🔥How to Make Reusable Stencils for Wood Signs with Silhouette Cameo

  Рет қаралды 193,895

Silhouette School with Melissa Viscount

Silhouette School with Melissa Viscount

Күн бұрын

Пікірлер: 266
@elizabethsikora5186
@elizabethsikora5186 6 жыл бұрын
Put mod podge on the stencil first and let it dry before you paint. Then it won't bleed
@leithagrover9116
@leithagrover9116 6 жыл бұрын
Thanks
@kdbbn8
@kdbbn8 4 жыл бұрын
so you will be painting over mod Podge?
@BarbaraEMarshallCampbell
@BarbaraEMarshallCampbell 4 жыл бұрын
More recently, I'd like to know if anyone else has used the Mod Podge to keep the stencils in place. Sprays are prohibited in our apartment complex so it will be great if a light coat of Mod Poodge will work but I'm worried that it would stick to the base and there would be problems in seperating the laminate from the plate. Anyone try it yet?
@terrymaracle9315
@terrymaracle9315 4 жыл бұрын
Try Aleenes Tack it over and over. A brush on glue that stays tacky. Can be found at Michaels in the glue section. Can be quit sticky, may need to make less tacky with pressing on a piece of fabric, this might work.
@oclove1503
@oclove1503 3 жыл бұрын
One thing I've been wanting to try to hold it in place is Rubber Cement. I think it would work well. And to remove it. U just run it off.
@selenabostick5844
@selenabostick5844 2 жыл бұрын
“Throw everything on the floor so you have room” lol this is me all the time
@vasilikigeorgali4128
@vasilikigeorgali4128 3 жыл бұрын
Hello from Greece, I found you by mistake 🤣🤣 I didn't about that.its amazing tool. Thank you 🥰😍🤪
@SilhouetteSchool
@SilhouetteSchool 3 жыл бұрын
Welcome!
@nicoleb6957
@nicoleb6957 4 жыл бұрын
I want to thank you for this video. I was having trouble figuring out what settings to use. Great video!
@Poegirl77
@Poegirl77 3 жыл бұрын
This is genius! Just what I was looking for to make a stencil to paint my little girl’s room. I tried using vinyl, but it was just too flimsy. I’m going to try this right now! Thank you!
@BarbaraEMarshallCampbell
@BarbaraEMarshallCampbell 4 жыл бұрын
These are gorgeous paintings with stamps. I can't waitt to watch the video and give it a try.
@tabithapowell7326
@tabithapowell7326 3 жыл бұрын
Thank you so much for sharing this, Melissa! Game Changer!
@jonschraff
@jonschraff Жыл бұрын
AWESOME tip! Thank you very much!!!
@cynnidc
@cynnidc 4 жыл бұрын
Using laminator sheets is such a smart idea. Way better than buying stencil material which is expensive in my local craft shop. Thank you for this video!
@thekaywehtv
@thekaywehtv Жыл бұрын
Hi! What are the thickness and blade levels for the laminating pouch?
@cynnidc
@cynnidc Жыл бұрын
@@thekaywehtv @THEKAYWEH TV hi, I don't have the setting saved anymore since I reinstalled the program. But I always make a few test cuts before I make my project and then save it for the next time. It also depends on what kind of laminator sheets you use and if your blade is new or not.
@chelethacker2081
@chelethacker2081 3 жыл бұрын
You can order the mylar sheets on amazon etc and cut on your machine. I use favorite text to design words then use eraser to erase a small section of letter to add a bridge so the middle of letters like e a o p stay in place when stenciling. Reusable stencil. I do this a lot to personalize names on fabric etc.
@joansmithies7255
@joansmithies7255 4 жыл бұрын
You can buy proper stencil Mylar sheets for making stencils, a lot stronger and harder wearing, and the Cameo cuts them out without any trouble, even intricate designs. I do this as I am a stencil designer for an American stencil company.
