HOW TO MAKE SILICONE MOLDS - for resin casting - FUN WITH RESIN

  Рет қаралды 333,664

Red Rocking Bird

Red Rocking Bird

Күн бұрын

Пікірлер: 244
@nalla9398
@nalla9398 Жыл бұрын
As a super beginner I must say this is one of the BEST tutorials I've found to create what I'm searching for. Thank you so much!!!!
@RedRockingBird
@RedRockingBird Жыл бұрын
Wonderful of you to say thank you 😁 Happy crafting ❤️
@DianasYTChannel
@DianasYTChannel 2 жыл бұрын
I am so relieved you use the proper PPE when using resin. There are horror stories out there from people having reactions that range anywhere from rashes to serious respiratory difficulties. Ventilation, nitrile gloves, and a respirator are a must.
@RedRockingBird
@RedRockingBird 2 жыл бұрын
Most definitely Diana, many thanks
@confidentqueen7259
@confidentqueen7259 Жыл бұрын
I’m going through this now
@DianasYTChannel
@DianasYTChannel Жыл бұрын
@@confidentqueen7259 I’m sorry.
@RedRockingBird
@RedRockingBird Жыл бұрын
@@confidentqueen7259 do you mean problems to do with resin? 🤗
@michaelpearson1272
@michaelpearson1272 Жыл бұрын
I've used polyester resins the bad smelly stuff since 1979. At the beginning I was silly no mask etc. But back then no books. No video's. And professionals did not want to help you. So I soldiered on and taught myself and learned everything myself and more. Then professionals started to ask me questions and I got my revenge and gave them the same answers they did not give me. But it's different today. We do help each other to a certain degree. Back to mould making. Fill the area with some rice and pour it into a cup and waigh it that will tell you how much silicone you need to fill the mould. Once you make the piece you can fill the mould area with rice. Again that will let you know how much resin you need to fill the moulds. I'd like to add I had no health issues with resin. Now we know more about using it safely follow the rules. Stay safe
@LuzyWhitePhoenix
@LuzyWhitePhoenix 9 күн бұрын
I'm very grateful for this comprehensive tutorial, that also mentions protective gear as well as whether or not you have reusable cups! I've been thinking of making custom bases to some figurines I've got and now I have an idea of how to make a mold from a basic base as well as a shallow version with just the prongs to then create a different shape from. Your calm voice and reassurance also really helps as well, I'm sure I'll be much less anxious and less likely to make mistakes.
@RedRockingBird
@RedRockingBird 7 күн бұрын
Amazing, thanks for watching and I’m glad you enjoyed, great idea, I hope you get in well ✨
@astridguerrero1872
@astridguerrero1872 Жыл бұрын
Your voice is an angel talking, just loved this!
@RedRockingBird
@RedRockingBird Жыл бұрын
Aw thank you 😊
@user-gj5dt5ht4c
@user-gj5dt5ht4c 5 ай бұрын
WOW!!! This video is EVERYTHING!!! Rare for me to find vids that explains exactly what and how I need! 👏🏽👏🏽👏🏽 Bravo!
@RedRockingBird
@RedRockingBird 5 ай бұрын
Good to hear, thanks, best of luck with your projects
@gayatrijohnston
@gayatrijohnston 7 ай бұрын
Thanks a bunch for teaching. Had this resin for 2 years got sick now slowly getting better and hand wanders around the craft
@RedRockingBird
@RedRockingBird 7 ай бұрын
Good to hear you are getting better, thanks for watching, have fun with some crafts again soon I hope, I’d make sure I wore a good mask and PPE, all the best ❤️
@Perivale
@Perivale Жыл бұрын
Thanks for sharing this. I had the casting kit, just needed to understand the setup. Your instructions were perfect! I didn't have that lovely gadget to hold the silicone but I had building blocks. Again, thanks for sharing.
@RedRockingBird
@RedRockingBird Жыл бұрын
Wonderful, I hope your projects have gone well, enjoy 😊 thank you
@alteredLori
@alteredLori Жыл бұрын
I could listen to you all day long. So calm, so confident and mostly self assuring that even I can do this. thank you so much for your knowledge!!! Love the egg cups!
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, that’s really lovely of you 🥰
@jodr395
@jodr395 3 ай бұрын
This is a fabulous tutorial to see what’s possible with creating molds - thank you 🙏🏼
@RedRockingBird
@RedRockingBird 3 ай бұрын
Glad you think so, thank you 😊
@john8872
@john8872 Жыл бұрын
I just can't help but give at least a thumbs up because of all the resourceful tutorial and supplies. 1st video I watched and as a hobbiest already feel like i'm ready to start conquering molds. Thx. J
@RedRockingBird
@RedRockingBird Жыл бұрын
Definitely worth exploring the world of molds, I’m just filming some more right now for another video, thanks, happy hobbying 😁😊
@peterthrun2768
@peterthrun2768 Жыл бұрын
Great tip on weight vs. volume and heat to help with bubbles.
@RedRockingBird
@RedRockingBird Жыл бұрын
Glad you found useful, I’m in the middle of filming lots more silicone mold projects, thanks 😊
@runaroundsueaccessibletrav6357
@runaroundsueaccessibletrav6357 Жыл бұрын
I have a gadget addiction my husband calls me gadget girl like its my super power. You are living my dream life. Subscribed and like and now need to binge watch.
