How to paint chrome and anodizing

  Рет қаралды 237,914

sm designs airbrush

sm designs airbrush

Күн бұрын

Пікірлер: 170
@dbuckley100
@dbuckley100 4 жыл бұрын
As always, Simon Murray the absolute water borne paint go to man...and a super nice guy to top it off
@HellBoyKustomscom
@HellBoyKustomscom 6 жыл бұрын
Awesome Video Simon, info for anyone reading Simon gives top class service when buying products from him keep up the great work Simon Thanks for the videos
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
My pleasure mate and thanks!
@prstravelstips8523
@prstravelstips8523 5 жыл бұрын
Please contact number
@toonybrain
@toonybrain 5 ай бұрын
Very helpful - good info packed in a short video.
@mydemon
@mydemon 5 жыл бұрын
the video is incredible and the accent makes it even better
@salalatzo
@salalatzo 5 жыл бұрын
Great vid. I’m doing a helmet with multiple candy colors. I intended to mix 4040 bleed checker with all of my candies , would that be enough to stop any bleeding or would I need to spray 4040 directly over each candied area ? Thanks !!
@AutoBodyEverything
@AutoBodyEverything 2 жыл бұрын
I bought a pile of Createx candy and other Metallics along with spaz chrome kit. I’ll be painting Lexan rc bodies from the inside. I have 4040 and 4030 and normal reducer and fast reducer and some other brand of clear sealer… I know the candy needs to be pancaked with bleed checker before and after color layering to prevent bleed & blotch. I also know the chrome itself does not hold the same shine if clear coat direct over the chrome am I right? I noticed you didn’t use checker or sealer over the chrome prior to candy… did you seal the candy with anything prior to clear coat? Since I’m painting the RC body shells from the inside, I obviously do not need a clearcoat because the plastic has a shine of its own. But because I will be performing custom paint jobs in reverse order I wanted to ask if you had any practice with painting RC bodies and these paints. Because the first material to be laid onto the Lexan plastic is the candy color, and then chrome and then black. Now… Should I use a transparent sealer on the Lexan body before shooting the candy and will I also be using the bleed checker or sealer after the candy color right before spraying the Crome over the candy? I’m going to practice on glass or some other plastic first bcs this paint is expensive as you know lol and the rc bodies I have are $100+ each.
@joseolivares9942
@joseolivares9942 Жыл бұрын
Hey man i want to paint a brushed aluminum fuel door to look gold, if it’s already pretty reflective would I need to start with the gloss black paint?
@gs16gt90
@gs16gt90 Жыл бұрын
Holy and moly ! Those turned out pretty nice , always liked candy , now candy chrome ,,,,,, unbelievable , I tinted my sealer on my carbon fiber spoiler and turned out stunting , You just entrusted me to a new lvl ty Do you have any diy candy chrome on carbon fiber ? Ty and keep up the nice work
@aa-fs9re
@aa-fs9re 5 жыл бұрын
can you use white spray paint for the primer or do you have to use black for better results of color?
@sellwithjohnleopold
@sellwithjohnleopold 4 жыл бұрын
All I have is a 15 gal compressor... What's a good gun for a beginner... i want to anodize my motorcycle forks.... or is there a spray can version I could try ?
@KartFab
@KartFab 6 жыл бұрын
What about metallic flake on top of the candy? What would i need to mix to do flake on top, or what combination would be good to get the same color saturation/reflection but also get some flake in there?
@Denka187
@Denka187 3 жыл бұрын
would this work on a 3d printer plastic material ? , and if if you wanna do som patterns on this you do that first or last and then gloss over ? with patterns i mean freehand something on there like letters or something like that in a different coulour ? great video thanks
@SMDesignsAirbrush
@SMDesignsAirbrush Жыл бұрын
yes it will work on 3d print however I would shoot a coat of UVLS 4050 first....and do the patterns first and then gloss over
@TheSquintz21
@TheSquintz21 4 жыл бұрын
What clear coat did you use ? And is it airbrush ready or does it need to be thinned
@mvm3897
@mvm3897 6 жыл бұрын
Can you polish this out to get closer to a mirror finish before the candies?
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
Hi Matt. No I would not recommend trying to polish the quicksilver as it is a base coat and will not polish.
@mvm3897
@mvm3897 6 жыл бұрын
@@SMDesignsAirbrush I guess I meant buff. I know some "chrome"paints can be buffed a little to bring out a more mirror like reflection.