@gloriaarcila9394
@gloriaarcila9394 4 жыл бұрын
Hi! please help me, I have been trying to cut 10mil mylar for about 3 weeks now and I can't figure it out, it is a very intricate design so I would rather use the 10mil for longevity purposes, do you have any advise for the setting to be used? I have both the auto blade and the deep cut. TIA
@holyfreeholy2329
@holyfreeholy2329 4 жыл бұрын
Thank you . Ima do some research I want to make some for my canvas. Ima see what the proper material option might be. We might have stencil or Mylar sheet on the silhouette portrait 2? I’ll check it out. And up date.
@IronMan-yg4qw
@IronMan-yg4qw 4 жыл бұрын
does silouette cut 6 mil mylar?
@holyfreeholy2329
@holyfreeholy2329 4 жыл бұрын
Dead Pool 6 mm Mylar “Mylar” is a type of stencil paper
@IronMan-yg4qw
@IronMan-yg4qw 4 жыл бұрын
@@holyfreeholy2329 k thx
@Ikki1me
@Ikki1me 4 жыл бұрын
I have been looking for how to be able to make reusable templates for stamping so this information is amazing! I just got a Cameo 4 recently....haven't even hooked it up and tried it yet, but am looking forward to using it!
@cherylwisneski8184
@cherylwisneski8184 6 жыл бұрын
I just picked up a laminator at Walmart for $17.96! Works great!
@marteissamauldin2174
@marteissamauldin2174 6 жыл бұрын
Can I ask what your blade was on? Mine isn't cutting on these settings?
@cherylminaya7276
@cherylminaya7276 3 жыл бұрын
That would be great to know, because it is not cutting for me either.
@bethdunnavant110
@bethdunnavant110 5 жыл бұрын
You just rocked my world! LOL this is awesome.
@bethharvey5137
@bethharvey5137 6 жыл бұрын
This is amazing! Thank you this will save me so much on materials.
@lw7967
@lw7967 4 жыл бұрын
Freezer paper does work and if you put it on wood, fabric, or anything that can take the heat, you can iron it onto the piece & there will be no bleed thru. You can use the stencil a few times & super easy to cut! Put the shiny plastic side down on mat to cut & of course, shiny side down on your piece to iron it on. Have fun!
@pinchopaxtonsgreatestminds9591
@pinchopaxtonsgreatestminds9591 3 жыл бұрын
Great! I'm making stencils for a sign for my music studio!
@frankmackii904
@frankmackii904 4 жыл бұрын
I don't know how i got here. I was looking at tattoos. But cool trick.
@Thejoselynscreations
@Thejoselynscreations 4 жыл бұрын
Hahaha I see the crafting black hole sucked you right in lol
@kaseydaugherty409
@kaseydaugherty409 4 жыл бұрын
@@Thejoselynscreations it has a way of doing that!!!
@thesoundandthesilence
@thesoundandthesilence 3 жыл бұрын
Best way to start my day 😂 thanks man.
@bonnieranallo1315
@bonnieranallo1315 3 жыл бұрын
🤣🤣🤣
@amandasansone
@amandasansone 3 жыл бұрын
Lol!!😆
@barbarabosler1307
@barbarabosler1307 6 жыл бұрын
Can not wait to get my laminating machine!! Thanks for that tip!!
@barttroxler7980
@barttroxler7980 4 жыл бұрын
Very insightful! Thank you!
@shelleymcguffey5291
@shelleymcguffey5291 4 жыл бұрын
new to this....... is that a "special" blade you popped in? I know there is a fabric blade.... wasn't sure if that was a special one for the stencil. Thank you!!!
@reginahonore9717
@reginahonore9717 3 жыл бұрын
What blade did she use?????
@MsNancy0902
@MsNancy0902 3 жыл бұрын
I’m here to find out
@wmlittlexplorer
@wmlittlexplorer 4 жыл бұрын
Thank you.i wanted to do this for my wall painting.
