HOW TO: MAKE YOUR ZERO 10X WATER RESISTANT

[@michaelp3ddesigns]

Thanks! In Canada a similar silicone is Permatex® RTV Silicone Adhesive/Sealant 16BR Black, 80-mL, or any RTV silicone also rated for electronics. Still can't beleive the Apollo City knockoff of the Zero9 has sealant everywhere but the front of the battery compartment. Where it matters most.

[@milordas]

do you want it submersible? :) btw, sealing from inner side would be more estetical

[@davidagiel8130]

Being from Singapore you'd think having an IP rating out of the box would be a must. It's the only thing holding me back from getting a zero scooter, and this looks like way too much hassle for me.

[@asphort]

Do it for the Zero 9 please

[@Slayblaze]

I was wondering what a full sealing project on my 10x would be like, so thanks for sharing! Great job, very clean. I've already waterproofed a few of the spots shown here but I see I have more work to do to get them all. Thank you 👍🛴

[@relax2658]

The zero 10 x is not rated at ip67?

[@spraitukas]

@@relax2658 no ip rating at all. Driving mine through storms without waterproofing 🤷😎

[@mrgrieves6729]

What would you advise to waterproof the vertical leds on the Zero 9 ?

[@marekchomiak2102]

Why PEV doesn't do this when assembling the scooters... ???

[@kindzius]

What sealant do you use?

[@FalconpevSg]

We use threebond Japanese sealant. It’s viscous and quick drying

[@audemaraureada7495]

Is this easy to remove?

[@esaujacob3744]

What exact type of sealant did you use?

[@Fionnafire]

Yeah how can they make a tutorial without telling what tools to use???

[@pauliman1098]

Im just saying, won't this make the scooter completely unrepairable

[@FalconpevSg]

Good question, every time you repair it, you will have to reseal which hopefully isn’t that often

[@martinmyers4397]

Afterwards would this cause an overheating problem?

[@mrfifo4700]

Hi. Should we make some adjustment with motor?

[@FalconpevSg]

Yes you can find it here kzbin.info/www/bejne/hni2hqx_m517m6c

[@drealnapster6320]

What about the motors ?

[@FalconpevSg]

Dreal Napster motors can take in some water so it’s not that big a concern.

[@drealnapster6320]

Falcon PEV cool perfect

[@lokamsoeung8692]

may i know all e-scooter wheel are water proof right?

[@mitjamusic1487]

I've done it right now. Lot of work. I bought it from a guy which gave the scooter to a offical servis for waterproofing. Did a bad job. I was cought in rain for 10min.Today when i opened the scooter there was half cm of water inside. All wet.. did all this in video and much more seeling all around the rubber gasket and around plastics of rear and front lights. I think you can't make waterproof thight, lot of holes, and small gaps at the LED beneath the deck. The reason that i opened the deck is becose my front light turn on when i turn on the scooter. I blow dried all the electrics but still the front lights turn on. Does someone know what's the reason and what to do? Itstarted doing this after that short ride in rain. Sometimes the lights turn off after 2 seconds, or even more than couple minutes. If i turn my lights on they work with no problem. My question is if it's ok if i leave it as is, or it's better that i cut the front lights cables and not risk a spark or something? Please comment and advise

[@HanleysHatchlings]

@FalconPev did you seal up all connectors inside the deck also as it didn't show this. Thanks

[@Bemx2k]

There is one little problem , after sealing every gap of the battery compartment the temperature of cell goes up about 8-9'C then you need to remember not stress it too much

[@darvida95]

how did you test that ?

[@Bemx2k]

@@darvida95 I have done the same with my first escooter

[@darvida95]

@@Bemx2k Yes I understand but how did you check the temp of the battery before and after waterproofing it. Do you think that It will increase the chance of damaging the battery by overheating it?

[@kalvinrhone901]

@@darvida95 crickets...

[@relax2658]

The zero 10x is not rated ip67?

[@medino9058]

what type of silicone is that

[@FalconpevSg]

Threebond silicone

[@klipschorny]

can you pay to have this done before purchase?

[@quentindamien9488]

Bonjour quel est la threebond que vous utilisez ?

[@SeBi1896]

Is there such a thing for the IO HAWK Legend (Kaabo MANTIS) 42-52V Configuration Auto-Switch for 18.5Ah battery?

[@FalconpevSg]

It’s universal so it can be used on almost any scooter

[@seekporo4090]

hi im wondering what about the charging ports?

[@FalconpevSg]

Seal them up with screw on caps

[@jjswigger8591]

im confused when u need to unscrew in future.. it wont be stuck? please explain @@FalconpevSg

[@mitjamusic1487]

​@@jjswigger8591i think you can buy screw on caps

[@ashleybishton742]

Would be nice if they could do this all for you so we don't have to. We always have to pay a premium so they should offer a first class premium service. The owner shouldn't have to do this.

[@GadgetInspektor]

Unbelievable that they don’t waterproof this 2000+ Dollar outdoor vehicle with sensitive electronics by factory. Any cheap rental crap standing around in the streets seems to being able to handle rain.

[@FalconpevSg]

Hello the stock scooters come as water resistant but it isn’t waterproof. What we are doing here is making it waterproof. So that is the difference.

[@GadgetInspektor]

@@FalconpevSg Oh thank you. So light rain wouldn’t be an issue? I own a Zero 10x 60v and i’m very scared regarding this.

