This by far the best and fastest way to get a new professional look on your parts.
Пікірлер: 129
@r3dwood877 жыл бұрын
Is it just me or does he look like the guy from baywatch
@keithcox42906 жыл бұрын
Omfg yes he does haha lool 😂🤣😅
@sharkwranglers75754 жыл бұрын
Thats so true 😂
@gamingzokyy11504 жыл бұрын
He does😂
@gamingembassy68605 жыл бұрын
He might not have a lot, but he figures it out with what he has. That’s what I love about him. Great video
@kaynebehenna15057 жыл бұрын
Definitely the best video I've watched of this type
@j.d.73217 жыл бұрын
I hope you dont clean your grill with the same brush
@vegan88257 жыл бұрын
lmfao
@JacksonSurette5 жыл бұрын
Right that’s what I’m saying
@johnmedley10427 жыл бұрын
just a lil help,,, 40 us to course,,, try starting with a 220,,, and instead of spraying so much stripper,,use two coats if needed..
@picksdussiesandarseholes78717 жыл бұрын
when using a paint stripper and its ready to remove use bucket or tub of hot soapy water and a steelo pad and it will come off easy .. dont use a bbq scaper also dont use 40 grade sand paper on a bike frame anyway cool vid
@l0gphroe7 жыл бұрын
Nice video mate, but next time try to pick a song without vocal :-) The vocal is interrupting your voice (5:17 fx)
@shavingryansprivate95725 жыл бұрын
Egg man
@robjieegoc83353 жыл бұрын
What is the name of the spray did you use to clean the paint?
@abrahamzuritagarcia74203 жыл бұрын
What kind of paint stripper did u use my guy
@christiancole71567 жыл бұрын
thanks bro helped a lot!!
@mikkloglo87377 жыл бұрын
if my bmx it rust can i still sand it down and me it look new?
@J0Z01177 жыл бұрын
Yes, as long as it is only surface rust. But if the rust has left damage to the metal then you can use filler to get it back to a full and smooth surface!
@mikkloglo87377 жыл бұрын
Jozo thank you 👍👍
@codybaumann9576 жыл бұрын
Do you have to use clear coat because Primer first second paint clearcoat does that make a big difference
@alimuhammad85857 жыл бұрын
Thanks for the vid bro
@sayanat.s91405 жыл бұрын
Super
@jokersg13336 жыл бұрын
Reply ok how much ml paint we need to print a BMX please reply fast tomorrow
@Sincerelykr7 жыл бұрын
Yo ass listens to bones too Cool vid keep it up
@mjkim29296 жыл бұрын
that remover is great
@xkswc7 жыл бұрын
Thanks for the helpful video
@fz4you977 жыл бұрын
after all which thing we use to shine bike
@emmanueljensen6047 жыл бұрын
Honestly if you got the red paint off the rest of the fork I would have just left it like that cuz that's looks good
@cuppatea91176 жыл бұрын
Fishin While kiddin. but u need Clearcoat otherwise it will rust
@codybmx89857 жыл бұрын
when you put primer on the bmx bar with out painting would that look cool
@nomad15307 жыл бұрын
Cody Bmx it'd be like a matte color coat I believe
@calholden90405 жыл бұрын
Nice video dude
@codybmx89857 жыл бұрын
I have the animal fork and the paint striper won't work I used 2 cans
@lilswoog12546 жыл бұрын
Would a ice cream cone work to hold the forks??
@wawawiwa___5 жыл бұрын
Yea pros use it all the time
@imchxpped19257 жыл бұрын
Sick vid
@ericakane42186 жыл бұрын
A little off topic but dude, you are a friggin cutie pie 🖤
@SavouryLobster5 жыл бұрын
Chill out n get some water. You seem thirsty
@vennom37736 жыл бұрын
Nice
@rjskate.z23195 жыл бұрын
What*s the colour
@maryloumerchant81155 жыл бұрын
What is the name of that songs
@UAVED8 жыл бұрын
What should I use to hold up a frame though?
@TheRoach10318 жыл бұрын
Ricky from TeamSETH hang them from something and put the rope or string or whatever your gonna use to hold it go through the headset or bottom bracket.
