How To Paint Any Car Like a PRO, Even if You're a NOOB!

[@garrettdlouhy5531]

A pro is someone that can fix his own mistakes with perfect results. You clearly know what you are doing. Respect

[@andrewdomenitzdmd]

When I was 25 yrs old in 1977 I had to learn to paint by using books available at that time. The paints available were lacquer and enamel. I did a total of 3 cars learning as I went along. I found out the hard way about putting lacquer over enamel without sealing the previous paint or removing it all the way to bare metal. This will come up in your work when you are doing work on cars from the era before the use of clear coats over color. I am not an auto body man now or then either. I just bought cars that were needing bodywork and got them cheap to sell them later. I have seen a lot of auto body videos lately and I have not heard anyone say to put more clear on the front of a car so to be able to buff them out in the future without getting into the color. This makes a difference because if you are going to drive it you will be getting scratched and bugs and chipped areas to fix. If you have a very thin clear coat on the car you will be digging into the color a lot of the time making it a bigger problem than a scratch in the clear coat. Please excuse me if I got any of the words wrong relating to the old type of paints

[@jimsxray]

I, also painted a few cars in the 70s and it was lacquer and enamel. I'm going to jump back in with the new stuff like base and clear coats. I got my glossy shine back in those days with a lot of wet sanding, polishing and buffing.

[@MJM2014S]

Thumbed up after watching the part where you left in the mistake and how to fix it. That's excellent advice for any project

[@HowToPaintYourCar]

Thanks Michael!

[@NewYorkCityBoxing]

He could've edited his mistake, but he didn't. His honesty and willingness to teach is much appreciated.

[@vermontjeff2535]

I stopped watching other auto body videos and I'll only watch yours. You explain everything and don't skip steps in the video. Your work is awesome. Thanks Jeff

[@brianowens2943]

Excellent job you show that even the pros make mistakes with the bondo sometimes and how to remedy it you have a natural talent and great passion

[@Matt-vz5wy]

I’m doing a paint job on my car. Nobody else works on that car, I do everything on it from engine rebuilding to now paint work. I really enjoyed this video, it addressed a lot of my questions and I appreciate that you don’t ignore the teachable moments when you make mistakes. I’ll be looking for your videos first from here on out when I have auto body questions. Keep up the good work.

[@HowToPaintYourCar]

Hey Matt, grab your free manual if you still haven't: learnautobodyandpaint.com/free-autobody-manual

[@LilMissBlogALot]

I came across your videos while trying to research what possibilities are out there for a pretty bad paint job on a Mustang GT I was hoping to buy. (Trim/door handles all painted, nobody taped anything off, orange peel, dry spray, runs etc) Other than redoing the entire thing, there is no way out of it. (and for the price they're asking, it is totally not worth it! Unfortunately.) So, now, I spent the past few hours digging around your KZbin channel and learning how to do some fancy stuff lol. My husband is very impressed with your videos (not that that means anything but, lol, he is a perfectionist and is irate about this GT and thinks you do flawless work!) I'm a new subscriber! I am a girl, yes, but, this is all so fascinating to me and I think it's great how you make this all seem so easy and are so enthusiastic and positive for newbies!

[@captainh3831]

True professional...very thorough. Always nice to see someone who is knowledgeable about their craft and takes pride in their work.

[@TheSouthpau]

you are an EXCELLENT TEACHER of auto body and painting!!! just joined your community. I have been teaching as a certified master mechanic for gas and diesel students for over 20 yrs. I am just learning auto body work now. You have helped me tremendously with this new skill. now I can paint and do bodywork as a green horn. lol. thank you for all you give back to others as I have tried to do the same with mechanics. Great job once again !!!!!

[@HowToPaintYourCar]

Hey Bobby, I thank you for the awesome feedback. You should start sharing your skill and knowledge on diesel repair here on KZbin, I'm sure many would love that. I have another program that teaches how to make money by sharing your knowledge on here on KZbin. Let me know if interested. Please keep me posted with all of your success my friend!

