Tips and Must-Have Tools for Small Shops

Power strip: amzn.to/3uTjbE7
Evapo-Rust: amzn.to/3T34N4e
Disclaimer: Tested may earn an affiliate commission when you buy through the links here.
Does Adam Savage have any suggestions, including tools, for small shops? Would he recommend putting wheels on a lathe? And any tips for rust removal? In this live stream excerpt, Adam answers these questions from Tested members @crimsonchained, @joshuadrum8313 and Leon M, whom we thank for their support! Join this channel to support Tested and get access to perks, like asking Adam questions:
/ @tested
Subscribe for more videos (and click the bell for notifications): kzbin.info_...
Tested and Adam Savage Ts, stickers, (de) merit badges and more: tested-store.com
About Tested: www.tested.com/about
Meet Adam in Person: www.tested.com/events
TikTok: / testedcom
Instagram: / testedcom
Twitter: / testedcom
Facebook: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Intro bumper by Abe Dieckman
Thanks for watching!

[@tested]

Power strip: amzn.to/3uTjbE7 Evapo-Rust: amzn.to/3T34N4e Disclaimer: Tested may earn an affiliate commission when you buy through the links here. With thanks to Tested members @crimsonchained, @joshuadrum8313 and Leon M, for their support! Join this channel to support Tested and get access to perks, like asking Adam questions: kzbin.info/door/iDJtJKMICpb9B1qf7qjEOAjoin

[@LordDarthSmyth]

Where do you get the bendy clip thingy-ma-bopper that is holding your phone? I've seen them in other videos here and have alway wondered where to get them. Looks like something I could use for my artwork.

[@caseysmith544]

Yearly or Bi annual maintenance on your shop and what you do like an overview of all things needed to do for maintenance of tools and things running tools in new layout would be cool if any is more then Bi annual you could elaborate why it is needed or should have been done before. I know you have a few tools more easily accessible for said maintenance as well as a shop tool back.

[@DonariaRegia]

A good source for workbench material is old semi trailer doors. The ones I used are 1-1/8 inch thick with two fastened together for a 3-1/4 inch thick benchtop. You can choose the ones with metal sheathing or the type with a metal frame that can be removed for a wood surface. You can make a giant worktop or cut them to fit smaller shops.

[@paulprobusjr.7597]

Project Farm found a product that was better than Evapo-Rust. Can't remember what it was, but it was a video from a couple/3 years ago.

[@MofoJuto]

Semi Doors sound great, where do you find them???? @@DonariaRegia

[@j.r.millstone]

If you're setting up a shop in your basement, don't overlook air filtration. VOCs and dust will absolutely find their way into the rest of your house if you don't have ventilation and filtration.

[@oem42]

Not just that.. But many VOCs are also heavier than air (natural gas too).. So any leaks will head for the basement

[@j.r.millstone]

@@oem42Yep. which is also how they circulate throughout the house. Because most furnace intakes are closer to the ground so the heavier concentrated VOCs get sucked in and pumped upstairs. Assuming a forced air furnace is installed.

[@matteout_woodworking]

@@j.r.millstone It's not just that the furnace is in the basement. Heavier air will want to be pushed by a fan way more than lighter air. It's a density thing so when you are pushing air usually it will take on the heavier air first.

[@ChristopherFerguson]

Got any recommendations?

[@matteout_woodworking]

@@ChristopherFerguson there's a bunch of options out there if you go and look for them. There's also paint booths for miniature painting and air brushing. If you do bigger things there's inflatable paint booths that are big enough to fit cars. You can change up the air in your basement pretty fast with just a good fan in a window with another window open. You could get fireproof filters to filter some stuff out so your neighbours don't get mad. I've seen some pretty big furniture finishing setups in this way. A corner office was converted into a paint booth but you needed to keep the doors open.

[@RowanHawkins]

I put this in a reply, but realized it really wants to be a top level comment. In every parts drawer put a small card with how to get more of that part, optionally how much you paid and how long ago. That way when you run out, any shop helper can order more and you no longer need to keep that detail in your head. Putting the price helps you figure out how much a build cost if you need that detail and if it took you 2 years to use the stock, then maybe order less next time.

[@mrwoodandmrtin]

I have a "suppliers" notebook.

[@The_Bearded_Lady]

Love this idea!

[@rupe53]

Did fleet work for years and when restocking, I always tore the end off a box and stuck it in the drawer with the parts. Ok, that was 50 flat washers, 3/8" uss, plated, 10 cents each.

[@mrwoodandmrtin]

If you pit wide sellotape over the box end first it survives the scuffing and dirt from the years of use. @@rupe53

[@25aspooner]

A large, quiet air compressor is one of my best shop purchases.

[@tonyennis1787]

Do quiet compressors exist?

[@matteout_woodworking]

I have a 7 HP air compressor... I think a large high volume air compressor is the best and if it loud then put it outside build a shed around it... Insulate the shed and put a small baseboard heater in it. I have no regrets of putting my air compressor outside.

