HOW TO MAKE YOUR 4.6 2V SOUND CAMMED FOR FREE

Yes, i know. I yelled at you in the title.

[@zlwut]

Just an FYI this wasn't meant for you to drive with just idle.

[@Prestiged_peck]

Can still hurt it even at idle, causes a lean Condition that has a tendency to melt things.

[@dragonslayer1483]

@@Prestiged_peck cars run lean at at idle naturally

[@Prestiged_peck]

@@dragonslayer1483 I've since learned this and also found out how far off your idle can be without hurting anything.

[@dragonslayer1483]

@@Prestiged_peck yeah I still wouldn't recommend this on a car you care about though. You'll end up forgetting to plug it back in and go driving eventually lol

[@Prestiged_peck]

@@dragonslayer1483 oh yeah no I did the unplug the MAF method when I was young and dumb. Real hard to forget it because It would stall as soon as it was in gear.

[@Gkitchens1]

You know, if you installed a vacuum pump for the brake booster and did some tuning you could totally keep the ghost cam. You could then fashion something to quiet the sound of the vacuum leak too

[@timclarkjr1222]

96-04 mustangs gt/cobras don't have vacuum brake boosters, they have power steering assisted boosters

[@centraltexasfoxbodies]

Lol these cars use hydroboost.

[@solow_hb2933]

2006 ford crown vic. Im listening 👂 😀

[@oldozerman]

Hey don't my huge vacuum leak sound strong!! 😂😂😂

[@fredekrueger42]

😂😂😂🤣

[@cheeko_914]

350whp with just 44cc heads, stage 1 cams, and intake/exhaust mods? You won't even make 350 to the flywheel. Maybe 280-300whp max.

[@thronefitness252]

Yeah no hate I like the car but there’s no possible way that is 350 wheel.. that’d be about 400 to the crank

[@codcade]

If anything it’s probably lost power with the drop in compression and boost cam lol

[@P71ScrewHead]

@@codcade too funny..lol

[@centraltexasfoxbodies]

Those are aftermarket trickflow heads that flow way more than stock pi heads, also has cams, intake mods and exhaust, it's possible with good tuning he can be around 350 whp.

[@cheeko_914]

@@centraltexasfoxbodies its literally not possible. I know nearly everything about these engines

[@Wolf-dx1cl]

No one do this please, all jokes aside

[@j.t.cooper2963]

Florida man syndrome in full effect. 😂

[@leosleo3601]

Honestly when the vacuum was disconnected it didn’t sound canned at all it sounded like a bad vacuum….. I can tell cause I’ve been around cars long enough to no what to listen for

[@Mikeymike66]

Hey man.... No way in hell are you pushing 350 to the wheels 💀 it's a 4.6 2v even with FBO and a cam it's max at best 320 WHP

[@mikep594]

Trickflow heads change everything about a 2v

[@Mikeymike66]

@@mikep594 this is true but I'm not sure about this 350 whp though

[@ghozty_2162]

Yea older mustangs are slow tbh the 13-14 are fast

[@zombieslayerlct6749]

With trick flow heads intake and stage 3 comp cams with big injectors and fuel pump it a pi 4.6 can make around 400hp

[@2vcrew782]

Yeah but isn’t the car going to run extremely rich? I have an 02 GT and I’m saving up to do a gen 2 coyote swap. For the money you dump into a 2V you can make much more base line power with a coyote for under $5600

[@thronefitness252]

Good luck bro hope you end up getting that done 👍🏼

[@2vcrew782]

@@thronefitness252 thanks! It’s a rather easy swap. You only need coyote motor, new 8 bolt flywheel, power package and the gas pedal. The coyote will drop right into the same engine mounts as the 4.6 2V with no modifications.

[@thronefitness252]

@@2vcrew782 damn yeah that doesn’t sound too bad when are you going to do that? I’m sure the new edge will be faster than a new 5.0 since it’s much lighter. Do you have to swap to the MT-82 trans too?

