I was changing out my cooling fan today to spite the stealership's $2200 quote. With a $300 fan I ordered, I found that I did not have to remove any major coolant hoses (2012 S550 with the twin turbo stuff in the way) by removing bolts and pulling the framework forward slightly. I slid the original fan out in 15 minutes, another 15 minutes to replace it and I was done. Worked perfectly. Then to my horror, I could not open the hood after a successful test run. I found your video and had the hood opening in about an hour. Many thanks, I thought I was screwed.
@amglady2 жыл бұрын
I want to THANK YOU for this video! My husband's hood would not open after he removed the fan shroud to make a repair. He had no idea why it would not open. He had the exact same issue as you did. Thank you!
@davidciontos90823 жыл бұрын
you just saved my life sir. you are a good man
@pridebx3 жыл бұрын
Thank you so much I couldn’t see the release but I poked around in the area you pointed out and it released the hood thanks again
@shooterpro93122 жыл бұрын
Yo
@bennyblanko3 Жыл бұрын
Thank you so much! This is much easier than going with a long screwdriver from the bottom. Especially the driver side.
@qballer2405Ай бұрын
Great video. After a radiator swap and put everything back together and all of a sudden the passenger side lock will not unlock the hood so now I have to take the tire off and the plastic on the passenger front wheel and try this method thanks.
@Yami2Hero3 жыл бұрын
😂 this is my car he’s working on .. that’s wild how I found this video and I am looking for his help again
@pw1715Ай бұрын
worked great for me, thank you very much!
@SeanPGribbons2 жыл бұрын
Wow thank you. I just replaced the alternator on my 2011 and about crapped myself when I realized the hood wouldn’t open back up. 5 mins later wheel well cover off I yanked hard on it and popped open.
@CarlosMartinez1004 Жыл бұрын
i am in the process of crapping my self! my alternator is replaced but the hood won’t open. will give it a shot
@Mrprestige20113 жыл бұрын
Thank you sooooo much worked like a charm.👍🏾👏🏾👏🏾👏🏾
@BLKO_Auto Жыл бұрын
Great vid, helped out a lot!
@accidentssceneinarizona89732 жыл бұрын
You can also use the long flat screw driver. Slightly pull the hood up. Push the flat screw driver agains the latches release switch
@donmailo3 жыл бұрын
Very very helpful. Thank you. The video was very good explain. I had the same problem
@johnlockesghost5592 Жыл бұрын
Videos like this redeem youtubes pitiful existence. Well done!
@boguckitomasz9725 Жыл бұрын
It’s working 👍 Thank you
@youngsick60914 жыл бұрын
Just fixed mine 👍👍👍👍👍 Thanks for sharing it helped out a great deal
@ThompsonAutoTest4 жыл бұрын
Glad to hear that
@youngsick60914 жыл бұрын
Would you happen to have a video on how to do the engine mounts?
Thank you for the valuable info. I have a 2003 e55. The plastic red handle, under the dash, cracked, and will not actuate the s/steel cable swage fitting. (The plastic broke). Why not make using cast aluminum? What if yer in a long journey somewhere, and car needs coolant, and plastic cracks. At this point, yer in trouble.
@bennyblanko3 Жыл бұрын
Pliers and just pull works in a pinch. Some plastic is stronger than aluminum. but, the design is a little crappy. They should put a couple little steel bars on the other side of the plastic handle, to strengthen where the cable attaches.
@tightgame97693 жыл бұрын
I seen the two cables you referenced, however, the cabling that goes into the driver side latch came out when I pulled it. How do you get around this hurdle?
@patrickmcqueen60662 жыл бұрын
So if you try to do the passager side and it don't release then what would be the next option? Need help!
@blackstonechariot Жыл бұрын
Thank you Sir 👍
@brandonjackson39284 жыл бұрын
Perfect video for my situation
@KwispyKweef2 жыл бұрын
this is helping me out at my job, replaced a radiator and I guess the cable came loose on reinstall 😂
@Livevicariouslythroughmemusic Жыл бұрын
Wonder if this works with a gl450
@yunbow5630 Жыл бұрын
thanks
@asenmilenkov46383 жыл бұрын
Bro Thank you so much....
@brandonjackson39284 жыл бұрын
How much was the front on I need a new one for 2007 S550
@Usmanthemecano2 жыл бұрын
Direct shot??
@brandonjackson39284 жыл бұрын
Where is the cable housing and assembly for the left side
@khinmyomaung63487 ай бұрын
tell what year no body tell all of your you tuber fs
@dreamkiller1899 ай бұрын
Does anyone have the same issue but for cls550, there is 0 information of this issue online for my case