I love that your designs are functionally sound and of good design without getting hung up on fancy anodized pieces or brands of this or that. As far as creativity goes, your videos show you as a master of RC and innovator of practical design. You make everything look so easy... to follow, but to innovate is something else entirely.
@johnepperson88677 жыл бұрын
You are so skilled & with GREAT imagination & ingenuity!!!!! Thank you for all that you do!
@thomaspigg3067 жыл бұрын
Exhalent job! It seems like it "get's up & goes"!!!!!! Keep'em coming!
@darktarioth7 жыл бұрын
You should run a multi-channel transmitter and setup the throttle to mix with the steering input for differential thrust to improve handling.
@plaidjunky6 жыл бұрын
The freshest tracks to the freshest builds 💯💯💯
@sergejnadazdin22347 жыл бұрын
you might need to secure the ESC to the boat with double - sided tape, because the ESC can get pretty hot, and un-glue itself.
@davidrivera68397 жыл бұрын
Sergej Nadaždin it needs 2 part epoxy
@राजूडेठाणी5 жыл бұрын
इस छड़ 😇के 😉😡 👚👢👔ष 😥 😧😴😣😣😉प 😨👷👷👷अपनी पत्नी को एक
@राजूडेठाणी5 жыл бұрын
इस
@राजूडेठाणी5 жыл бұрын
दोचटचीखडसशलदृओचछ
@crazycreator77856 жыл бұрын
awesome video very cool and good videos you make I love your channel most
@modelnutty65037 жыл бұрын
no meanness intended at all, just one of those jets will run a hull that small the same speed and battery will last almost twice as long. very nice material you get to work with, I do hope your hull forming becomes more advanced, it does take a little more time but same hardware can gain speed and handling both (shallow V). this is tricky, wrapping aluminum tubing for cooling coils onto something slightly smaller diameter than the motor (it springs a little!) without kinking the tubing, much better conductivity.
@FrankypankyV87 жыл бұрын
Cool boat... lovely video again 👍
@mirocapin47595 жыл бұрын
So fu.... great. You are really showing that You can have fun both with building and driving without great cost. Congrats!👍👍👍
@Duboyrc7 жыл бұрын
Fantastico me gustan tus trabajos mucho
@robotteck7 жыл бұрын
This weird looking boat is stupid fast, great job. What is that aluminum composite stuff? Never heard of it.
@asim_m017 жыл бұрын
the red paint looks dope
@Lander767 жыл бұрын
Great job, can I ask what kind of wire you are using to link the servos? And what is the thickness of the aluminium composite and foam?
@franciscohumbertocanocasti536 жыл бұрын
Hello my friend I congratulate you are great your videos and especially the projects you do, honestly very simple but I am amazed by the ease with which you do everything that seems very easy, I would like to know more about this technology I apologize for bothering you with the following questions, I do not know much about this, but I want to learn. I have 2 motors of 1HP 12V DC 800 Watts 70A approximately at maximum power 3000 rpm, that I want to operate to remote control, what do you parts recommend to buy for to be able to control speed and rotation (forward / reverse) Thanks Greetings
@CreatingCreations7 жыл бұрын
The boat looks funny when it bounces in its wake:)
@angryakita38707 жыл бұрын
What did you use to waterproof the servo that changed directions
@iliuhahaha3 жыл бұрын
Good idea, water cooling 👍
@sahil7417 жыл бұрын
dude you can actually open a toy store of your own ! great 👍
@MCsCreations7 жыл бұрын
Really, really nice. :) I think that if you put more weight it would be even faster! And jump less. ;)
@edstar837 жыл бұрын
Santa needs to get you a 3D printer for christmas.
@mdsamratking94644 жыл бұрын
Nice sharara bhoot 👌💪👍🦈.....
@jameelaanjum65206 жыл бұрын
Which is that thing that u used for connecting servo at 7:01 min plz say me where did u get that
@MonsterPartsRc7 жыл бұрын
Wow! That really GOES!!
@keymaster21087 жыл бұрын
how efficient are they? I would like take on a kayak project
@arctic_angel74084 жыл бұрын
so does the paint protect it from the water?