[@paulshamblin6260]

Yeah that was my thought. Hook up with a vocational school for the Blue Cross 😆

[@joncastleberry70]

I've been doing body work for 25+ years. After watching some of your videos I must say you are skilled sir. Good job helping people wanting to get started.

[@HowToPaintYourCar]

Thank you Jon.

[@gergemall]

I appreciate you showing your mistakes too . Helps me learn . I have a tendency to learn the hard way and I appreciate your honesty, it’s still art to me Tony . I am ENJOYING VIP AND LEARNING TONS . ☺️❤️

[@mrkd283]

Awesome work fella. Going to be painting my 22 year old Toyota most likely next year after the garage gets built this summer. This video is now saved.

[@1969Fox]

I like that you do things realistically. I learned stuff from the one where the guy takes 750 hours to sand a Corvair door, but I'll never spend that much time with a 48" sanding block of 27000 grit sandpaper while standing in a kiddie pool. I like that you rarely get below 400 and use machines for your initial sanding. It gives me hope that I can get this project done.

[@HowToPaintYourCar]

of course you can get that project done!! Check out VIP and see how it can help you with your car projects! www.learnautobodyandpaint.com/vip-offer/ with over 100 hours of training videos, e-read and bonuses! Definitely one of the most comprehensive courses in auto body work and paint!

[@guillermonieri4203]

It is great that you are taking the time to teach us (amateurs) how to do body work & paint our cars. Thank you.

[@craftyukraine]

Even tho, you didn’t paint the car in a professional painting booth, your techniques look so good and so confident. Just like the result.👍🏻 And the video is such a pleasure to watch. After watching this video, I believe, I can do some great paint job.💪🏻

[@craftyukraine]

And, of course, I’ve subscribed to your channel, to watch more videos.😉

[@HowToPaintYourCar]

Excellent man thank you.

[@chubbyninja975]

I don't really know anything about autobody and will probably never paint a car myself, but I like the effort you put in your videos and your honesty especially when it comes to mistakes makes me believe you really know your stuff. Keep teaching the public!

[@HowToPaintYourCar]

Thanks for the awesome comment LevelUPKev!

[@grady.stu.8300]

I'm not even painting my car but you did so well making this video I watched the whole thing. Nice job.

[@danielmescalante3042]

I'm restoring my 64' beetle and I'm almost ready to pain. Your tips make a huge difference! I'm definitely singing up for the VP. Thanks my dude!

[@HowToPaintYourCar]

You will love it my man Samuel! Can't wait to see you inside!

[@cieramist1]

I have to admit that I totally enjoy watching your video's! You're so easy to follow and to listen to as well. You take the time to break everything down and explain so many things to us watchers. Thank you so much for sharing your talent!!! I have never painted a car, but I have painted many walls and furniture items, just for myself....but after watching your video's, I swear...if I had the space and the equipment, I think I could do this!!! :)

[@HowToPaintYourCar]

Yes! you can definitely can! Check out VIP and see how it can help you get started in auto body work and paint: www.learnautobodyandpaint.com/vip-offer/

[@michaelbearse4733]

I love how thorough you are!!! I know what I'm doing but you still give me tips and tricks cause of the years you have behind that gun!! Your seriously talented but you don't need to be told that!!

[@HowToPaintYourCar]

Thanks, Michael for the awesome feedback!

[@rayge87]

I haven't painted in over 20yrs but you've inspired me to take it up again, thx!

[@ricky.23786k]

Your painting car vedeos help, give inspire...thanks for the vedeos! You're one of the best professional vehicle Painters!

[@jhe4982]

hi Tony, here a newbie from Holland. I enjoy, love watching your video's, it helps me alot. I bought a vw golf 3 from 1997 for my daughter and soon when I am confident enough watching more video[s I start the restauration project. thank you

[@jeffwalters1749]

Great video! I’m very new to learning about Auto body and paint, and this is the best video tutorial I’ve seen! You’ve got a great speaking voice, concise, and very professional! It’s going to take me a while and some hard knocks, but I’m going to join the community and one day paint my dream car! Thanks for the video!