@RedRockingBird
@RedRockingBird Жыл бұрын
😂 amazing, there’s worse things 😂 I’m currently playing with some new gadgets and loving it, I have a cute handheld drill right now 😍 thank you and enjoy 💜
@paulysworkbench
@paulysworkbench 5 ай бұрын
The clear tape across the bottom of the mold is a pretty cool trick. Thanks for sharing that! I've also ordered a mold frame kit. That's what I have been missing. Cheers!
@RedRockingBird
@RedRockingBird 5 ай бұрын
Sure you will love it, I love mine, works a treat ❤️😊 thanks
@bellnorton1691
@bellnorton1691 2 жыл бұрын
They are adorable, I thought would be great for Easter.
@RedRockingBird
@RedRockingBird Жыл бұрын
Yes most definitely, and I’ll be making some more for Easter gifts ❤️
@roadstar499
@roadstar499 Жыл бұрын
Its amazing how your silicon molds don't stick and removal seems easy..thanks fir sharing
@RedRockingBird
@RedRockingBird Жыл бұрын
they just have to be really sealed with varnish. This is a great kit: amzn.to/3VBPEGA
@margaretdillinger5090
@margaretdillinger5090 2 жыл бұрын
You are so amazing with your wonderful gadgets. Wow
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, all a lot of fun 😊
@DianasYTChannel
@DianasYTChannel 2 жыл бұрын
Your egg cups came out so cute! And that little bunny is so adorable! 👏🏻😁
@RedRockingBird
@RedRockingBird 2 жыл бұрын
Thank you! 😊
@melaniebishop480
@melaniebishop480 2 жыл бұрын
I don't know if I will do this but it was really fun to watch. I love all craft gadgets. I'm eying up a 3d printer. Several years ago when my nephew got one I was in awe.
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, glad you enjoyed, 3D printers just offer so many possibilities, my brains a frazzle thinking of them all sometimes 😂❤️
@aravinth007vt
@aravinth007vt Жыл бұрын
Finally on the best part of youtube..🎉
@RedRockingBird
@RedRockingBird Жыл бұрын
Good to know and happy to have you over here, thank you 😊
@samwise3452
@samwise3452 Жыл бұрын
Excellent! Clear and concise explanations - thanks!
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, happy to read that 😁
@dolinasalter6749
@dolinasalter6749 Жыл бұрын
I'm new to resin and this was very interesting thank
@RedRockingBird
@RedRockingBird Жыл бұрын
Resin opens up a whole new world of possibilities, thanks for watching 😊
@anamonterroso3498
@anamonterroso3498 10 ай бұрын
Do you or someone makes custom made silicon mold?
@RedRockingBird
@RedRockingBird 10 ай бұрын
What is it you are after? I would love to offer this service but right now I just don’t have the time, best of luck
@briankuhn7396
@briankuhn7396 3 күн бұрын
You could print with ABS plastic and smooth it with acetone. This should give the mold a shiny/smooth surface as well.
@PolynHoare
@PolynHoare 8 ай бұрын
Thank you for sharing how to make selicon moldy and using resin
@RedRockingBird
@RedRockingBird 8 ай бұрын
You’re welcome, thanks for watching 😊
@shmebuloc
@shmebuloc 5 ай бұрын
you are so awesome!
@RedRockingBird
@RedRockingBird 5 ай бұрын
You are! Thank you 😊
@MarkRobinson555
@MarkRobinson555 Жыл бұрын
Really like your videos, they are very interesting and informative. Regarding the silicone mould material you use, how much will it stretch? I want to cast a small bowl/cup like structure, but the base of the cup is only about 8mm, through which I would have to remove the rest of the cup, once set. The cup is around 45mm diameter, would its removal through such a small hole rip the silicone so destroying the mould? How elastic is the silicone once set? Appreciate your thoughts on this please, thanks 😊
@RedRockingBird
@RedRockingBird Жыл бұрын
Hi, thank you, you would have to cut the mold open with a sharp knife to get it out, then hold it back together with bands or tape while you pour and cure, hope this helps
@MarkRobinson555
@MarkRobinson555 Жыл бұрын
Thank you very much, really appreciate your quick reply.
@RedRockingBird
@RedRockingBird Жыл бұрын
@@MarkRobinson555 you’re very welcome, best of luck with your project
@Meagain921
@Meagain921 Жыл бұрын
Brilliant. An eye opener…..Many thanks…subscribed🤗🤗
@RedRockingBird
@RedRockingBird Жыл бұрын
Aw thanks 😊 I have filmed some more silicone videos so lots more coming soon
@RedRockingBird
@RedRockingBird Жыл бұрын
And WELCOME
@karlalehnhoff6069
@karlalehnhoff6069 Жыл бұрын
Can I use glass figurines to create the mold? I mainly see plastic items used….??
@RedRockingBird
@RedRockingBird Жыл бұрын
You can yes
@uriel-heavensguardian8949
@uriel-heavensguardian8949 4 ай бұрын
Thanks for sharing
@RedRockingBird
@RedRockingBird 4 ай бұрын
Thanks for watching! ❤️
@dreamersridge729
@dreamersridge729 Жыл бұрын
thanks so much! very helpful
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, I have a few new silicone videos here : kzbin.info/www/bejne/iqiTopSiqMpsgNk
@ssddcc
@ssddcc 6 ай бұрын
Great video, step by step explanation and very pleasant listening to - Subscribed! During the curing process, if left alone, are there a lot of off-gasses produced where there is a concern about people in a different room?
