio Thanks, also when you apply the first gel coat, how long is the wait till you apply fiber glass, and then the epoxy rein and 2nd fiber glass?? What are the wait times please

[@philso7872]

@@ECOLAPStudio don't forget the release wax. Thanks for a well thought out video.

[@0033TEA]

완전 금손 이시네요. 이런 아이디어와 솜씨에 감탄하고 존경합니다.

[@ECOLAPStudio]

감사합니다! 아직 많이 부족하지만 더 열심히 노력할테니 지켜봐주세요!

[@hannesaltenfelder4302]

If you only had one part and you would like to make a mirrored copy, how would you do it (without a CAD model)?

[@crazymasina8524]

4:24 has me laughing to tears

[@BisforBoost]

where are you getting that style vaccum bags?

[@ECOLAPStudio]

Hello, Buddy! The vacuum bag is nothing special. The vacuum bag is for clothes. I bought it in the online shop in South Korea. Maybe you can buy it easily in your country. I hope you helpful.

[@BisforBoost]

@@ECOLAPStudio Thanks for the reply seems like a cheap and easy way to level out the resin. When you do have a vaccum set up

[@ECOLAPStudio]

@@BisforBoost Yes, That's exactly right. When it is vacuumed, unnecessary resin is absorbed by the bleeder breather. And the carbon fiber cloth is pressed into the mold.

[@Jpcars636]

Where do you get the air bag and other materials like perforated material etc

[@betarr80]

beutiful and fun video. can i ask how much you wait when you make the mould after the gelcoat? in the video seems that you put gelcoat and after fiberglass and resin

[@mlinecomposites1]

Good video If I may make a suggestion. Make your flanges wider, take more time to make them more smooth. Also make your mold more robust, more bulk up of course. Good job though

[@guardrailbiter]

Excellent video. Thank you. Dunno if it's a byproduct of a quiet workshop, but the audio kinda reminds me of those creepy ASMR vids.

[@zachlaraquel796]

Can i vacuum withouth the breather and bleeder cloth or any alternatives for that cloth because i cant find it here in my country

[@링권]

이게 리얼 카본 제작하는거맞나요? 영상 흥미있게 잘보구잇습니다 차 관련 카본파츠 만드는 영상 많이 올려주시면 좋을거같아요

[@lungtamik]

What is the white cloth you used around the blue perforated release film before putting into the vacuum bag ? Also what fibreglass weight cloth do you use ? Keep up the videos !!!

[@lifeofarthid3232]

your VDOs are so addictive to watch lol been sitting here for hours just going though them. thank you for sharing

[@edoardopoli3354]

Ciao, volevo costruire un cofano in carbonio, posso seguire lo stesso procedimento che hai fatto qui?? Grazie mille

[@ECOLAPStudio]

Hello, Buddy! Making a carbon fiber hood is very complex and difficult. I haven't tried it. I think it will be similar to the method in this video, but I can't give any exact help. I am so sorry.

[@felixreinaldo4752]

With your method is the vacum bag consumeable or reusable

[@ECOLAPStudio]

Hello, Buddy! It could reuse the vacuum bag the way I use it. However, the number of times is not high. I think it is probably 1-2 times. I use a new vacuum bag whenever possible. It is good for maintaining vacuum.

[@felixreinaldo4752]

ECO-LAP Studio well thanks for the info your work is great keep it up 👍🏾

[@ECOLAPStudio]

@@felixreinaldo4752 Thank you.

[@lukynuryadin8165]

You. Sir. Have a good sense of humor. Subscribed.

[@alessandrosarcia]

Hello, can you link below where did you buy the plastic bag with valve and the pump to do vacuum? Txs

[@africans1968]

Were can I buy the soft yellow wax?

[@berkcaglar3941]

man i love these channel please do some forged carbon and other patterns

[@ECOLAPStudio]

Hello, Buddy! Ok. I received your requirement. I know how to make forged carbon fiber. But now there are many other woks. If I have a chance, I'll make a video. Thank you for watching.

[@cilaptrcili]

hahahah nice job dude and you make me laugh with the scenario of directing the video hahah ,that is it nice job

[@diegoconti7166]

Hola una opinion yo uso un velo de superficie primero bien mojado con saca burbujas despues que tira empieso con fibra para garantizar que no te quede aire saludos

[@TeslaDIY]

can you provide link to the hand suction pump? and/or the vacuum bag too? Thanks for the great tutorial videos!