[@austinbradley3411]

Wow!! You got talent.im in the process of doing my g35 coupe and your vids make me more confident.thus will be my first time spraying anything with a spraygun.thanks for the great video

[@HowToPaintYourCar]

Check out these awesome Atom Spray guns on Zoolaa now: www.zoolaa.com/.. Don't forget to grab your free manual and start cranking on your own project! learnautobodyandpaint.com/free-autobody-manual

[@jeanetterussell8024]

So I do believe you are the most educational and elementary tutorial I've seen this fair. So my brain was seriously injured and I can no longer work. With the settlement money I want to build a paint booth. Any suggestions on tools and machinery to make my new hobby work well.?

[@janetwilliams337]

My car is currently being sprayed at a auto shop and I wanted to know what would be involved and so your video helped me to become more aware of what to expect and even an idea of the cost based on mixtures and other materials. Thanks for being honest even when things don't go as planned. Let me know what else a customer might need to know when spraying their car. Thanks again.

[@paddyp75]

Tena Koe Tony' Your knowledge and time to give back to people is truly admirable. You've given guys like me who've had to pretty much learn everything on our own through life the hope that there are ways to make something good of yourself with finished projects to be proud of..Thanks a bunch..

[@NoClueH2]

Great vid. Planning on doing some repairs to damaged trunk on my Cherokee and was thinking about doing the body work and prep myself and having a shop do the paint, but watching this vid gives me the confidence to think I'll give it a go myself. Worse case scenario is I screw it up and it looks awful and I take it back to base and give it to a shop. Best case, I learn from guys like you, do a great job and save a bunch of money and get to have pride in a job well done.

[@HowToPaintYourCar]

Thanks. Yes especially if you end up doing more jobs than one... Well worth learning the skill set!

[@gato6100]

Fog the hood on the last base coat to spread the metal flake uniformly and to avoid tiger stripes. Also on the last clear coat on the hood start from the edge to center and center to other edge so that there is less dried out clear. Also when covering primer areas, do a small batch of concentrated base coat 70/30 to cover up the primer areas faster, saves time and material. I would like to learn how to spray a perfect paint job ( no orange peel, no specs of dirt/base/clear, no runs, etc) that requires no buffing. Do you buff your paint jobs? If so why?

[@henrydixon3159]

Great video Tony man Glad you brought up the point about running good information that red color pops keep the videos coming

[@ISLAMguidanceful]

Question: how much would a job like that cost for a Honda accord 2010. what about just for hood side fenders and front bumper. you seem like an honest man hence you left the part where you missed up in the video when you could have clearly edit it out. respect to you sir.

[@jm1551701]

Great Instructional Video, I am not new to auto repair, I was an auto Mech. for 18 years, but I have never painted a car, I am in the middle of restoring a 66 Chevelle and now due to the current economical environment I have decided to paint the car myself and one of my biggest worries was turning my shop into the color that I will be applying to the car but you have shown that will not be the case and you have given me that much more confidence to do this myself, the car is down to bare metal so now my next step will be to start applying filler where it needs, +I will then move onto after all the filler is smoothed out to applying a coat of epoxy primer is this a good idea for the next step? I have to you are very good,

[@kevinhekers2380]

just a tip for those wheel arches en edges just start with those if you do a clear coat then you wont forget them this tric always worked with me

[@tonymessina4305]

my first attempt painting my 08 smart car. you are a fantastic instructor. thanx for being so informative keeping the fingers crossed

[@HowToPaintYourCar]

Tony! Are you VIP? www.learnautobodyandpaint.com/vip-offer/

[@Wipsplash]

Great video, Thanks! I'll tell you the worst, trying to blend silver metallic after replacing the hood and fender with paint that the paint shop wasn't even close on the color match.