@monsurahmedkhan5197
@monsurahmedkhan5197 2 жыл бұрын
Wil this work on headlight relflectors
@jodiemarie3913
@jodiemarie3913 6 жыл бұрын
Just a quick question I’ve watched many vids of yours and they got me into art, Anyway I am looking into spraying a motorcycle tank and never used top coat, when do I remove my mask from the gas cap once I have applied the clear coat! Luving the chrome that’s amazing,
@Whit_Siever
@Whit_Siever 6 жыл бұрын
Do you have a recommendation on how to apply a chrome finish to automotive components? Mainly grille and door handles. Trying to get my ride to conform to current trend of Impalas, Altimas, Hondas having shiny door handles and trunk lid strips.
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
The methods I used in the video are the same as any automotive application. Just be sure to sand/prep the surface to be painted.
@chrisnorton9531
@chrisnorton9531 6 жыл бұрын
Really looking forward to using these mate.
@sveeart
@sveeart 5 жыл бұрын
Man I've been out of the loop for too long. This looks awesome Simon. I've got a life size R2D2 head to spray up to look like metal... will shoot an order over to you for some of this soon
@SMDesignsAirbrush
@SMDesignsAirbrush 5 жыл бұрын
Hi Svee. Things are always moving forward here at Createx. Thanks!!
@cleants8032
@cleants8032 5 жыл бұрын
My God, this is great. I want to spray paint on my Sennheiser microphone. How can I do that sparkly effect?
@ashtonmitch9969
@ashtonmitch9969 5 жыл бұрын
Metal flakes
@ashtonmitch9969
@ashtonmitch9969 5 жыл бұрын
Basically adding glitter
@laponiec
@laponiec Жыл бұрын
Hey, whereabouts are you based in Northern Ireland?
@frankkrischick3906
@frankkrischick3906 Жыл бұрын
which stuff do i need for anodizing ? the pages are 404 errored now
@embreesullivan2412
@embreesullivan2412 4 жыл бұрын
Can u paint fiberglass with this
@MSUICEMAN
@MSUICEMAN 5 жыл бұрын
You mention clearing them.... what clear do you use? I need a waterproof (not resistant) clear for my application and haven't found one that's all that compatible with quicksilver chrome yet.
@DiecastGraveyard
@DiecastGraveyard 3 жыл бұрын
Very nice Sir.
@apriliaisma2724
@apriliaisma2724 4 жыл бұрын
there is gray purple, is there pink gray?
@billfallon2372
@billfallon2372 3 жыл бұрын
How much would you charge to change my drums' lug casings and rims from chrome to gray chrome, the first one you did after the black coat?
@louisroussos2389
@louisroussos2389 6 жыл бұрын
Hello this procedure can be use on guns to change color? The body of the gun is aluminium
@iangreene8720
@iangreene8720 4 жыл бұрын
We need a video on how you sprayed the black!
@Spawn3DA
@Spawn3DA 3 жыл бұрын
Hello, why when you paint the color the reflection is blurred but later in the cut it looks much more reflective? Is it more reflective again when it dries?
@SMDesignsAirbrush
@SMDesignsAirbrush 3 жыл бұрын
Hi Abel, its more reflective when its clearcoated.
@simo6927
@simo6927 2 жыл бұрын
How to get it?
@allancaples2764
@allancaples2764 7 жыл бұрын
Great video Simon .
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
Thank You!
@jessewaughcom
@jessewaughcom 6 жыл бұрын
Do you think this might work on 3D prints? The prints don’t tend to have a super-smooth surface, but I’m wondering if a thickish primer would smooth them out sufficiently to facilitate a shiny result?
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
Hi Jesse. Impossible to say without seeing the surface but we do have clients that use our products straight over prints.
@CreatexColors
@CreatexColors 6 жыл бұрын
AutoBorne Sealer applies direct o 3-D printing plastics with excellent adhesion
@elespiritudeltigre9526
@elespiritudeltigre9526 6 жыл бұрын
There are some tricks about making 3d shits smoother, check that out
@prstravelstips8523
@prstravelstips8523 5 жыл бұрын
@@SMDesignsAirbrush plz contact nampar me iam Prasad from omam Muscat I want this paint please
@lammy9733
@lammy9733 3 жыл бұрын
But does it have to be smooth gloss black?
@SMDesignsAirbrush
@SMDesignsAirbrush 3 жыл бұрын
Its very important Lamar that the black is gloss and smooth.