[@TheMattwasherein1992]

also adding a shop vaccuum. best purchase i made for cleaning up at the end of the day

[@naseausderhuette]

California air tools! They’re great and room volume

[@jarredstumberg]

@@naseausderhuette absolutely! "hot dog" style compressor, beats the heck out of a pancake style one that's way louder. My CalAirTools compressor has wheels and it's so easy to use it in the garage but also move it into the house when needed without dinging up the walls or trim. Oh, and don't forget the air filter and rubber hose.

[@1ericedwards]

Additional recommendations for setting up your shop: Get basic PPE/ safety equipment: a fire extinguisher, a first-aid kit, dust masks and/ or respirators, work gloves, disposable nitrile gloves, safety glasses and or a face shield, ear plugs and/ or other ear protection, steel-toed work boots, and smoke and carbon monoxide detectors. Set up your shop with proper ventilation, whether that is with cross-ventilation (which is more passive) or forced-air ventilation (which is active). If you will be spray painting frequently or doing similar processes that make fumes, install a spray booth. If you will be sanding or doing other work that makes particulates frequently, install a down-draft table. If you will be storing solvents or other harsh chemicals, install a locking steel safety cabinet to store them in. And last but not least, a Shop-Vac is your friend. Hope this helps! 🙂

[@mrsansen8619]

To quote a friend "add lights until you begin to actually tan". If you EVER are gonna paint anything, you want the lights.

[@ctrlaltdebug]

High CRI lights if you want accurate colors.

[@snafu2350]

..& when installing the lights, do so from the perimeter inwards. This way you can be sure that when you're standing at a workspace near the wall, you're not casting your own shadow over the workpiece! This goes for kitchens, too! :)

[@ssskids123]

Another cheap workbench surface is a used (flat) solid core door. Ask remodelers or restore people as well as Craig’s list. A door, two saw horses, and a couple of long wood screws to hold them together make for a quick flat surface to get started with. Put another board across the base of the sawhorses with some sandbags to help hold it down. Eventually you’ll want something that is sturdier, but if you can find a cheap/free door, this is not a bad way to get started.

[@classiccycleconnection9334]

I have an old solid core door that somebody covered in Formica (?) on a wood 4x4 base and legs . It will hold a small auto engine with no problem. It’s about 30yr old now.

[@ladykay8]

I have 6 of these! Best, cheapest, most rock solid thing.

[@Mighty_Atheismo]

And its gotta be solid core!! My "bench" while I was making my for real bench was two hollow core doors. As my clamp collection grew they made the doors sag about a half inch and I've punched thru the veneer faces doing workholding.

[@grant5227]

Those long power bars are awesome. My workbench has a 6ft long one that runs the whole length so there is always an outlet right where I need it.

[@fredinit]

Agreed - I put two long (48") ones on the back of my electronics bench (which is on wheels) to plug in meters, scopes, electronic load, signal generators, soldering station, etc. Two more shorties like Adam displayed on the bench ends for random things that need to be plugged in. I also invested in short power cords to keep that disaster to a minimum. Now to clean it off so I can actually do something ;)

[@mattheweaton9470]

They're pdus if I'm not mistaken? We use them for server cabinets

[@danielstickney2400]

One caveat about Evapo-Rust: It is ineffective below 60 degrees Fahrenheit. It still works but it takes months to see any results. So you either need to keep it at or above 70 degrees or have the patience of a saint. A power strip with individual switched outlets and a built-in USB charger is just the ticket for a charging station.

[@chrisdonnell7200]

​@@BanterMaestro2-vh5vnI've never seen one zap a phone, but almost universally they're minimum standard (or below standard) power, so they charge atrociously slow or fail to even charge.

[@danielstickney2400]

​@@BanterMaestro2-vh5vn I agree about phones but there's a whole plethora of work lights, headlamps, and other small shop gadgets that use USB charging these days.

[@noahhorst8288]

I live in Colorado and I can attest to this! It didn't work at all below 60. To be fair though I was trying to do my garage shop during the dead of winter and temps below 30 😅😅

[@stevenbergom3415]

When it comes to workbenches, buy a cheap one, use it for a while and take notes about what you like and what you don't. Then build your own. I built a Nicholson-style bench (ala Paul Sellers) and I couldn't be happier. Chris Schwarz has written several books on wood-working benches that are very helpful. Also make sure to have a bookshelf for all the books you will inevitably buy.

[@mm9773]

I second that very much. Except Chris Schwarz has crazy ideas about workbench height - but that’s another reason why it’s a great idea to buy or build a cheap one first, that’s by far the best way to really find out what you want and need.

[@1pcfred]

Not everyone is a woodworker. Sad, I know. The truth is woodworking is a cross discipline for any other activity. Even if what you do is sew you can still use woodworking to compliment that.

[@obiworm99]

@@1pcfredthis is very true. I do canvas and upholstery for boats, and I’m realizing that I really need to upgrade my woodworking equipment. Our shop tables are huge, like 8x 20 ft, and we end up using the picnic tables outside for sawhorses 😭

[@1pcfred]

@@obiworm99 I've seen some sturdy picnic tables that'd make fine workbenches for rough carpentry. That kind of work typically is done just on sawhorses. The next step up is a workbench with a wood vise on it. I have 3 wood vises that have cost me the combined total of two dollars. All of that money went towards the one vise I bought at a flea market. The other two I made out of stuff I'd found. What I'm trying to say is you don't have to break the bank. Although if you want to that route is available too.