[@ECOLAPStudio]

Hello, Buddy! I used vacuum bags and pump for clothing and food. It will be available to you too.

[@TeslaDIY]

ECO-LAP Studio gamsahabnida!

[@Marius-md8vl]

Whats that black fluid?

[@MacBookAir-cu4fb]

If you keep posting carbon fibre stuff, your Chanel will explode and hit 1 mio subs still in this year!

[@ECOLAPStudio]

Hello, Buddy! I appreciate you. Thank you so much. I'm going to make a fun and informative video. Stay tuned to my channel. Thank you for watching.

[@lukeeboy149]

Is there another name for the polyester gel coat? Seems hard to find on eBay ..

[@andreamariocostantini4329]

Sei un grande! adoro come li fai venire nonostante non hai attrezzatura professionale e ti vengono benissimo! dove compri i prodotti?

[@ECOLAPStudio]

Hello, Buddy! Thank you for your comment. I do not make carbon fiber for sale. I want to share how to make carbon fiber easily and simply with many people. Thank you for watching.

[@kenneth9500]

this is the only channel I clicked subscribe on my first watch.

[@jesseambachtsheer1138]

Nice vid again bud😁

[@ECOLAPStudio]

Hello, Buddy! Thank you for your comment. Please look forward to the next video. I'll make an interesting video. Thank you for watching.

[@artongashi6206]

which is best for use of fiberglass, epoxy resin or polyester resin

[@leo82yk]

How did you polish?

[@newbieginner3176]

Can you provide a link for the materials you are using

[@zerogarage6933]

DONDE COMPRAS TODO LOS MATERIALES PARA HACER LOS MOLDE Y REPARACIONES? HE VISTO VARIAS PAGINAS PERO CLARO NO SE DONDE COMPRAR MATERIALES CON CALIDAD POR SI PODRIAS AYUDARME GRACIASS Y SIGUE CON LOS VIDEOS SE APRENDE MUCHO SALUDOS

[@ECOLAPStudio]

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. Also, if you want skinning, I recommend 240g carbon fiber cloth. www.easycomposites.co.uk/

[@zerogarage6933]

@@ECOLAPStudio podrias decirme cuales son las tiendas de Korea si puede ser al igual que easycomposites es buena tienfa pero me gustaria saber mas tiendas gracias

[@mayankpandey5099]

When you use Carbon fiber why it's not get stretched while handling????

[@miyu1028]

which resin are u using ? no wax or with wax?

[@ECOLAPStudio]

Hello, Friend. I used laminating epoxy resin when laminate the carbon fiber cloths. Release agent such as wax or PVA is required for demold.

[@bambino4604]

Hey Buddy, i've a short question. Why are'nt you using the Original one as Mould? Or would you show "us" the way to build a mould? Very very good 👌 i wish i had some of your skills 😬

[@ECOLAPStudio]

Hello, Buddy! It can't use the original as a mold. Using the original as a mold may damage the original. If It use the original as a mold, the faces are reversed. And It can't make it the same size as the original. If it use the original as a mold, the product becomes a little small. Finally I wanted to show you how to make a simple mold. I hope helpful.

[@bambino4604]

@@ECOLAPStudio you've been right 🙈 i forgot the smaller size :) really amazing how you're handle it 👌 i wish i could do the same 😭😬

[@ECOLAPStudio]

@@bambino4604 If you have any questions about working on carbon fiber, send me a comment or email. I'll tell you what I know Thank you.

[@erdemtopcu472]

ATTENTION ( If you aren't wont be a new patient in hospital) 1-While you cutting carbon fiber cloth and fiber glass you must use mask for be protect from particles of carbon 2- Measure your parts and cut just right. 3-Before cut the carbon paste double sided tape on your cut line and cut the tape by dividing it in half. 4-Use PVA foil for in place of the blue film.( PVA foil is have two side ; bright and mat. You can use it however you want.) 5-Certainly, you must use a ventilation while working with carbon fiber.

[@SMELTube]

Very nice Channel Dude! You deserve more subscribers

[@ryzenblack]

Hast ein Link, wo man sich die benötigten Materialien besorgen kann?