@angryakita38707 жыл бұрын
is it possible to use pvc sheets instead of aluminium composite
@tylergoldsmith48843 жыл бұрын
For a self propelled boat could you just attach the motor straight to a battery and leave the servo part out all together ?
@yaoyao9499 Жыл бұрын
great boat and it is super fast surprised me
@ernestorodriguez66247 жыл бұрын
I can't find the same aluminum you used, the ones I've bought are very hard to cut, can you please tell me where did you buy that aluminum? Please I will appreciate it.
@ridermak41116 жыл бұрын
When that cartoon lookin chubby took off at 13 seconds in, I exploded in laughter!! In its own way, that is the coolest, most fun little rc booger on the tooob. 🤘🤙
@mr.engineear09874 жыл бұрын
HEY! YOU CALL THAT CREATION CHUBBY AND BOOGER!? EAT SH*T!
@cebongituantekpekai92624 жыл бұрын
Om, mohon cantumin pembelian turbo jet dimana, dll sebagainya. Oiya om, boleh usul ?? Kalo 2 bh turbo jet, bikin kapal model catamaran dong. Thanks and sukses selalu om.
@michaelupton15037 жыл бұрын
the green board material. can you post a still of it somewhere with a link. I'd like to find a local source for it. Thankyou! Cool build.
@jordonwinchester48427 жыл бұрын
I think that you should start putting a V shape hull on your model boats, they will ride much better.
@rcsendandblast15796 жыл бұрын
Where do you go to buy your RC gear. The sites in your description box don't go anywhere. But one. It pops up showing a small part. What I want to see is the engines and where to buy them. As well the rest of the parts.
@eragonshadeslayer17 жыл бұрын
does it matter what size motor you use or could you get a much bigger motor
@Vikashgupta772-o5x7 жыл бұрын
bhai kya aap bta sakte h ki kya kya sman kharidna padega or ek boat banane me kitna kharcha lagega pls reply fast
@faithnomore68767 жыл бұрын
i was just wondering cause i couldn't tell what did you use for the motors?
@laflaf3d7 жыл бұрын
Hi, where you find the "Turbo Jet Motor " ? great video!
@bylike71674 жыл бұрын
Amazon
@rituupadhyay8657 жыл бұрын
hey KST what is that golden colored thing that you added to the turbo jet motor in the video of making a RC boat with twin turbo jet motor ???
@NawiChannel7 жыл бұрын
kern videonya nya. saya benar benar terinspirasi dari video anda.
@migzandamon75317 жыл бұрын
Am that men is a electronic.....your build so nice I like it ; ) 👍👍👍👍👍.....
@benjik92947 жыл бұрын
Will it not break if it gets wet?
@damienlamy605 жыл бұрын
nice build
@mamanggti75027 жыл бұрын
WOW YOU REPLY MY COMMENT IN VIDEOS UPGRADING WATERJET
@tomiadebanji42267 жыл бұрын
It is so fast and all your videos are cool
@ashokmhatre2857 жыл бұрын
very nice boat
@joaopedrobeltramemoreira88576 жыл бұрын
Mano acho seus vídeos o máximo mas eu preciso saber onde compra os motores dos barcos
@Jmg23619817 жыл бұрын
Hello, please can you specify links where do you buy KT foam and aluminium composite and measures, specifications? thank you very much.
@asadkhan-de4lx6 жыл бұрын
what are the mesurements or scaling on foam of ship?
@youhendriksilaban32563 жыл бұрын
I like your channel, can you tell to me, where is buy the tools?
@mvmves8037 жыл бұрын
You have my support Bro...!!! And I am also subscribed to your channel... Keep it up...👍👍👍
@thesatanicridermotovlogs17727 жыл бұрын
I suggest putting a small dorsal fin under it to help it turn
@terrandroid7 жыл бұрын
oh I like the jet motors, you can make some cool stuff
@pavelvlasenkov64137 жыл бұрын
hello friend... I have a question.. you use 2s battery 7,4v , .........can I use 3s 11,1v with same set?