[@DasGanon]

Literally just bought a workbench from Hazard Fraught for $175 which has tool holes and a built in wood vice. Seems solid enough for a 5' x 30" surface.

[@NRay7882]

Holy crap, Adam went ham with the Sortimo storage boxes!

[@zachmoyer1849]

yeah lol his last vid is about starting the bulding of the ones on the right of him (his left) they all are on drawer slides im guessing next video will be about finishing them

[@theHardChargerVids]

probably replacing all of his old storage boxes that are not the Adam Savage branded orange Sortimo's they made for him. which is probably for the new drawer system he is working on.

[@RowanHawkins]

Yep 15 units high. Though frankly I would have made more cabinets and kept the sortimo between knees and shoulders. Then floor height tools or loose stock could live under there and you would never have to bend over too far for small pieces. I'm going to add something I saw in a completely unrelated video and that is in a drawer put the supplier for where you got the thing so that when you run out you have a little card to look at that lets you go get more. That way you don't have to remember all of that stuff.

[@C3DPropShop]

​@RowanHawkins if info/reorder cards strike your fancy, look into kanban systems. It'll change your world

[@Mighty_Atheismo]

You should see the one where he keeps his various lengths of wire!! So cool

[@LarryRobinsonintothefog]

Back in the 70s I was worked at a TV repair shop where the boss had placed power stripes on all of the benches where we could plug in test equipment & televisions. It was nice and well thought out.

[@scottderyck1467]

as a kid I was spoiled, my dad bought a diner's countertop and he put it against the back wall of the garage. and he bought a couple booth table tops we would put on saw horses.... they were FLAT so I used them when building model airplanes etc. plus if i needed a tie down point I never worried about putting a small hole for a wood screw in any of it. At one job we would make tables to build small weldment machines. One end would be a 3/4 to 1" thick pc of steel 1 foot by 3-4 foot wide. the other end would always get destroyed and we didn't want a metal top so we used particle board and when it got really messed up we just replaced the top. It did suck to loose all the battle scars. We did drill holes in the steel tops to hold vises and to put parts on to drive pins through, they were great and built to drive tanks on.

[@angeldelvax7219]

About power in a workshop: if you can, try to get an extra breakerbox. You're going to trip breakers a LOT, and if you have a separate box in the workshop, you can more easily split power for tools and light. Especially in a basement, you want to make sure you ALWAYS have light. Just for safety!

[@srmofoable]

If you are tripping breakers then you are doing it wrong. I'm not sure I have tripped a breaker with the exception of accidently shorting something or running a crazy long extension cord.

[@Lyoishi]

There are breakers you can get outside of breakerboxes as well. I have a breaker on the power strip.

[@fredinit]

If you're in the basement - keep a flashlight handy. Lack of power may do to something other than your own efforts.

[@jimb1713]

I keep lighting and dust collection on one 15a breaker. Power tools are run on their own 20a (table saw, jointer, planer, corded sanders). In a single person shop, that’s enough since I don’t run more than one large tool and dust collection at a time.

[@westrim]

Also, decent cable management so you don't break trippers.

[@justinknash]

My small shop must haves: - hot glue gun - dremel tool - Irwin quick clamps - Duct, electrical, and gaffers tape - Electrical / rubber mat to work on - Pegboard metal wall organizer with accessories

[@mikealbrecht3990]

Lumber liquidators have solid wood countertops. You can pick up returned ones (or ones damaged in shipping) at the showroom. I priced oak for a workbench countertop and the walnut one they had on the floor was cheaper, and it saved me loads of time.

[@TomTRobot]

Happy to see you showed a power strip that has the outlets perpendicular to the length of the strip. Folks should be told to avoid the cheap plastic ones that have the outlets in-line with the length where the cords get in the way of their neighbors. In these days of "wall warts" having a wide spacing between outlets makes a big difference, too. A nice four-foot power strip at the back of the bench is very convenient, and leaving some space to allow excess cord to hang down out of the way. For a workbench that's up against a wall: consider including a lip or board barrier at the back of the bench to stop those small rolly parts from rolling off the edge and behind it. Similarly, design to leave space between the floor and any supports, shelves, drawers, etc., so you can retrieve any small things that roll under. Because as we all know from Murphy, dropped parts naturally seek the nearest object they can roll under or behind. A corollary is that spilled liquids will also seek the nearest thing they can seep under. So think about what you'll do if you have to mop things up, slide in a vacuum cleaner, or use pick-up tools.

[@charlesflohr1815]

Looks like a rolling chair would be a great addition, as Adam flies across the shop…

[@noahhorst8288]

Gotta have a smooth flat floor though 😅 or you're gonna have problems

[@f.d.6667]

As a designer (woodworker by trade) and workshop instructor, my advice for every small shop would be this: *HANG YOUR SHELVES FROM THE CEILING* (sorry for shouting) using 3/8 or 10mm all-thread. This way you save all the floor space and you can move much more freely around your work-bench and have space for assembling your projects etc. Also, this way you can move your machines around much more easily. Machines you have to dig out of a pile of material before you can use them won't see much use, if any...