@UAVED8 жыл бұрын
poonjavi bmx thanks mane.
@soothingsounds9647 жыл бұрын
poonjavi bmx I'm watching your painting video, must I use paint stripper if I'm gonna use clear coat?
@robertsharp2867 жыл бұрын
Good vid
@asapcornerstone78517 жыл бұрын
dupli spray paint is the best paint to buy if you want to spray paint your BMX
@jackmcduff9607 жыл бұрын
You should try blasting it with a hose to get the paint off
@youngace36196 жыл бұрын
Jack Mcduff this is a joke huh 😂
@clevelandcavaliers376 жыл бұрын
wasting time and water
@gmcfiftythreee6 жыл бұрын
Lmfao
@adrianleo94656 жыл бұрын
He was talking about hosing it off after spraying paint removal. Smart Thanks for the tip
@JacksonSurette5 жыл бұрын
Next time you can use a water hose to get the stripped paint off of the frame
@benjamintickhill54507 жыл бұрын
songs?
@matthubbard9042 жыл бұрын
I stopped using sanding paper I use 3m sanding blocks
@gabelarocque48546 жыл бұрын
what song is in the background
@bassboostplug8626 жыл бұрын
Gabe LaRocque bones 3088
@curachristianpanganiban57126 жыл бұрын
3:01 what kind of chemical spray he used??
@youngace36196 жыл бұрын
Christian Cura it’s paint stripper
@youngace36196 жыл бұрын
Every one who sands there bmx parts for the first time always want to go raw with clear coat it’s so annoying just fucking paint it it looks dumb raw if you don’t know what your doing
@jlouservgt54417 жыл бұрын
nice looking
@mariosalgado46607 жыл бұрын
whats the name of the song poonjavi comment when u read my text messages plz
@TheRoach10317 жыл бұрын
Mario Salgado bones 3088
@abhijeettodkari4906 жыл бұрын
dont follow this video, wrong procedure, after removing paint sand it with fine sand paper and then apply 2 coats of "primer for alloy" in 2 hrs gap..which is easily available, again slightly sand the frame and then aplly 2 coats of color 24 hrs gap in both, and then apply clear coat on it easily available after 24 hrs of paint
@aginhantera14407 жыл бұрын
saya penggemar bmx tolong Carikan gerakan belakang
@cesarbustamante17336 жыл бұрын
Hola
@garrettboggs71144 жыл бұрын
No
@asapcornerstone78517 жыл бұрын
Rust oleum they fucking suck that's why you go to auto zone or Advance auto parts or any store that doesn't sell this's cheap ass paint
@tom_nobreaks64507 жыл бұрын
I would say don't use 40 grit cuz it's way to corse and will leave deep scratches in the metal. I always use a 120 grit for the paint removal and then 220 to smooth everything out. that's what I have found to be the best for bmx parts I have done several frames and forks this way. cool video BTW good editing and good shots dude
@aurteekay63393 ай бұрын
Noooooooooo 400-500 or more is the only way… takes longer but trust me your top cost will look beautiful. More microscopic scratches not visible to the human eye means more places for the paint to stick into. This is why you only use zinc rich primer on bikes after sanding or most people do… it dries and settles very slowly and thick to where it basically self etches into those small scratches that you can’t see causing your paint to stick better into whatever you paint. Something like forms this is very important if you want a professional job you also want to polish after. White primer for red paint. Gloss. Cheat codes
@andreshernandez50667 жыл бұрын
don't ever touch ur bike when it has paint stripper it burns like a bitch
@cuppatea91177 жыл бұрын
Andres Hernandez I learnt this the hard way
@dylanp92896 жыл бұрын
Dude i subed, you really seem to know what your talking about and i pick up my first bike in a few days and i gotta paint it so thanks dude :] have a good one ay
@eliasnoobps4fun3197 жыл бұрын
I used a thoothbrush xD
@MrPainYT6 жыл бұрын
eliasNOOB Ps4 fun Ha, never heard of that tool.
@griffendavis70907 жыл бұрын
bro you can get Matt clear coat
@Create_o_raptor7 жыл бұрын
can i just do a clear coat on the bare metal frame?? to keep the colour of the metal ?