@RedRockingBird
@RedRockingBird 6 ай бұрын
Thanks glad you enjoyed. I open the windows in the room I am doing this and then shut the door, happy crafting ❤️
@MarkRobinson555
@MarkRobinson555 Жыл бұрын
Excellent video, and really useful, thank you very much 😀
@RedRockingBird
@RedRockingBird Жыл бұрын
Glad it was helpful, thank you 😊
@CosmicDarkLord
@CosmicDarkLord Жыл бұрын
This was awesome. Also very peaceful voice makes it very easy to understand and quite therapeutic. I had no idea where to start when trying to start my first resin mold.
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, that's lovely, enjoy your craft time ❤
@lightbulbnirvana
@lightbulbnirvana 2 жыл бұрын
You are branching out from your air dry clay for sure! Nice work Sarah! 💗
@RedRockingBird
@RedRockingBird Жыл бұрын
Always doing lots of crafting…any form, I will always keep coming back to air dry clay on my channel though 😊 thank you ❤️
@user-gj5dt5ht4c
@user-gj5dt5ht4c 5 ай бұрын
@@RedRockingBird Wait! Is there a dry clay vid?? I need that now to create my unique shapes and then make the molds.
@IfDawidCanYouCan
@IfDawidCanYouCan Жыл бұрын
Thank you for sharing your technique and suggestions. My wife and I am thinking to learn how to make mold those we would can then use for unique Resin work. To buy them anywhere are expensive especially for beginners, so we are thinking to make our own molds instead of keep buying when we want to create something unique for putting in Gift box and in Christmas Sock for the grand kids. I believe, “Our World is a Shared Experience”… So, thanks again…
@RedRockingBird
@RedRockingBird Жыл бұрын
Most definitely, so nice to make something unique, I couldn’t agree more, enjoy and best of luck
@IfDawidCanYouCan
@IfDawidCanYouCan Жыл бұрын
@@RedRockingBird Thank you...
@sheriwilson4213
@sheriwilson4213 28 күн бұрын
When making a mold of an item, is the mold the same size as your original or will be it slightly smaller?
@RedRockingBird
@RedRockingBird 28 күн бұрын
The same size 👍
@Vhe_ekie
@Vhe_ekie 9 ай бұрын
Thank you for this 😊
@RedRockingBird
@RedRockingBird 9 ай бұрын
You’re welcome, thank you for watching ⭐️
@elizabethash3247
@elizabethash3247 3 ай бұрын
Could this be used on metal jewellery please?
@RedRockingBird
@RedRockingBird 3 ай бұрын
I would think so but I wouldn’t put anything precious in
@andreamcneilage5159
@andreamcneilage5159 Жыл бұрын
Wonderful can you share the link to the mold formwork that clips together
@RedRockingBird
@RedRockingBird Жыл бұрын
Thanks. ▶Mold Housing amzn.to/3HdUBRE
@damidraws_vt
@damidraws_vt 11 ай бұрын
This is really cool, but is there a version that allows for a shiny finish with the resin molds?
@RedRockingBird
@RedRockingBird 11 ай бұрын
I’m working on lots of variations at the moment and getting them lovely and shiny, coating the item in spray paint or varnish or resin, thanks, best of luck with your projects
@DianasYTChannel
@DianasYTChannel 2 жыл бұрын
I am excited to see what you can do with resin. I’ve just started using it and made Christmas decorations using resin.
@RedRockingBird
@RedRockingBird 2 жыл бұрын
Wonderful, thank you, next weeks video is air dry clay and resin
@DianasYTChannel
@DianasYTChannel 2 жыл бұрын
@@RedRockingBird Ooooh. 👏🏻👏🏻
@karlalehnhoff6069
@karlalehnhoff6069 7 ай бұрын
Hi! I love how professional and simple your tutorial is! I need help. I’m trying to make a mold for a crystal octopus I have. It’s actually a napkin holder and since it’s crystal it’s very detailed. However, it has no flat side. It stands on the tip of the tentacles on the bottom side and on its rounded head on its top side…how will I get it out? Could you send me the list of all your tools including the printer? Thank you!!
