I love this guy sense of humor he's awesome. Just wish it was all of his great general knowledge and capability
@turfnsurf93672 жыл бұрын
Thank you very much for this info. My fat bike is BB is measured exactly 100mm, and I was ready to order that length.
@MrJob913 жыл бұрын
I love this series
@debbieschwartz31322 жыл бұрын
Can you get shorter crank arms (165mm) for the motor for Bafang or Bosch motors? I love your sense of humor. Keeping it fun. Im enjoying your videos
@MichaelBelue3 жыл бұрын
Well I wasn't ashamed before...but now I'm thinking maybe I should be.
@JohnnyNerdOut3 жыл бұрын
Haha, don't be! be proud of what you got down there!
@waxie20083 ай бұрын
I have exactly 70mm, which bb size should i choose
@squidnortty62352 жыл бұрын
Please help my bottom bracket is 73mm and I’m determined to get a bbso2b but the motor bb length is 68mm what should I do?
@Lil2Lit Жыл бұрын
I got a Haro boulevard according to the quick measuring I did at a family members house I meant to say it's 79.375mm width and 1 3/4 I wasn't paying attention got my darn measurements mixed with my rear/ the damn forks
@JohnnyNerdOut Жыл бұрын
Sounds like you measured more than just the frame 🤔
@Lil2Lit Жыл бұрын
@@JohnnyNerdOut my heads all wacked out trying to find a motor that'll fit this bike
@Lil2Lit Жыл бұрын
@@JohnnyNerdOut I fixed my comment I'd love some help not much help from anyone about how to get a motor on my specific bike
@billbogar83563 жыл бұрын
John, the floor was littered with ty wraps! Clean the floor dude before the shoot! ( just kidding). lol
@JohnnyNerdOut3 жыл бұрын
Honestly though you’re right. I’m kind of spastic when I film sometimes “ no time to clean, grab the camera!”
@coldcrush12 жыл бұрын
Losing my mind trying to find the bottom bracket and spindle for a 1995 Cannondale R400. I narrowed it down to a 68mm bracket but don’t know the specs for spindle and crankset.
@mluc111110 ай бұрын
How often do you lubricant your bottom bracket? During riding time?
@imjonathan67456 ай бұрын
Lubricant? Yeah yeah
@brianflynn71482 жыл бұрын
I have converted my bike and I love it. But my wife’s bike is a 68mm and the diameter of the bottom bracket is larger than my bike. Mine is 44mm O. D. and hers is 56mm O. D. Everyone talks about the length or width of the bracket but I need information about the diameter. From the dimensions on Amazon it doesn’t seem like it will work. Will someone with knowledge about this please help? Thanks.
@Roboprogs Жыл бұрын
Quite so. Is there an adapter/spacer for 1 piece crank size brackets?
@johndonzell26403 жыл бұрын
Good stuff. Can you use the 100mm motor with a 73 mm bottom bracket?
@JohnnyNerdOut3 жыл бұрын
Yes with spacers
@stvsmith1791 Жыл бұрын
Oh this is soooo going to the editing app😂
@Hgw982 жыл бұрын
Hi what kit would you recommend I get for a voodoo zobop please I have the non electric version, thanks
@dieterbromkamp55133 жыл бұрын
Good stuff. Love this channel. Any thoughts on building a fat tire e bike for backwoods/hunting?
@JohnnyNerdOut3 жыл бұрын
Find a good donor bike that is made of good quality components and get the BBSHD 120mm!
@dieterbromkamp55133 жыл бұрын
@@JohnnyNerdOut Thank you Sir. Donor bikes..... trek, cannodale,giant???
@JohnnyNerdOut3 жыл бұрын
@@dieterbromkamp5513 All great choices. specialized as well
@TheSpirituallyRooted2 жыл бұрын
What if you have a mid bottom bracket instead of euro?
@dougkresl75383 жыл бұрын
Any tips for measuring battery size? I have a small framed Specialized Hardrock hardtail that I would love to convert, but it has a small front triangle. Luna has a small triangle 52v battery that may fit. How much leeway should you allow. I'm assuming I would need to use a frame bag.
@JohnnyNerdOut3 жыл бұрын
About an inch on every side🤷 to allow a bag to be mounted. Possibly less than an inch
@DJn0m3r2 жыл бұрын
I'm planning to buy a mid-drive too and I have a 73mm. not sure if I should get a 100mm or 68mm. if I get a 68mm is that better so I don't have to use a spacer
@JohnnyNerdOut2 жыл бұрын
I’d go 68mm and get the 5mm motor spacer and a few 2.5mm spacers. Located on my “adapters” page in my shop👍
@DJn0m3r2 жыл бұрын
@@JohnnyNerdOut do have a video putting spacers :)
@JohnnyNerdOut2 жыл бұрын
@@DJn0m3r a couple of my vids. One is the Bafang install video. The other is the fat bike install hack 👍
@irishrover633 жыл бұрын
Mine was a Truvativ 68mm, I bought a new one then decided to go mid drive instead of hub drive. Another question. I'm on my second battery charge and got 87 miles of use from it, obviously not running constant, but helping me on some big hill climbs. The Bafang display shows 3 bars on the battery, but I was getting motor drop out during the climb. It happened several times. Is this due to low battery voltage as when I got home and checked the battery voltage it was 43V? I don't think the Bafang battery display is very accurate.
@JohnnyNerdOut3 жыл бұрын
It is not accurate at all. Get a display that shows voltage and you’ll be good!
@irishrover633 жыл бұрын
Maybe you could do a video to show us how you wire that up. :)
@JohnnyNerdOut3 жыл бұрын
@@irishrover63 no wiring needed. It’s just a Juliet connector. Unplug old one and plug in new one, bingo bango! Get a 500c for a cheap great upgrade 👍
@irishrover633 жыл бұрын
Silly me, I thought you meant seperate voltage display. Lol. 🤣
@JohnnyNerdOut3 жыл бұрын
@@irishrover63 I know people who do that too. True data nerds🧐🤓