Amazon news! Thank you. I have quite a lot of these sensors, so will also be interested to see how the battery life compares.
@r.z.95007 ай бұрын
Each encryption needs more power. 😉
@KPeyanski7 ай бұрын
Great let us know the results
@chrislambe4007 ай бұрын
I have 15 of these connected to a Shelly Mini Gen3 over bluetooth proxy. Stable as a rock. The zigbee firmware is pointless of you have bluetooth proxies. You lose the ability to turn off the silly smiley (comfort is a a combination of temperature and humidity not just a range in both) You also lose the ability to calibrate and correct the temperature and humidity. In ZHA there is no ability to add a temperature offset but in Z2M there is.
@KPeyanski7 ай бұрын
Thanks for this comment. I love when someone is talking from experience.
@kevin4rsl7 ай бұрын
I have a shelly 1, shelly 2.5 and shelly 1 pm connected to home assistant and the shelly app. Would these work to connect the sensor? And can you please point me in the direction to get it connected? Thanks!
@chrislambe4007 ай бұрын
@@kevin4rsl These are all gen1 shelly devices and do not support bluetooth proxy with the origina shelly firmware. Any shelly with plus in the name or gen2 or gen3 written on it will support bluetooth proxy with stock shelly firmware. It is just a checkbox in the local shelly interface
@HiruS223 ай бұрын
I don't use zigbee but can't you just create a new entity based on this but offset by whatever you needed? That's how I calibrated/corrected the temperature sensors in my Blink cameras.
@k1600gt7 ай бұрын
Kyrill - you are simply the best!
@KPeyanski7 ай бұрын
Thank you very much :) Are you going to try it ?
@k1600gt7 ай бұрын
Yes. The upload was working I use Zigbee2mqtt and the device is paired and shown. But at the moment only the battery level. O will wait a few days and will have a close look at it. Actually the error is ".. exception while calling from Zigbee2mqtt converter....Definition has no endpoint."
@cnn08887 ай бұрын
Thanks for the video. Will it work with sonoff zigbee bridge? Thanks
@StephenPinn7 ай бұрын
Great work!! Thank you
@KPeyanski7 ай бұрын
Thank you too! Are you going to try it?
@eyalhe29557 ай бұрын
thanks allot for your amazing video, i add my it to my LYWSD03MMC-z to zigbee2MQTT but i got a problem - the type of the device after add it to ZigBee is unknown and the temp and humidity is unknown as well - do you have any idea how to solve it?
@KPeyanski7 ай бұрын
Hi, please check this page - www.zigbee2mqtt.io/devices/LYWSD03MMC.html and if it is still not working ask in the z2mqtt forums
@garysteo33987 ай бұрын
Thank you for this video. Question does it work with zigbeetomqtt
@KPeyanski7 ай бұрын
yes, it does
@garysteo33987 ай бұрын
Great thank you
@xtremeideaz7 ай бұрын
Hi Kyrill, will it work with Zigbee2MQTT ?
@tannermorris89567 ай бұрын
That’s my question as well!
@KPeyanski7 ай бұрын
Yes, it works flawlessly with Zigbee2MQTT
@BrianBlakGuldager7 ай бұрын
@@KPeyanski Cant get it to work on Z2M it it showes up in enterties shows battery but not temp and humity?
@sabamimi47907 ай бұрын
@@KPeyanski Strange, for me :flashing OK but apprears as unsuported in Z2MQTT (like @tonyteltube2 mentioned above)
@xsrplayerx6 ай бұрын
@@BrianBlakGuldager yeah it happens to me also... Any solution found?
@krdesigns7 ай бұрын
quick question... my device did connect to my zigbee, however how long till it update the information to HA? Mine seems to be in flat liner? Any idea?
@tonyteltube27 ай бұрын
Followed this process and when adding to Zigbee2MQTT it is saying device not supported - Unsupported LYWSD03MMC-z - any suggestions?