@kymirabelle5319
@kymirabelle5319 4 жыл бұрын
You just saved me a ton of money.
@chobensa
@chobensa 5 жыл бұрын
I like using thin report cover plastic (Dollar Tree @$1 for several) for stencils to use with Gelli plate. Want to try this for thicker needs.
@brittanysanders6628
@brittanysanders6628 4 жыл бұрын
With cameo 4 would you use autoblade? Also what type of adhesive spray do you recommend?
@Rapto832
@Rapto832 5 жыл бұрын
Finna go stencil my school now
@claireevans2336
@claireevans2336 5 жыл бұрын
Fantastic tip, thank you.
@Gonzano560
@Gonzano560 5 жыл бұрын
Love your channel very creative very motivational
@denisehoegen4112
@denisehoegen4112 5 жыл бұрын
OMG! Brilliant!
@krystlegiuffre4387
@krystlegiuffre4387 3 жыл бұрын
Can you make a video showing us how to use contact paper aka shelf liner. from the being to cutting parts and material to select for it. Also you show how to use the stencil vinyl 813 also please. I am new to using the silhouette cameo 4.
@RunningOnAdd
@RunningOnAdd 5 жыл бұрын
I'm in love
@sharonbetson3658
@sharonbetson3658 5 жыл бұрын
I've learned that if you put Mod Podge within the stencil area once it's placed on your project it helps lesson/prevent bleeding.
@holyfreeholy2329
@holyfreeholy2329 4 жыл бұрын
I accidently made a stencil using the wrong side of my heat transfer vinyl (htv) I accidently used the plastic protector side and when I got it done. I noticed it became a perfect stencil.. idk if the plastic is too hard on the blade. Mine seem to be doing fine.
@bayblogphilippines6840
@bayblogphilippines6840 5 жыл бұрын
nice. cutting the stencil without machine. easily for me guys..
@mommybeth70
@mommybeth70 2 жыл бұрын
If you pre paint your wood, does the adhesive cause a film after painting of stencil and lifting
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Nope!
@imanicoleman4101
@imanicoleman4101 4 жыл бұрын
So is the cameo machine another version of circuit machine
@D0NNASAUR
@D0NNASAUR 5 жыл бұрын
Can you make the clear laminate page even thicker by adding perhaps a white or colored cardstock in between laminate sleeve ? That way - I’m sure it’s easier to see what your stencil is - or perhaps write or print title/info /design/ misc. on the cardstock or paper . Just a thought ... but definitely wouldn’t mind the thicker stronger material for sure !
@mishkajb
@mishkajb 5 жыл бұрын
Instead of cardstock, what about using onion paper? I would be worried that the thickness of the cardstock or even regular printer paper would let the paint bleed between the layers. Thoughts?
@lisafangman4367
@lisafangman4367 5 жыл бұрын
what is onion paper?@@mishkajb
@angelrutan8427
@angelrutan8427 5 жыл бұрын
Once you cut a stencil with any material sandwiched inside, it's no longer sealed or waterproof. They do sell laminate sleeves in different thicknesses though. It really doesn't need to be thicker to work as a great stencil though. If you want it colored (as opposed to invisible ;) , you can use the plastic sheet dividers from Dollar Tree as someone else had mentioned.
@DeziDezigns
@DeziDezigns 5 жыл бұрын
Or you can just put two laminating sheets together so that there's one inside of the other
@ShaiMyst
@ShaiMyst 5 жыл бұрын
Thanks for this tutorial. As a teacher i have to keep making new stencils for various items and before I was just using cover stock and throwing it away as it became too soggy to use. I already have a laminator so fingers cross that it works with this!
@valathoroddsen
@valathoroddsen 5 жыл бұрын
thank you so much for this!