@RedRockingBird
@RedRockingBird 7 ай бұрын
These are the links in the description: US Supplies: ▶ ALL bit.ly/3TkFVWV discount code 10Rocking ▶Silicone Mold KIT letsresin.com/products/flexible-silicone-mold-making-kit?_pos=6&_sid=fdea2863f&_ss=r&ref=CXaxVhClJMHAcz& ▶Resin letsresin.com/collections/casting-resin/products/16oz-clear-epoxy-resin-kit?ref=CXaxVhClJMHAcz& ▶Color Powder letsresin.com/search?options%5Bprefix%5D=last&q=mica%20powder&ref=CXaxVhClJMHAcz&type=product%2Carticle%2Cpage%2Ccollection& ▶Heat Mat letsresin.com/products/resin-heating-mat-fast-resin-curing-machine-with-silicone-mat?_pos=1&_sid=ebc439d8f&_ss=r&ref=CXaxVhClJMHAcz& ▶Lets Resin Supplies letsresin.com/?ref=CXaxVhClJMHAcz& ▶Craft files letsresin.com/products/resin-polishing-kit?_pos=1&_sid=def9909c0&_ss=r&ref=CXaxVhClJMHAcz& ▶All other RESIN supplies amzn.to/3TP60vp ▶Speed Curer teexpert-tech.com/?ref=pJuYB6Id 10% off: RRB ▶Levelling table teexpert-tech.com/en-gb/products/teexpert-resin-companion-leveling-table-16x-12-us-only 10% off: RRB ▶3D Printer affiliate.geekbuying.com/deeplink.php?affid=3855&url=www.geekbuying.com/item/Creality-Ender-3-S1-Pro-3D-Printer-497276.html ▶Printer material amzn.to/4dtprnC UK Supplies: ▶Mold Housing amzn.to/3HdUBRE ▶Silicone letsresin.co.uk/products/8oz-silicone-mold-making-trial-kit?_pos=5&_sid=3eab79b35&_ss=r&ref=CXaxVhClJMHAcz ▶Resin letsresin.co.uk/products/copy-of-16oz-clear-epoxy-resin-kit?_pos=7&_sid=06c1345a3&_ss=r&ref=CXaxVhClJMHAcz ▶Heat Mat letsresin.co.uk/products/resin-heating-mat-fast-resin-curing-machine-with-silicone-mat?_pos=1&_sid=4b9427c70&_ss=r&ref=CXaxVhClJMHAcz ▶Craft files amzn.to/3WPQDDO ▶Speed Curer teexpert-tech.com/en-gb/products/us-only-teexpert-resin-curing-machine-upgrade-2-hours-quick-curing-epoxy-resin-dryer-machine-with-3-bigger-and-deeper-flat-trays-for-epoxy-resin-art-craft-casting-%E7%9A%84%E5%89%AF%E6%9C%AC?ref=pJuYB6Id 10% off: RRB ▶Levelling table teexpert-tech.com/en-gb/products/copy-of-teexpert-resin-companion-leveling-table-16x-12-us-only?ref=pJuYB6Id 10% off: RRB ▶3D Printer affiliate.geekbuying.com/deeplink.php?affid=3855&url=www.geekbuying.com/item/Creality-Ender-3-S1-Pro-3D-Printer-497276.html DISCOUNT CODE: NNNUKS1PRCR ▶Printer material amzn.to/3CXDOjh - C O N N E C T W I T H M E - ▶INSTAGRAM: instagram.com/redrockingbird ▶PATTERN SHOP: rockingbird.square.site/ ▶SUPPORT ME: ko-fi.com/redrockingbird
@RedRockingBird
@RedRockingBird 7 ай бұрын
This needs a lot more steps to make it happen and a new video on this I should make when I get time, there are a few other good KZbin tutorials on this let me see if I can find the name of the guy I’d recommend
@karlalehnhoff6069
@karlalehnhoff6069 7 ай бұрын
@@RedRockingBirdok! Thank you!!!
@ilovelacesandribbons
@ilovelacesandribbons 6 ай бұрын
Do you think dryed-clay would work with this type of silicon too?
@RedRockingBird
@RedRockingBird 5 ай бұрын
Here’s my video for this with air dry clay kzbin.info/www/bejne/eKOXg6l-jMeEfM0 It has to be 100% sealed to be able to use it or it will go all sticky
@CreativeDIYPurpose
@CreativeDIYPurpose 2 жыл бұрын
How strong is the odor ? Thank you for this tutorial ❤️
@redrockingbirdathome2696
@redrockingbirdathome2696 2 жыл бұрын
The door is sturdy, to make even stronger use wider planks to hold all together rather than thin ones like i did, but i love my barn doors, thanks
@CreativeDIYPurpose
@CreativeDIYPurpose 2 жыл бұрын
@@redrockingbirdathome2696 ty. How strong is the odor of the silicone when pouring?
@RedRockingBird
@RedRockingBird 2 жыл бұрын
On my other channel I made a barn doors and this comment got mixed up up sorry! The odour from the silicone is very low and then there is more of an odour from the resin, so I recommend a respirator mask, different brands are different, thanks
@CreativeDIYPurpose
@CreativeDIYPurpose 2 жыл бұрын
@@RedRockingBird thank you!
@Becky_lou_smuling
@Becky_lou_smuling Жыл бұрын
Awesome ❤ I’ve not tried making a mould yet but have the stuff lol ❤
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, super, I’m currently experimenting with more moulding, with this one you need to make sure the clay is sealed 100%. Enjoy, happy creating 🤍
@SYNC4ex
@SYNC4ex Жыл бұрын
This video is wonderful. I just got my kit in the mail. Am I correcting in seeing that A and B are used to both made the molds and the models?
@RedRockingBird
@RedRockingBird Жыл бұрын
No, A and B are mixed together so that the silicone rubber cures, (then you fill mold with resin or similar, not silicone) happy crafting
@joehimes9898
@joehimes9898 Жыл бұрын
It may have been said, but a resin 3-d printer can create insanely detailed prints that would yield better moulds. They are of such resolution that the layer lines are invisible.
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you for adding this, yes true, I only have FDM 3D printers currently, but I have a friend that has 3D printed me some resin models, so busy practicing moulding these for another video, all great fun. What do you make?
@jessicacox2005
@jessicacox2005 Жыл бұрын
I am trying out silicone to replicate wax models for jewelry work. Your tutorial was so nice and helpful, thank you! 🙂
@RedRockingBird
@RedRockingBird Жыл бұрын
Good to hear thank you and best of luck with your projects ❤️😊
@charleen_miguel
@charleen_miguel 7 ай бұрын
Hi Sarah! Can I put my air dry clay piece in the silicone like this? Or should I seal the piece first before creating a mold for it? Thank you for this video!
@RedRockingBird
@RedRockingBird 7 ай бұрын
Hi, Homemade Silicon Molds for Air Dry Clay - with air dry clay: kzbin.info/www/bejne/eKOXg6l-jMeEfM0 Take a look at this video, air dry clay needs to be 100% sealed, thanks for watching and enjoy your projects ❤️
@chasetheinflatablegod
@chasetheinflatablegod 5 ай бұрын
I need to make a mold of a hand with curled fingers. I have a skeleton with soft foam hands, and I’d like to make a mold of those to cast in resin. My only concern is getting the hands out of the silicone once the silicone is dry. Since the hands are cupped, I don’t think I could just pull them out. Any advice? (The hands were initially grabbing a pole, so think of that shape).
