How to make a Small Electric Generator

[@johnwyman6126]

Thank you for showing us this project, I've been trying to figure out how to make a very small, fuel sipping generator to charge my solar batteries after a week of cloudy weather. I can't seem to find a commercially made one. You can use a 3 phase voltage regulator from any motorcycle for a regulated twelve volts DC. If you remove the clutch, you might be able to have an electric start with a 3 phase motor controller too.

[@georgetaylor8535]

Im jealousy so proud of this guy but im not hating because i give 100% props. Im trying to reach his level.

[@pjmillah2172]

Cool. Oil your taps and drills while using to prolong their life and make your life easier.

[@justrob4586]

We’re now at a time when we can say the phrase “old hover board” 🤣

[@octaviusgalacticus2253]

Haha I just realised

[@pakistanis1782]

Cheers for this, I have been researching "making an electric generator with magnets" for a while now, and I think this has helped. Have you ever come across - Pansaiah Renowned Preeminence - (search on google ) ? It is a smashing one off product for discovering how to create an efficient homemade generator without the headache. Ive heard some amazing things about it and my m8 got cool success with it.

[@zvijezdarepatica]

This was great, been searching for "domestic electricity generation" for a while now, and I think this has helped. Have you ever come across - Diyadison Penhloe Blaster - (do a google search ) ? It is an awesome exclusive product for generating your own electricity minus the hard work. Ive heard some amazing things about it and my colleague got great success with it.

[@nsukucredence1884]

😂😂

[@rcpattaya230]

Fantastic, awesome. Never seen something like that in my life. 250Watt DC, ranging from 30 to 80Volt, no AC. Wow, that is the greatest project on KZbin. I'm sure my comment will now be #1.

[@MrSahabib]

Hi. Good job. you can increase the output voltage by substituting the pulleys, the big pulley on the engine shaft and the smaller one on the electric generator.

[@Teknopottu]

Way too much RPM:s for that hub, would not last long.

[@Alexander12547]

Ya that's what I was thinking maybe not a straight switch maybe a 2-1 this looks like a 1-16 😂

[@blendpinexus1416]

this is pretty damn cool. i got a small harbor frieght predator engine and used an old car alternator which fed a led acid battery bank and a power inverter. was a crude setup but it worked well for keeping some critical appliances running when the power was out. woking on a smaller more refined setup with a better engine+alternator setup and lifepo4 batteries. (for on the go power just get something like the jackery units and have a generator recharge that if you need to)

[@MrDingaling007]

what RPM does the hoverboard motor spin at for 250Watts output?

[@jsmokzalot9238]

I need to put a 1200 watt 12v car amplifier on my 150cc gy6 moped.... Is this possible with what the stator it currently has? 8pole stator. No headlights being powered, no taillights, brake light etc. Just want to power 2 6x9 200watt speakers, a 1200 watt car Amp and a small car stereo. All 12v. Is this possible without having to do any major modifications?

[@AK-kv7wn]

This is the best video and I liked it. One request please ,can you make a DIY with a minimum sized petrol engine charging directly a ev battery. And products that you use should be also available to us.

[@manickn6819]

Excellent. I was considering using a car alternator and replacing the energised coil with a set of magnets from a few hard drives.

[@roynelson7613]

There has been a lot of things in this world I never did understand and electrical and those components is definitely one of them we need people like you in this world bro Keep On Keepin On man always a big UPS👍👍👍👍👊👊

[@electronic7979]

Excellent project 👍 very good

[@Benzturbo_rmutt]

DC VOLTAGE OUTPUT?

[@MiniDavila]

What if you use the small sprocket on the generator and the large sprocket on the engine and leave the motor in idle?

[@ProjektHeld]

Nice Project, I love these hoverboard conversions!

[@assoulnabil1372]

hello sir you have a study for a generator with smart drive motor for coupled with a hybrid inverter

[@MakeStuffwithLittleDevil]

what is output volts after that motor

[@emilzatopec7000]

no supera los 30 volts y por el calibre del bobinado debe tener una corriente no superior a los 5 amperios...mucho gasto de combustible y poca generación de energía eléctrica, es decir, poco eficiente.

[@priyanshiwazir8753]

Which soldering iron is best portable

[@jimford3882]

Nice build

[@qiplayer]

How do you know how to match the engine power and the generator capacity to make something useful? Some hints?

[@jakestar2152]

The link for the engine isn’t working.

[@Chowdam.Raghavender]

What is Out put voltage and amps

[@jesusisalive3227]

What wattage are you getting?

[@messygaragetinkering]

Would this engine be strong enough to power 2 hubs?

[@DIYKingSaM]

Yes it can but we need to double the gear ratios and make it run at full throttle. That will definitely make it heat up alot faster.

[@AliHassan-mh2gh]

Can we run car compressor with this engine

[@chamilarobert6009]

What is the max AMP can be drown from the Hoverboard? at least 30Amp?

[@rhiantaylor3446]

The typical hoverboard uses a battery pack which can deliver 15-20 amps but if you gear it to output about 30 volts at the max power rpm of the motor which might be 7500 to 9000 rpm and then use a buck converter rated for 20a input at 30V and >30a output you should be able to get over 30a output at 14V so you should be OK.