@YOREDYS
@YOREDYS 5 жыл бұрын
Thank you for teaching us. The video is very useful I have a question, if I am going to use the stencil for a tshirt as I must paste it so that the template does not move. Thank you very much and blessings
@senseamylia
@senseamylia 4 жыл бұрын
I use a temporary sewing spray adhesive for less bleed through.
@michelle-elise8951
@michelle-elise8951 5 жыл бұрын
i picked up a laminator as well! but how do u keep the center of the letters to stay? did u add them afterwards?
@LindaMaeNot
@LindaMaeNot 5 жыл бұрын
I created my stencil in layers. There are two layers for the words. One is for the whole word and the second is for the middle of the letters. I simply stencil the one with the larger words first. And, once it dries, I place the stencil with the middle of the letters over the original words and stencil them. Awesome.
@peggymarkham2243
@peggymarkham2243 5 жыл бұрын
How thick should the laminating sheets be, and is there a specific blade that you need to use?
@kimreynolds750
@kimreynolds750 4 жыл бұрын
Is this a better way to make stencils for silk screen or the vinyl stencil cut way??
@ursulajackson640
@ursulajackson640 4 жыл бұрын
What are the settings please 👍🏽 and how thick is the laminate ?
@bossfrog9561
@bossfrog9561 4 ай бұрын
Do you have a video on how to make the actual stencil a computer or iPad?
@maryannpape7126
@maryannpape7126 2 жыл бұрын
Can I use 5mil laminate sheets? What setting do I need and which blade. I have Cameo 3
@Nona-ri3vo
@Nona-ri3vo 2 жыл бұрын
Are you using the normal blade or the kraft blade??
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
You'd want to use the autoblade or the manually adjustable ratchet or 1mm blade for this. No need for the Kraft Blade
@johngeiser8225
@johngeiser8225 3 жыл бұрын
Going to cut some Craft Plastic sheets on the cameo 4, its .007 thick, which blade and setting should I use?
@marissapalke6842
@marissapalke6842 4 жыл бұрын
Hi thank you for the tutorial! What thickness are your lamination sheets? I've mostly seen options for 3 mil and 5 mil. I think I just ordered the 5 mil. Thank you!
@karenbonnetti-ramirez6264
@karenbonnetti-ramirez6264 4 жыл бұрын
It looks like 3mil. The 5mil might be too stiff.
@RaHDauXEDinA1
@RaHDauXEDinA1 5 жыл бұрын
Wow! Can you use this method to print on garments? Thank you.
@aljessip2923
@aljessip2923 5 жыл бұрын
Can I make a stencil from transparency on my Cameo 3? Using auto blade? Any suggestions? Thank you so much for your help.
@karenbonnetti-ramirez6264
@karenbonnetti-ramirez6264 4 жыл бұрын
Did it the transparency work?
@blessingsmwakalinga6415
@blessingsmwakalinga6415 6 жыл бұрын
Thanks for this wonderful tutorial, But i wonder if one can use the Auto Blade to cut these laminator sheets for the stencils?
@Chris-wg9gy
@Chris-wg9gy 4 жыл бұрын
Hobby Lobby has reusable stencil vinyl👍
@justaguyandhisfish3052
@justaguyandhisfish3052 5 жыл бұрын
Remember overhead projectors from school ?.. why not use clear overhead sheets
@shawnaudiles5785
@shawnaudiles5785 5 жыл бұрын
That's I use transparency paper
@mariad4183
@mariad4183 3 жыл бұрын
The laminator sticks 2 sheets together making a thicker plastic
@dannicaroseaquino881
@dannicaroseaquino881 3 жыл бұрын
Will the basic edition of Silhouette Studio be enough for creating customize stencils? The kind where you draw the design, scan and edit it in the software, then cut?
@jwerner00195
@jwerner00195 4 жыл бұрын
In Business Edition 4.3.356 the settings for Sticker Paper, Clear are Blade 2, Force 25, Speed 4 and Passes 2 with the Ratchet Blade. Will these settings work like the ones you mention in the video or should i create my own setting with your values for each setting?