@ayitsme1947
@ayitsme1947 6 жыл бұрын
Hey mate, been searching for black chrome vs black candy over chrome effects and you've done a killa job man!! Love your style of vids, very easy to watch!. Looking at your black chrome effect vs the black candy annodised effect - what would you say the difference is? The Black candy certainly looks to have a purple tinge or is that just the reflections? It's a bit hard to tell through the computer screen. Thanks again and keep killin those vids!! 🤙📽️🔝💯
@printrun5
@printrun5 7 жыл бұрын
I knew he is irish! :-D god i love irish accent so much!
@Knyght100
@Knyght100 5 жыл бұрын
Any issues with your results from not reducing? Comparing differing information from the TDS and videos like these.
@doanchi1
@doanchi1 5 жыл бұрын
Hi Simon do you think I could do this type of paint effect onto a carbon bike frame?
@asaibabd9785
@asaibabd9785 5 жыл бұрын
Is this coating conductive to the electrical current Thanks
@GuitarGuys7299
@GuitarGuys7299 7 жыл бұрын
Thanks for this video Simon! Do you know if the Candy2.0's would work over silver nitrate spray / hydro chrome?
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
You should have no problems with adhesion.
@artist_firdausi
@artist_firdausi 4 жыл бұрын
Can you please tell the coating material.
@MrMusiclover60
@MrMusiclover60 7 жыл бұрын
I just bought a new Beretta gun. Slide is Stainless which I intend to polish to a mirror finish but, the frame is anodized aluminum that I want to shine like the slide. Will it work on the gun frame? Also looking at the colors I may do the frame in one of the blue colors but in any case the question still is will it work for a scratch resistant finish on the firearm ? I am in South Ms.. Do you know a place that will do it for me ? Hope you have time for this. Thanks
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
Yes our paint will stick to aluminum but I would recommend shooting some 6000 sealer clear first. Im afraid I dont know of anyone in your area who could do it for you.
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
Im very sorry I missed this! The Quicksilver will stick to just about anything but always do a tape test after you have applied it. Im afraid I dont know of anyone in your area who could do it for you.
@TheLegend-wf4hw
@TheLegend-wf4hw 6 жыл бұрын
Can we paint this on a plastic material(Gundam) and still get this amazing shiny effect?
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
Yes the paint will stick to just about any surface.
@TheLegend-wf4hw
@TheLegend-wf4hw 6 жыл бұрын
sm designs airbrush thank you
@Jarhead1313
@Jarhead1313 6 жыл бұрын
What are those body shells called? I'm just getting into Airbrushing for RC bodies and I believe what you're using to demo these paints would suit my needs. Thanks
@joeyalvarez3857
@joeyalvarez3857 6 жыл бұрын
Jonathan Davis speed shapes
@Jarhead1313
@Jarhead1313 6 жыл бұрын
@@joeyalvarez3857 Thank you so much! I've been taking 20oz Coke bottles and cutting them up to test paints,now that I know what speed shapes are called maybe I can finally order some lol once again a big thanks!
@joeyalvarez3857
@joeyalvarez3857 6 жыл бұрын
Jonathan Davis you’re welcome! that’s a great way also .. are you using base coat ? Autoair?
@Jarhead1313
@Jarhead1313 6 жыл бұрын
@@joeyalvarez3857 yeah that and Wicked, pretty much all of my paints are from Createx, except for a few bottles of Faskolor
@athenazoey5093
@athenazoey5093 4 жыл бұрын
can i use this method on Gunpla ABS plastic?
@gsoulmachine6852
@gsoulmachine6852 4 жыл бұрын
How much do I need to spray a complete car?
@AlejandroGarcia-ko3sn
@AlejandroGarcia-ko3sn 5 жыл бұрын
What kind of clear Matt you said ? What's flash time for clear ??
@SMDesignsAirbrush
@SMDesignsAirbrush 5 жыл бұрын
SSR Matte, approx 15 min flash off.
@sfc415rider
@sfc415rider 6 жыл бұрын
Looks stunning. Thanks for sharing
@amyliguori1009
@amyliguori1009 6 жыл бұрын
Can I spray any kind of spray paint?
@amyliguori1009
@amyliguori1009 6 жыл бұрын
Scratch that!
@Knyght100
@Knyght100 6 жыл бұрын
I'm fairly new to painting and have been reading and watching for research. My question is if you're not supposed to scuff the surface how does the chrome and candy stick? Thanks in advance.
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
The Quicksilver Chrome has been formulated to adhere to the surface without the need to sand, unlike most other paints.