[@2vcrew782]

@@thronefitness252 this spring man I’ll let you know and keep you posted. FoxCast KZbin Channel has done a new edge coyote sway. And nope I can use my TR3650 5 speed. I know my 02 GT was the first year for the Tremec 3650. It’ll bolt right up to the coyote only think is new edge is 6 bolt flywheel, coyote is 8 bolt So you have to get an 8 bolt flywheel. If you watch some videos it’s like it was meant to be in the car the only thing I would recommend like I’m going to do is building the transmission mine has 200,000 miles on it so when it comes out I’ll build it before it goes back in

[@2vcrew782]

@@thronefitness252 The only thing the 4.6 L 2 valve is such a reliable engine

[@al-mubdizahir8704]

after you pull that connection from the throttle body can you drive it like that?

[@rexman2062]

No do not drive it like that just let it idle don’t even rev it up unless you wanna distroy your Motor

[@simplyGenesis-fav]

Hello, hey I got a question, I have an 02 GT Conv, Automatic, It drives with a wabble, after putting new rims and tires, it still has the wabble and it kinda does a hard pull at around 45 to 50 MPH, I have taken it to 2 places, 1 says its the rear end differential and the other says its the tranny. You said you changed your diff, what is doing the same or did u change cus u when from auto to manual?

[@genericnativeamericankid4836]

My 1999 ford f-150 has the 4.6 2v and I want to see if I'll do the same but it's a triton so I'm not sure

[@pvrrpghxst7867]

Go for it make sure you get vacuum leak

[@jeramoto1253]

This is also a triton

[@jeramoto1253]

All modulate are triton

[@centraltexasfoxbodies]

Triton is just name they used in the trucks, like Lincoln used the make intec. I think that's how it's spelled.

[@MadsWorld34]

yep it may be free until you burn a valve or the side of a piston. you go ahead and do it.

[@MadsWorld34]

oh and its going to run lean not rich.

[@brandonbenchic1242]

Yes lean as it causes too much heat and melted motor lol if gone for too long

[@codyramos3200]

It will make the car run rich or as rich as possible by the ecu. ..the ecu will add a ton of fuel the unmetered air is picked up by the o2 sensors .. this can be seen by looking at fuel trims +30 bank 1 +30 bank 2. . Same thing as putting a full exhaust + throttle body + intake plenum + cai.... ecu reads more oxygen in exhaust so it startes adding more fuel .. can manipulate a/f by putting tape around the inside of maf housing lol. Faster proms demonstrates this with a crown vic on dyno .

[@Reggiestreet]

That thing has like 211 hp to the wheels

[@adamrog6327]

Love the mustang but why is a camshaft upgrade cost alot for the mustang for parts and labor the ls platform I can get cams and heads for 2k with install

[@williamlopez4934]

The old vacuum trick...lol

[@jonathonpoloski917]

This is exactly the people who should not be posting performance videos. They teaching people how to mess their cars up. Lol. Engine light is on and what not. 😂

[@codyramos3200]

Guy does say it will run rich, throw codes, not a good idea to daily drive like this.... but doing this wouldn't really mess anything up as it will just make your car run like shyt.

[@kingzack2048]

Damn she growling something crazy😁

[@334_david]

Will this work for the 4.6 l mountaineer?

[@2vcrew782]

It’ll cause a huge vacuum leak. Your computer will see the lean condition and dump fuel making your gas mileage fall through the floor

[@BatesRacing]

Chop chop 😎

[@layakalathahmawanimadahmat7655]

BUT YOU DID DO WHAT YOU ADVERTISED SO ITS COOL

[@danallen9913]

Lmao hahaha that's something a 16 yr old would do in high school..don't to this please

[@JAMIE_ATKINS]

I wouldnt have...lol

[@ItsPainnz]

who got a 300+hp grand marquis here?

[@P71ScrewHead]

2:58 freakin Christmas tree..lol

[@Anonymous_Music]

4.6 2v?

[@ethanpartain8460]

I’m thinking about doing this. Is it safe for your engine?