@anjajarvis6380
@anjajarvis6380 4 жыл бұрын
I made a stencil using 80 micron hot laminated paper and the settings almost the same as informed by Melissa Blade 3, Force 25 Speed 4 and Passes 2. I saved this as a user-defined setting for stencils as these settings worked like a gem.
@judimoore9757
@judimoore9757 5 жыл бұрын
I tried this but can't seem to get the laminate to cut all the way through with these settings and auto blade. I've adjusted it several times with no luck. Any comments on the auto blade or which is best to use? It's the only blade I have but I'm willing to invest in one if it works. And what settings have been successful for other's with Cameo 3 and laminate cutting material?
@sheryldollens2222
@sheryldollens2222 7 ай бұрын
Can I cut this with a cameo 3? Do I need a different blade from what I use from vinyl?
@SilhouetteSchool
@SilhouetteSchool 7 ай бұрын
Yes you can cut with the CAMEO 3 and no you can use the same blade
@erinbottiglierie9290
@erinbottiglierie9290 2 жыл бұрын
I just purchased a cameo 4 and also got the roll of oracle masking film 813, along with pretty much any vinyl that i got in my bundle.my machine is only cutting half of any design. going through a lot of vinyl and stencil vinyl to figureit out and nothing working. any advice?
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Usually that's caused by the blade now being seated correctly in the carriage. Make sure the blade is pressed all the way down and there is no gap.
@erinbottiglierie8229
@erinbottiglierie8229 2 жыл бұрын
@@SilhouetteSchool I will try that to see if that works. Thank you!
@christopherbeddoc7798
@christopherbeddoc7798 5 жыл бұрын
can you tell thickness of the laminating pouches
@jackielittle4498
@jackielittle4498 3 жыл бұрын
Do you think this would work for bread stencils?
@GrowingGreener
@GrowingGreener 2 жыл бұрын
Hi got the same laminator and sheets but need some help!! My sheets keep coming out with bubbles in them. Will that be a problem? Thanks
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Hey there! It could be an issue if it causes your design to be misshapen. If you have a slower setting on your laminator, I would choose that.
@GrowingGreener
@GrowingGreener 2 жыл бұрын
@@SilhouetteSchool Thanks will try. I know one is 3 mil and one is 5 mil. perhaps one is slower? I really wanted to try this with a design I purchased at the It's So Fontsy.
@seaweeddesigns3895
@seaweeddesigns3895 5 жыл бұрын
Hi, Can you please tell me what you said about running through ? to make it sticky again? sounded like Dye Ron machine? Thanks
@angelrutan8427
@angelrutan8427 5 жыл бұрын
Xyron Sticker Maker. I don't have one. I use the spray glue.
@seaweeddesigns3895
@seaweeddesigns3895 5 жыл бұрын
Oh!!! Thank you so much
@judimoore9757
@judimoore9757 5 жыл бұрын
She has a video making faux leather earrings where she uses this machine. Just thought I'd reply in case you are still in question on it.
@candacemccaffery8186
@candacemccaffery8186 11 ай бұрын
What if you have the original silhouette cutter?
@Acka8017
@Acka8017 2 жыл бұрын
Can you use this method on tshirt ( with ink )?
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
I have not tried it, but you may be able to! Also check out this blog post: www.silhouetteschoolblog.com/2014/01/freezer-paper-stencil-silhouette.html
@barbarabosler1307
@barbarabosler1307 6 жыл бұрын
etchall has a NEW adhesive spray that will make these stencils stick again and again!!
@bettejoenglehart6950
@bettejoenglehart6950 5 жыл бұрын
Do you think it would work for reusable cookie stencils? I’m tired of having to replace my mats
@LuisCasstle
@LuisCasstle 6 жыл бұрын
Freezer paper works fine and it's cheap.