@RedRockingBird
@RedRockingBird 4 ай бұрын
Stents are needed and then you’d cut the mold open and hold together with tape/bands, a much longer process but achievable. Sorry didn’t see your comment till now, how did you get on?
@bradley_ytgaming5967
@bradley_ytgaming5967 Жыл бұрын
Hey I had a question,when making a resin mold what does it mean by pouring a 1:1 ratio.
@RedRockingBird
@RedRockingBird Жыл бұрын
1 part of resin A and 1 part of resin B. So if you measure 50g of part A, also measure 50g of part B and then mix together to make 100g of resin
@jodiesmith9576
@jodiesmith9576 Жыл бұрын
Thank you for your videos really enjoy. What kind of mask do you wear doing this plz
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, one that eliminates gasses too so you can’t smell anything at all when wearing, let me see if I can find the link
@dmmomma
@dmmomma 2 жыл бұрын
Ready when you are! I also want to end with a shiny surface so any tips are appreciated!
@RedRockingBird
@RedRockingBird Жыл бұрын
Currently trying to print with ABS to solve this, but finding it a bit tricky ❤️
@divingwithdutchess4765
@divingwithdutchess4765 7 ай бұрын
I hope you can help me. I misjudged how much I needed to make the mold. I ended up 1/2 inch short from the top. I live in a very rural area. Having to wait for delivery of more silicone. Can I add the new mixture to the already partially finished mold?
@RedRockingBird
@RedRockingBird 7 ай бұрын
I really think it should be ok, the silicone should stick to the silicone, just make sure you don’t touch it or get dust or grease in there in the meantime, I’d cover it over. The other thing you can do to bulk out the silicone is to chop up any other unused silicone molds you have into tiny pieces and mix this in with your fresh silicone and then pour it in, let me know how you get on, best of luck.
@WoodenItBeNice
@WoodenItBeNice 2 жыл бұрын
Thanks for this Sarah, I really like that mould from LetsResin so may well invest in one. Take care Sarah. Cheers, Huw
@RedRockingBird
@RedRockingBird Жыл бұрын
Nice to be able to reuse this over and over with different sizes, hopefully I’ll find some other uses for it too , thanks 😊
@RedRockingBird
@RedRockingBird Жыл бұрын
Nice to be able to reuse this over and over with different sizes, hopefully I’ll find some other uses for it too , thanks 😊
@joni22262
@joni22262 Жыл бұрын
Have you tried painting a epoxy layer on the outside of your 3-d items?
@RedRockingBird
@RedRockingBird Жыл бұрын
Not yet but I really need to, have you? Thanks 😊
@CarolinaGirlCreationZ
@CarolinaGirlCreationZ 8 ай бұрын
New to the idea of making my own silicone molds for resin, is any resin food safe, or do I need to specifically specify food safe?
@RedRockingBird
@RedRockingBird 8 ай бұрын
Once epoxy resin has fully cured correctly then it’s normally food safe, for example for the side/decoration of a chopping board, always best to check with the brand you use first though. I personally wouldn’t make plates and cups etc to use though presently
@jm-oq3kp
@jm-oq3kp 11 ай бұрын
Thanks for the video! Could the original object for making the silicone mold be made from ceramic? Or would this be too porous?
@RedRockingBird
@RedRockingBird 11 ай бұрын
A glazed ceramic yes, but I’ve not tried unglazed, I would image it wouldn’t work so well, but you could coat the ceramic in something like petroleum jelly I would imagine although I have not tried that yet either. I do love to experiment, thanks for watching and best of luck ❤️
@graceeugene125
@graceeugene125 Жыл бұрын
Hello! Thank you for sharing the videos, do you use different kind of resin for the mold and the one you in the mold? what are the differences?
@RedRockingBird
@RedRockingBird Жыл бұрын
Hi, the mold is made from silicone rubber, then once cured can be used for casting resin ❤️
@KristaBandito
@KristaBandito 7 ай бұрын
any advice on how to create a mold of a drumstick?
@RedRockingBird
@RedRockingBird 7 ай бұрын
I’ve not tried something so long with silicone, only this: kzbin.info/www/bejne/iGGrdIaVjq2VodU I would try first a horizontal mould but would also be interesting to try a long tall vertical mould, I’ll have a think, thanks for watching
@KristaBandito
@KristaBandito 7 ай бұрын
@@RedRockingBird thank you I appreciate it!
@RedRockingBird
@RedRockingBird 7 ай бұрын
@@KristaBandito you’ve really got me thinking about this now…I do LOVE a good challenge 😂❤️❤️
@RedRockingBird
@RedRockingBird 7 ай бұрын
@@KristaBandito can I ask what you hope to cast in the mould and if you want to use this to actually strike the drums? Just thinking about the strength of everything, if not just for decorative purposes or for cake making etc??? Thanks
@KristaBandito
@KristaBandito 7 ай бұрын
@@RedRockingBird I just want to cast a real drumstick and create a resin version with confetti inside but no, just decorative not to play
@MultiKwolf
@MultiKwolf 2 жыл бұрын
You are a life safer!!! i wanted to mold my air das clay .. for a long time.. tho i did seal it with a strong crystal waterproof sealant
@RedRockingBird
@RedRockingBird Жыл бұрын
If we’ll sealed it should work, I did another video where I did this
@Rachel-Louise
@Rachel-Louise Жыл бұрын
Thank you, lovely tutorial as always 😊 Can you please let me know where you bought the green tape you used on the bottom of the mold housing please?
