How To Make Skyrim VR Amazing With A Full Mod List Overhaul Wabbajack And Mo2 - Mad God's Overhaul!

In this video I will go over an incredible mod list which will install hundreds of incredible mods with the push of one button! This is Mad Gods incredible mod list for Skyrim VR! This is a demonstration and guide!
Honestly this is one of the most sublime experiences I've had in VR!
________________________________
My Discord:
/ discord
My Wabbajack Guide For Fallout 4 VR:
• How To Make Fallout 4 ...
________________________________
Mad Gods Mod List NSFW:
www.nexusmods.com/skyrimspeci...
Mad Gods Mod List SFW:
www.nexusmods.com/skyrimspeci...
Wabbajack:
www.wabbajack.org/
________________________________
0:00 - Intro
1:06 - Demonstration
2:10 - Clean Install
2:27 - Install Mad Gods Overhaul
3:20 - Install Wabbajack
3:30 - Install Process
6:30 - Run Mod Organizer 2
7:10 - Run Order (IMPORTANT)
7:43 - Outro
#skyrim #skyrimvr #skyrimmodded

[@DeadPixelGaming]

This VR overhaul is mind-blowing! It's an absolutely different game! I would highly recommend an RTX3070 or above! Enjoy!

[@mikeygallardo83]

Thank you for the clear and concise guide you saved me so much time!! I swapped over from F.U.S. to MADGOD using your guide with no problems. Could you do a video getting Mantella up running in this modlist? A Part 2 adding Mantella as a continuation to this guide would be great!!! Thanks again!!!

[@DeadPixelGaming]

@mikeygallardo83 thanks for the comment man 👊 if you've already installed mantella all you need to do it install the files you installed through vortex in Mo2 and change the directories in the config.ini. it's literally a 2 minute job 😁

[@mikeygallardo83]

@@DeadPixelGaming That's the Frustrating part I'm sure its super easy. I just dont know how to do it. I never used Vortex I even tried the Github Instructions and ended up with the same error. I'm new to modding, and this stuff's complicated. It's my first attempt at Mantella and modding in general I'm still learning. It's literally taken me a week of watching your your guides to realize I have no idea what im doing. I'm gonna take another crack at it today.

[@mikeygallardo83]

I did it, and in doing it found a hundred ways of how not to do it. I didnt have the mantella software in the same folder as the spell. some guy in the discord randomly mentioned it and that was my problem.

[@DeadPixelGaming]

I'm going to be honest with you if you've never modded before Mantella is a pretty hard one to start with! To confirm you've got madgods up and running right? I can help you on my Discord but I'll only be free Thursday. Work has been very busy!

[@allicedee]

Thank you so much, tried other guides before and gave up. Always conflicts between mods an crashes. This works very great so far.

[@DeadPixelGaming]

Always happy to see a message like this. Happy gaming!

[@Paramontana92]

Thanks alot for this video, this really helped!

[@DeadPixelGaming]

I'm glad it helped! Enjoy 😁

[@athistim]

I just upgraded from a 3060 12gb to a 4090 and bought a meta quest 3. I am so excited for this mod pack!

[@DeadPixelGaming]

Ooof! Nice upgrade! You'll love it man. Make sure you up your eye resolution

[@StaticFreighter123]

that’s bloody neat mate

[@DeadPixelGaming]

Thanks man 😊

[@VRDaD]

Noice! I was planning to do another video on Skyrim...it's only somewhere in my endless list of things to do :D

[@DeadPixelGaming]

Thanks man, it doesn't seem to be doing too well 🤷‍♂️. Man I have so many videos I need to get out but work is holding me back 😪

[@VRDaD]

@@DeadPixelGaming Give it time. My most popular video on skyrim took off about one week after publishing it.

[@clarebentley8738]

Thanks for this, looks amazing!!

[@DeadPixelGaming]

Thanks Clare 🫶

[@jurgenziewe9125]

At 4:03 (your video) on my PC (windows 10) when right clicking there is no "extract all" command and the pop-up window looks quite different to yours. How do I get around this please?

[@DeadPixelGaming]

Download 7zip if you don't have any extraction software

[@nathanterry7922]

no way this video came out the day i was looking to play again

[@DeadPixelGaming]

Good timing! I hope its useful for you 🙂

[@Paramontana92]

Crazy, I am just trying to get into it, so really happy to find this now!.