@judybarrett2697
@judybarrett2697 4 жыл бұрын
Luis Castellon freezer paper to make the stencil? Have you done this before for your silhouette?
@DailyChaseVlogs
@DailyChaseVlogs 5 жыл бұрын
Hello. Thanks for this video! Any suggestions on how to connect the sheets if I was to make long stencil such as a tall welcome porch sign
@HopeRyan72
@HopeRyan72 5 жыл бұрын
You can re-melt the lamination sheets after they've gone through the machine. Maybe line them up and tape them together and melt the corners together?
@cassyhedges1969
@cassyhedges1969 5 жыл бұрын
If you use spray adhesive to keep the stencil in place. when you lift the stencil, do you have a sticky residue on your sign? how does that work?
@angelrutan8427
@angelrutan8427 5 жыл бұрын
I think the trick is that when you spray the stencil with the adhesive, you let it "dry". It's not really drying because it remains tacky, but if you wait a short while after spraying, it stays on the stencil quite well. I've never seen or felt residue using spray. I use it very lightly! It doesn't take much if you are using the blot paint method. if you drag the paint, that's when there is danger of the stencil peeling up or paint slipping under the stencil.
@richardlueth9961
@richardlueth9961 4 жыл бұрын
How could you use this in screen printing
@zillahedghill1135
@zillahedghill1135 4 жыл бұрын
Question, how do we see the process on the software
@robyntaurusbeatz703
@robyntaurusbeatz703 6 жыл бұрын
Nice!! Your signs are cute. I airbrush so Im very interested in making my own stencils as the possibilities are endless. Im not familiar with that cutting machine you are using so Im gonna have to look into that. does it cut any design I download onto it or what all can I have it cut??
@sprinkledandpainted
@sprinkledandpainted 5 жыл бұрын
I airbrush too and looking to make stencils. Have you tried it yet?
@NINJUTSUguy
@NINJUTSUguy 4 жыл бұрын
It can make very complex stencils from just about any image that you download! I also use free programs like Gimp to manipulate an image first then send it to my Silhouette cutting machine
@NINJUTSUguy
@NINJUTSUguy 4 жыл бұрын
@@sprinkledandpainted I use it all the time! it's great for multi-layer type stencils and can handle complex types, it is also suited for reproducing original decals for motorcycles that can then be airbrushed back onto the bike.
@sprinkledandpainted
@sprinkledandpainted 4 жыл бұрын
@@NINJUTSUguy Cool, thanks! :)
@jccreatives9619
@jccreatives9619 4 жыл бұрын
Hi dear i mesaged in ur fb pls check. Am using cameo 4. Which blade is beter to opeque stencil making meterial. Like mylar... Kraft blade not showing for this meterial pls help
@melissairvine7402
@melissairvine7402 4 жыл бұрын
Would this work for a curio? Thanks
@luciomendez258
@luciomendez258 3 жыл бұрын
I just used my Curio to cut through 3mm stencil material. I ran it through my Minc with a piece of cardstock so that it wouldn't warp, in the transfer folder. Then I used the clear sticker paper settings. Cut beautifully, but maybe drop the force a little. I got a little shadow on my mat.
@spheder
@spheder 4 жыл бұрын
Curio settings? Same with what platform setting? 3? (Newbie that has not made much.)
@spheder
@spheder 4 жыл бұрын
Platform setting 6 seems to work great!
@fabiolarichards4506
@fabiolarichards4506 5 жыл бұрын
Did you use the 3mil or 5mil sheets?
@mueysaephan5779
@mueysaephan5779 4 жыл бұрын
The link in the blog says it's 3 mil sheets
@sewdonna13
@sewdonna13 4 жыл бұрын
@@mueysaephan5779 I used 5 ml and it worked great with auto blade and sticker paper setting on cameo.
@suem3596
@suem3596 4 жыл бұрын
What blade do you use on the Cameo 4 to cut acetate please?