@s.c.p.fundation5450
@s.c.p.fundation5450 Жыл бұрын
I think its just normal tape
@RedRockingBird
@RedRockingBird Жыл бұрын
you can use normal wide cellotape but it's tape from here amzn.to/3TP60vp scroll down to essential items.
@cupcakemum12
@cupcakemum12 Жыл бұрын
Hi. Can you tell me once you’ve made the silicone mould, can you melt the silicone rubber to make other silicone moulds?
@RedRockingBird
@RedRockingBird Жыл бұрын
Once it’s a mould it’s a mould. The only way I would reuse it is to chop it up in tiny bits and mix with new silicone and pour again
@alisofiane1449
@alisofiane1449 Жыл бұрын
Wonderful
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you 😊
@vikkiconnor1489
@vikkiconnor1489 6 ай бұрын
I am trying to figure out how to take my resin letters and make a mold from them to pour resin that will make the letters fillable for a kids sensory bin. It wont let me attach a photo, but I hope that makes sense
@RedRockingBird
@RedRockingBird 6 ай бұрын
You could do with the letters with sections out of the middle and then cast from those in silicone
@noonib2792
@noonib2792 Жыл бұрын
hi, I am so happy I found your video. I am trying to cast my tiny humming bird earrings but they are not flat at the bottom and I am trying to cast a sun pendant. Can you please share some tips on how to cast them please?
@RedRockingBird
@RedRockingBird Жыл бұрын
More coming later this year, you need to encase the whole thing, there are a few ways to do it
@farahk7523
@farahk7523 Жыл бұрын
i am planning to make a mold of a bottle, if the base of mold were too thin, can i make a base layer? will it stick together (the additional base and the original mold)
@RedRockingBird
@RedRockingBird Жыл бұрын
Hi, if you mean, pour more silicone in after it’s set? Yes silicone should stick to silicone, just don’t let any grease get between it
@farahk7523
@farahk7523 Жыл бұрын
great! thank you so much!@@RedRockingBird
@gabrielleschmidt1435
@gabrielleschmidt1435 Жыл бұрын
🎉Thanks for sharing this great video! I liked that you showed the boo-boo . It helps us to understand what can go wrong. 😊
@RedRockingBird
@RedRockingBird Жыл бұрын
Thanks, good to know, more silicone mold making coming soon in my channel too 😊
@gheorghecorneanu3511
@gheorghecorneanu3511 8 ай бұрын
Ai o voce tare placuta!
@RedRockingBird
@RedRockingBird 8 ай бұрын
Thank you ❤️
@quynhngo3017
@quynhngo3017 4 ай бұрын
I did make my molds at home like you but the molds I made not make my stuff shiny, but the molds I bought at the store make my work shiny and pretty, can you tell me what wrong I did ?
@RedRockingBird
@RedRockingBird 4 ай бұрын
If you make the item you cast in silicone shiny, the molds will be shiny, so add some varnish or spray lacquer and then make a new mold
@UgwaborBenita-kd8jj
@UgwaborBenita-kd8jj 7 ай бұрын
Please what is the name of the material used
@RedRockingBird
@RedRockingBird 6 ай бұрын
Silicone letsresin.com/products/flexible-silicone-mold-making-kit?_pos=6&_sid=fdea2863f&_ss=r&ref=CXaxVhClJMHAcz&
@bensonmayfield5636
@bensonmayfield5636 Жыл бұрын
Hi can you tell me please if its possible if you have a silicon mold ,if u linded it with say polaphene ,can you then make a silicon object threw using the original mold, Thank .P
@RedRockingBird
@RedRockingBird Жыл бұрын
I’m not quite sure what you mean, if lining with something else it sounds like it’s going to be a bit uneven/distorted by the film
@bensonmayfield5636
@bensonmayfield5636 Жыл бұрын
Hi thanks for your reply.what I mean is when I see someone make a epoxy resin item threw a silicone mold ,can I make a silicon item out of the original by say pouring silicon into the original mold. Thanks. P
@bensonmayfield5636
@bensonmayfield5636 Жыл бұрын
Or will,it stick together
@RedRockingBird
@RedRockingBird Жыл бұрын
@@bensonmayfield5636 with regular silicone it will adhere and stick to the silicone, but I have a video out hopefully in January where you can do this with something different not using mold release, so some people I’ve seen do your method with mild release too
@bensonmayfield5636
@bensonmayfield5636 Жыл бұрын
@@RedRockingBird Thanks
@AdvicefromDad
@AdvicefromDad Ай бұрын
Are these molds safe for making hard candy?
@RedRockingBird
@RedRockingBird 14 күн бұрын
Something to look into for each brand, that would be cool if so, thanks for watching
@JoanneHouston-o1l
@JoanneHouston-o1l 11 ай бұрын
Hi what is the plastic square thingy called pls?
@RedRockingBird
@RedRockingBird 11 ай бұрын
Hi, it’s this: shorturl.at/BPRS9 thanks
@susanbroomfield3868
@susanbroomfield3868 Жыл бұрын
I'm wanting to make Lotus Biscoff moulds. Can I use the actual biscuit to make the mould?