[@GuitarWithJamie]

Thinking outta the box. Smart man

[@extremewirehead]

What kind of ceiling does this work for? Mine doesn't have any wooden studs so I'm scared for how sturdy it could be to hang things from

[@f.d.6667]

@@extremewireheadReinforced concrete in my case. I'm using 3/8 or 10mm threaded anchors and extend them with galvanized all-thread. On those rods I either hang boxes made from 3/4 OSB, 2x4in beams that hold up timber and sheet stock. You can also bolt a 2x4 to the wall, place your shelf on it and then hold it up with just two supports - this way you split the load between wall and ceiling. If you don't trust your ceiling, make a ledge from two stacked strips of OSB/plywood, held in place with a bolt/screw every 6 or 7 inches, make your shelf a little less deep than you normally would and then secure it with all-thread rods on the ceiling. or with a few screws into the wall.This way the wall will bear most/all of the load but you still don't use up any floor space...

[@StarksDummy]

@f.d.6667 do you have the rods mounted from your ceiling? If so, how are the mounted? Or should I say, what are they screwed into?

[@GuitarWithJamie]

@@StarksDummy he describes it one message above

[@michaelwest4325]

I put a power strip on the front edge of my bench, recessed back under the lip of the top, much handier to use tools on floor, auxilary work tops or at bench rather than having cords pulled across. Add one to a shelf for charging, testing gear, etc. And I use two 4-foot or one 8-foot light right over my top, plus various spots. Mount a wood working vise, then mount a machinist vise to a block, and you have a place to mix and match work holding. I have at least 5 vises that do different tasks, some fixed but the movable ones really work well. And I have a small bench anvil to use as a beating surface rather than the vise, at 9 lbs it makes a great dead weight, work holder, third hand!

[@CraigGirten]

I've got one in the front like yours, and in the back. The back is for the tools I've got semi-permanently installed (drill press, drum sander, one battery charger).

[@Darwinpasta]

I too am a man of many vises. I like your vise-in-a-vise solution, that's a good idea. I've got one small one on a plywood block that I can move around to wherever I need it, or throw in the truck and use off-site.

[@lawdog516]

Digital multimeter !!!! You can get a Fluke 101 for under $50, I use mine all the time and I have some very expensive Flukes but the 101 it my first grab,it’s small, relatively accurate and just easy to use !!!

[@NiSE_Rafter]

Ooh yeah 100% agreed. Honestly any multimeter would be better than nothing. For someone lacking funds even the freebie harbor freight one gets the job done until the budget allows for a nicer one like a fluke. So useful for electronics related projects and repairs

[@Ben-Rogue]

Tips for Evaporust: 1. Thoroughly clean the parts beforehand 2. For heavy corrosion ; scrub parts every few hours with a brush, or twice daily if possible 3. Don't leave plated parts in the fluid for more than 3 days. The plating will come off eventually! (at least zinc plating on bolts will) For remaining rust neutralization, use a phosphoric acid based rust converter. I use a Septone product that works brilliantly!

[@charleshadle9376]

I worked at Leviton and my salesman friend helped develop that massive-multiple-outlet power strip.

[@DonariaRegia]

Something that makes a dedicated shop outlet strip even more useful is an integrated remote switch. I removed one from a desk headed for that big office in the sky. The strip lives at the back of my jeweler's bench and the switch is mounted at the front under the bench. It's perfect for turning off the bench lights, radio and foot-pedal operated machines. One flick and everything comes to life.

[@VB-bk1lh]

I have several work benches myself, each with a different purpose, One made with a 1/2" steel plate top for welding small items on, one with a .60" plate steel top that measures 4x10ft for heavy work, several 3x5ft common shop benches with drains for disassembly, one 3x12ft stainless 'counter height bench for small assembly work, one wood bench made with a top glued up from 20 80" 2x6" planks glued up and milled flat on their edges to form a 6" thick solid surface for wood work, plus two 'tables' built from two 80x36" recycled doors from a local school that was torn down. Each one made from solid wood covered in maple veneer. Those are my gluing benches, set up with various clamps and peg holes. One tool I couldn't live without is a good vice, bigger is better. Another is a blast cabinet for metal prep and cleaning, plus a mig welder, a set of oxy-acetylene torches, a band saw, a hydraulic press, and an air compressor that you can't run out of air. For me, that means a pair of 10hp 120 gallon compressors. Depending on what your working on, maybe a tire machine, a milling machine, at least one lathe, and some sort of belt sander. I also put having a small refrigerator in the shop pretty high on my list as well, the ability to not have to leave at lunch time or to have something cold to drink is invaluable. Not to mention various sealers often require that they be stored cold so they don't harden up in the container, (many anaerobic sealers, CA adhesives, etc.). The ability to exchange air or vent fumes is also pretty important for many reasons as well.