[@juniorgos25]

Big up yourself Tony I've watch your videos and now I'm spraying cars thnx to u bro

[@HowToPaintYourCar]

I appreciate that

[@richardbedard1245]

My future may include a Jaguar XJ8 that needs painting. You've got some good info and I want to follow your videos. I would want to prep and paint this car myself.

[@paulsoper744]

I have a 59 Ford. Can you do a project were you have to walk and paint the top of a car. Standing still to paint is the easy part. Walking is the hard part for me.

[@georgias2099]

I had to redo the quarter panel on my car, and all my guy friends kept offering to do it, as they didn't think a girl would do a good job. Thanks to your videos, I proved them wrong! XD

[@techwiz2410]

I have a question... :-) I’m trying to paint a car now but here’s a couple questions of you can please help... I see you painted the car and used the oem paint that was sanded as a surface to spray paint... I didn’t realize you didn’t have to prime the entire car... so if I have an area that I used filler to fill a small dent... Would I prime JUST that area and then anywhere the OEM paint is in ok shape I’d just sand it with 400 and then after cleaning am ready to spray? My next question is very important to me.... I’m sanding with 320... so if I sand the entire car with 320 and then spray a 2K basecoat will I see sand scratches in my finished product or do I NEED to sand with 400 instead. I think the last thing I painted I sanded the OEM basecoat with 320 grit.. then sprayed it with primer.... but what if I skipped the primer if it wasn’t needed due to the paint underneath being in good shape and then sprayed my 2k basecoat over the 320 scratches.. would it show in the final product? Thanks a million!!!

[@frankallen3634]

Powders and pearl are in the intercoat so you still put on 2 coats of clear over so you should be able to color sand

[@joebaranowski8326]

Tony, I'm a LABAP VIP member (awesome value by the way,) and I just want to say - the most valuable thing I get from your instruction & videos is the drive & desire to keep working the project; thanks man. To everyone out there with something in the garage, never give up!

[@HowToPaintYourCar]

Joe thank you for the AWESOME feedback. Keep rocking bud!

[@lilj7072]

Learn Auto Body And Paint DIY Mastery! What guns do you use? N what other gun brands your recommend? I've been looking into the devilbiss/tekna guns

[@GaiaMiranda]

Wow if you had a shop not too far from me I would be loving it to hook up a possible bodykit and spray for my 370z 2009 in monterey blue. Thinking of a NISMO conversion on the front from my base with an amuse rear bumper cover and spoiler. Splitters for front, sides and diffuser for the rear.

[@calvinwong365]

man, i'm just speechless what you doing here. so amazing. i think you said you have people teaching this in canada? care to let me know where? i'm getting into car detailing, been doing it for 5 months now and love it. like to learn this skill as i'm getting to understand compounding and polishing also.

[@Bodycomp101]

Tony your the bomb! Would you ever consider a paid training where the customer flies down to your shop for a hands on week event?

[@HowToPaintYourCar]

Thank you bud. Yes I was thinking of it a few years back and actually put together an offer, it was hard getting the guys to come out on certain dates so I scrapped it. Maybe in the future. :)

[@Bodycomp101]

Cool, thank you

[@abstraddic0442]

That was awesome dude, The result was nothing less than professional. Thanks for sharing.

[@HowToPaintYourCar]

Thank you for watching! kzbin.info/www/bejne/nHzcaoytm7GEbLc&lc=z13icxqhfuesivvqb04ci1yysxyqhb1hgx40k check that one out too!

[@christinaajpw1793]

what compressor do you use for this work in what is the specifications of the compressors requirement

[@HowToPaintYourCar]

I always use at least a 60-gallon to paint a full car. Check out some of my blogs on air compressors here: www.learnautobodyandpaint.com/best-air-compressor-size-for-full-vehicle-painting/ www.learnautobodyandpaint.com/picking-your-air-compressor-for-automotive-painting/ www.learnautobodyandpaint.com/what-size-air-compressor-to-paint-a-car/

[@christinaajpw1793]

​@@HowToPaintYourCar Ok thank you! :D i need that for my father :) Good day!