[@DeadPixelGaming]

@Paramontana92 good timing 😬 this is the best way to play skyrimvr!

[@TRIUMVIRATEMEDIA]

Hey bro, thank you so much. You got me started with your other videos on Skyrim VR could you possibly make a video about how to get Skyrim VR to look better without it being a crazy overhaul? My problem is is I'm playing off of a like low budget gaming laptop and I don't think it's going to handle The 200 mods that everyone suggests I get to make it look better. I just want it to look a little better not blow my mind. Thank you so much! I'm off to watch your AI chat video.

[@DeadPixelGaming]

Hey, I'm glad my videos are helping man! To be honest FUS (this video) is the lower end when it comes to resource usage compared to my other wabbajack video (MGO). I would recomend (if you have nexus premium) doing thr FUS process and removing the 4k textures and graphical changes manually through Mo2. That way you'll still get 180ish awesome mods without too much performance issues. But if you're working with a brick of a laptop check my how to mod Skyrim VR video which uses Vortex instead and has the absolute basic essentials then work from there.

[@dakawans83]

I thought I knew what I was doing when modding. I was wrong, the organization blows me away. I couldn't get the left hand XP32 fix to work anymore! This set worked right out away after a fresh skyrim install. I bought a new graphics card with double the memory for it.

[@DeadPixelGaming]

What graphics card are you using? Mo2 is good but if you're struggling with it use Vortex. Any advice just jump on my Discord and ask. What GPU did you get? The FUS pack is a lower end pack, if your GPU is up for it try the Mad God pack. You can have both installed simultaneously btw.

[@dakawans83]

@@DeadPixelGaming 3070, Maybe it was because I was downloading your Fallout 4 VR pack at the same time. But who cares the SAPPHIRE NITRO+ RX 6800 XT has 16gb and its faster.

[@shane2095]

This is an amazing guide thank you! There are a ton of game play changes right? Is there a good way to get a grip of what to expect control wise and what not before starting this all up?

[@DeadPixelGaming]

Hey! I'm glad you enjoyed the guide. Have a look on the nexus page they'll give you the most amount of information they have alternatively there's also the mad gods discord which I linked in the video, have fun and don't forget to subscribe 😁

[@ennayanne]

love spending days downloading something only to fail at the end for no reason. Skyrim modding is functional as always i see!

[@DeadPixelGaming]

Days downloading? Right so did you log out and back in to Nexus? This is a bug Wabbajack are currently trying to fix.

[@ennayanne]

@@DeadPixelGaming it just can't seem to find the MGO dyndolod file, I googled it and it isn't available anywhere online publically either

[@matthewfenwick680]

This looks amazing! Looking to mod for the first time... However I only have a 3060ti.... I'm guessing this pack with be pretty intense on my pc. Is there a lighter version or other mods you would recommend for my Pc?

[@DeadPixelGaming]

Yes absolutely, check my channels videos. I made a guide for the FUS mod, its very similar and looks incredible but is much lighter on resources. Very similar thumbnail 👍 let me know when you see it and don't forget to subscribe 😁

[@mikechrome6392]

Hello, great video, thank you so much! One question- I tried to disable the realm of lorkhan mod in mod organizer so that I can start the game vanilla, but it is not working. Do you you have any ideas how I can use this mod package but start fresh like a regular game?

[@DeadPixelGaming]

You can disable it on the left hand side of Mo2 in the modlist. Make sure to make a new game after doing so. You should then get the vanilla experience

[@DeadPixelGaming]

Alternatively go to th mod folder where ROL is and delete the archive

[@nzquads7831]

This has all installed OK but it starts with me in a prison cell where I can choose where to start playing the game. I just want to start the normal storyline on the back of the cart. How do I do that?

[@gandonmaster2135]

Hello, I have a problem. When I start downloading the assembly (minute 5:37 in the video), the nexus site menu always appears with a choice of fast or premium download, and I always confirm the slow download, but this menu does not disappear and I am again asked to choose slow or premium download. And so with every mod

[@DeadPixelGaming]

You'll do that with every mod until its done. You need premium for it to load all automatically.

[@gandonmaster2135]

@@DeadPixelGaming I understood, thank you

[@DeadPixelGaming]

No problemo!