[@arsenioegoytorogiguinat2826]

Sir you didn't show to us how you modified the wire connection inside the hover board when you take out the electronic circuit inside the hover board.

[@shaungarbry88]

Nice build! Clean craftsmanship. How many amps does it produce?

[@drsatan7554]

He gives the watts and voltage. You can figure it out

[@jesusmariarodriguezolivarr2477]

Como el calibre de las bobinas es muy delgado no da muchos amperios

[@DigitalN8v]

Those are mosfet..??

[@nitroboom1282]

You need a governor to regulate the speed the gas engine because as the load increases he resistance of of the generator makes it harder to turn o the speed of the engine drops so in real generators they use a mechanical governor to increase rpm to compensate for the load

[@davidkerrigan3095]

Brilliant ingenuity. Just two issues I see - how to keep the chain lubricated and how to keep the chain tensioned at the top (as it bounces quite a bit). Otherwise ingeneous idea!!

[@gowthamgowda9327]

Awesom work .. Brother please make a home made wind turbine project video...

[@MegaTUHAU]

How many amps max ?

[@jynkotech]

Salam Where to buy cheep useable hover board for projects

[@spideyff2936]

There is no link of engine in description

[@BoHolbo]

It looks like the type of engine that is used on weed whackers..

[@DIYLabs]

Great video Keep up the good work

[@aU_tHe_sLaYeR]

First of all you should remove the clutch in engine and direct propel the generator and use a governor (speed controller) i.e over loading..it increase speed automatic and stable the power...and fuel efficiency tooo.....

[@RK-nl1hn]

How much power does it generate?

[@nambardaarnm5972]

Good work 👍👍

[@maatiraouki9124]

excellent

[@garylanders1470]

If you ask me you have your sprockets backwards. Large should be on the motor and small on the hub.

[@azizaviation]

can you produce consistent 14 VDC and over 30 AMP ?

[@changtimwu]

Amazing! Surprisingly a motor from hoverboard could be a generator. I just wonder how efficient it is.

[@POULPY47]

Every motor can be a generator .

[@Rafaeljotiar]

What about the wattage?

[@soulmortal142]

How much gasoline is consumed for 1 day?

[@CanalSHAWBE]

Parabéns amigo bom trabalho 👍👏

[@dineshpandya7600]

कोई भी चीज़ के बारे मे प्रैक्टिल से बताते है ,तो जोरसे संगीत बजाना हि जरुरी है क्या?

[@mustakinin2000]

hai bro please clarify me, the BLDC hub motor will generate DC current only but you are explaining AC current. give a link if you have any video about that.

[@raselchowdhury6055]

Can I use bridge rectifier from aliexpress. Then how many ampere and volt need to used

[@HA0052]

I like your creative idea 👍🏻👌🏽

[@cazkeymekam6427]

This is pretty cool. Was hoping you were going to charge the hoverboard batteries with it though.

[@joeblow7374]

This clip is of the type "how to make a match out of a log."

[@presidentofallfoodnice8113]

Exactly

[@CreativeExprimentSudip]

Excellent bro👍👍

[@enginemaster01]

That was awesome bro. I'm looking forward to watch more

[@djimini2relaxsound518]

1:22 LOL so funktioniert das nicht die schrauben schleifen an den copper coil da ist nicht genug platz

[@kfb6462]

How much volt out dc

[@nevillecreativitymentor]

Excellent project ...very useful for my project ... After my project is done I will be giving you credit (will take about a year ...but still!!)

[@casparpaarlberg9560]

Finished now?

[@nevillecreativitymentor]

@@casparpaarlberg9560 NOOOOOOO ..but it was awesome of you to note the ONE YEAR Fact of the matter ... the project was attempted ..but COVIDs financial impact on my life has been full and total. Meanwhile ... how is your creation running ? Still works ?

[@cvspvr]

​@@casparpaarlberg9560hello, fellow caspar

[@Freefree.10021]

I missed your video to search curious to make but I am government school students so I don't have much money. In future i made ❤

[@ProlificInvention]

I wonder if you could run a hub motor electric bike off this, It could sit out over the rear tire on a newspaper carrier and give you the option of highly extended range and battery charging at idle and braking times with the right electronics. Allowing for extended powered rides...

[@deathuponusalll]

Prolific Invention brilliant idea!

[@YEET-yh6qc]

If you had those the torque could come from the electric motor and the ongoing speed could come from the weed eater motor making the most efficient motorized bicycle. Idk if i would use electronics maybe a more mechanical approach first just to get the idea rolling

[@ProlificInvention]

@jujitsuman68 link to a video?

[@cvspvr]

this has already been invented. it's called a motorbike

[@magic5554]

Can we use fan

[@Marcos_Ledinich]

Great build thanks for sharing very clean!!

[@retsetman9698]

Woow .Awesome working my friend

[@BCreativeDIY]

Great project. What is happen with rotation speed when electric energy consumption is changing, do you have a loop back control ?