[@cre8tivegarage157]

Nice parts🔥🔥 , learned something outta this video

[@foesfly3047]

Amusing yet educational

[@themechanicdrredewaan5916]

Where do you buy the wax?

[@yamaharaptor1896]

Hi, I have tried lots of times but its keep on failing. I am using a red tooling gel coat, then when its sticky, i apply fiber glass sheet with epoxy resin. It keeps sticking to the product, i use plenty of wax... Do i need the polyester gel coat, the tooling one is very strong smell

[@ECOLAPStudio]

Hello, Buddy! You don't need to use a polyester gel coat. Epoxy gel coats have a very long curing time. If the ambient temperature is increased by using a heater, curing time is shortened.

[@yamaharaptor1896]

@@ECOLAPStudio I have a red tooling polyester gel coat, I also ordered normal polyester gel coat, Will try make the new molds.

[@yamaharaptor1896]

@@ECOLAPStudio I have tried to make molds with red tooling gel coats, everytime i take the mold off, it cracks in some places, how do i prevent this?

[@upjun76]

올려주신 동영상 항상 재미있게 보고 있습니다. 질문 하나 드려도 될까요? 매번 파츠위에 카본을 래핑하는 작업만 하다 이번엔 풀카본을 만들어 보려 합니다. 몰드는 있는데.. 위 동영상 처럼 몰드에 릴리즈왁스 바르고 탑코트에폭시 올린뒤 카본을 씌우면 모양이 잡히지 않습니다. 겔코트 작업할때는 2시간 정도 지촉경화 후 작업하면 잘 잡히는데요.. 에폭시도 일정 시간 경화후 카본을 올려야 하는지요? 아니면 최초 올릴때는 탑코트 에폭시 같은 제품이 아닌 클리어 겔코트 같은 별도 제품을 써야 하는지요?

[@evileyes62]

Awesome work! How much The weight of fiberglass you used?

[@dhupee]

do you actually reuse that vaccum bag or is it a single use?

[@ECOLAPStudio]

Hello, Buddy! I do not reuse vacuum bags. The vacuum bag used has an epoxy resin powder. It interferes with making other parts.

[@Cliffracer46]

Hey mate, can you link the products you use? Also, have you ever considered selling some stuff? Example phone cases etc..

[@ECOLAPStudio]

Hello, Buddy! I bought epoxy resins on Korean online shop. However, Korean online shops do not ship overseas. I'll give you a UK online shop. You will find what you want. www.easycomposites.co.uk/ I'm not selling carbon fiber. I have a different job and want to convey information and fun to many people through video. Please comment or email me if you have any questions. Thanks for watching.

[@channelfargone]

Nice job. Fun video.

[@Rudra-o6x]

Bro please provide links of the products 🙏

[@av8shunmeckaneck]

Does he always use a brand new package of wax? I don't think I've seen him open a used one...

[@zetascry1413]

Can you use the original intakes as a mold? I’d like to go straight into applying carbon fiber cloth. Appreciate your response

[@ECOLAPStudio]

Hello, Buddy! You cannot use the original parts as mold. If the original parts are used as a mold, they will have the opposite shape. Also, the size is a little smaller. I hope you helpful.

[@ttoperformance1]

Erstmal Daumen hoch zu deiner Arbeit... Echt gut. Was mach mal interessieren würde wie man einen stabilen und leichten Splitter bzw. Unterfahrschutz als Sandwich baut. Im bestenfalls dann um die 10 mm stark. Gerade für uns im Bereich Rennwagen interessant.

[@존씨네금은방]

볼때마다 신기해요 🙄 잘보고갑니다!

[@ECOLAPStudio]

고맙습니다!! 다음 영상도 기대해주세요! 더더욱 재미있고 즐거운 영상 만들겠습니다~ ^^

[@francescobellopede5891]

Ciao realizzeresti anche rivestimento per carene moto?

[@imestia7911]

They say carbon fiber is very resistant but if you can break it by hands it means it's super weak no?

[@ECOLAPStudio]

Hello friend. The damaged part in the video is not a carbon fiber part, but a part of the mold made of FRP.