[@gandonmaster2135]

@@DeadPixelGaming I have a problem again) I decided to install vortex according to your video and your mod recommendations and everything worked out! but I wanted to return to the assembly related to Wabbajack. And when I started to click install again, an error appeared. I realized that perhaps the vortex was to blame and completely removed it along with the mods and also removed Skyrim VR. And installed it again, in the end it again writes an error when starting to download Wabbajack... Sorry for bothering you with this, but I just don’t know what to do.

[@BiggDaddyDann-ib5xp]

Do you have to buy and install Skyrim Special Edition for this Mod to work?

[@DeadPixelGaming]

No, just Skyrim VR. In Nexus you download mods for Skyrim VR in the special addition area. You also have to subscribe to me for it to work 😝

[@snoody1466]

Everysingle mod it says installation failed when i try to run the wabbajack, why is this happening?

[@DeadPixelGaming]

Did you try log out and then log back in. It's a common bug.

[@BiggDaddyDann-ib5xp]

I have installed the Mod 4 times now, and the Mod itself is working great. My problem is every time I try to start a new game it starts me off in Realm Of Lorkhan. Is that were I should be? How do I start the quest were I'm at "I am Camping in the woods"

[@DeadPixelGaming]

Why did you install it 4 times? Just disable ROL in Mo2. Also if you're loading a game it shouldn't put you in Lorkhan. Lorkhan is just a place you can tp to once a day and use the crystals to go where you want.

[@BiggDaddyDann-ib5xp]

@@DeadPixelGaming I kept thinking I did something wrong. I started in ROL every time I tried to start a new game, I went to Discord in the Mad God Skyrim new install for support and had a Moderator tell me that is how they have the Mod to load now. Thanks for trying to help.

[@nnn1hhh1]

I have issue when i run wabbajack It says dont run wabbajack as admin and im not doing that !!

[@DeadPixelGaming]

You need to run it as administrator. It sounds to me like a firewall/anti virus issue. Make sure you're not deploying it in a protected folder.

[@alessandrocernuzzi]

For the last three days I've been trying anything I could find online, but all I got is a black screen with the Skyrim logo, and it stays like that. Any ideas? I'm running it on a 3080 12Gb, 5950x, 64 Gb ram. FUS seem to be running, but not this mod list. I can't understand why.

[@DeadPixelGaming]

How long are you waiting for? First launch compiles all the mod files and takes quite some time. If you see in my video I look down (in the black screen) after a while the skyrim logo shows up. Give it more time on the black screen, at least a whole minute. More if you're using a HDD instead of SSD. If you still have issues go on to my Discord and I'll try help you.

[@alessandrocernuzzi]

@@DeadPixelGaming Thank you for the reply! It stayed like that for 20 minutes or so, then I think it obviously won't work. Funny thing, now not even FUS works, Mod Organizer won't even launch Skyrim VR 🤦 MDO is the same, just the Skyrim logo floating in darkness forever.

[@alessandrocernuzzi]

@@DeadPixelGaming I went on your discord, thank you again!

[@dominikblack8943]

I just ordered a new PC with i7 13700f and rtx 4070. Would this work?

[@DeadPixelGaming]

Absolutely, you'll be able to play this in VR in ultra, decent specs. I'm running with an R7 5800X3D which isn't as good as your CPU, but I've got a 4080s. Have fun, if you get stuck let me know

[@stjah69]

Hello, thank you for your video. It doesn't work for me. Installation fails When I look at the mods folder. It's empty. But I've located them in the Wabbajack software. Please help me.

[@DeadPixelGaming]

Hi there, go to the cog in wabajack, log out of your nexus profile then log back in and click start.

[@stjah69]

@@DeadPixelGaming Thank you for your reply. I found the solution. I had to put the game in English. (I'm French) :) But I have another problem. When I launch Modorganizer it tells me that I have an Overwrite problem. I don't know what it is. The game launches anyway :)

[@stjah69]

@@DeadPixelGaming I managed to repair Modorganizer. I really like the mod. But the problem is that everything is in English. I can't switch the game to French. There are too many mods in English.

[@DeadPixelGaming]

The overwrite warning box that pops up when you run Mo2 is just a warning to tell you Mo2 is locked so you can't mess with it while in game

[@DeadPixelGaming]

I'm afraid MGO is fully English

[@berndo3038]

Followed the video word for word and steam vr just crashes for me :/ No idea why either.