[@MonkeyDude1999]

Best channel ever! Thank you so much 😊

[@FalconpevSg]

Wow, thank you!

[@bigtom6746]

I am thinking about waterproofing my Segway/bird dual battery es-4 800. I’m guessing that I would follow the same procedure as you have done? Any tips or advice would be really appreciated, thanks in Advance & keep up the good work.

[@exile55]

Look up CorrosionX on KZbin. It's been used for about 30 years to waterproof anything. It last about 6 months depending on the type. I use it on batteries, electronics, and even on the bearings of the wheels.

[@davidagiel8130]

Aren't Segway already IP rated? The max is IPX5

[@HanleysHatchlings]

@Facon Pev can i ask that sealing the scooter will this not cause the battery to overheat without air flow?

[@FalconpevSg]

But there isn’t much of an airflow to begin with.

[@HanleysHatchlings]

@@FalconpevSg so these batteries can be sealed off with no issues of over heating and won't effect it? Am just curious as other scooters can catch fire

[@FalconpevSg]

@@HanleysHatchlings depends on what kind of battery you are using and what scooter?

[@HanleysHatchlings]

@@FalconpevSg I have the exact same scooter Zero 10x i am thinking of doing the waterproofing but was curious to know if any issues with battery overheating have arisen. Thanks

[@FalconpevSg]

@@HanleysHatchlings no issues with battery overheating on the 10X

[@sohaibmahagri5037]

What kind of silicone should I use and is there an alternative to this I'm having issues finding this exact model you showcasing in the video I actually have been able to find it but it cost way too much for a sealant is there anything special about this sealant

[@FalconpevSg]

Hello we do sell this sealant here www.falconpev.com.sg/products/threebond-moisture-curing-sealant?_pos=4&_sid=3a93179ca&_ss=r

[@kuraki5205201]

ip68?

[@TheBlacktoska]

zero 9 water proofing boss?

[@David-mh8sw]

useful video

[@FalconpevSg]

Do help share it

[@Maltmeister1]

Best thing is to just not take it out in adverse weather,your looking to get hurt with the power these scooters have.I don't take mine out for two reasons,,safety and it's a pain to clean.

[@ratchfordgeorge]

what if you're caught in the rain?

[@Maltmeister1]

@@ratchfordgeorge I don't get caught in the rain,,the first inclination of adverse weather the ride stays put

[@dnbshaggy]

I use mine to get to and from work, doubt my boss will accept rain as a reason not to come in.

[@Maltmeister1]

@@dnbshaggy exciting to ride a pev daily for work commute,rain or shine 👍✌🇨🇦

[@davidagiel8130]

@@dnbshaggy get a ninebot max for wet weather, IPX5, and IPX7 on some internals, but they only have a 350w motor.

[@MKKM-fw4qp]

Hi. I thought that Zero 10x was waterproof from the beginning :) I'm surprised

[@MKKM-fw4qp]

So riding in rain may cause any problems with scooter? Should I be scared durinng ride at rain?

[@NewsExpressPH007]

@@MKKM-fw4qp Me too Z9 here. Im riding it when rains, LOL. Now I know, i would not do it again. :)

[@ratchfordgeorge]

@@MKKM-fw4qp all zero scooters do not have an ip rating so, you should not ride in the rain,

[@eiceys4612]

Is it permanent or removable ? waiting for your anwer to order ty

[@FalconpevSg]

Why do you want it removable?

[@eiceys4612]

@@FalconpevSg in case you have to open to fix or repairs somethings. Is it permanent or removable?

[@FalconpevSg]

@@eiceys4612 every time you open things you have to break the seal

[@jjswigger8591]

so how do we do that? k looks like a hassle! @@FalconpevSg

[@adriankas4213]

NICE BRO ..

[@jasecee8992]

This should be done at factory for all scooters before leaving for sale. Disappointed !!!

[@FalconpevSg]

no scooters ever is made waterproof like this

[@СергейВоронцов-м2х]

This is done incorrectly, all contacts in the inside of the deck must be shrinked and the ends must be sealed and so far. Very poor waterproofing, this cannot be done

[@Syncere20]

Why don't you just dip the whole entire scooter in epoxy resin ?

[@troublemaker77777]

The main thing what you have to do is to waterproof a deck. Its not waterresist and this peace of rubber do nothing! You have to silicone a top if your deck, otherwise your job is useless.

[@The330racing]

If you ever need to get that controller apart, won't be fun. Easier to spray with something like corrosion-x.

[@husse843]

Nope, its easy to get of the back cover with silicon, no problem there

[@jjswigger8591]

dfuk are u talking abithu its 8 screws .. a monkey can doit

[@pangchung1321]

Very awful.. Silicon will not work after exposing to weather

[@FalconpevSg]

Silicone?? It’s what’s used to protect your windows sills

[@jjswigger8591]

yeah but we neeed to open it later... it wont be able wtf ????@@FalconpevSg

[@mitjamusic1487]

Buy a kind which is for outdoor use not for bathrooms

[@kamuid9375]

good tutorial with awful song

[@FalconpevSg]

Appreciate that

[@jarke1988]

COngrats..just ruined the scooter

[@FalconpevSg]

How so

[@mpg869]

Kenneth Franz. You're ruined.