How to Motorcycle detail and ceramic coated

Products Used.
Iron Out - customspraymods...
Finesse-Iron-Out-1L/p/95257129/category=25713028
Citrus Power - customspraymods...
Wheel Woolies -
customspraymods...
Snow Foam customspraymods...
Glide Clay Lube - customspraymods...
Clay Bar -
customspraymods...
Spritz Plastic cleaner -
customspraymods...
CSM Moto COat
customspraymods...
Aqua Coat Spray Wax -
customspraymods...
Wash Mitt -
customspraymods...
How to detail clean a motorcycle, this is a sports bike. It would be a very similar process on a chopper.
Check it out.

[@angeloflores8189]

after cleaning the bike it will rain 😂✌️

[@constantine4365]

It happens🤣👍

[@akmalhakim3461]

Happen verytime when im wash my bike. Sometimes im lucky when still not finish washing and it already rain.

[@salimadnan2777]

No paint correction 🙄.

[@TaufikAngga-xk6ej]

Try in south east. you lucky if it rains thay day.....

[@DJKOSTAS1000]

🤣🤣🤣🤣

[@rosielynisayas4474]

last step: Here comes the rain

[@HalfdeadRider]

It's protected from rain now (it will just run off), and as he said, after ceramic coating it, don't take it out on wet days for about a week, many bikers never go out unless it's dry, I'm not a fair weather rider myself.

[@959pilot4]

Everyone's saying clean a dirty bike next time. You don't wait til the bike is noticeably dirty to clean it. I mean, do you only shower when your clearly physically filthy?

[@customspraymods]

675 pilot I know hey.. the bike looked dirty to me.

[@bikingwithgrantygrant779]

I clean mine at least once a week in summer and 2-3 during winter due to salt on the roads

[@HalfdeadRider]

@Raiyus13 They kind of do, rust and corrosion, cleaning helps prevent that together with my favourite rust/corrosion remover/inhibitor ACF-50.

[@brianrice6585]

I ride mine everyday. I don't to do this shit everyday!

[@wilmdrdo1228]

It is not a person.

[@FIFTYmil]

Next up: How to clean the lens on your camera

[@bro_street]

You mean how to clean your screen?

[@soujrnr]

That was an excellent video! I love riding my bike when it's super clean and detailed and this will help me get it looking super!! Thanks.

[@tried12usernames]

Probably mentioned already, but stuffing the muffler with the dirty rags and getting them wet is definitely not gonna prevent water getting in. Quite the contrary, they'll just get wet and drip water directly into the exhaust. Maybe plug them with something less permeable.

[@xtina818]

All you haters this is how to detail a bike. Not just wash it. No one said you had to do it like this. For ceramic coating to adhere you must clean the paint to this level.

[@ur2slob724]

Good job but! Didn’t clean the chain and sprockets Also no grit guard

[@neilbranney5014]

I won't be buying all that stuff just to clean my bike.

[@bikingwithgrantygrant779]

Realistically you shouldn't use a pressure washer as it can ram dirt into bearings that are not normally exposed to water at high pressure and wash grease out. I wouldn't use a pressure washer on mine. Sponge method I think is better as you get close to your bike and are more likely to see if parts such as break pads are being worn down or any other serviceable parts need looking at.

[@JamieS1992]

use a light pressure mine has 4 modes use the lightest for the bike

[@martingallagher7217]

Ceramic coating will not adhere to contaminated paint so every stage is important if the durability of the product is to last. This is detailing as opposed to washing which is insufficient for those bonded contaminants to be removed otherwise. The less you touch the paint the fewer swirls, which would be more evident once a wax or especially ceramic was used. Swirls on older bike can be reduced, filled or removed with the correct compound or techniques. Safer by hand, I use a 1" pad on a Rotary machine polisher. Nice tutorial plus result, thanks for your help from #customspraymods.