@thermionicdude20447 ай бұрын
Same issue here, now cant reflash it back to Bluetooth. Any ideas how?
@xsrplayerx6 ай бұрын
Same issue...
@sshah8767 ай бұрын
Awesome, Hey have you tested LORA devices? if yes will look forward to your LORA sensors tutorials ...cheers
@KPeyanski7 ай бұрын
Not yet, but I want to learn more and test something interesting...
@sshah8767 ай бұрын
That would be great, since the traditional IOT devices cannot cover larger property easily but LORA can!! easily, would look for a diy or Cloud free solution.. :) cheers@@KPeyanski
@mikeneron2 ай бұрын
I went through this and updated a couple devices to the Zigbee firmware, but how do you flash the firmware back to stock? The 2 devices I flashed to Zigbee no longer show in the TelinkMiFlasher.
@KPeyanski2 ай бұрын
To restore to BLE, use the Zigbee OTA file with the same number device as described here - github.com/pvvx/ZigbeeTLc
@antoniomazabandes54197 ай бұрын
Hi Kirill, as always super interesting content. Just one thing, do you know how to reset the LYWSD03MMC. I'm a bit handy and as it appeared in my HomeAssistant with the Xiaomi BLE integration and only the signal level appeared I started to do strange things and now I need to reset it. Thank you.
@caseylasalle7 ай бұрын
To reset the Xiaomi Temperature and Humidity Monitor sensor, you can try these steps: Remove the back cover of the clock while it's working Connect the "Reset" and "Gnd" metal points near the battery with a metal conductive material for more than 7 seconds The clock will restart, restoring the factory settings The monitor will restart, restoring the factory settings and clearing previously saved data You can also try replacing the batteries with fresh batteries. The screen may blank out, and the device may display the current data correctly.
@BigBird22027 ай бұрын
Love your videos keep up the good work thank you
@KPeyanski7 ай бұрын
Thanks. Such words help a lot! Are you going to try this btw?
@ronm65857 ай бұрын
Thanks Kiril.
@KPeyanski7 ай бұрын
Thanks, do you have such device Ron?
@ronm65857 ай бұрын
@@KPeyanski No sir, I don't.
@simonsayshomeassistant7 ай бұрын
Hi mate, I tried this but it will not connect using ZHA, any ideas?
@ombreeevid7 ай бұрын
Hi Kyrill, nice video. There was a HA update early Feb which made these sensors no longer connect to the BLE integration annoyingly and could not work out a fix myself other than converting my two sensors to Zigbee as well. They worked for a couple of days fine but only getting updated every 5 mintues with HA so rather inaccurate data showing in HA. Following that they simply stopped working altogether, the sensor itself froze on the the same screen all the time and only update the temperature reading if I remove and reinsert the battery. The sensors no longer connect to my HA at all, if I run a scan for the Zigbee device they're not being picked up either, tried short circuiting and everything, nothing works. Also, now cannot even figure out how I'd be able to put back the original Xiaomi firmware or the BLE firmware as the sensors are now Zigbee and the Telink flasher would connect via Bluetooth. Anyone/you know how can the original firmware be restored once these are Zigbee devices and not BLE?? I may just need to buy new ones as these two seem to be bricked with this whole HA issue then conversion to Zigbee. Thanks!
@geesharp66377 ай бұрын
Can we get the link to the github project? Just want to read about it. Once it is Zigbee, how do you update it? Is it still also running bluetooth?
@KPeyanski7 ай бұрын
Sure, I will add it in the next 10-60min cause I have something that i have to do right now
@KPeyanski7 ай бұрын
I added the link in the video description
@norie30967 ай бұрын
Thanks!! I ll have to try this
@KPeyanski7 ай бұрын
Have fun and share the results :)
@gregs37917 ай бұрын
and how is range vs bluetooth? any difference?
@KPeyanski7 ай бұрын
Good question, but I don't know the answer. Maybe someone who did some test this will answer...
@lifeai18897 ай бұрын
when will esp32h2 be supported it would support all the 443mhz protocol
@KPeyanski7 ай бұрын
not sure about that....
