Great method for tying the eyes in, best yet. I've a five year old grand daughter who loves drilling out the cylinders.i
@lindsayiflyfish6 ай бұрын
That is awesome! Get her tying!!!!
@timjoyceflyfishing-essex67693 жыл бұрын
The original and still the simplest and best mate ... nice vid .
@lindsayiflyfish3 жыл бұрын
Thanks 👍
@MrMartinzx133 жыл бұрын
Great video again Lindsay, many thanks!
@lindsayiflyfish3 жыл бұрын
My pleasure!
@lawrencemacd633 жыл бұрын
Great method Lindsay 🐟🎣🙂
@lindsayiflyfish3 жыл бұрын
Glad it was helpful!
@fliesbychris3 жыл бұрын
Great vid Lindsay !! I chuck them in the oven for 30 seconds to seal the foam too. 150°C on a tinfoil tray. Keep em coming!! ATB Chris
@lindsayiflyfish3 жыл бұрын
Sounds great!
@gregorfleming1473 жыл бұрын
Thats the way a do it nice and simple 👍👍👍
@lindsayiflyfish3 жыл бұрын
Cheers pal.
@jayhyn3 жыл бұрын
good video ! very helpful.
@lindsayiflyfish3 жыл бұрын
Thanks for watching.
@markrobinson38413 жыл бұрын
Great video Lindsay
@lindsayiflyfish3 жыл бұрын
Glad you liked it!!
@hankvana21492 жыл бұрын
If you can't get Upavon foam cutters the telescopic stainless steel shafts on fly-swatters and back-scratchers work very well.
@lindsayiflyfish2 жыл бұрын
Used to use old car Ariel’s 👍
@johnallan19653 жыл бұрын
Great video would it be possible to show a video on how to sharpen the cutters please 🙏
@lindsayiflyfish3 жыл бұрын
Hi John, its fairly straight forward will try and get a short video sorted out for you.
@johnallan19653 жыл бұрын
@@lindsayiflyfish thank you lindsay
@flyfishingchannel3 жыл бұрын
Great!
@lindsayiflyfish3 жыл бұрын
Thanks for watching.
@michaelshaw83703 жыл бұрын
Your kiss keep it simple stupid approach dispels the bull dust and the lessons from experience add soo much to every subject you cover. The water with washing up liquid (translation for our American friends dish soap) for cleaning and lubricating the cutter. In the long run the prefabrication of bulk boobie eyes saves a lot of time. The not using a figure of eight technique to secure the tictack instead five turns in each direction is inherently much stronger. My only extra tip would be if preparing cylinders for fabs instead of a ninety degree cut a forty five degree cut saves two cuts later.
@lindsayiflyfish3 жыл бұрын
Thanks Mike
@gregor-13 жыл бұрын
Dremel to round booby chord ends so much neater imo
@lindsayiflyfish3 жыл бұрын
Used to do that but only got a cheap knock of dremel it broke and I never replaced it.
@luizaugustomaiadeoliveira22443 жыл бұрын
👏👏👏👏👏👏
@lindsayiflyfish3 жыл бұрын
Many thanks.
@hankvana21492 жыл бұрын
Thanks Lindsay, this is very helpful for us boobie newbies. I'm still viewing your videos (haven't watched them all yet). Do you have a video (or would you make one) on the what length and diameter of cylinder to use? There seems to be a need to consider air resistance and buoyancy relative to the size of the fly, hook and how it going to be fished. I've tied a couple of boobie flies and I'm not sure that I have the proportions right. I'd appreciate any help, it's the winter fly tying season here in Canada and I would rather not tie up a couple of dozen boobies only to find that they aren't usable. Cheers!
@lindsayiflyfish2 жыл бұрын
Thanks Hank, I will have a think about how to best make a video about the subject 👍
@hankvana21492 жыл бұрын
@@lindsayiflyfish A video would really be appreciated! I've looked for boobie flies here in Canada and the commercially tied ones I've seen were very poorly tied - I strongly suspect that the tier has never seen a proper fly let alone fished one.
@herwigvanhellemont79542 жыл бұрын
Hello Lindsay, How long and thick you make them? Is this in function of the hook size ? I can imagine that on a hook size 14 you don't put a 7mm or am I wrong?
@lindsayiflyfish2 жыл бұрын
Hi Herwig, you are correct there are different diameter cutters that go down 4mm you can cut the length to suit your needs.
@hankvana21492 жыл бұрын
Hello Lindsay! I've ordered some proper Upavon HD foam and been looking at boobie fly patterns so I can start tying for the next season. Would you please comment on my speculations to confirm that I'm going in the right direction. As near as I can determine from most examples, the diameter of the eye is the size of the hook gap or slightly smaller and the length of the cylinder is twice the diameter of the eye or 1/2 the thickness (.5 inch) of the standard foam block. The hook, usually a size #10, has a short shank and the fly dresses to an overall length just over two hook lengths long to the end of the wing & tail. I'm presuming that this is a typical boobie fly configuration suitable for fishing on its own or as a point fly on a washing line. Spinning (while casting or during fast retrieves) seems to be a concern. Presuming the eyes are tied in properly, I'm guessing that the hook weight/length and the wing dressing (sparce or full) will determine the fly's stability - too much would deaden the action, not enough and it will spin. Have I got this right? I'd appreciate any advice. ATB!
@lindsayiflyfish2 жыл бұрын
Getting the eyes even and smooth will help eliminate the spin. Folks have issue with spinning flies when one eye is smaller than the other if that makes sense. As for proportions don't be afraid to tie bigger than you might think diameter wise as this will make the fly move more in the water. I hope that helps.
@hankvana21492 жыл бұрын
@@lindsayiflyfish Thanks Lindsay, that helps a lot!