[@halla1968]

Yo Boss Painter, You are the man. Its Okay to make mistakes. Its how you know how to fix the mstake. Making mistakes makes you a better Painter or Installer. I was trained by various Floor Covering Journeymans. The Best Journeymans that I learned from made Mistakes in thier Career. And thats what made them "Top Journeymans". I thank those guys in my career. As a Journeyman myself now. I continue to use my methods that I use now from what I learned from those guys that already made mistakes (I still make mistakes or forget a step every now and then). But I know what to do and how to fix it. Overall, you are a humble dude. When I am ready. I may purchase your Training to Paint like a Pro.... Peace out...Jeff L.

[@HowToPaintYourCar]

Thank you BOSS! Thank you for the comment. I hope many people read it as it's very true. I say something along those lines all of the time. :) Keep cranking my man!

[@timesthree5757]

To everybody out their just do it. My first time painting was an old beat up pickup. With practice you get better.

[@HowToPaintYourCar]

Agree! and of course proper guidance :)

[@timesthree5757]

@@HowToPaintYourCar Yea I didn't have proper guidance. Trail and error.

[@rawdio.docdar5715]

hi bro im from ontario. canada, just watch 2 of your vids,the one from today and jan 2. awsome stuff really enjoyed, learned alot. im a newbie, been airbrushing for a few years and am intrested in learning more. will tune in for next live show. thanks, take care.

[@mjj3rd]

There is ongoing discussion about how to get paint protection, sealer, ceramic sealer and a wrap. I would like to just do correction then two or three clear coats. Paint in question is 2 years old and 15 years old. Is it feasible? Is there anything special I should do prior to spraying. Thanks, Mel

[@moos209]

You should water down your floor if you arent going to use a paint booth. I think it helps keep dust particles from floating up and getting on your paint.

[@landybob8393]

Man your video was awesome. I hate when people do a how to and just show the finished product. You have a new subscriber. Thank you sir

[@kylegable1273]

Loving the attitude and energy bro,just subscribed

[@HowToPaintYourCar]

Thanks for the sub Man! Get your free training and know How to Paint like a PRO! Check out our VIP Program that covers A-Z step by process on Auto Body and Paint vip.learnautobodyandpaint.com/home

[@jawadqureshijawiz]

Hi Tony, you still update the website? I remember buying access years ago. I should check it out again if you have new stuff.

[@ernestobarron2211]

I want to learn more, just the basic on what to do from start to finish, fixing dents and all that good stuff.

[@HowToPaintYourCar]

Awesome man! You may like this one kzbin.info/www/bejne/nHzcaoytm7GEbLc Also get your free auto body manual here: www.learnautobodyandpaint.com

[@lonnyerb8059]

I like you showing your mistakes because we can learn from them too. Thanks

[@mr.valentino2824]

Crazy question? Have you ever spray painted using color match rattle can paint? Your thoughts please....

[@wesleybartholomees8848]

Hey, I am from Belgium, just started a new body shop for motocycling. love your videos

[@HowToPaintYourCar]

Good luck and thank you for watching. Don't forget to subscribe :D

[@danielmckenzie6858]

Tony I bought your system about 9 years ago painted a few cars, all were good but it been a few years and wonder if I am still a member, and see how to log into it?

[@JonPon400]

Hey Tony been painting front bumper, rear trunk and rear bumper, black car, yes it's been an experience to say the least, I wet sanded with 600 before I'm gonna spray base (is that okay ? I'm spraying Sunday, I noticed even with filler primer a good bit of it I can still see some rough marks, should I glaze putty those sections sand with 400, prime it, then wet sand it and then shoot base? Thanks for what u do man a true artist, I'm actually enjoying doing this as crazy as it sounds and am looking for a job in it...

