How to pair & Program VIPER 2-Way Pager remote control (7345V) [HD]

Check out the latest version of the Viper responded: amzn.to/2amLj3C
To download the manual please first subscribe to my channel for future updates , than visit the following link hosted by Halcyon Technologies, Inc - Security Cameras to have the manual:
www.halcyoncctv...
comment if you have any questions.
In this video guide i will show you step by step how to pair a 2-way LCD pager (7345V or 7341V) remote control with 3305V or R350 Viper car alarm system.
* Comment you like to get a copy of the full installation manual for the R350 alarm system

[@shedwashington3661]

Tom U Rock! I don't feel very smart when it comes to things like this but you made it very easy to understand. Thank you so much! My old remote just fell apart!

[@2815Juan]

You saved me a trip to the audio place that installed my alarm. Didn’t realize I must have hit the program button. I set it back to the #1 setting. All good now. It was moved to 4

[@mazinfb]

Same thing for me I was trippin

[@deborahrichardson6514]

Thank you for your comment! This just happened to me, like 30 seconds ago and YOUR comment saved me a trip to the audio place! ❤

[@christopherjewth8458]

I was trying to program a 479V remote to my 791XV system and was having difficulty until I found this video. Thanks a lot!

[@v1inca]

Thank you for this video. I have the 350 security and noticed instead of pressing 7 times to get the 7 blinks, i had to press it 8 times in order to get the 7 blinks. Tried it few times to confirm it but it works now. Thank again.

[@websterzx10r1]

Thank you for the video. I lost my extra remote will be ordering another. Thank you again for simple and clear instructions on how to program the remote.

[@redgieburks2070]

Where did you order your replacement remote?

[@websterzx10r1]

@@redgieburks2070 I found someone on ebay a sound system store selling a refurbished alarm system like mines so I brought the whole unit again for cheap due to my control module going bad on my system. Killed 2 birds with 1 stone.

[@jeffreypua1981]

Thank you so much this worked. I have a viper model alarm r350 my old remote was so old the buttons didn’t press and work. it was a 7341 v/p/x got a 7345v for the pager function. put key to on, press valet button 8 taps and held on 8, press and hold lock button on remote, some beeps let go of valet button and turn key to off. worked! thanks

[@michaelthunquest3341]

The IMPORTANT thing to note is that on the 8th press of the Valet button, DONT release it! Let the LED flash 7 times - then hit LOCK on the remote - THEN release the Valet button!

[@michaeltuttle9278]

Thanks for info., very helpful. That same procedure worked on my Clifford 3305X and Matrix1 for the 2-Way and the 1-Way remotes with one caveat; I had to press valet button 8 times to get the 7 blinks on the LED before pressing the lock button on remotes..

[@mhoffer11]

You saved me bro. I too have the 3305x and had to push valet 8 times

[@Swpmp]

Can you tell me how to use the remote starter on the Viper remote you used in this video

[@jamesyoung7230]

You need - Key - Remote Entry Fog - Access to the Transmitter Control Button on the overhead control centre. To Program the Fob - Open the driver door (NB: I had my cabin light switched off to avoid accidentally leaving it on. BUT ... the only way the alarm knows if the door is open is by the interior light coming on. So, you need to have the interior light set to 'on' when the door opens. Otherwise the programming does not work.) - Turn the key n the ignition to the 'One' position - Press the overhead transmitter control button 7 times THEN PRESS AND HOLD ON THE 8th PRESS (At this point the alarm will chirp) - Whilst still pressing the transmitter button press the REMOTE KEY FOB LOCK BUTTON (At this point the alarm will sound, briefly) - Turn the ignition key off - Close door - Test Key Fob programming has worked by arming and disarming the vehicle with the fob.

[@rwturbo]

I will try this tomorrow. My lcd transmitter died and it had been warning me but now won’t control the alarm. Just the 1 way works. Thanks !

[@MatthewNugentmonty54]

How do I reprogram my trunk back to the AUX button? It was there but now the aux button doesn't do anything on any of my fobs.

[@RustbustersCA]

Mine doesn't acknowledge the 8 buttons it just keeps blinking with the blue armed light. I can lock and unlock my door but it wont even try to start

[@RustbustersCA]

The alarm never chirps

[@100SpokeRiderz]

Thank you so much 4 posting this i just got my old Viper Alarm on my Chevy Tahoe back up & going 👍👍

[@Carlitobruh]

this just saved me 20 bucks. and an unnecessary trip to get it programmed... THANKS

[@SurfsupTom]

+Carlitos jr You welcome, saved my self almost $80! haha :)

[@Madvillian]

i got an extra one when i bought my car and a guy at my local best buy did it for free

[@imawoodgrain]

Thank you. This helped me find that I had a valet button they never told me about. I was able to program my remote to work with the alarm.. :)

[@senowobe4552]

I have the same remote system, and the led light keeps blinking on and off while it's locked, does this mean it's armed? And will this drain the battery constantly blinking?