[@kaptnkarl01]

Forget butcher block! The very best workbench top is a solid core door. You can find them cheap and in all sizes at places like Habitat Restore. They are very stable, very straight, and about two inches thick. You can cut them exactly to size, and, if you want, you can easily attach any other surface to them, like thin plywood, metal sheeting, or plastic, to get whatever surface you need. I highly recommend them. All of my workbenches have solid door tops except my metal ones.

[@Wegl79]

Also, you can buy a sheet of 1/8” hardboard to cover it. Once it gets chewed up, and it will. Replace it. It’s a great work surface.

[@kaptnkarl01]

@@Wegl79 Exactly!

[@noahhorst8288]

My mother bought me one of the aprons from Adam and it is absolutely fantastic!! I am also setting up my small shop in my garage . I have gotten so many tips and tricks from Adam! Been watching him since early Mythbusters!

[@tristangates2797]

Clamps, holders, pins, magnets, weights, blocks.. anything that holds what you are working on at the right place, at the right angle for you to work on without moving is something that I am finding to be as important as the tool itself.

[@jkinerk]

I have used those same type of moveable/stationary equipment wheels for my bandsaw as well as a 2,000 lbs welding table I just welded them right to the machines and it works great! They are also really nice for actually leveling the machine, vs. just welding on casters. Cool to hear someone else talk about those!

[@rshawiii]

love that Sailrite!!! I built a similar custom 6'x 34" table on a folding leg frame that the machine drops into,but can be put away easily. I used all materials I had on hand from previous projects, including some fiberglass and awlgrip to give it a hard and durable finish.

[@PlumdogMilli0naire]

Evapo-Rust is a must have in my shop and for any maker or DIYer. It’s honestly one of my favorite modern products. As always I enjoy your videos and just enjoy hearing you discuss with likeminded individuals. Cheers Adam!

[@user-jd3zr9ee2z]

My small workshop is in our garage, and my workbench was found in the basement of our home, the base of the cabinet is metal, and the top of the cabinet is made out of a cheap counter top material. The tools 🔧 that I have are mostly from my two grandfather's.

[@dwahnaslowdown8887]

Workbenches: I stumbled upon a seller of used wooden restaurant tables on craigslist. 30" x 48" x 1.5". I bought two. They are heavy, smooth and flat with no surface irregularities. I installed sit-stand legs on one. The other, I affixed brackets under the back which support two vertical 1x3 boards. To them, I put metal "hanging planter" hangars and hung a single 48" LED shop light right over my work area. It's crude, but functional. Yes, good light is wonderful! Also, I like hard-mounting power strips to the my benches, usually under one edge. As a near future project, I want to build a rolling base for one of them, with storage as a key feature. I... just... need... more... time...

[@peoplebiter]

Adam's suggests are burned into my brain, i couldn't forget them if i tried and they are invaluable! Thank you Adam, you are priceless to mankind!

[@davidstulb745]

I have a small space in my garage, I have discovered the difference modularity has made. French cleat wall above my workbench is a game changer.

[@crumpred805]

I watched a StewMac interview with luthier Evan Gluck. His shop was unique in that his hand tools were within reach behind him. I’ve seen jewelers benches organize the same way and I’ll probably do this with my electronics workspace.

[@phillhart2990]

Adam, I'm an old school fan - and it's just a pleasure to watch you impart your knowledge and experience mate. All the best from down under in New Zealand.

[@Coderjo.]

For the casters for equipment, Foot Master leveling casters, particularly the GDR (ratchet) series. They come in a variety of load ratings, mounting types, wheel materials, etc...

[@bentationfunkiloglio]

Small workshop topic. Great! Perfect topic, since I'm in the midst of rehabbing my garage turning it into a workshop. Long time ago, I built a rolling workbench with butcher block top (using bunch of scrap wood). Time for a redo, I think.

I used to have an extension cord problem in my small workshop corner. Then I got tired and just picked up the same power strip that Adam was showing. I have 4 of them mounted on the wall over the workbench and desk. Best decision ever. The spacing is large enough for bigger plugs and transformers.

[@k.bronson7343]

Also for a workbench idea. Find a door shop or a home remodel and 'make a move' on one of the old outgoing solid wood doors. I kept one from an old home of mine. It is roughly 36 inches by 80 inches. I installed it against a wall with the same old door hinges so it folds out of the way (collapsable legs) when not in use. If I move I'm taking it with me again! Love it.

[@shawnsmith3531]

I love my battery-operated band saw in my shop. It's always being used. Also a good belt sander, I have a Jet 36" I believe. If you're doing rehab work sand blast cabinet is a must! Oh, and welders of all types😂.... I love my plastic welder also. Happy making!

[@billg4630]

All good advise...watching you roll around in that chair prompted me yo say mine is a favorite with a bad back it allows me to work comfortably and longer

[@rcjbvermilion]

That question about rust removal on a latge is perfectly timed. I'm also restoring (to a usable state) an Atlas lathe. And I was even talking to my wife earlier today about Evapo-rust. Hearing that from Adam confirms that i should pick some up...