[@Specter1031]

I stupidly pressed real hard with a microfiber, using my nail which I turned long way, and created a couple long scratches along the headlight. I was losing light fast and wanted the big residue gone. Couldn't clay or use a paint cleaner. I know you never press hard with anything, even the plushest microfiber, but I was stubborn. I haven't tested if they disappear when wet, but I'm still sure they are clear coat only. Any suggestions on how to correct without compounding? They are very faint and need to be real close to see. Perhaps a good filler? Or maybe a wax would safffice.

[@dman117zx6]

Yeah that rag definitely let water drip down the exhaust. Fmf has some really good rubber plugs for exhausts

[@K3470N_]

This is coming from experience, do not use iron removers or strong degreasers on your bike in general. It eats at uncoated paint and can possibly stain it, dries out rubber hoses, penetrates rubber seals holding grease, and bad for brakes. Soap and elbow grease is safer take your time hitting the spot, don’t be lazy by making chemicals do it for you.

[@MrRcarney2010]

elbow grease is worse for the paint it damages it know your products don't use the acidic or alkaline ones a lot of companies now do very good ph balanced products that wont damage the bare metallic parts and rubbers etc use with respect and no issues

[@ssing7113]

You can’t wash out embedded iron particles. Under a microscope they are jagged and embed in A motorcycle is not far different from car detailing Iron removers are fine periodically. As it’s kinda necessary in the detailing world as nothing will remove them What everyone should do is a proper decontamination wash. Polish. Then coating the bike as most every surface can be coated. Then maintenance washes

[@jimslife2323]

Wow!!! The blue paint on that bike really stands out! Thanks for the tip man.

[@Surpriseify]

Mother of god, guys! Water + soap and a soft ish brush + a cloth Finish with putting abit of WD40 on a cloth, and wiping metal parts (not brakes) you are good to go! Repeat every few weeks to have a bike looking new. Once every few months give your paint a polish.

[@joshmcaloon6998]

HappyOwl no brush!

[@Surpriseify]

@@joshmcaloon6998 I mean... Yes brush. No to dirty hard brush! You will never be able to get gunk off a bike without some form of brush or spunge... I prefer brushes as they dont tend to hold onto the dirt particles, anything thats made of cloth will hang on to dirt much better, thus rubbing it all over your bike.

[@lukewalker5111]

You have zero idea how to treat paint sir.

[@joshmcaloon6998]

HappyOwl what are u smoking lol

[@lukewalker5111]

Show me any reputable detailer that uses wd40..... any detailer at all actually. You're the one on the mushrooms buddy.

[@ossetin_official2013]

Am i the only one, who hates to powerwash his bike? 🤔

[@williamt1083]

He isn't powerwashing, though.

[@ossetin_official2013]

William T Well.. spraying or powerwashing.. I only wipe mine.

[@squidlet6125]

Well as he said in the vid. he sprays because if you wipe first you might scrach the paint with the dirt on the bike

[@ossetin_official2013]

Haduken you can spray it and wipe it with wet towel 😎

[@kagenholmes6238]

@@ossetin_official2013 if you dont spray it off your scratching the paint....... I ALWAYS power was/ spray foam then hand wash the detail then wax

[@customspraymods]

Probably about 2 hrs

[@NotAnotherWriter]

every motorbike cleaning video i see, the people always start with a clean bike -.-

[@zaynabidin3331]

Mentioned nothing regarding chain cleaning?

[@diannecrawford9996]

It's not rocket science. Use wd40 then regrease it or use chain oil🤦‍♀️

[@mariemeow9757]

@@diannecrawford9996 wow ever thought about the fact that some people are knew and don’t know everything from the beginning? Why so salty? Could’ve said it in a friendlier way.

[@skonyc3164]

Just a little tip. When using the iron out on the tires it will make them look brown after time so I would avoid using it on the tires. Nice bike 👍.

[@MariahNicoleDaSinger]

What can we use to avoid the brown tires from appearing if we want our tires to look good black shiny and to perfection

[@skonyc3164]

@@MariahNicoleDaSinger In the KZbin search, search why do tires turn brown? Explained in 5 minutes! He gives a great explanation on why and how to treat it. It's a guy showing a Tesla wheel. Hope that will answer your questionsm

[@mbtfp]

..and while he is still putting chemicals on his bike, I´m out riding mine. cheers

[@ironlife783]

Ill just keep saving couple hundred bucks and 2 hours time ,and wash it dry it and use detailer and ride on.