@VsevolodNikiforov7 ай бұрын
hi, how to transfer LYWSD03MMC from atc firmware to zigbee?
@ClayBellBrews7 ай бұрын
Nice; great info.
@KPeyanski7 ай бұрын
Glad it was helpful! Will you try it?
@000Cypher7 ай бұрын
thank you for your videos mate
@KPeyanski7 ай бұрын
My pleasure! Are you going to try this?
@000Cypher7 ай бұрын
Sure, I have 3 of them and strugling with bluetooth (and previous flashes) 👍
@CristiCojita7 ай бұрын
5:46 - What desk is that?
@KPeyanski7 ай бұрын
Ikea Idasen desk - I have a video about it in my channel
@mcride17 ай бұрын
How to upgrade from old zigbee firmware on sensors to new versions? (It's now "-z" makred inside HA)
@BigBird22027 ай бұрын
Your video is very clear but I have Thermo Beacon and they are not compatible
@KPeyanski7 ай бұрын
You can buy one for test they are not that expensive
@iainhay28237 ай бұрын
Been running these on zigbee for a while, they do seem to drain the battery faster though but I'm hoping the recent firmware update has improved this. The ability to change the comfort temperature range or turn off the face is very nice.
@KPeyanski7 ай бұрын
Yes, the battery should be a lot better now, but we will see…. At the end of the day i prefer a little less battery life than regular disconnects and even worst to work only via xiaomi app
@javituh7 ай бұрын
@@KPeyanski i have 3 of them using BT thought shelly's. Do you still recomend swaping to zigbee?
@KPeyanski7 ай бұрын
@@javituh if they work fine right now then no! But you can try with one of them just for fun 🤩
@iainhay28237 ай бұрын
@@KPeyanski I never had the disconnect problem but I prefer the zigbee anyway for these. Certainly not using the app!
@KPeyanski7 ай бұрын
Yes, I like Zigbee better than Bluetooth
@izosa7 ай бұрын
another Xiaomi Miaomiaoce MHO-C401 support zigbee convertion and Zigbee2MQTT and has E-Ink display for better visability :)
@KPeyanski7 ай бұрын
Thanks for that. Do you have such device?
@izosa7 ай бұрын
i have 4 devices in production and seems stable. regular update this devices and battery usage is fine@@KPeyanski
@syukrishahabuddin46187 ай бұрын
I followed the steps, but theres no zigbee firmware to flash. Any idea?
@BOERYBOERY7 ай бұрын
Use the link in the movie 4:45 min-sec
@tannermorris89567 ай бұрын
It shows it in degrees C in the pictures. Is there a way for it to show it in F?
@KPeyanski7 ай бұрын
In HA: Go to settings > system > general > and choose either C or F. On the device: Press the button and hold for 2 seconds (or connect "reset" to "gnd" they are above the battery for LYWSD03MMC): This Switches temperature between Celsius and Fahrenheit. The change will immediately appear on the screen.
@paulminott1507 ай бұрын
Tried it and it worked but shows up F on Home Assistant but C on the sensor? Any fix for this?
@KPeyanski7 ай бұрын
In HA: Go to settings > system > general > and choose either C or F. On the device: Press the button and hold for 2 seconds (or connect "reset" to "gnd" they are above the battery for LYWSD03MMC): This Switches temperature between Celsius and Fahrenheit. The change will immediately appear on the screen.
@paulminott1507 ай бұрын
connect "reset" to "gnd" worked . Thank you. @@KPeyanski
@rjjanssen80727 ай бұрын
Unfortunately not successful. After flashing only bat level shows in Z2MQTT, both temp and humidity are null. Many Z2MQTT error messages as well. Tried different resets both device as well as in Z2M. In the end had to delete the device. Now it is just a stand alone device.