@brendaparker5424
@brendaparker5424 3 жыл бұрын
Can you use the AutoBlade on the Cameo 4 to cut the laminate material?
@SilhouetteSchool
@SilhouetteSchool 3 жыл бұрын
Yes!
@mushroom_moss1694
@mushroom_moss1694 Жыл бұрын
Can cameo potrait cut 7 mil to 10 mil stencil sheet ?
@amandawoodmore8884
@amandawoodmore8884 4 жыл бұрын
Hey what kind of xyron machine do you use?
@loyalty773
@loyalty773 3 жыл бұрын
Cricut can make LV stencils.. can silhouette do that?
@janmontarsi.-blendangles7960
@janmontarsi.-blendangles7960 4 жыл бұрын
How many mils thick is your lamination sheets
@LeslieKailVillarreal
@LeslieKailVillarreal 6 жыл бұрын
you rock
@ashleyziegler4776
@ashleyziegler4776 4 жыл бұрын
Thank youuuuuu!!! I’m trying to make stickers and laminate them but can’t figure out my settings to cut through the laminate without sending it through my machine a million times.
@divinevalentin4035
@divinevalentin4035 5 жыл бұрын
I'm looking to buy the machine can you tell us what name brand your laminating machine is?
@brenda1braun
@brenda1braun 4 жыл бұрын
I couldn’t find her links and never can ? Anyone else know ? She doesn’t answer questions
@suzettebarte2304
@suzettebarte2304 3 жыл бұрын
I think you can buy whatever brand. Bought a cheap one at Bj's
@cindyn400
@cindyn400 5 жыл бұрын
Can I use the blade that came with my Cameo 3 or do I need a different one? Thank you.
@Hopeapotheke
@Hopeapotheke 4 жыл бұрын
I don't know if you found your answer, but your autoblade has a 3 setting. Just change it in the settings from autoblade to blade 3. I just figured that out myself lol
@cindyn400
@cindyn400 4 жыл бұрын
@@Hopeapotheke thank you so much for your reply, it is a big help!
@Hopeapotheke
@Hopeapotheke 4 жыл бұрын
Cindy Nielson any time! We are all learning together 😁
@kimmorin7847
@kimmorin7847 4 жыл бұрын
Can I use glass etching paste on these stencils and still re-use them??
@judithkain4150
@judithkain4150 4 жыл бұрын
Did you try it?
@kymleuck2729
@kymleuck2729 2 жыл бұрын
I cannot get my laminated paper to stay straight on the mat. It keeps moving around. Any suggestions? I tried taping the corners it did not work.
@SilhouetteSchool
@SilhouetteSchool 2 жыл бұрын
Sounds like you probably need a stickier mat
@game-sy4nb
@game-sy4nb 3 жыл бұрын
Hi what paper ? link please
@annetjiejonker9332
@annetjiejonker9332 5 жыл бұрын
Melissa would it be possible to show how to make a quilt stencil, please.
@radicalxedward8047
@radicalxedward8047 5 жыл бұрын
Does every chick own one of these CNC cutter doodads? That’s pretty cool. Would make some tiny stencils I’ve wanted to do for ages way easier. Not worth hundreds for a tiny stencil though. Guess I’ll have to keep looking.
@yarnovah
@yarnovah 4 жыл бұрын
Love my Cameo so much, you couldn’t pry it from my cold dead hands! For you, however, I’d suggest hand cutting stencils, like with an exacto knife. I wonder if this material would work with hand held paper punches or diecut machine dies?
@leisahardman9186
@leisahardman9186 6 жыл бұрын
Hello, Can you leave a link for where I can buy the adhesive for the stencil so it says down while I paint over it?
@angelrutan8427
@angelrutan8427 5 жыл бұрын
Michael's, Walmart, Amazon. They are very common. Just make sure you search for a Temporary Spray Adhesive. You don't want something so strong you can't lift it off the wood after you've finished painting it.