[@zelo533]

iron life 35$ for ceramic coating juice

[@shubinzhang2126]

Don't need get some oil on the chain？

[@customspraymods]

Jordan Z I ride dirt bikes. The chain is under extreme pressure and gets worked hard. I tested 2 new chains with my mates bike and mine. Riding the same terrain and distance. One oiled before every ride, the other never oiled. The chain and sprockets both ended up wearing the same.

[@andrekhoury6252]

will mever clean a bike like that wastebof time just rideee

[@HalfdeadRider]

Your poor bike and wallet for replacing/repairing all those rusty parts

[@carter240]

What a terrible mind set lol

[@dustinmarshall5741]

YOUVE LOST YOUR FUCKING MIND. AHHHHHhahhaha. I would combine that many methods perioodd!! This is great for showroom floor new year models. In reality bro, we real rides have a much quicker and simpler way loll.

[@RaviKumar-uy8ss]

About 70% of population of a country haven't take bath like this bike. Oh My God this bike is so lucky. I think even during marry a bridegroom doesn't take enough cosmetics those the bike taken.😜

[@guinn2415]

Omg , my busted knuckles need a wheel woolie !!!

[@rgone3644]

American washerman.

[@heckler3119]

Next time, clean a dirty bike :)

[@iBossBowser]

Want to wash your bike? That’ll be 200+ dollars in materials lmfao

[@David.Horne72]

I am not a expert, but when you hit the anchors pulling up in the beginning the front forks pogo up and down. I think the preload could be a little soft

[@moto__shark]

I'm paranoid about getting the bike wet. Not a fan of it.

[@muhammadhakimudin9790]

First you must have paddock. This is exactly a lazy wash

[@siclmn]

I ride a lot. I have gotten my bike this clean at times but it always get dirty again, that is just how it is. It is more fun to just ride all the time and not obsess about keeping it clean. All of these products that are manufactured for detailing are not as magical as they would have you believe. Dirt sticks to anything.

[@critstixdarkspear5375]

This method is nice and thorough but incorrect for a BMW. For a BMW the correct cleaning method is open the fuel tank. Stuff a rag in and light it. Then go out and buy a real bike. 🤨

[@CursedBob]

how the fuck are you not gonna get your bike wet within a week? just leaving it in the shed is insanity man...

[@lahirukudaligamage13]

Why not just ride into a car wash duhhh. This is too much 😩🔫

[@cbecks2051]

Because its for cars DuHHuHhUuHhUhH

[@djhinormas959]

u should of cleaned a dirty bike!

[@madeleinegillett5892]

Rick Simpson that's a stock coloured s1000rr tho

[@realENGY]

,,,,,,,,,,,,,,,,,,,

[@unclejohn5012]

It was dirty...

[@HalfdeadRider]

@@unclejohn5012 I think he watched it in 144p lol

[@gorterdetailing7444]

Nice video and bike, good content.

[@humanbeingpeaceandlove3850]

You don't have to wax and use applications everytime but at least rinse and dry the bike after every ride. The wax will still be there.

[@jodywaltham2678]

12 hours and that's all the crud you had? Try living in the uk.

[@Just_andy588]

Is there a link on where you can buy the products

[@1984-f7q]

you are supposed to rise off the bike after foaming it, not rub in the dirt with the mitt. fail

[@binstrap7612]

Hi can you tell me how to clean the bike after ceramic coating?

[@MrSprocket2u]

cork the pipes is a better way too go ,,,, water will still get in with a wet cloth

[@philipjohnshire]

Nice Vid! i personally prefer to use 2 bucket method by : dip into soap > onto vehicle > then into plain water to get dirt off , wring it out, before going back into soapy bucket to keep that bucket perfectly clean!

[@jamesmills2896]

Holy crap, way to make a bike bath difficult. Rinse wash dry, that easy

[@MariahNicoleDaSinger]

Thank you so much, definitely going to stock up on all of these products asap

[@Kalambo898]

too many steps

[@jimslife2323]

Gary There is no too many steps if u REALLY love your bike. 😊😊😊 Spend more time on yours man. Worth it.

