How to paint Weathering effects - HD Tutorial

Thank you for watching this free tutorial, if you want to support us and watch more awesome content go to: vimeo.com/awak...
This time Medows show a really cool trick on how to make a weathering effect on Rhino.
For more content check out:
/ awakenrealms
www.awakrenrelams.com
Music: The Complex - Kevin MacLeod (incompetech.com)

[@TB1439]

OH MY GOD.....That Heavy Chipping fluid is fantastic....I must get that my self. Thanks for the tip with this tutorial. :D

[@Hashugan]

I watched this video lot of times. It's really amazing. Congratulations!!! Its an awesome tutorial.

[@zoglin]

Cool effects. Thank you for posting this tutorial.

[@iryairya2008]

Now that is how you make a realistic effect!

[@claudiociseria]

Thank you for sharing your techniques

[@davesmith9844]

you made it look like my first car!

[@stravenwolf]

Great tutorial, what ratio do you mix the GW paints when spraying them?

[@HarleyAssi]

+Michael Henderson One can't really say that. All the colors react differently. Some colors go 1:1 some thicker, more opaque colors need like a 3:1 ratio. Its really just hit or miss. If your brush keeps clogging -> need more thiner.

[@tyjo7265]

Holy smokes this is incredible

[@JM.....]

What mixture of water and paint do you uses for GW paints with your air brush, couldn't get mine to work properly, love your models

[@JayAdan]

Try this - How to Thin Citadel Paint for Airbrushing

[@awakenrealms]

It really depends on type of paint, air pressure, size of painting area etc. I never measure it but adjust it accordingly to needs. Milky consistency is a closest thing I could advice :)

[@ravagevii]

Awaken Realms what psi are you currently working at on this vid? Sounds about 30-35.

[@Marlerc11]

Vallejo flow improver!!!! a couple of drops of this and a couple drops of HO with any acrylic works wonders in an airbrush

[@marcomarterer7232]

masterly done! thanks for sharing

[@olivergregory3397]

What colour would you change out to change the base colour scheme? So instead of white green or metallic blue?

[@EC-qe3bj]

great tutorial i painted a rhino jsut like it not as good but still looks great

[@DarkDioStudio]

Fantastic dimensional paint work!! You make me wanna start playing with my airbrush again.:D

[@Maxtorym]

What airbrush and compressor is good for this job?

[@sidpoole2k]

Hey, great tutorial. Could I ask what you thin your 'ard coat with? Is it just water or thinner?

[@HarleyAssi]

+sidpoole2k +James Silverio I can tell you that I use Valleyo Air Acrylics Medium on a 1:1 ratio. Sometimes I just use Water, it works too.

[@alexanderthegreatsdad.3831]

Please help. Does this work if sprayed directly onto stainless steel? Very smooth finished stainless? I can't find info on what paint is best. I'm planning to get started with airbrusing on some stainless 3d model... Thanks

[@BlueSkys73]

Great work!

[@DoomDarkness]

amazing! great work!

[@Not_So_Super_Mario]

how long do you wait after the last base coat before you start brushing with water?

[@Malthus]

Mario Montes You can start chipping ahead as soon as that coat is dry...so not long after when airbrushing. But you could wait as long as you like...because heavy chipping will always react to water...that is if you apply enough.

[@Not_So_Super_Mario]

Hard-Edge Painting I tried it on some tanks, looks really cool

[@HarleyAssi]

+Hard-Edge Painting My LFGS told me that the chipping fluid can only be activated for a certain amount of time. After a day or so it wont react with water anymore. Is that wrong? (Cuz if it is one better never forgetts to put another matt coat on the vehicles, not to wear of more color than intended due to touching while playing :-o )

[@Malthus]

Michael R. No, it's true. You need to act swiftly after applying fluid...also depends on how much fluid you added. And yes, varnishing is always a good idea.

[@HarleyAssi]

Yeah, I did not realise how swift when I did a test piece yesterday. I was putting 3 layers of the medium (the lighter worn effect of the two) on my rust, dryed it with the hair dryer, then put 2-3 coats of the base tone on top, did a light wash.. couldn't have been more than a few minutes but when I took my wet brush, stuff was veeery hard to get off (and the wash was washed away). Not my best first experience here. Did I make a mistake here?

[@jacobcolley8954]

@ Awaken Realms Do you think this weathering would work well with a camo pattern on the top instead of the screaming skull/rhinox hide?

[@HarleyAssi]

+Jacob Colley Why exactly shouldnt it?

[@Hashugan]

Do you have any picture of the vehicle all finished?

[@miedde]

Well done tutorial.

[@antoniodavid5889]

Good job

[@poxous3854]

Amazing look

[@JJS432]

Are you thinning your 'Ardcoat? If so what ratio?

[@HarleyAssi]

+James Silverio I can tell you that I use Valleyo Air Acrylics Medium on a 1:1 ratio. Sometimes I just use Water, it works too.

[@kaonashiyoshi3665]

what is the ARDCOAT like a sealant?

[@Rosstafa]

Yes it's a gloss varnish/seal

[@pablogonzalezvazquez9612]

oooooooooooooooooooooooolllllllllllllllllllllllllllllleeeeeeeeeeeeeeeeeeeeeeeeeeeee!!!!!!!perfect

[@KISAFARI]

excuse me I dont talk english very much well and I can´t understand what you say this How to paint Weathering effects - HD Tutorial can you tell me please ? it is a great tutorial , but this part is essential and I dont understand thank you

[@HarleyAssi]

+Francisco Javier Palavicino Troncoso Sooo... what language du you speak then? What he says is: "Now I use a large brush and water it to activate the heavy chipping fluid" Hope its still interesting for you, pal ;-)

[@KISAFARI]

+Michael R. thank you I speak spanish , can read adn write english in a good way , but I have problems whit the phonetic . thank you again

[@HarleyAssi]

Your welcome buddy. Being from germany I had to listen to it a couple of times myself to get it straight ;-)

[@DarthTellor]

Watching this I realized why everyone ever mutes the sound of the air brush.

[@DarthTellor]

However, this looks like a modern painting tutorial. Didn't even notice it's 7 years old.

[@pioterekl]

moglibyscie jakies tlumaczenie dać >(

[@darleybgl]

your painting is great but do you really think that any army would go in fight with rusty tanks?

[@HarleyAssi]

+darley bgl Did you take into consideration that those vehicles are some 10.000 jears old? This being said, the condition of those vehicles is outstanding ;-)

[@Rosstafa]

Death Guard.

[@pazuzu_666]

Ummm... yes? Of course they would. Do you think in 40K they would take tanks back in to the body shop after every scrape, bounced shell, Tyranid attack? In WWII any tank that saw battle and lasted 6+ months had rust all over them. The didn't pull them off of the front line for a paintjob! If they ran, they fought.

[@jackstubbings4473]

FUCKING LOVE THIS ONE 🔥🔥🔥

[@sonicsun1]

1000 psi

[@sameelatif]

>when you gloss varnish over a paint chipped / rusted effect to prevent chipping and weathering, hmm

[@ArcanePath360]

Okay all you're doing is adding loads of layers of different colours I don't see how... oh wait you're adding water with a brush, okay what's that going to do? *Shit that is actually a really cool trick!* Nice one.