@Knyght100
@Knyght100 6 жыл бұрын
Thank you I appreciate the help.
@Knyght100
@Knyght100 6 жыл бұрын
I have another question I thought I already asked along with my original one, but must've forgotten: Did you need to prep the speedshapes at all for the gloss black or is that also made to adhere without sanding/priming?
@3dprintingbiker693
@3dprintingbiker693 6 жыл бұрын
I'm looking to do a set of forks for my motorcycle, and I am going to need to tape off where the triple tree clamps onto the forks because it is a very tight fit. How long should the paint cure be for I start removing the tape?
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
I would leave it at least overnight.
@thomruble4863
@thomruble4863 6 жыл бұрын
sm designs airbrush sounds great, thank you!
@AlejandroGarcia-ko3sn
@AlejandroGarcia-ko3sn 5 жыл бұрын
Where you buy the colors and clear you used ??
@SMDesignsAirbrush
@SMDesignsAirbrush 5 жыл бұрын
Follow the links below the video.
@Knyght100
@Knyght100 6 жыл бұрын
Hello just a quick question: Would there be any issues spraying candy2o on top of another brand/product of clear coat?
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
none whatsoever.
@Knyght100
@Knyght100 6 жыл бұрын
Thanks a bunch!
@armenruzannaarshakyan2068
@armenruzannaarshakyan2068 7 жыл бұрын
Hello I want to use the candy paints but my tether car releases methanol. Does methanol wear the paint down and what clear coat should I use?
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
You will need to shoot a reputable 2pack clear-coat over any base paint.
@rickythomas8930
@rickythomas8930 4 жыл бұрын
If I wanted to get this done professionally to my motorcycle any recommendations on a shop in Texas?
@mdkeyam167
@mdkeyam167 3 жыл бұрын
Llll Vu
@amyliguori1009
@amyliguori1009 6 жыл бұрын
Are all your colors non porous?
@dumbuddies
@dumbuddies 5 жыл бұрын
Do you have bulk to do a whole car
@SMDesignsAirbrush
@SMDesignsAirbrush 5 жыл бұрын
Yes. If you follow the Airbrush Paint Direct link. Thanks!
@Erosennin450
@Erosennin450 7 жыл бұрын
are these colors possible with just spray cans?
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
No they are in bottles only
@amyliguori1009
@amyliguori1009 6 жыл бұрын
Will it work on a wood cane?
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
Yes if it is non porous and gloss black.
@q8kw484
@q8kw484 5 жыл бұрын
how much would paint ? can i send you the item i wanna coler
@samuelvasquez8170
@samuelvasquez8170 7 жыл бұрын
What is the ratios, airbrush needle and air pressure if am using an Iwata Eclipse airbrush?
@CreatexColors
@CreatexColors 7 жыл бұрын
Ratio: candy2o 1:1 4030 Balancing Clear. 4104 Quicksilver Chrome and 4258 Gloss Black are applied out of the bottle without reduction. A 0.5mm airbrush tip-size is recommended with psi set somewhere between 25 - 30 psi, adjust as needed for your specific set-up
@samuelvasquez8170
@samuelvasquez8170 7 жыл бұрын
Thank you.
@verticalpicsllc5575
@verticalpicsllc5575 4 жыл бұрын
Wow! If only I could put one of those on my RC car!
@swordofgabriel
@swordofgabriel 7 жыл бұрын
Thanks Simon! Good stuff for sure.
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
Thank You!
@4687878
@4687878 7 жыл бұрын
Does anodized paint work on metal, and steel, like cars, mini bikes ?
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
Yes you can use our paints on any surface. Be sure to apply a self etching primer first if you are painting on bare metal. (mild steel)
@rayianpennycooke8391
@rayianpennycooke8391 6 жыл бұрын
sm designs airbrush what is a self etching primer? An do they sell it on the link?
@StanDepew
@StanDepew 6 жыл бұрын
What size needle are you using in this video it was hard to hear
@StanDepew
@StanDepew 6 жыл бұрын
And what PSI was your compressor set at
@samuelvasquez8170
@samuelvasquez8170 5 жыл бұрын
Where can I find the quicksilver chrome paint
@SMDesignsAirbrush
@SMDesignsAirbrush 5 жыл бұрын
Hi Samuel. If you click the links below the video it will take you to our shop. Thanks.
@charlesdouglas9199
@charlesdouglas9199 5 жыл бұрын
How many mnts between coats?