@simplesandy
@simplesandy 6 жыл бұрын
I was wondering if clear contact paper would work
@AnneGoggansQHHT
@AnneGoggansQHHT 3 жыл бұрын
Found this on a Friday in 2021 and was like.....how did she know it’s Friday 😂😂😂
@obiwankenobi265
@obiwankenobi265 3 жыл бұрын
Thanks for specifying the year so I know which Friday it was
@AnneGoggansQHHT
@AnneGoggansQHHT 3 жыл бұрын
@@obiwankenobi265 😂😂😂😂
@shio7735
@shio7735 3 жыл бұрын
I'm dying laughing at this comment! lmfaooooooo
@SolsticeJo
@SolsticeJo 6 жыл бұрын
What thickness laminating pouches do you use?
@amandaduso5343
@amandaduso5343 6 жыл бұрын
I am trying to do this with regular laminate paper - clear 5 mil and i have the same exact settings, and i only get a registration error?? Does anyone have any tips and tricks to help me. Thanks!
@a.stratton4482
@a.stratton4482 5 жыл бұрын
Hey my may moved around and then it started pulling up the stencil while working. Any ideas?
@drikaweb
@drikaweb 5 жыл бұрын
The mat is not so stick anymore. You can look on KZbin how to re-stick your mate or you can use painter's tape or Washington tape to hold it on the mat before cutting.
@lisarobinson3971
@lisarobinson3971 4 жыл бұрын
How do you do letters like "O" and 'e' that have a center that needs to be connected to the background when you are creating a word stencil?
@NINJUTSUguy
@NINJUTSUguy 4 жыл бұрын
I created my stencil in layers. There are two layers for the words. One is for the whole word and the second is for the middle of the letters. I simply stencil the one with the larger words first. And, once it dries, I place the stencil with the middle of the letters over the original words and stencil them. Awesome.
@bethrivenbark4632
@bethrivenbark4632 4 жыл бұрын
There are a couple of other videos showing how to do script stencils without layering. They work great! Just search for how to make any font into a stencil. Very simple to do.
@samanthalaycock5175
@samanthalaycock5175 6 жыл бұрын
will this work for the cameo 3. and stencil vinyl. i keep getting the registration error
@yarnovah
@yarnovah 4 жыл бұрын
“Registration” refers to the Print and Cut feature of the Silhouette machine. Turn off Print and Cut (follow directions for your version of the software).
Silhouette U 😍 1:1 Silhouette Help & Silhouette Video Tutorials 🔥 50% Off 1st Month
0:36
Silhouette School with Melissa Viscount
Рет қаралды 24 М.
Colorful Pasta Painting for Fun Times! 🍝 🎨
00:29
La La Learn
Рет қаралды 308 МЛН
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
Fool-Proof Reusable Stencils With Cricut
12:14
Makers Gonna Learn
Рет қаралды 111 М.
Silhouette CAMEO 4 Autoblade Isn't Cutting Deep Enough? Here's the Fix
15:42
Silhouette School with Melissa Viscount
Рет қаралды 151 М.
Cutting Stencils with a Silhouette Cameo
7:26
Jennifer Akkermans
Рет қаралды 12 М.
How To Make A Reusable Stencil With Silhouette Cameo
4:43
Erin Ensley
Рет қаралды 44 М.
Make a Reusable Stencil with Cricut & Apply to Wood Signs & Towels!
21:00
Having Trouble Cutting 7 Mil Mylar Stencils with your Cricut?
9:40
The Airbrush Garage
Рет қаралды 9 М.
Cricut Make Reusable Stencils!
9:16
Red Dirt Designs
Рет қаралды 60 М.
How To Make Reusable Stencils With Cricut
19:19
Makers Gonna Learn
Рет қаралды 760 М.
Colorful Pasta Painting for Fun Times! 🍝 🎨
00:29
La La Learn
Рет қаралды 308 МЛН