[@금은방이선생]

기다리고있었어요❕

[@ECOLAPStudio]

기다려주셔서 감사합니다~ 금은방이선생 채널 유익한 영상 잘 보고 있습니다!!ㅋㅋ

[@inventiveobsession1012]

may i know where to buy these carbon fiber paper>?

[@ECOLAPStudio]

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

[@adventuremoto4932]

La pregunta es si reciste alta temperatura

[@danielpycel5948]

i like the video simple clears all Thanks

[@yahtadi5152]

After two vids of this channel. I subs

[@Night_Spirit_workshop]

Soo cool process - very clean. Thanks!

[@mahreeohhhh]

You do really clean work!

[@ioio4122]

장인지로 파란색은 처음보네요 특별한가요??

[@ECOLAPStudio]

안녕하세요! 내용물은 기존의 것과 다르지 않습니다. 그냥 최근에 스티커 색상만 바뀐 것으로 알고 있습니다^^

[@이대호-h5t]

혹시 작업도 해주시는지요??

[@ECOLAPStudio]

안녕하세요. 안타깝게도 직업으로써 카본 작업을 하는 것이 아니라서 작업의뢰는 받고 있지 않습니다ㅠ 도움이 되지 못해서 죄송합니다.

[@luki9292]

What is that yellow wax? Any links to buy?

[@ECOLAPStudio]

Hello, Buddy! I am buying materials from Korea. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in England. www.easycomposites.co.uk/#!/patterns-moulds-and-tooling/Mould-Making-Materials/soft-yellow-filleting-and-filling-wax.html

[@jakubrysz3287]

You are making really great job and this is funny. Keep it work

[@silverSl1DE]

SEHR geiler Kanal! Ich überlege schon länger, die Motorabdeckung vom N52 325i zu individualisieren. Dachte an lack. Aber das Kohlefaser wäre natürlich ne weitere Ebene! Glasfasermatten und zeug müsste ich noch von ner stoßstangenreparatur haben... Wo bekommt man die Kohlefaserlappen her? Und welche Harze/Hersteller bevorzugst du? Ansonsten: weiter so! Sehe es mir supergerne an!

[@ECOLAPStudio]

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

[@R1j0hn]

Yours compared to the originals would've been nice ! But great job, for parts that I'm sure are worth a few hundred $$$.

[@pierreduplessis1507]

Great video

[@bmwmpower326]

Good job brother God bless you

[@gregreynolds9708]

Where can I buy these bags???? Great videos!

[@ECOLAPStudio]

Hello, Buddy! Do you mean vacuum bag? I used a vacuum bag for clothes. You will find a vacuum bag for in your country. I like to use ingredients that are readily available around me. Please leave a comment if you have any questions.

[@bloodypsycho6025]

Are you capable of showing how to make carbon fiber body panels? Because they are way to expensive to buy from a shop

[@ECOLAPStudio]

Hi friend! I am working at home. So I can't do big things. If I have a workspace, I will be working on a big project. Please wait a minute. I will try for my subscribers and my goals.

[@bloodypsycho6025]

ECO-LAP Studio thats fine, your clearly talented. I hope you grow

[@ECOLAPStudio]

@@bloodypsycho6025 Thank you so much. I appreciate you.

[@CrazyCat229]

Thank you for not talking for 5 hours about what you're doing!

[@max.racing]

Dude you are amazing! I will do the same in my car! Can you please make full carbon bucket seats and outter aero mirrors?

[@김영현-v3l]

혹시 diy로 카본 낚시대 같은거는 만드시기 힘드시겠죠??

[@ECOLAPStudio]

카본 낚시대나, 골프채 샤프트도 생각을 해봤지만 제가 내린 결론은 사용할 수 없고, 무의미하다 였습니다. 왜냐하면 낚시대나 골프채 샤프트는 단순히 카본으로 모양을 만드는 것이 아니라 휘어짐과 강도, 탄성 등에 대한 학습이 없다면 만들 수가 없습니다. 물론 단순히 막대기 모양만을 만든다면 얼마든지 만들 수 있겠지만 그것은 제대로 사용할 수 없는 단순한 막대기이기 때문에 포기했습니다. ^^

[@Okjink]

카본의 끝판왕이라 볼수 있는분야가 샤프트라 보심 되며 제들은 드라이카본이라는성형법으로 해야하기에 간단한 diy로는 불가능 하다고 볼수 있죠 단순원형샤프트처럼보이지만 정밀도가 상당히 필요합니다 에코님도 diy치고는 고퀄이심니다~ 잼나게 보고있어요~

[@굿굿-c4q]

작업시 필요란 물품은 어디서 사시나요?