@xsrplayerx6 ай бұрын
Same problem :/
@JDSchuitemaker7 ай бұрын
Anyone experiencing that after pairing the device does not respond and the flashing options do no appear: 1. Disable and then enable the Bluetooth on your computer. 2. Then close the tab you were trying to connect from to the sensor and open a new time. 3. Then start the pairing process again.
@dablet7 ай бұрын
video starts 2:28
@KPeyanski7 ай бұрын
what do you mean?
@rickasisco7 ай бұрын
Now make the SwitchBot Curtain 3 Zigbee instead of Bluetooth :)
@KPeyanski7 ай бұрын
Not possible for now, but you can try Matter ;)
@henkvpn7 ай бұрын
19:32:15: Searching for devices 19:32:21: Connecting to: LYWSD03MMC 19:32:25: Hardware Revision String: B1.5 19:32:25: Software Revision String: 0159 19:32:25: Firmware Revision String: 2.1.1_0159 19:32:25: Detected Mi device 19:32:25: (!) Version: 2.1.1_0159 is temporarily not supported (!) 19:32:25: Disconnected. what to do
@sergiofuchs74027 ай бұрын
How can I reset this device ?
@caseylasalle7 ай бұрын
To reset the Xiaomi Temperature and Humidity Monitor sensor, you can try these steps: Remove the back cover of the clock while it's working Connect the "Reset" and "Gnd" metal points near the battery with a metal conductive material for more than 7 seconds The clock will restart, restoring the factory settings The monitor will restart, restoring the factory settings and clearing previously saved data You can also try replacing the batteries with fresh batteries. The screen may blank out, and the device may display the current data correctly.
@jeremyvedrine78935 ай бұрын
22:13:27: (!) Version: 2.1.1_0159 is temporarily not supported (!)
@adfjasjhf7 ай бұрын
I'm not fan of the clickbaity title.. We all know that this only applies to the Xiaomi temperature sensors and no other device from different brands.
@KPeyanski7 ай бұрын
This is for all devices that are using TLSR825x chips and they doesn't have to be Xiaomi
@adfjasjhf7 ай бұрын
@@KPeyanski That's not the point. The title makes it look like this is created for any bluetooth device.. Even this is not for all devices using TLSR825x as there needs to be a custom firmware for each device. You can't just flash LYWSD03MMC Zigbee firmware to e.g. MHO-C401
@NoCPU7 ай бұрын
@adfjasjhf in the content creators defense, he does not use the word "any" in the title at all. So the title is semantically accurate
@adfjasjhf7 ай бұрын
@@NoCPUFor a non native english speaker it might mean the same even if the word "any" is not used. People can search for "Change Bluetooth to Zigbee device" This also means that they are looking for a "universal" tutorial, not device specific. This video is already shown for me as a second result.
@scorpionnse7 ай бұрын
@@adfjasjhfas a solution. Learn english and narrow down your search. Hope that helps
@andrewborntrager79097 ай бұрын
Boring, not "boaring"😂😂😂
@KPeyanski7 ай бұрын
Correct 👍 Not sure what is happening to my writing lately I’m doing more and more mistakes and i blame autocorrect for that. I’m becoming lazier
@mbam20007 ай бұрын
For some reason, I’m not getting “Zigbee Firmware: 03MMC_v0120.bin” Instead I’m getting "Beta Firmware: ATC_v47.bin”, please what am i doing wrong?
@MrJoo797 ай бұрын
You can download the BIN file from the URL shown in the video and flash it with that
@alv1nxx7 ай бұрын
Is it possible to flash it back to BLE? ... as it is now Zigbee, how can I flash it back? or is it still advertising via BLE so the flasher can see it?
@KPeyanski7 ай бұрын
Yes, you have to use OTA update in ZHA for example
@alv1nxx7 ай бұрын
@@KPeyanski and you can flash BLE or original FW via Zigbee-OTA?
@captshadab7 ай бұрын
hi. i did it. there is an option for show or hide smiley but apparently it doesnt work. smiley remains on screen and on zigbe2mqtt the toggle remains off. any idea for the same