[@walter2670]

Bench vise is an absolute must have. A good one, slowly mounted. Preferably on a heavy stand off the workbench😊

[@rupe53]

Just made a work bench out of 2x3 pallet wood, laid on edge. It's glued and screwed, then drilled for some 3/8" rod to hold it ridged. Coated it with urethane. Couldn't decide what kind of legs to use so I put it on top of an old "teacher's desk" that is sturdy like crazy and has a bunch of drawers. It also has 2 of those pull-outs for typewriters. (left and right) That's handy for when you need a little extra space. The whole thing is strong enough to mount a bench vise and hammer front end parts on my hobby cars. Got a few overheat lights and a plug strip to finish off things. BTW, most tools at garage sales are useless, but I did stumble on a bench grinder and one of those desk lamps with the articulated arm and a magnifying glass. Other garage sale items are an old hair dryer, electric heater, small window fan, etc. Handy when doing small spray paint jobs. Also found a short and tall stool so have options depending on the height of work. This bench is in an L-shape with a sturdy table so plenty of room to put things to the side. Oh, and hanging shelves from the rafters. Found those at a garage sale too.

[@gwarguts]

You learn a lot working in a small shop. I work in a 8x10 shop and have learned tons about storage

[@hd-be7di]

Nice Google swastika lol

[@bennyfactor]

Evaporust is great! It's a chelating agent, so like Adam said, it works over and over, you don't have to throw it out, it doesn't get used up.

[@bryanwhite2685]

YES!!! I use that exact power strip in my home office!

[@TheOneWhoMightBe]

Something else to consider is temperature management. If your shop is a furnace in summer and an ice box in winter, it's not going to encourage you to go there and do stuff. It doesn't have to be the same temperature as your living areas, but it should be a comfortable work environment.

[@conradgittins4476]

The work bench that I have is one that happened by chance. I have a table that I use for a bunch of things but isn't heavy enough for planing timber. One day we found a discarded roof truss off cut (6' x 1' x 3") and placed it on the table over non slip material from the supermarket. I had the intention of bolting it down but found that it doesn't budge at all on the non slip material which is great because it's easy to remove when required.

[@Grady_OBS]

As someone with a small shop, organizing and sorting is #1 on the priority list, as well as having the more used tools closer to the main area on or near the work bench for quick access

[@K1PRD]

Lighting and more lighting. My 57 yr old eyes couldn't agree more. When I'm running my table saw I have multiple lights flooding the surface to keep shadows at a minimum. Also, the Grizzly workbench tops look awesome, definitely going to use one in my bench build and plan on punching some dog holes in it. Thanks for the tips.

[@Bayan1905]

I second antique malls, flea markets and garage sales for tools. Last year I found a brand new Stanley miter box with saw for $5, along with a nice older hobby saw, also $5. I picked up a really nice older chisel that cost me $7 and is still very sharp. I've seen planers, all sorts of tools out there at some of these things for next to nothing compared to the cost of what some tools cost new. Last year I found a Singer 66 sewing machine that I got for $50 that's like new. It came with not only a rewired cord but also a new light for it. Since I am using it for leather, I want to be able to control the speed and slow it down so I added a handwheel so I can work the machine manually but it's in perfect shape. There are a lot of good tools and deals out there on them for a workshop so you don't have to buy all new things just getting started.

[@MatthewBuntyn]

Another good product for surface rust removal is Klingspor's Sandflex block. It's a block of rubber with abrasive (60, 120, or 240 grit) throughout. I mainly use the Fine (240 grit) for removing any light rust that pops up on my hand tools.

[@OscarSommerbo]

Evapo-rust is great, but if you don't/can't fully submerge something there is a risk of etching a line where the part sticks up over the surface.

[@alandesgrange9703]

I wrap or cover it with a paper towel soaked in Evapo-rust, when I can't fully submerge.

[@FunAtDisney]

One thing I would highly recommend for any power strip is a built in circuit breaker (fuse, etc). A good friend of mine who was the PIO for OC Fire (and went to numerous house fires caused by power strips) recommended that to me. It might add $5 in price at most.

[@arkturhellsing1484]

work bench, plywood and enough 2x4s to build a frame is my go to.

[@teenylank]

Adam’s energy is so inspiring!!

[@donniemacneil3804]

When building a shop (or anything you might use for a significant amount of time) I think it's a good idea to build a lower fidelity version of what you have in mind. How you imagine a space to work can differ greatly from how it actually works in reality. For example, you might make some really slick shop drawers under your workbench only to discover that you'd flow better with wall-mounted cabinets. Make something a little rough to get you going, and once you've settled in to your process you can start to do that fancy shop infrastructure

[@shaunpage4498]

I do this a lot when setting up something or creating some shop fixture for the first time. Usually there’s some complicated feature I want to add, or something that bothers me that I want to change. But it makes more sense to try it as-is first.

[@kraft_mo1245]

Ha! That antique mall suggestion is brilliant! I get all my hand tools there! Even better if you like restoring old tools.

