Created by InShot:inshotapp.com/... 2019 harley roadglide exhaust baffle configuration. I chang and try different baffle set up to get best harley sound I can. The loud one you like is how it sound right now in person. life pranks
Пікірлер: 16
@palerider8992 Жыл бұрын
Great video thanks for sharing just proves that the time and effort is worth it, I plan to do the same to my V & H's this weekend.
@jamiemitchell228711 ай бұрын
Gr8 vid!! For those who are bad and those who are wimpy, wimpy, wimpy and those who are Hefty, hefty, hefty
@michaelssword53292 жыл бұрын
Thanks... Excellent experiment...
@lifepranks2 жыл бұрын
Thanks I switched over to exhaust header wrap worked really well go to all the store and get like 50' soak it in water wrap the baffle tight. Use metal strap it comes with to tighten
@michaelssword53292 жыл бұрын
@@lifepranksI'm thinking you didn't use Any packing or tin tape, correct? I have to try something, bike sounds like a honda. Your vids were the only ones I found experimenting with the sound. I Appreciate All the work you put into it, cause it will save me from my neighbors hating me, kinda likem. Hey, THANKS AGAIN @ Life Pranks
@lifepranks2 жыл бұрын
Yes.. and then I put the packing back on and then I wrapped it tight with the tin tape. You almost need the packing it takes away the tinging sound makes it more of a deep rumble
@michaelssword53292 жыл бұрын
@@lifepranks Thanks again.
@jamespace6639 Жыл бұрын
@lifepranks, so in the end you used header wrap, with fiberglass and tin tape?
@jamiemitchell228711 ай бұрын
Definitely at 12:50 1)Aluminum Tape-1X, 2X, 3X? 2)Thin fiber 3)Tape 1X in 3 places 4)Rock On!!! OR Tape just in the inner 2/3!!! More rad w/low idle and angry rev!!!!
@KVMerry2 ай бұрын
That fibrrglass we have gloves
@cjoy45253 жыл бұрын
I have never seen someone try plugging an exhaust with no crossover and be baffled at the inability to cease blowout! LMAOff!! But good test!
@jamiemitchell228711 ай бұрын
Rev it!!!!!!!!!
@jj.14123 жыл бұрын
Thanks for sharing! Just to confirm, it's the set up at 13:50 that you went with? Also how did you end up binding the Fiberglass, did you use the aluminum tape or wire?
@Crowbar3812 жыл бұрын
This made me wonder what happens if both exhausts are blocked off completely with screw on steel caps, then start it
@lifepranks3 жыл бұрын
TCMT Megaphone Slip On Mufflers Exhaust. Is what I used from Amazon
@choo22choo Жыл бұрын
Plugging 1 side is not a good idea, to get the true sound of the bike do the same thing to both don't plug 1 side wow