[@Djmakeherdrip999]

Not exactly. Its a vaccume leak you create. It could technically burn a piston. Do NOT drive it like that, u wanna have fun just keep it only idling like that. Dont do it for long or a lot and youll be fine

[@busystuff23yearsago15]

No not at all

[@tristen4439]

How what bad

[@neosam8053]

my drift newedge with the sameish setup made 328hp.. idk why all these guys are gettin hardons over you sayin it has 350hp lol

[@jayjay7160]

Uh isn't this not a good idea? That's a giant air leak? Ya I just finished the video this sounds like the worst advice to give somebody 🤦🏻‍♂️

[@austingudmunson7657]

Now you have a vaccine leak lmao just get cams

[@huntercox1859]

Making it lean huh nice

[@diegobaeza6821]

It works on every car

[@charlesbarkly4305]

But how it running after that

[@abitoffcenter383]

I HIGHLY suggest that you do NOT do this!!! There's a reason vacuum leaks are bad. Plus you'll save yourself the embarrassment when someone calls you out and wants to run you. This is one of those 🤦‍♂ really, moves. Imho. Although I do like one thing about people like this. Their money!! Either on the street, at the track, or in the shop. All looks the same in my bank account. Y'all be safe out there!

[@bobg3221]

FYI it will work for the expedition. My buddy has the same 4.6 L and that’s what he does.😂 he actually drives it like that I don’t think that’s very healthy but hell it’s not my vehicle

[@TorquePerformanceGa]

We all see that u still have a vaccume leak the red line..... engine is way to dirty to ever have been pulled and got head work done..

[@scottkeeton956]

Cool

[@dougsadler5923]

That just makes a lean miss

[@eastonogg3402]

Is this a joke

[@ianhowe007]

350 wheel 😆😆 😆

[@kennethpowers8995]

Umm, 94-95 Mustang definitely didn’t have a 4.6 lol Pushrod 5.0 actually. And this is horrible to do to your engine, if you are unaware what a vacuum leak is, you shouldn’t be working on engines.

[@03mm24]

95's were 4.6 buddy

[@WaxScum]

@@03mm24 They were not

[@03mm24]

@@WaxScum I stand corrected, I was thinking 96, my apologies to OP also

[@PooPatti]

Actually a pushrod 4.94 in thoes years, not an actual 5.0

[@busystuff23yearsago15]

@@03mm24 😂buddyyy

[@6.0owen33]

Nice theft light lol

[@skrip2143]

It’s not pushing 350

[@whocares3724]

Does it cause any damage

[@Lestergreen77]

Reaper Asylum 17.1 would be lean, not rich

[@that5.0tho74]

Of course it does 😂 and trust me its not worth it Edit: trust me u rather spend on a real cam than to do this 😭

[@juanray2614]

@@Lestergreen77 what do you mean by lean?

[@Lestergreen77]

@@juanray2614 it’s not getting enough gas and risks overheating the cylinder

[@kayjglasjones2244]

just get a cam guys. lls

[@fordchevinman4614]

350 hp laughing

[@centraltexasfoxbodies]

Are you mad cause you're still stock or what?

[@Devin.Plyler]

Can u drive it like that’s?

[@eliseogutierrezlujan8966]

I wouldn't recommend it to drive like that

[@Devin.Plyler]

@@eliseogutierrezlujan8966 why

[@mikethelegend1101]

Just dont

[@flaboi8998]

😂😂😂😂😂

[@Brokenbcg]

LMFAO 350 wheel?!

[@centraltexasfoxbodies]

It's possible.

[@sbfnation2535]

Looks like stock heads to me

[@centraltexasfoxbodies]

How can you even see the heads?

[@sbfnation2535]

Look where the valve cover meets the heads if they were trickflo it would be a356-t6 aluminum but ay who knows I’ve seen stranger things

[@centraltexasfoxbodies]

@@sbfnation2535 you can't see the front of the heads with the valve covers on...

[@sbfnation2535]

@@centraltexasfoxbodies I didn’t say the front of the heads. I said look where they meet the heads

[@centraltexasfoxbodies]

@@sbfnation2535 how can you tell what material the aluminum is made out just by looking at it?

[@rustyhenry3692]

Calling it a turd why you own it if that's what you think of it couldn't afford a thing else...

[@mustanggarland24]

Cool trick bro!

[@stangnutlx]

this dude is clueless

[@pakkmanndagoat2931]

You’ll come out cheaper to buy cams 😂

[@edwardarsiaga3569]

Lol

[@layakalathahmawanimadahmat7655]

Why are you talking about the car and not the video content stated? Another deceptive attempt to get likes

[@youtubeuser5424]

Lol just no.