[@james2042]

rags, sink, air circulation, small/hand vacuum, first aid kit (I like a dedicated shop one so I don't have to run looking for it only to find out someone else used it without mentioning it), stack of blank paper, a laptop (or notebook). As for workbenches, I have an old executive office desk an office was tossing in a move. Thing takes 3 people to move, but its rock solid and has built in file drawers, which work great to hold manuals and such

[@peterschmidt9942]

You make an interesting point Adam about not having tools above the work bench (like most channels always seem to have). Personally I prefer to have them in reach but not above a main work bench because if I need to cut, route or plane something in a vice then it just gets plastered with saw dust. Sometimes I can't hook up a shop vac to the tool when I'm using it. So having tools somewhere else tends to eliminate cleaning them so often. One thing I find useful is the power distribution leads. They're basically an extension lead cut into 2m lengths with power points inbetween. You can just screw them to the wall at intervals and plug the end into your regular socket. You can even hang another powerboard off them if you need them for charging stations. Great if you don't know exactly where you want outlets when setting up.

[@anthonyrich1592]

For Joshua Drum: you can get heavy duty bench castors for moving shop machinery around. They bolt to or weld to the machine stand such that the stand is normally sitting on the ground and stable, but you can stand on each castor's pedal with a foot to raise that corner on a castor wheel to move the equipment around. The pedals have an over-locking mechanism so you don't need to keep standing on them, when you get the equipment to its new position you just flick them up to disengage the castor wheel and drop the machine stand back down on the ground.

[@Tuxedomakdarien]

I just got my Atlas 10F up and running that I inherited from a neighbor.

[@tested]

Amazing!

[@KillerSpud]

Those power strips are great, but i can also highly recommend a retractable extension cord reel, they are so handy to pull out then put away so easily.

[@erich7592]

The Sortimo system is done and look amazing! Ss previously mentioned all the new stacks of Sortimos means there are more hijinks to ensue.

[@tylerfred7514]

That power strip made me smile. It is one of the last things my mom gave me before she passed. Thanks for a silly memory. But a good one.

[@emilkuttel1]

Parts washer, bead blasting cabinet and a shadow board are next on my list.

[@billbucktube]

I helped a friend paint walls, floor and ceiling gloss white. It was as if we tripled the lighting. If possible buy power strips with the slots aligned like this one. When the slots are parallel to the sides power bricks will cover the next outlet.

[@NiftyVT]

I just finished setting my new hobby space, mainly table top game miniatures. I put 25 years of lessons learned into the space. Started from way back in the day with a tool box of stuff that I would have to now a spare bedroom in a walk out basement. I spent the past 20 or so years just buying another set of small plastic drawers whenever I needed more storage for “stuff” so everything was all over the place! New space has IKEA kitchen cabinets top and bottom with tons of drawers. I spent many hours sorting all of my stuff and doing a first order of retrieval system in the base cabinet drawers. Only thing left to do is Murphy bed the guest bed and build a dedicated airbrush booth desk that’s on wheels. I already punched a hole through the foundation for the paint booth to vent fumes out of. It’s been a fun project.

[@RicSupra]

If you have the space used pallet racking is awesome to use for storage space. Even used one to make a workbench.

[@michaelfaraday4243]

Hand Tool Rescue has me in love with Evaporust.

[@fabycho6791]

A comfortable chair

[@3075stephen]

I have and love the plug strip, 14 AWG and spaced out plugs. perfect for the one man shop rule.

[@ToolsandTime]

Good tips Adam, the more light the better for the shop!

[@byronservies4043]

I use workstation casters. They have a foot pedal to lever them up so the wheel is engaged and you can move the workbench (or whatever).

[@agelessstranger964]

I LOVE those power strips. I use them all over the place.

[@Dungareeman]

I've found that old Data center rack power supply's are the best. Most are 220, but you can find 120v if you look around. Love it

[@hungsolow2892]

I have 7 4 foot led shop lights, 2 over my work bench to prevent shadows and 5 from the ceiling.

[@butlerdawgs78]

A lament for a recently departed tool store in Pompton Plains, NJ : When my Dad was trying to sell my grandfather's case of machinist tools we were looking for some help with pricing and identification after some high end micrometers were let go at our garage sale for far too little. A nearby shopper who was serendipitously a former machinist pulled me aside to warn us of the blunder . As I was discussing this with my barber while getting a haircut one day, he said he knew the perfect place, Re-Tool. The owner was a shop teacher at a local tech school running the store afternoons and weekends. This place was a treasure trove of used tools at great prices, and his years of experience were incredibly valuable. We ended up selling Grandpa's tools on consignment over the course of a few years, occasionally getting a nice surprise check in the mail if some tools had sold. Unfortunately for us, two years ago the owner retired from his full time job and closed the store as well. While I am happy for him, there is a hole where a great store used to be.

[@maxrockatanksyOG]

Defiently, a well designed, solidly built workbench is top of the list; build it to suit your height & arm reach. Power Points- can never have too many, and in my shed, I put double points every 1.5 meters. HVAC- whether simple wall mounted fans, aircon or heater - makes life more comfy when working on something. Small/ Medium whiteboard for nutting out ideas. I put 2 moveable lamps with LED bulbs onto the wall behind the workbench- they are manouverable in many directions & height

[@andreasm8391]

I saved the rust remover for later when I need it. Thanks for the hint.