[@jasonryan521]

Jim's Life Touche

[@Ove_Bjerknes]

What i learned? How to clean a almost clean bike...

[@a1pestservice]

If I done this on my bike , I would not want to take it out. Ride your bike and enjoy. OTT

[@zappa916]

a bit of BS. two bucket method and power wash. thats all.

[@diamondheat9]

Zappa thinking of getting the coating on a new bike then just simple two bucket it

[@rlui0514]

Awesome videos! Please do a video on hazy headlights fix by sanding it down and spply clear coat ☺

[@customspraymods]

rlui0514 I did. kzbin.info/www/bejne/fYfPfmaZdrule80

[@rlui0514]

Only one pass with 800 grit? How come you didnt do different levels like your gtr lip and work up to 800? Is that not neccesary with headlights?

[@stevehangen2905]

I use Maxima SC1 on my bikes. Even on older bikes it'll make them shine. Dosent stay leave a wet residue

[@Nomad-Drifter]

My V-strom after a wash is like his pre wash...

[@hackerkiller8121]

Do you sell bike

[@kherviemagaway3238]

cleaning a bike is something curse.it will rain after.

[@shahriarfardin777]

You've use so much stuff that I can buy a motorcycle with that money 😏 But loved the video 🇧🇩

[@cbecks2051]

The stuff he used only comes to £50😂

[@sergiukawa]

just fucking wash and dry the bike.

[@8kilosunderyep877]

All this bottles just to wash a bike?

[@Himura]

It is safe to use iron x on plastic abs plastic fairings?

[@reflectonauto]

No, its not. It may cause discoloration.

[@acemangion]

Would you do anything different on a matt/satin paint finish?

[@ur2slob724]

Ace Man yes use a specific matte sealant/ceramic coat and a specific car wash soap

[@1Corinthians151to4]

No one has this time. Powerwash, and done

[@robbiehall80]

Just what I’ve been looking for. Thanks for the video

[@kneedrags7037]

I only need water soap and a clean cloth to clean and dry my bike .. this video is for those who are rich

[@HalfdeadRider]

I use snow foam and use it as a shampoo also after the initial soaking, I protect bare metal with ACF-50. You can get a load of snow foam really cheap, I got some two years ago and still have plenty left. ACF-50 seems expensive, but if used with a micro fibre cloth, it lasts well, you only really need to apply before and after winter but I do it after each clean to be sure.

[@joshmcaloon6998]

Just people who care

[@Specter1031]

So is the bike in your profile pic.

[@adampug206gti]

What confuses me is when he dryed the bike off with his vacuum blower he then went over it with a microfiber cloth.. 😂 dude that is not the way I use these blowers on my 2 Superbikes and my work vans and car.. And trust me you're just asking to maximize getting more scratches the whole point in using a blower it's to dry it off perfectly without touching the bike or car.. Ect.. You made that look a lot more work than what it actually is I don't think some of your steps were correct I'm afraid but good try.

[@HalfdeadRider]

A microfiber cloth is not going to scratch anything, unless you use a dirty one lol That is just buffing it up to remove any possible streaks and marks.

[@cbecks2051]

Wrong a blower is used to get water out of gaps and holes ect so once you put a wax on water wont go onto it. Stop talking like you are a detailer😂 you work in mcdonalds and live in a 1 bedroom apartment😂

[@prashvineshello4016]

Very nice byk

[@naveents1732]

The bike is already clean and yu r involving so many methods. Plus yu r in formal wear to wash a bike. Washing mainly includes sprocket cleaning which yu missed. Plus so many tools and chemicals wud add cost. Rather than using all these yu can take this to bike wash garage outside which involves lot less money and time

[@frankiecalsone8536]

ВОДА -СТАРОЕ ПОЛОТЕНЦЕ-ОСТАТКИ ОТ ГЕЛЯ ДЛЯ ДУША И ОН ЧИСТ!!