@SMDesignsAirbrush
@SMDesignsAirbrush 5 жыл бұрын
depends on conditions but typically 10-15 mins.
@charlesdouglas9199
@charlesdouglas9199 5 жыл бұрын
@@SMDesignsAirbrush thanks for the info sir
@amyliguori1009
@amyliguori1009 6 жыл бұрын
Non porous spray?
@AutoBodyEverything
@AutoBodyEverything 2 жыл бұрын
Remind people that the tape on your left arm is too keep the lint from getting blown off your sleeve and land on your paint job since the item painted is so close to your cloths. ….. it may seem far fetched to some of you watching but… to achieve PERFECTION you must create the PERFECT conditions or environment. All it takes is one tiny microscopic error to go from PERFECT to “oh that’s cool” anyone can get lucky doing something perfect but the real question is can you get it perfect every single time no matter what. I’m enjoying this video bcs it hasn’t made me cringe lol. Once a pan painter reaches a level of perfection, anything short of perfect is a nightmare lol.
@xtear0
@xtear0 6 жыл бұрын
Hey, so I have an Airsoft M4A1, and I am planning on giving it a nice orange chrome look, just like the Atomic Alloy skin from CSGO. I have a mix of plastic and metal surfaces, will this work on both types? Also great tutorial btw.
@biscoot4251
@biscoot4251 6 жыл бұрын
This work on iron or aluminum?
@ayitsme1947
@ayitsme1947 6 жыл бұрын
I've use the candy black, as per Simon's example, on aluminium wheels. I sealed the wheels first using the autobourne black sealer 6002.
@shoominati23
@shoominati23 6 жыл бұрын
Where do you get the mini car shells from?
@flexhoncho6272
@flexhoncho6272 6 жыл бұрын
How could you apply this process to RC Car and Truck painting since the coats would be done in reverse order?
@CreatexColors
@CreatexColors 6 жыл бұрын
Start with candy-chrome mix, then apply 6003 AutoBorne Sealer Grey as the backing color
@DaveyGa
@DaveyGa 6 жыл бұрын
CreatexColorsCo ... As in mix the candy and chrome, then spray??
@charlesdouglas9199
@charlesdouglas9199 5 жыл бұрын
U save my day thanks
@rumenstanev7747
@rumenstanev7747 6 жыл бұрын
What clear coat you use in this work? Thank's!
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
MaxMayer 2 pack, high solid.
@rumenstanev7747
@rumenstanev7747 6 жыл бұрын
Thank's!
@foredrums
@foredrums 6 жыл бұрын
Fantastic explanation, thank You master!
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
My pleasure Jorge.
@andplair1154
@andplair1154 5 жыл бұрын
Can you do this on leather shoes?
@SMDesignsAirbrush
@SMDesignsAirbrush 5 жыл бұрын
Its possible but not ideal, really intended more for hard surface, if you are going to try it I recommend spraying 5092 flexi adhesion promoter first.
@normanbeaulieu4204
@normanbeaulieu4204 4 жыл бұрын
sm designs airbrush Would you mix the 5092 with the gloss black and the silver and the candy or just before the gloss black. Where in the process would you spray the 5092? Also can you just mix it into the paint Instead of having it be it’s own coat
@Jarhead1313
@Jarhead1313 4 жыл бұрын
Wow if only I could airbrush my Rc bodies to look like this...
@carlbishop77
@carlbishop77 6 жыл бұрын
how would I get a matt candy blue effect?
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
By spraying a matt clear.
@pedrinhomxchromo6503
@pedrinhomxchromo6503 Жыл бұрын
Alguém sabe como fabricar essa tinta efeito cromo
@tomconner5067
@tomconner5067 2 жыл бұрын
He's been in the states a while but I can tell he's either north eastern European, or from maybe South Africa, or some remote area of Canada.
@jasonbrittain3316
@jasonbrittain3316 7 жыл бұрын
can i spray 2pac clear over it
@craighkennedy
@craighkennedy 7 жыл бұрын
yes
@MR.Vintage2stroke
@MR.Vintage2stroke 7 жыл бұрын
I have a cylinder head that I want to anodize candy blue it goes on top of a cylinder on a ATV
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
should be fine
@dirtyred9376
@dirtyred9376 3 жыл бұрын
I would like to do gold chrome then lay my candy
@romeogonzales4272
@romeogonzales4272 3 жыл бұрын
So how long did he wait to anodize the chrome 👀 till it dries ?
@SMDesignsAirbrush
@SMDesignsAirbrush 3 жыл бұрын
several hours after quicksilver applied before Candy application.