@RedRockingBird
@RedRockingBird Жыл бұрын
Funny you say that as I am currently in the middle of a Biscoff project
@PamelaChangeUr-Life
@PamelaChangeUr-Life 4 ай бұрын
I have a specific question and I’ve not been able to find it on the Internet and wondering if you are knowledgeable about terra-cotta clay I was looking for a clay that was air dryable for me to sculpt something and create a mold. My question is whether I can take the terra-cotta and create plaster molds and silicone molds as an example off of a terra-cotta clay sculptureand if I can do that for anybody reading this, what’s spray other than the mold do I need to use on the clay because I don’t want to lose the sculpt if anything goes wrong
@RedRockingBird
@RedRockingBird 4 ай бұрын
Hi, You would need to completely seal the piece, it can’t be porous in any way, resin is ideal for this. It’s something I want to experiment with more, sculpting and casting. Terracotta and airy dry clay are porous so on their own would just absorb the silicone and be ruined, I hope this helps
@jamieharrison5946
@jamieharrison5946 4 ай бұрын
Could the clay be coated in liquid latex rubber then resin be poured in it?​@RedRockingBird
@Kathyelyn
@Kathyelyn 6 ай бұрын
i know that the video is a year old, but i have a question - does it work, when i sculpt something out of clay and make a cast from silicone? because i need specific shapes for cosplay
@RedRockingBird
@RedRockingBird 6 ай бұрын
Depends on the type of clay and type of silicone. Air dry clay needs to be fully sealed and coated before it goes near this silicone
@jerrycurtis98
@jerrycurtis98 Жыл бұрын
You make some beautiful things. Maybe you can help. A friend coated a large project with resin, but he didn't use enough hardener. Is there any way to make the coating harden?
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, hmmmm that was a bit of a bumma, not so sure really, if it wasn’t salvageable any other way I think I’d with mix some more with extra gardener, or try and remove what I’d already put on. I’d take it as a learning curve for sure and turn it from something it was supposed to be into something else maybe, it’s a tricky one and really frustrating when these things happen I know, best of luck
@jerrycurtis98
@jerrycurtis98 Жыл бұрын
@@RedRockingBird My friend removed all of the uncured resin and reapplied resin mixed properly. Thanks!
@RedRockingBird
@RedRockingBird Жыл бұрын
@@jerrycurtis98 wonderful good to hear it worked out
@AliciaGarcia-lv2zc
@AliciaGarcia-lv2zc 2 ай бұрын
Can I use silicone mold to make another one.please let me know my name Alicia.
@RedRockingBird
@RedRockingBird 2 ай бұрын
Hi Alicia. Yes sure, make many again and again ❤️☺️
@michaelmason8944
@michaelmason8944 Ай бұрын
I would suggest using the mold you have to make the product, then use that product you made to make the second mold of that item, it will make it much easier to make the second mold, and won't have to worry about the silicone sticking to the first silicone mold
@kathys.3420
@kathys.3420 4 ай бұрын
What happends if u add liquid coloring?
@RedRockingBird
@RedRockingBird 4 ай бұрын
I wouldn’t add liquid colour, it likely won’t cure properly
@ironmeatsnbuds2870
@ironmeatsnbuds2870 9 ай бұрын
Do you think epoxy will ruin foam and if I send you a pic can you 3d print me something
@RedRockingBird
@RedRockingBird 8 ай бұрын
I currently don’t offer a printing service sorry. Depends on type of each
@little_misscrafty
@little_misscrafty 2 жыл бұрын
Hi can you cast successfully airdry clay items or do you need them to be coated with something, thank you ✨️ 💖
@RedRockingBird
@RedRockingBird 2 жыл бұрын
Hi, they definitely need to be coated, I made this video: kzbin.info/www/bejne/eKOXg6l-jMeEfM0 when i experimented with it, thanks
@little_misscrafty
@little_misscrafty 2 жыл бұрын
@@RedRockingBird thank you so much for getting back so quick and linking your video 💖
@RedRockingBird
@RedRockingBird 2 жыл бұрын
@@little_misscrafty items that are non porous all the way through are easier, but I’ll experiment more with the air dry clay, enjoy, thanks
@hanklaff2083
@hanklaff2083 Жыл бұрын
I need a couple of football badges( premier league ect).would you be able to make them and how much ,I agree lovely warm calming voice “nearly nodded off😂
@RedRockingBird
@RedRockingBird Жыл бұрын
TOO many people have said they nearly nodded off 😂😂 Super busy schedule sorry, no time to add any more in sorry
@Mixing-It-Up-with-Gigi
@Mixing-It-Up-with-Gigi Жыл бұрын
Will a standard respirator be sufficient? What about where they are drying?
@RedRockingBird
@RedRockingBird Жыл бұрын
I leave to dry in the ventilated room and shut the door. Mine is for all gases
@pedro-707
@pedro-707 6 ай бұрын
teach you how to make resin to make sculpture in a silicone mold?