[@DeadPixelGaming]

Start steam VR before you start anything else. Also, what rig are you running?

[@berndo3038]

@@DeadPixelGaming I figured out the issue, I never ran the game on Steam I just installed it and then went on to install the mods so it didn't generate the initial files.

[@DeadPixelGaming]

@@berndo3038 gotcha. Might pin that along with some other bits tbh

[@ElegantVR04]

It has been loading for hours for me at Download for mgo classic dyndolod output quality 1073333-1-931-1715736422.7z While loading slide. Is that normal?"

[@DeadPixelGaming]

If you're not premium it will take long. If you are premium you will be capped at your Internet speed. It's a HUGE pack.

[@fatlenalbo2239]

Is it possible to deactivate mods and add your own?

[@DeadPixelGaming]

Yes it is, through Mo2 you can disable any mod on the mod list.

[@epicgamer4273]

my game is crashing whenever i press the "start new game" in skyrim, any fix?

[@DeadPixelGaming]

What specs does your pc have?

[@nykz2358]

same here

[@epicgamer4273]

I got it to work, I honestly don't remember how though

[@nykz2358]

@@epicgamer4273 Didn't expect you to reply lmao. Thanks! Idk what caused it tbh but after running an old save and then starting a new game it just works.. Got grip controls on index working too now, smh they are very hard to activate tho. (meaning that I have to grip VERY hard) Any ideas? Put the Mod Setting on the lowest value (4) already.

[@DeadPixelGaming]

New game or loading an old save can fix it. Some people find they are stuck in the ground.

[@nzquads7831]

Does this work with Virtual Desktop?

[@DeadPixelGaming]

Yep. I use airlink because I don't have issues with it and I have a dedicated W6router. But it'll work with any connection to be honest.

[@TheLegendaryTaco]

im getting a 7z file instead of a wabbajack file. not sure how to fix this

[@TheLegendaryTaco]

nvm, i figured it out

[@DeadPixelGaming]

Glad you got it mate. You'd need to extract it most likely

[@kronoseth1800]

Could a 2070 super and i5 9600K run this?

[@DeadPixelGaming]

Not sure about that, the 2070s is a beast for the 2xxx series I had one myself but the cpu isn't great. You should be alright I think you may just need to downgrade some things.

[@kronoseth1800]

@@DeadPixelGaming Thanks, I'm definitely going to try it

[@DeadPixelGaming]

Let me know how you get on, it'll be good to know so I can advise others

[@kronoseth1800]

@@DeadPixelGaming Had to turn off some community shaders due to fps drops. Still experimenting to find a good balance but right now it runs very well. I'm impressed! Thanks for the awesome tutorial and tips 🙏🏻

[@DeadPixelGaming]

Hey, I'm glad it's working well! It's a really good mod pack. I made a guide on FUS which is still good but for lower spec PCs check it out maybe it'll work better for you, you can install it in a different folder and jump between each other. Don't forget to subscribe 🤣❤️

[@novagb6717]

i'm stuck in sneak with this mod, really annoying

[@DeadPixelGaming]

Hey, so one of the mods uses your height to sneak or not. So it'd like real life. You can just disable it in Mo2. Can't remember what it's called.

[@novagb6717]

@@DeadPixelGaming hi i'll have a look, i like to play seated so its causing a problem

[@the_devils_ivory4838]

Woupd it run on a ryzen 7 5800x with rtx 4070 and 32gb ddr4 ram

[@DeadPixelGaming]

Yes you'd have no performance issues at all

[@the_devils_ivory4838]

@@DeadPixelGaming thanks for the fast reply I was debating on eather the 7800xt or the 4070 what would you recommend I will be using quest 2 aswell

[@DeadPixelGaming]

@the_devils_ivory4838 erm. The 4070, but I'm an Nvidia fanboy so I'm the worst person to ask hahaha. I'm rocking a 4080S

[@the_devils_ivory4838]

@@DeadPixelGaming just an update everything works great I'm using steam link from quest 2 and added a few extra silly mods like auto tune bears and become high king and other daft mods but runs perfectly thanks for the video tutorial and response letting me know the 4070 was good for it