[@bhaveshbabu3297]

Naci👍👍job

[@samesaw]

Your actions speak louder than words !!

[@kanehowl1582]

I laughed at the gloves breaking, great job!

[@TomFly]

Sehr geil! Und so einfach, wenn man weiß wie es geht…😉👍👍

[@nubmikeyz6521]

Amazing videos~ I have watched all of them :). Would you attempt to make the "Forged Carbon Fiber"? Thank you :) :) much love

[@ECOLAPStudio]

Hello, Buddy! Thanks for the comment. I know how to make forged carbon fiber. But now there are many other tasks. If I have a chance, I'll make a video. Thank you for watching.

[@luigicosta4520]

Hello do you do custom work for privates? I have some car pieces to do in carbon fiber....i have seen your videos and I thought immediately to write to you.... Let me know

[@ECOLAPStudio]

Hello, Buddy! I'm so sorry. I'm not a carbon fiber seller, and I do not making for selling. I just like carbon fiber. so I make for my own. I'm will make a fun and informative video. I'm so sorry, I couldn't help you.

[@ratgreen]

Inb4 this channel goes to 100K+ subs. Great videos man keep making them

[@司徒文迪]

Hey man , may you make a carbon helmet? Thanks!

[@gilbertocastro805]

Donde puedo conseguir la fibra de carbono? Saludos

[@ECOLAPStudio]

Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/

[@TV-eg4xg]

진짜 볼수록 멋져서 구독,좋아요 눌르고갑니다!! 이런제주있으시면 너무좋겠어요! 저도 M오너 인데 진짜 카본제품들 너무비싸서ㅠ

[@ECOLAPStudio]

안녕하세요~ 정품 카본은 참 무지막지하게 비싸죠ㅠㅠ 근데 막상 작업을 해보면 작업 시간과 난위도를 생각해보면 말도 안되게 비싼 것은 아니라는 생각도 듭니다. 그래도 뭐 비싼건 사실이긴 하죠^^ 구독 감사합니다!!

[@TV-eg4xg]

ECO-LAP Studio 맞아요 정성과 시간이 들어가니까요!ㅋㅋ

[@cyclonetcracer]

Great vid!!

[@b1ejc]

What an awesome chanel, Im dying for new videos, when i first saw it I smashed the subscribe button 😁 some of our friends are waiting you do to a video of small details getting carbon wrapped. We have s lot of problems to lay carbon on fiat 500 abarth buttons on steering wheel because it has 2-3 millimeter of plastic and cant get the hole cut properly on the middle. Any suggestions?

[@ECOLAPStudio]

Hello, Buddy! It is difficult to judge the exact situation. Can you show me the picture? Let's solve the problem with me. I want to help you. [e-mail]

[@mikedewulf5771]

It's realy cool and u make it look so easy...I wont to try somthing out on one day by myself,Just as test 1'st on somthing little 2 start...Great video's and how 2,And yeah Extreme Funny how you handle and toss those beautiful Carbon parts around LoL 😁 Grtz from Belgium ❤ Carbon Fibre

[@madmike5144]

Cool video, that editing is wicked, also very interesting contents

[@HappyPappynKatyTX]

vacuum bag suck tool or set, what is it, where can i find it, i need it.

[@ECOLAPStudio]

Hello, Buddy! I used a vacuum bag for clothing. I think it will be easy for you to buy too.

[@HappyPappynKatyTX]

@@ECOLAPStudio brilliant. I will be doing the same. Skinning my mud flaps with carbon fiber.

[@hたつ]

すごいですね！！僕のミニクーパーのパーツも作って欲しいくらいです。

[@eyfamazlifa90]

Next video make bumper car pls..

[@ECOLAPStudio]

Hello, Buddy! I want to make a bumper too. But I work at home, so it's hard to work too big. T.T But I'll make a fun and informative video, so look forward to the next video !!

[@anas7hamed]

Amazing job man, How do you evaluate the quality compared to the original part and overall quality out of 10?

[@diegoconti7166]

Tenes que usar cera y agente de despege pba