@RedRockingBird
@RedRockingBird 6 ай бұрын
So you can produce multiple of the same product really easily
@naveenlodhi1850
@naveenlodhi1850 Жыл бұрын
Silicon ka kitna price hota hai mam please bta dijiye
@RedRockingBird
@RedRockingBird Жыл бұрын
It’s not cheap stuff, but try it out on small projects first
@jamessmallwood7448
@jamessmallwood7448 Жыл бұрын
if you 3d print them you have to let the print degas for about a week be for you mold it
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you, I still have lots to learn with the 3D printing, interesting, what does it do during that week? Thanks, Sarah
@jamessmallwood7448
@jamessmallwood7448 Жыл бұрын
@@RedRockingBird just make sure you cure the parts and clean really good.. then let it set in a window with some sun for about week or 2 or your rubber wont cure... it took me about 45 try's to do this until someone told me about that trick lol
@RedRockingBird
@RedRockingBird Жыл бұрын
@@jamessmallwood7448 I see thank you, I really appreciate it and will try that, does this work for PLA? Which is what I have here. Trying to print now with ABS but that’s a whole new struggle in itself but will keep trying 😊
@jamessmallwood7448
@jamessmallwood7448 Жыл бұрын
@@RedRockingBird most molds will work with pla and abs its resin that takes time
@jamessmallwood7448
@jamessmallwood7448 Жыл бұрын
resin printers
@reedbarrow4109
@reedbarrow4109 Жыл бұрын
Why do you need the double-sided tape? That is, why isn't the packing tape enough?
@RedRockingBird
@RedRockingBird Жыл бұрын
The times I relied on the green tape they didn’t stick, strong double side worked for me
@noteda6361
@noteda6361 Жыл бұрын
Try getting SLA resin 3D printer which can print smooth surfaces and incredible details. I have Elegoo Mars 3 and it's great.
@dragonflyrivera4308
@dragonflyrivera4308 Жыл бұрын
How large a mold does the printer make? …. Thank you so much
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you for this
@RedRockingBird
@RedRockingBird Жыл бұрын
Mine can make about 30x30x40cm if I remember correctly
@irismoran6085
@irismoran6085 9 ай бұрын
How do I hold the strawberry to make a mold?😬😵‍💫😵‍💫😵‍💫😵‍💫😵‍💫🤯🤯🤯🤯
@RedRockingBird
@RedRockingBird 9 ай бұрын
Can it have a flare base somewhere on the strawberry 🍓 that’s your easiest answer if so, if not that’s a whole new video, many have covered this and I hope to do a video at some point 😊
@christinayoumans9990
@christinayoumans9990 Жыл бұрын
What is the benefit of doing this versus purchasing a mold?
@RedRockingBird
@RedRockingBird Жыл бұрын
If you find a mold that is exactly what you require for a project then that’s fab, I like to make completely unique items and therefore making my own molds is super useful
@chiphill4856
@chiphill4856 7 ай бұрын
Customization
@katielyb
@katielyb Жыл бұрын
I thought it was better to measure epoxy by volume because the resin and hardner can have different consistencies.
@RedRockingBird
@RedRockingBird Жыл бұрын
The one I use here is let’s resin and they recommend weighing, other as you say measure by volume, so always read the specific brand instructions Thank you for watching 😊❤️
@karen.yeskaren.1611
@karen.yeskaren.1611 5 ай бұрын
You should not measure resin part an and b by weight. One of them is denser. You need to use liquid measurement.
@RedRockingBird
@RedRockingBird 5 ай бұрын
@@karen.yeskaren.1611 let's resin say to weigh for this one @letsresin
@karen.yeskaren.1611
@karen.yeskaren.1611 5 ай бұрын
@@RedRockingBird maybe it’s the resin I use but I used to weigh it and had trouble with curing.
@dauelsen6587
@dauelsen6587 7 ай бұрын
We are a liquid silicone rubber for mould making manufacturer.
@RedRockingBird
@RedRockingBird 7 ай бұрын
👋 nice to e meet you!
@dauelsen6587
@dauelsen6587 7 ай бұрын
@@RedRockingBird 🤝
@yvonnemarshall6308
@yvonnemarshall6308 Жыл бұрын
This was an amazingly detailed tutorial! I am someone very interested in starting a resin design business myself. I was actually wondering whether you completely started your studio and designs by being completely self taught? Or would you recommend doing a course/workshops to cut down costly mistakes and learning time? Many thanks 🙌🤍
@RedRockingBird
@RedRockingBird Жыл бұрын
Thank you. I have a BA hons degree in Furniture and Product Design, so leant many skills there and have learnt many more since too, but I have always loved art, design and making things with an absolute passion and if you learn your craft whichever way you choose I wish you the best of luck.
@yvonnemarshall6308
@yvonnemarshall6308 Жыл бұрын
Great advice, thanks so much for the insight ❤️❤️
@RedRockingBird
@RedRockingBird Жыл бұрын
@@yvonnemarshall6308 you’re welcome ☺️
How To Make A One Part Silicone Mold
18:32
Fairies and Fancies
Рет қаралды 44 М.
Жездуха 41-серия
36:26
Million Show
Рет қаралды 5 МЛН
Homemade Silicon Molds for Air Dry Clay - DIY Silicone Mould Making
10:37
The Secrets That No One Told You About When Using Resin
19:36
Steve McDonald Arts and Crafts
Рет қаралды 702 М.
2-Part Silicone Mold using Mold Star™ 16 FAST
14:24
Smooth-On Fan Channel: Made By You
Рет қаралды 438 М.
299. You WON'T BELIEVE HOW I Made These INCREDIBLE Resin Art Pieces!
20:50
DIY Silicone Molds - Excerpt
24:32
High Desert Observatory
Рет қаралды 890 М.
My Secret Hack for Making and Copying Silicone Molds!
8:08
Do as I Do
Рет қаралды 135 М.
Easiest DIY Silicone Molds-No Experience Needed!
10:47
Steve McDonald Arts and Crafts
Рет қаралды 10 М.
HOW TO MAKE SILICONE MOLDS - for resin and clay casting BEGINNER EASY
10:04
Let's Pour Silicone without instructions...
18:30
Jazza
Рет қаралды 2,3 МЛН