[@snay1345]

No sanding the base coat before adding clear coat? Do you check it for any imperfections and dust before you put clear coat on?

[@aadsips3521]

Hi Tony .... this is a VERY informative video ... thank you very much for the lesson.

[@killerconsoles517]

Do you have video on the complete process of blending paint? ie from the grit used start to finish on the repair / the blend and the scuff to lacquer the whole panel.

[@HowToPaintYourCar]

yes, check out learnautobodyandpaint.com/free-autobody-manual Get the free book and a special offer for you!

[@Justins00ss]

Was wondering how many coats of base you needed to cover the primer on the hood? Just sprayed my gto and the hood was primered similar to the bmw alobg the front and the red just wouldn't cover. I have heard about red bleeding through. The rest of the car looked great but going to have to redo the hood as theres a shadow showing through

[@HowToPaintYourCar]

I usually do 2 coats of color and 2 coats of clear.

[@alialsaeedi1024]

I have a nice clean hood but I just need to change the color of it to match my car, do I have to sand it down first or can I prime on clear coat then wet sand the primer and paint my color on top? Please answer me 🙏🏼

[@All2Skitzd]

I wanted to ask the first time I watched the green mazda you video but I didn't want to sound like I was just hating but now that you brought it up first. When you was putting the body filler on it looked like some wasn't mixed hot enough on part of it then on the later part of the video it looked good.

[@mrmojorisen6336]

wanna paint my truck, the clear is flaking off. the base color is fading, no rust. can i sand the clear down to the base and repaint or do i have to prime 1st and then paint. im going with single stage low gloss same color, thank you.

[@moisesalou7978]

i like the paint jobs that you do i wana be like you and im 23 years old good looks and i keep learning

[@zanaga1901]

Do you always supposed to sand down entire vehicle if you painting a entire vehicle even if no scratches or imperfections on and use a primer or a primer sealer before basecoat. I bought new basecoat and clearcoat already to paint my vehicle but it will be later this year because plan on moving to Texas my brother lives there.

[@Bmwmaniac001]

Hi Tony, I'm doing the bonnet and new plastic bumper on my 2002 3j6 red Toyota avensis SR. I'm doing it with rattle cans..my bumber is causing me concern as it is raw OEM part. I've read contrasting ways in which to prime the bumper. I'm thinking adhesion promoter 2 coats and 2 coats 2k epoxy primer then 2 coats filler prime then 3 coats base then 2 coats 2k clear...am I right to go with this method or what would you suggest?

[@larrybroad8746]

what do u think i should finish sand it with 5 inch electric sander or do it by hand wet 600 or dry what is the best most effective way????

[@halolime117]

My car is badly sundamaged and red, i was wondering if i should repaint the car of buff it?

[@pagosplace3065]

Could you have used glaze putty instead of Bondo on the small dent?

[@the_real_greywolf]

Can you recommend the tools needed for painting please. Like the gun, the compressor...

[@drewc.i.n.6325]

Great job. I've been watching videos . This was the best I've have seen. I have been looking into to fix clear coating on the roof of my car (BMW) . The more i watch,the more i would like to learn how to paint cars.

[@impulse_media]

This is awesome man! In June I am starting the auto tech program at a local Technical College, following up that program I was strongly considering welding or Auto Body. Throughout the duration of my courses I've acquired a 1986 AE86 Corolla to use as a learning tool.

[@HowToPaintYourCar]

Cool man nice car for sure. I am in Japan now :)

[@HowToPaintYourCar]

This may help vip.learnautobodyandpaint.com/exclusivevip

[@snay1345]

I am about to paint parts of my daughters old cobalt. It is a 14 year old car, is there anything you have to do to account for fading of the base coat of places that I don't need to paint? So that the new paint matches? I live in the desert and the clear coat has just peeled off some places.

[@vegitoblue7908]

U dont mind the overspray over your tool boxes? Do you get dust specks on the clear??

