How to Paint a Faux Leather Barstool | Remove Sticky or Tacky Feeling

Рет қаралды 63,278

Күн бұрын

Пікірлер: 38

@dawncannon7074 4 жыл бұрын

That was a great redo! Thank you so much for the tip on the tacky residue. I was having that problem with a handbag I painted. I am going to do that!! 💚😀💚

@friggahalcyon5912 Ай бұрын

Well this was really helpful. I do not know how to deal with the tacky finish. Thank you so much

@myrtlebeachairbrush 4 жыл бұрын

Just an FYI for the future if you use a vinyl spray clear coat you can avoid tackiness all together most clear coat are not made for vinyl and normally do not bind which is why you end up with that takanot it's just easier to use a vinyl clear coat to avoid the tackiness and it appears a lot better to the vinyl

@AngelusBrand 4 жыл бұрын

The SEM clear coat works really well. You are absolutely right.

@Just1Tori 4 жыл бұрын

Dope clean custom with a heap of tips that are soooo helpful for me on Faux Leather thank you sir!!

@best_shooter_in_the_land5028 4 жыл бұрын

Great custom Mr. Phillips! Can you tell me what music was in the background of the video if not thats fine Thanks for the tips.

@AngelusBrand 4 жыл бұрын

We usually get the music from Epidemic sound. KZbin friendly 👍

@sabrinbyaah6053 Ай бұрын

So, on the Website they wrote the preparer is not for faux leather - what else could I use for preparing my faux leather shoes?

@jacquelynncowart2020 11 ай бұрын

Do I need to buff out the wax with the brush ? Cause I painted some shoes with walk on red angelus paint and it is tacky so I want to make sure I don’t ruin them

@erikiuxs.6355 3 жыл бұрын

Life saver! I was having that problem with a wallet, I'm going to follow the advice. I wonder which airbrush was using 🤔. I want it! Lovely video! Many thanks! 👏❤

@gustavoadame2334 4 жыл бұрын

Angelus paint , can paint anythingggg!

@AngelusBrand 4 жыл бұрын

That's a fact 💯

@MarlenaMarley87 Жыл бұрын

How long in between coats should I let the paint dry? And how long should I leave the final coat on before removing the stencil? Also, what mm needle are you using for this project?

@reedlipps4723 4 жыл бұрын

Nice custom!!!....Angelus is the best👍🏻👌

@AngelusBrand 4 жыл бұрын

Thank you 😍

@samiabul-khoudoud7709 4 жыл бұрын

Thanks for all the videos! Do you have any tips for removing paint from unwanted areas of leather? My guess is something to do with deglazer/acetone but I’ve been struggling while trying to complete the cleaning of my custom.

@dondeestalaleche7652 4 жыл бұрын

just use acetone to get as much off as possible and if there is still a little bit left just use the same color paint to go over it If you wipe within the first 5 seconds the paint won't have time to set

@samiabul-khoudoud7709 4 жыл бұрын

Donde Esta La Leche? Thanks! I’m just struggling with the removal of the paint from tight corners on my custom shoes, I didn’t do as good of a job taping them as I’d hoped

@dondeestalaleche7652 4 жыл бұрын

@@samiabul-khoudoud7709 if you use a toothpick you can usually scratch the paint off

@samiabul-khoudoud7709 4 жыл бұрын

Donde Esta La Leche? Great! Thank you so much.

@AngelusBrand 4 жыл бұрын

You can use whatever you prepped the leather with, whether it was our deglazer or acetone.

@rvdstlrn5001 4 жыл бұрын

Nicely done! And thank you for the tips 👍.

@AngelusBrand 4 жыл бұрын

Glad it was helpful!

@BlakeArtworks 2 жыл бұрын

I am confused, if you need to prep shoes to take the finisher off, why can he add finisher before stencil and painting? Thanks.

@AngelusBrand 2 жыл бұрын

You are taking off the FACTORY finish. Which in most cases is a silicone, or resin. The Finisher that we carry is water based. So this is fine. It is not a heavy product.