@victorjoao15065 жыл бұрын
Queria saber onde vende essas coisas pra montar aqui no Brasil
@VishuKochhar7 жыл бұрын
Awesome you are very creative guy
@I_CHULBUL4 жыл бұрын
What a super sonic speed 👌😍
@tomg89937 жыл бұрын
Cool...Also sounds good
@rituupadhyay8657 жыл бұрын
hey KST can you add a link to buy that golden colored thing and that battery ??
@FuadPhenomenon7 жыл бұрын
can you make a video on how to make an rc sea plane?
@Anilkumar-kn7ty5 жыл бұрын
Nice work
@yaoyao9499 Жыл бұрын
did you use cupboard for the boat
@shaliini_dey7 жыл бұрын
Could give me that infusion cooling set..... How did u get it
@thetusimondal12326 жыл бұрын
verry good from where you buy the water jet
@easygameryt58826 жыл бұрын
Cool i love this speed bot
@wtfquebec7 жыл бұрын
lol i'm pretty bad in electronic ... i love your work .. keep up man nice vid
@MrRamAir17 жыл бұрын
that is awesome keep up the good work
@sushilpadole697 жыл бұрын
im your biggest fan than anyone
@MrPinolatino7 жыл бұрын
ottimo lavoro!!!
@meenalrai79976 жыл бұрын
Hey dude from where we can get the aluminium composite. Cane we get it for any online website
@omozaas7 жыл бұрын
hey please tell me where can i get that remote and receiver ????
@sankeyphillip64616 жыл бұрын
Hi there I watch lots of your video but find it hard to get the parts is it possible to post up link where we can find them on eBay so I can buy them to start my lil hobby thank you very much
@RaduBrujban7 жыл бұрын
whare can you find the y cables for the ESC. PLEASE HELP
@asadasif85727 жыл бұрын
do i can use rc helicopter servo and motors please reply
@TechyChung5 жыл бұрын
What's the dimension of the boat or aluminum sheet being cut ?
@dinanathmahato36127 жыл бұрын
How much load does the 2 turbo jet can take ?
@sanderromer64905 жыл бұрын
What is the difference between the 2 glues?
@AndrewEthans7 жыл бұрын
in america you dunk ball into basketball hoop, in soviet russia basketball hoop dunks YOU!
@josecarlosdeandradecarlos85816 жыл бұрын
o que vc usa para fazer as bordas do barco. (it White)
@deevisreedevi5 жыл бұрын
How did he make the water flow through the tubing
@hamzaguney17 жыл бұрын
Ya devrilirse, ters düşerse, kendiliğinden düzeliyor mu?
@chrisdorio67507 жыл бұрын
Very cool.
@everythingcreative53337 жыл бұрын
hats off to you man............... 🙏🙏🙏🙏
@Daffach256 жыл бұрын
good job men
@combactnerd43506 жыл бұрын
U make very good rc items.... Could plz send me this boat... I love it a Lott... Dont have enough money to buy all that...
@soubhiksen72427 жыл бұрын
VERY NICE WOW!
@9vj7 жыл бұрын
Very excellent continued👦👍
@waisha6 жыл бұрын
Will that water cooler really work?
@ravishivade83485 жыл бұрын
Can u make a video on all rc boat such as racing
@eragonshadeslayer17 жыл бұрын
did you spend roughly $300 on the electronics?
@amritswagatadityaraj11116 жыл бұрын
Sir please tell that from where you have got the Turbo JET motor
@ShubhamPatel-jl2tt6 жыл бұрын
Can i get all this stuff online? If yes please send the link😯
@chipmarak64125 жыл бұрын
Sound pretty cool to hear boom💥
@Ev0ltion7 жыл бұрын
Way too flashy but great job with everything else :D
@RobbieGarciakawasakininja650r5 жыл бұрын
How do you ever charge the baterries without opening?
@lonnieeggert43496 жыл бұрын
This must have been a really expensive build!!🤑🤑🤑🤑
@juanjosegarciaalonso74187 жыл бұрын
Se puede usar para un avión con motores vectoriales?
@giovannicaronte63307 жыл бұрын
Where do you buy the components that you use in various video? You can put a link?
@angryakita38707 жыл бұрын
giovanni caronte link in the discription parts are bought probably on banggood.com and ebay