[@jimfeaster4837]

All your videos are great !

[@JohnDrach]

What brand spray cans do you reccomend and what is a good site to grab the cans from of you don't mind me asking

[@djdon28]

So far based off of this video I like what you're talking about and hopefully you allow me to be part of your VIP because I'm trying to do auto body just as a DIY at home for my own stuff

[@HowToPaintYourCar]

D Anderson check out VIP here: www.learnautobodyandpaint.com/vip-offer/

[@spiropittas5477]

What spray gun did you use for the clear? It looks like a red gun ?

[@radanphilip89]

trying to paint hood and bought primed fenders ebony black ford is what the car color is what do I need ? hood is already painted got from wrecking yard

[@alexandraseverino9346]

I like how you explain thing.step by step. Im learning alot .I staring to put hands on the real work.

[@HowToPaintYourCar]

Glad it was helpful!

[@j.w.7688]

You got ALOT of talent Bro. Very interesting...😎👍

[@donerae8682]

these videos are great man thanks i was able to paint my shaved engine bay on my ae86 corolla and got professional reaults.

[@HowToPaintYourCar]

Awesome man! You may like this one kzbin.info/www/bejne/nHzcaoytm7GEbLc too

[@garyhawthorne1678]

hello is autobahn a good base coat paint, im painting a truck victory red

[@aaronchandler4691]

Ty for helping to show us how to do things the fire way your a great teacher 🙏🕉️♾️☯️☮️

[@HowToPaintYourCar]

Thanks, man I appreciate it! Glad it helped. Learn more and get a free auto body guide at learnautobodyandpaint.com/free-autobody-manual

[@Farmer2492]

Hi fantastic videos i just have a question do you have to take the paint back to bare metal before painting the paint on its good but rubbed back to bare metal in a few places.Thank you

[@fonmagpantay]

do you a video on blocking accroos panel while still assembled or do you preppanels individually? how to have a staight line reflection brtween panels

[@michaelglenn2468]

You can do this without a paint booth and special respirators?

[@Supanova70]

Is it bad practice for home diy garage warrior to shoot base on full paint job and wet sand it days later then clear? Or do i need to shoot the whole car in base again?

[@paulshamblin6260]

Great job. Good info. Enjoyed it.

[@kevdogcle9955]

What a remarkable paint job bro. I would like you to teach me and cone help me. Repaint my 02 chev prizim. It has some little defects and spots of rust starting. But nothing major. But, the problem is don't have the tools or space to do a repaint job at. I would come to where you are. I would buy all the paint and stuff. I need to have you help me touch up my car.

[@HowToPaintYourCar]

K B, you can do it in your own garage or probably an empty space you can rent up. Check out VIP as I show you all you need to know about auto body work and paint! www.learnautobodyandpaint.com/vip-offer/

[@jeffhector1569]

Great gob i start learning paint by you to pain my car very soon but want to khow how to mixed paint and at what time to remove masking after applying clear and if i must sand the clear on all step thanks

[@HowToPaintYourCar]

Jeff, you definitely have something going there. Check out VIP if you want to get started with your own car projects: www.learnautobodyandpaint.com/vip-offer/

[@BulliKid]

What’s your opinion on plastic adhesion promoter. Is it necessary?

[@HowToPaintYourCar]

It’s good practice to use it on raw plastic... Then you can lay your primer on top of it sand it and paint it 😀

[@BulliKid]

BOSS PAINTER - Learn Auto Body And Paint! Thank you. Just bought a harbor freight gun and wana start experimenting. I will be getting your free book to start

[@hazythestoner2154]

Thank you, vary helpful. I'm planing on painting my car for cheap hopefully and I'm curious could i just use cans of spray paint and still end up with a good to ok job or do cans just do s!#% job compared to paint guns? and it doesn't have to perfect but just not bad. I'm only planing on painting 1 car and for as cheap as possible so i would like to avoid getting a paint gun. i would really appreciate some help or at least a comment? thanks