@kevinlegobrickmaster8015
@kevinlegobrickmaster8015 6 жыл бұрын
I’ve seen people selling custom chromed lego bricks and ended up here lol anyways do you guys think this would be the same procedures on how they do it?
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
I would imagine so.
@PaulVanDenton
@PaulVanDenton 6 жыл бұрын
no, probably vac metalised
@iBLACKMORAL
@iBLACKMORAL 5 жыл бұрын
But steel is heavier than feathers
@mightymoe4u2
@mightymoe4u2 6 жыл бұрын
Very cool. Kinda looks Like a satin finish
@roberthenry5900
@roberthenry5900 7 жыл бұрын
would this be ok 4 helmets
@SMDesignsAirbrush
@SMDesignsAirbrush 6 жыл бұрын
Perfect for helmets.
@MR.Vintage2stroke
@MR.Vintage2stroke 7 жыл бұрын
Can you do this to a cool head it
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
Dave I dont understand your question.
@ianmoran1530
@ianmoran1530 7 жыл бұрын
Is this possible on any material such as plastic, metal, or even poster board?
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
Yes Hugh. The quicksilver will stick to just about anything. The speed shapes Im painting in the video are un-sanded plastic.
@LogicRailTech
@LogicRailTech 7 жыл бұрын
If the chrome is applied to plastic “knobs” and then handled will the finish get worn off? I’m trying to get the look of chrome knobs without the cost of actual metal!
@SMDesignsAirbrush
@SMDesignsAirbrush 7 жыл бұрын
You will have to apply a clear-coat after the chrome.
@LogicRailTech
@LogicRailTech 6 жыл бұрын
Which clear coat would you recommend which is compatible with this paint?
@knucklehead2967
@knucklehead2967 7 жыл бұрын
Hi Simon just wondering if there's a video how to clean out the candy out of your spray gun also how to clean out the waterborne sealers thank you very much
@CreatexColors
@CreatexColors 7 жыл бұрын
4012 High Performance Reducer works as a cleaner to rinse a spray-gun or airbrush of AutoBorne Sealers, candy2o, or anything mixed with 4030 Balancing Clear. Having some 4008 Restorer handy also helps www.autoaircolors.com/paints/4008.html
@ThePoleLine
@ThePoleLine 7 жыл бұрын
CreatexColorsCo game changer as usual
@CreatexColors
@CreatexColors 7 жыл бұрын
Thank you! We appreciate that, very motivating to keep pushing our paint's performance
@CreatexColors
@CreatexColors 7 жыл бұрын
We just made a new video on how-to clean after painting with newer Auto Air Colors products such as AutoBorne Sealer, kzbin.info/www/bejne/gHOzmZKQnbRojbs.
@prstravelstips8523
@prstravelstips8523 5 жыл бұрын
@@CreatexColors I want this paint please contact nampar
@Bubbaspiff
@Bubbaspiff 4 жыл бұрын
Great, now I can make a glock | fade
@tulshirambhivkar1371
@tulshirambhivkar1371 Жыл бұрын
🔥🔥😍😍🌈
How to spray onto Hydro graphics
6:31
sm designs airbrush
Рет қаралды 12 М.
Making the candy2o Board
11:03
CreatexColorsCo
Рет қаралды 5 М.
The Singing Challenge #joker #Harriet Quinn
00:35
佐助与鸣人
Рет қаралды 15 МЛН
HELP!!!
00:46
Natan por Aí
Рет қаралды 46 МЛН
ROSÉ & Bruno Mars - APT. (Official Music Video)
02:54
ROSÉ
Рет қаралды 285 МЛН
Anodize Your Own Parts any Color with Household Products
6:35
TITANS of CNC MACHINING
Рет қаралды 3 МЛН
Spraying a HyperShift Over BLACK 4.0 (The Blackest Paint on Earth)
7:24
The Most Important Airbrush Beginner Tip
4:49
Airbrush Asylum
Рет қаралды 1,5 МЛН
Candy Over Chrome
22:05
The Gunman
Рет қаралды 616 М.
We Found the GALAXY Pigment - Need to Spray This NOW!
12:11
DipYourCar
Рет қаралды 1,6 МЛН
5 INSANE Spray Painting Tricks EVERYONE Should Know
26:42
Duncan Custom Airbrush
Рет қаралды 717 М.
Testing Inspire Chrome & Candy Gold Paint - Great Gold Chrome !
30:14