@bigboyraclng7 жыл бұрын
DINO IDEAS yes
@n0ahdagreat1927 жыл бұрын
DINO IDEAS have u done it yet and. If. So. Did it look good
@Create_o_raptor7 жыл бұрын
N0AH DA GREAT nope. I wanted to buy a new bike if i learnt how to 360 by the end of this month.. ( just to check how motivated i am to continue bmx.. I learnt it tap).. i guess ill be getting a new bike .. So i prefer not to invest on my mongoose L60..
@Create_o_raptor7 жыл бұрын
N0AH DA GREAT umm.. My friend did that to his mountain bike.. And if your frame does not have rust or too many scratches, it will turn out good.. His turned out kinda good .. Except for the spots where he had taken off some rust .. It looks uneven there.
@n0ahdagreat1927 жыл бұрын
DINO IDEAS ok thankyou
@rolandomartinez92995 жыл бұрын
Where did u get the paint stripper?🙏🙏
@AndreLarroque5 жыл бұрын
cheat code: u can huff all that shit and the whole process is more fun
@nadia-jh5mq5 жыл бұрын
SESH
@noahmorley7012 Жыл бұрын
W song choice
@LahBMXenthuisiest Жыл бұрын
thanks bro
@sistercalhoun44445 жыл бұрын
you can spray it off with power washing at car wash
@luca1k5223 жыл бұрын
turning my forks black too and reppin sesh too while looking like a ruby da cherry copy, dope guy for sure
@macmanalo28545 жыл бұрын
wow
@letsgodosomething24476 жыл бұрын
Air craft remover dont burn your skin i got it on my hands before
@codybmx89857 жыл бұрын
if you can't reply please help me I did my bars my S&M perfect bars the paint came off I had the animal Forks I'm using paint stripper if for some reason it's not coming off I'm using paint stripper the same one that you use you got to do on a nice day when it's warm right
@TheRoach10317 жыл бұрын
Cody Bmx sometimes with factory paint it is really thick and can take 3 or more times. Make sure you leave it on for about 10-15 minutes before trying to scrape the paint off.
@GabrielPerez-je7jt6 жыл бұрын
2:30 song name!
@skyelee93983 жыл бұрын
Thanks homie 👍
@johnnyx14_7 жыл бұрын
can you link all things needed or put them in the description please ! thank.s
@SavouryLobster5 жыл бұрын
Just watch the damn video.
@datway4825 жыл бұрын
Hi
@mrdrift12438 жыл бұрын
I'll buy those tell ison
@TheRoach10318 жыл бұрын
mr drift who are you
@mrdrift12438 жыл бұрын
Pablo I was watching drift vids and then I made a account so I could sub to people
@viove52717 жыл бұрын
Can you send me the paint to get off that you did
@farhanfariz15366 жыл бұрын
mr drift la
@abhijeettodkari4906 жыл бұрын
dont follow this video, wrong procedure, after removing paint sand it with fine sand paper and then apply 2 coats of "primer for alloy" in 2 hrs gap..which is easily available, again slightly sand the frame and then aplly 2 coats of color 24 hrs gap in both, and then apply clear coat on it easily available after 24 hrs of paint
@franciscofonseca72366 жыл бұрын
How much paint do I need to paint one handlebar and one fork
@jaydeecodm48895 жыл бұрын
Francisco Fonseca 1 or 2
@atso19247 жыл бұрын
How long between coats?
@FabianBevan3 жыл бұрын
15-20 mins if it hot out.
@ayzah_trisy38957 жыл бұрын
what song is this
@TheRoach10317 жыл бұрын
FrostFD bones 3088
@wardensuzuki28987 жыл бұрын
How many cans of primer do I need for bars, forks, and frame?
@khanebaron79737 жыл бұрын
WardenSuzuki 1
@djdionne447 жыл бұрын
WardenSuzuki about 4
@wetbread45016 жыл бұрын
DJ BMX Playz wtf. Not even that's way too much. 1 is good
@djfma21156 жыл бұрын
1 or 2
@onetwo62636 жыл бұрын
WardenSuzuki
@bmxcody82237 жыл бұрын
I use paint stripper on my handlebars do I have to sand my handlebars too and what's a good sandpaper to use like 220 or 400? thanks dudes