[@scottthompson7009]

Where do you get your detailing tools?

[@customspraymods]

Scott Thompson vg-auto-paints.myshopify.com/

[@wolfe1970]

Im curious, if ceramic is so good, why do you have to go to such lengths to wash your bike....

[@customspraymods]

Once it’s on there it will make washing easier.

[@CajunGreenMan]

Did he cover cleaning the windscreen, or did I miss it?

[@stevewill3572]

This all seems overkill to me, one ride and it's back to dirt. I just degrease the metal parts, then spray the foam and call it a day

[@dillontheotter1212]

I've got to say this, with the microfiber towels RIP off the Tag, it will prevent scratching, dont wear rings, jewelry, belts or Jean's or button down shirts, clothing like sweatpants and a t shirt are best

[@russelldewitt6742]

Very thorough vid. Thanks! What are your thoughts on doing a polish before the ceramic coating?

[@customspraymods]

If the paint needs correcting yes. 👍

[@arimariana2513986]

how much cost the service?

[@customspraymods]

Ari Ramos free DIY

[@shinykingscalifornia831]

You`re into Harley Davidson or other motorcycles? Check out the new waterless strach-free motorcycle cleaner for all surfaces with ultra shine.

[@راشدالحمادي-ض5س]

What the faking you doing!!!

[@rubensanchezgonzalez4866]

How to clean a clean bike...

[@claireb8542]

Why would you use the iron fallout remover before you have cleaned the bike? It makes no sense as the iron fallout remover will work better on a bike which has been washed. You will have been better off using the fallout remover before using the clay bar, which you should have used the clay bar on all of the paintwork not just on a little area.

[@ricergarage3092]

So I've never detailed or washed a bike. I'm kinda worried about the the engine and seat, im assuming they can handle some water but I don't wanna damage or have the seat completely soaked. Can I get some tips?? Also, can I used a pressure washer so should I use a spay nozzle on a garden hose?? Thanks.

[@user-hs2hd7wp9g]

That’s great for people who ride once a year, if you use your bike often that’s just a waste of time/money.

[@thongvo2081]

How about the name of liquid cleaner

[@karlosantiago5902]

How does cermatic coatic work with matte paints?

[@adrianponce3489]

Karlo Santiago you would have to get a matte specific ceramic coating

[@karlosantiago5902]

@@adrianponce3489 thanks for the info dude :)

[@PARANOIDMLBB]

wish i had a bike to clean

[@jeremyjohn8199]

How often should one do this? I’m concerned about the repeated use of cleaning product on the motorcycle.

[@customspraymods]

Jeremy John all these products can be used many times. But after doing this it's going to be easier to clean your bike. So all the chemicals may not be needed in the future

[@jeremyjohn8199]

customspraymods oh alright thanks :)

[@camhaywood9948]

shove a microfibre in the front part of the s1000's because its just a straight hole to the filters that get soaked

[@hackerkiller8121]

I want one man

[@Apokolohypnotis]

Good job, but I always thought about detailing as having a "critical condition" bike, with slime, dirt, chipped and scratched paint, oxidized wheels and radiator, whitened black plastics (from standing in the sun), hard rubber, mate and yellow windshield and headlight AND THAN make it look like this.

[@EyeForKnowledge.]

Most surprising thing about this video? He rode for 12 hours on a BMW and it didn’t break down.

[@Yellow-cs1hn]

What's the title of this song

[@afletra]

wow that beemer is indeed shiny

[@perfumetheory]

Too much cleaning

[@mightysachi]

Great stuff

[@user-yx5rr1vo2o]

Niiice

[@phonyungman9600]

Whats the name of the song ?

[@church19able]

Can you do a video on how to do aluminium wheels?

[@church19able]

I mean spray aluminium wheels.

[@Specter1031]

So genius me was running out of sunlight and there was bug residue on the front of my bike. I didn't have enough light left to Clay so I just decided let me press my nail into the microfiber and then up scratching my paint. I know never apply Force the microfiber but some people just don't learn 😫

[@santosboss]

Iron remover for all moto?

[@CHIBA280CRV]

Sweet bikes