[@RobDucharme]

2:45 I have a VERY similar strip that I bought from Costco. It's fastened under one side of my long mitre saw station. Mine comes with two USB ports which is ideal because I have an old Samsung S9 that hardly holds a charge, but as long as it's plugged in, it's fine. And the other port has a cable that charges my IsoTunes Bluetooth ear muffs. I'll never need ALL of those outlets, but if one starts to get loose or somehow fail, there are others that were unused. I'll just blow them out with compressed air and carry on.

[@dosesandmimoses]

Thanks for the tips! Working with rust removal can be confusing for an amateur like me!

[@matteout_woodworking]

Also for a bench one of the best benches I ever had... Well I now have still as the core of my current bench.... Is a commercial door. One of those fireproof heavy solid core doors. I got mine at a construction surplus store way back when. I used it on sawhorses for years and then put it up to 40 inches and built around it for my current bench. I also had an old 1 1/2 inch solid core computer desk for 10 years as my main bench that I still have rolled up to the back wall of my shop that has some benchtop tools on it. Heavy and sturdy are essential. You want something that you can smash with a hammer and not have it break in two.

[@LloydParkes]

Thanks for mentioning shelves. I already have wall mounted shelves in my living room for a vast number of paperbacks and warehouse shelving for storage, but I still have my electronics workbench (an old govt issue office desk) covered in junk. I'm off to the hardware store and it's only going to cost a few $

[@dannyarendall5233]

I put some old threading die’s in some evaporust overnight and it blued them which is great but it took the size marking off hues I’ll just etch the size on them for easy reference

[@Chukijay]

This used to be covered on Still Untitled. I still fondly remember the “cool tools” videos with that older gentleman that was a peer/acquaintance of Adam’s

[@SWGhostbuster]

Tools you can collect as you go start out with simple stuff, bigger tools like lathes and milling machines can wait till later. Simple stuff like screw drivers, chisels, knifes , files and hammers. Dremels are a must along with bits, you'll soon figure out what bits you use the most. Oh and band saws you will use the heck out of those.

[@TR4Ajim]

Check out buildings/homes being renovated. I picked up a piece of old counter top about 6 feet long at a house demo site. I used a long piano hinge to connect it to the wall of my garage, with a swing down leg. I can pull it out when I need it or fold it down when I don’t.👍 I also got two 8 foot double fluorescent light fixtures FOR FREE from a supermarket that was being renovated. They were being thrown out, and demo crew just wanted them gone. I converted their wiring to use LED lights.👍👍

[@bushratbeachbum]

If you're putting a lathe on wheels, you will be sacrificing accuracy. Lathes need to be levelled (there's a lot more to this than using a builders level to make it level to that spec. A LOT. ) This isn't essential, but if you're looking for or missing accuracy, then you will need to google how to level your lathe. It's probably not what you're expecting but well worth doing well. Happy turning either way!

[@JulianSortland]

If you put one on a mezzanine floor you will lose accuracy. Borg Warner in Australia had precision lathes for making car parts, exempt from import duty because we only manufactured ordinary grade ones here. The ones on the factory floor passed accuracy tests, the one(s) in development area had test piece after test piece fail accuracy tests, no matter the adjustment. The National Standards Lab, now National Measurement Lab*, of the CSIRO where my Mum worked was involved in finding the problem, and possibly in the initial evaluation. Eventually they figured out that the timber flooring was allowing them to flex, while those one / secured to the concrete were fine. * Or perhaps the more recently National Measurement Institute, as more practical and legal functions moved to NMI, with CSIRO in the more theoretical and research areas.

[@JulianSortland]

NSL became NML when it moved from the Sydney University site to West Lindfield, which is maybe 20 minutes north of Beyond, where Mythbusters was edited.

[@RowanHawkins]

You can setup like a server rack. A screw lift in each corner for leveling and to lift the device off casters. Your gonna want hdpe or even metal wheels for that weight.

[@riaan7836]

very good video love it.power strips and work space is a must and good storge

[@teamja1088]

In the 90s we used a parts washing solution to degrease engine parts made by Exxon called Varsol that was the best parts washing solution. I have not found anyone recently that sells it so we now use mineral spirits. A parts washer with an intrinsically sealed bright as the sun light is a must in my shop.

[@rmac52]

Organized storage is the single most important thing i can think of for a small shop space. nothing makes a shop feel smaller than clutter and not being able too find things.

[@darknessblades]

I have one of those 12 socket ones below my desk. its really needed because of the angle the connectors are, which make some ports useless

[@robinhammond4446]

You had me at 'do it, do it, do it!'

[@garychaiken808]

Great job. Thank you 😊

[@matthewsever]

Man I use those big long power strips for my entertainment center. Attached it to the back of my TV bench. So much better than those little ones.

[@donaldevans5752]

Brilliant , I love this type of video .

[@freeNode5]

I bought a big industrial packing table from Uline and it's the best bench I've ever had