[@HobkinBoi]

He was just playing with the throttle control himself. But I imagine you could create a governor to either maintain engine speed or voltage depending on what you're looking to do.

[@KIRBZVIDS]

Would this carry enouth current to use a inverter off of it ?

[@markclinton3782]

Hi, The smaller gear should be on the electric motor and the bigger gear on the gas engine. To get higher speed

[@stevenkraman1646]

Very impressive you are talented. A quicker and easier way to get a generator is to go buy one at Harbor Freight for $89

[@arroberteqgpv1506]

Can we using car alternator?

[@m.irfanbasharat4480]

Incredible work👍

[@telmanmikayilov]

thanks bro 👍👍👍👍

[@createvitesanthoshpatil]

Very nice work. Super 👍👌

[@pardeepsingh-jq5lk]

Which motor is best 775 or 895

[@DIYKingSaM]

775

[@juanluisramirez6895]

nice idea brother

[@octaviusgalacticus2253]

WHAT HAPPENED TO THAT HOVERBOARD

[@PMF3d]

Why did you reduce the generator speed?

[@DIYKingSaM]

We need to increase the torque produced by the engine to drive the motor

[@PMF3d]

@@DIYKingSaM you reduced it on the generator!

[@f4tboy99]

​@@PMF3d Same principle as a bicycle, to have more power to the rear wheel you reduce the front gear and increases rear wheel's gear.

[@PMF3d]

@@f4tboy99 the motor is on the bearings, it easily rotates, why increase thrust?

[@elguibermunoz1855]

Buen día, cómo se llama el circuito

[@burntberry8651]

Are Hoverboards old now

[@MCsCreations]

Pretty fantastic work, dude!!!! 😃

[@novaknovakovic1585]

This is just superb, I been tryin to find out about "how to create your own electricity" for a while now, and I think this has helped. Have you ever come across - Diyadison Penhloe Blaster - (do a search on google ) ? It is a great one off guide for generating your own electricity minus the headache. Ive heard some amazing things about it and my work buddy got excellent results with it.

[@SamMonkulas]

This is by far very simple technical instructions and looks very clean conversion. My only question is why put such a small gear on the Engine output, a bigger Gear would have resulted in much more output from Generator. Secondly I just wanted to know that this small 36cc 4-stroke Engine output power equals to 0.6 or 0.9KW of energy, so if you could have selected and I say IF, like a more bigger Generator with extra coils or Permanent magnets that can produce let’s say more than 1KW or even 2KW of Electric energy, then would you actually get more energy OUT than your actual Input Energy ?? Just my little dum dum question......

[@ctrlaltdebug]

No the engine would stall

[@jano3681]

Why not to use cheap used car alternator?

[@handymanbrian8269]

how come you didnt make a full-wave rectifier (AC output)? very good craftsmanship though

[@prodbyree]

This guy sure payed attention in school.

[@prodbyree]

Nice video btw

[@AmplifiersPh]

Good job.

[@Pistolonly1]

Yes, sure it can generate the voltage, but you didn't show us the max current .

[@alexhamilton714]

I would love one of those boards how much you will get it to me for 🙏

[@theninjaneer7885]

I'm trying to order the pcb, but i dont understand how. any help would be greatly appreciated. thanks

[@primusjohn8585]

Good job sir

[@javidahmadmir5842]

Real DIY KING

[@dkvlog7716]

Can you how to get make cycle in to. Bike using this 36 cc engine

[@ARMENAMERIKANE]

Genius I love it. Can it power LED maybe low voltage POE lighting?

[@miketully9592]

It'll blow out of Bank of LEDs Up to 50w

[@bendabolehbuatlain9988]

Why not the spocket@gear use big on engine and small on coil, and disable clutch on engine. Slow rev high spin on coil. Save fuel. Just a suggestion.

[@jamest.5001]

Have you tried to spin one of the bldc motors, just shorting 2wires, its nearly impossible to spin by hand, short all 3. And it's basically impossible. It would likely not have the power to spin it with such a overdrive , 750 watts is basically 1hp, with losses , it will take 2-3+ hp to spin this at full power!

[@ezekielezekiel011]

Peut on acheter ce générateur ?

[@jorgemdk5608]

Yo creo que el clutch centrífugo sale sobrando

[@RockCrushing777]

Good project...dont leave gasoline too long in a clear plastic bottle..it will dissolve it and put clear round spherical plastic parts in your carb.

[@rudolphtaylor352]

Hey DIY King it's my dream to build a self running /looping 24 v generator. Can you please ?

[@conker33350]

I like the video a lot I just think the music is kinda annoying. Awesome stuff you have some skill lol

[@davelowe1977]

WHAT CURRENT?

[@williamkunte5361]

Can it power a wrist watch though? 🙄

[@chuckeynewkirk199]

Again I wish I had electronic skills mechanically I'm inclined for sure thanks great video

[@minecraftpro_4313]

dude great job i made it myself it good thanks for good feedback vid!!!

[@kike4353ttdg3]

No conocia tu canal y me parece muy bueno enhorabuena 👍