How to modify your dodge 47re/47rh/46re/46rh valve body for 2nd gear lockup! Cheap and a MUST DO mod

  Рет қаралды 3,614

HHK

HHK

Күн бұрын

Пікірлер: 12
@kermit1642
@kermit1642 Жыл бұрын
I'd like to see a vid on how to shift and lockup do and don't. Thx!
@Hazardous-Hotrod-Knowledge
@Hazardous-Hotrod-Knowledge Жыл бұрын
I’ve gotta fix me 6.7 12v truck (blew the charge pipe off lol) and as soon as that’s working good I’ll get a bunch of clips of driving it with the MVB!
@elroyelblander6277
@elroyelblander6277 Жыл бұрын
👍👍right on feller.. thanks for another video..see you next time...have a good weekend 👊🍻
@Hazardous-Hotrod-Knowledge
@Hazardous-Hotrod-Knowledge Жыл бұрын
Thanks, you too!
@jeremyburak6184
@jeremyburak6184 9 ай бұрын
To increase line pressure I thought it was counter clockwise rotation/threading out of valve body? Not further in? Isn't it? I'm not positive but going in would lessen line pressure I'd think. Appreciate u taking the time for the vid either way
@eternalbeing3339
@eternalbeing3339 Жыл бұрын
Thanks for showing the mod. You're videos are helpful. Not sure what the purpose of 2nd gear lockup is? Is this mod only for a transgo shift kit? I cannot do it to my stock valve body?
@Hazardous-Hotrod-Knowledge
@Hazardous-Hotrod-Knowledge Жыл бұрын
Glad you like the videos! 2nd gear lockup allows for the torque converter to be locked in second, the usefulness of this is if you’re low speed pulling a heavy load you can hit lockup and it will help pull down your rpm and stop excess converter slip. For going fast it allows for locked shifts which is rapid fire, and no converter slippage for the maximum power to get to the wheels The trans also runs cooler locked up as well And yup it can be done to stock valvebody!
@zacharysrcgalore9100
@zacharysrcgalore9100 9 ай бұрын
Will this make it lockup by its self like overdrive? Or will I have to hit a switch? Hopefully this will allow me to manually move the shifter into 2nd gear and hit a switch for lock up as I am mostly using this for towing and don’t want it always locking up. Thanks Zachary.
@Hazardous-Hotrod-Knowledge
@Hazardous-Hotrod-Knowledge 9 ай бұрын
Y’know… I’m not actually sure of that. It should be manual engagement only, I don’t think with 2nd the PCM will have a parameter that fits for commanding lockup and the low speed (it looks at TPS and output speed mainly). You will be able to put into manual 2nd and hit lockup on the switch though, it’s awesome for towing!
@joshuaducworth210
@joshuaducworth210 8 ай бұрын
Great video thanks!
@blakewalbrink9980
@blakewalbrink9980 6 ай бұрын
Will this work for the 47RE as well?
@Hazardous-Hotrod-Knowledge
@Hazardous-Hotrod-Knowledge Ай бұрын
Yup!
48RE Valve body tear down, Shift Kit, and what to look for video 2-2
13:05
Precision Transmission
Рет қаралды 34 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
47rh transmission valvebody removal
8:41
Wesley Truax
Рет қаралды 4,9 М.
Did I Waste $4000 on a DIY Transmission Rebuild (47RE)?
38:24
Project Farm
Рет қаралды 1,5 МЛН
Dodge RAM Second Gear Slipping // Before youTRADE it in, Watch This!
8:54
Reignited - Cycle and Automotive
Рет қаралды 109 М.
4L60E: 1-2 Shift Valve + 1-2 Shift Solenoid (Part 1) Basic Operation
13:05
Southpaw Autoworks
Рет қаралды 196 М.
How & When to use Lock Up on your 47/48re!
17:58
Loganbuilt
Рет қаралды 9 М.
46RE Common Problems
22:28
Gary Ferraro
Рет қаралды 68 М.