[@KD-mm3li]

On my system the little bar at the bottom of the remote has 5 black bars halfway in it. Is that a cause for concern?

[@ronaldhemmings2476]

You stated the button is right hear and the LED is right here , what is the first button you are referring too ?

[@tregua24]

So with the door open you turn the ignition on, press the ballet bottom 7 times and hold it until you hear a beep? I have a viper 5900, I wonder if it works the same.

[@ustreasurehunt5009]

Recently bought a car with this system, previous owner said that it stopped locking and unlocking doors. Still works but I have to lock the doors manually and then I can arm the alarm. Any suggestions please, maybe I need to reprogram?

[@jodyfrancum7321]

I’ve got a viper alarm & blue led is staying on & I don’t have key fob . What’s my opinions ?

[@twjkumliab7382]

Hi what happen after you pair it, but still not responding to the remote, do you have any Idea what cause it not respond. I got a new remote pair but still not working. Bought a new responder, but still not working.

[@danieldenham1085]

Push it 8 times for 7 blinks, press and hold the lock button, then press the valets 8 times again then release the lock button and that is how it basically worked for me. Door locks as well

[@ant66limo44]

Thanks ! Got all remotes re programmed , great instructions .

[@robertburns3103]

I have a question. I can remotely start my car , I can lock and unlock my car no problems. But when I lock my car my remote beeps but sometimes my horn does sound. I've check all my fuses and there's power going to my horn. Also when I don't get the horn sound when I lock or unlock my car my horn itself does work. Any clues why this happens..

[@cjp9382]

i tried it and it does not arm or disarm but when i use the old remote the arm and disarm symbol does change on the new remote

[@tamykacharles6276]

I want to adjust my sensitivity of the alarm... if I hit the vehicle the alarm does not trigger

[@LiathBahjatNorCal]

Why remote start isn't working? I have remote start in my truck, used to work with the factory system, but now isn't. I reprogrammed the remote multiple times and still not working. Alarm goes off when I hit the button.

[@Your32Maker]

10-yrs later, this came in handy...

[@solsticedr1fter394]

Do I need to reprogram my key if I have to change the battery on my key?

[@johnnyo5237]

Hey Tom....On my 7345V remote, there is a very small number 2 on the display screen right in front of the car image. I saw a number 1 on your remote. What exactly is that number 2 for? I think I might have missed it up. Thanks Man!

[@williamalberts4585]

Great Video, I'll program mine 2morrow. Thanx!

[@gbbghhh8153]

Can you still do it if you loose the original control and no keys for the car ??

[@carlosgonzalez9808]

After the 7 led flashes. What do I press on the remote? Do I press the aux button? Or the program button on the back?

[@vMihai90]

can you set up the volume of the remote alarm when are some "unknown activities" ? i mean its sound kind of weak, needs some higher volume

[@jadanpass7554]

Can you open the trunk and hit the star button and the alarm go off the way you did it?

[@shahzadam21]

Hello there i have Viper 5301 in honda 2002 its working very good but i lost my 1st remote i have 2nd one can you help me out how can i programming other 2nd remote Thank

[@josesalazar6192]

Just fyi, hes pressing a lil toggle button, i was looking for it on the transmitter itself, other videos show it on the antenna... i couldnt tell what he was showing at 1st

[@enriquemore3332]

How can I email you to get the manual? You are the best!!! Now my system is working perfectly!!! Can't thank you enough!!!

[@gbbghhh8153]

Do you need the car key to put it on the on position???

[@kushwidow]

Can I get a copy of the manual cuz I also find it very hard to not find it

[@hectorreyes-kv8hp]

I bought a used FJ cruiser without FOB W will that remote work if I dont have code

[@leverneschiazza2650]

Hey sir can you help me? I’ve been trying to program mine and I can not?

[@wunfstsrt7716]

hey tom I'm trying to reprogram my remote I had the old version and had a guy program it fir ne and one day it stopped working I'm doing the procedure but it won't sync I push it 7 times and hold and the alarm needs and when I push lock button on the remote it doesn't work what am I doing wrong.

[@drandreaswilson]

Hi Tom. My Viper keeps unpairing randomly. Do you have any knowledge of why this happens and how to resolve the issue?

[@garrywalsh5051]

Thank you for this video.

[@StupidFastRC]

I really loved your clip. Great stuff! Thanks for posting.

[@armandojimenez2373]

I have a python remote start alarm system and have the python transmitter 479 vpx the instructions that came with it say channel 1 for remote start. Question is what channel should I go with? 7 or 1? And what button on transmitter should I press when pairing?

[@EminenTone]

You rock my man!!! Thank you so very much...

[@odblou461]

wondering if you could email the manual. just bought a used truck that has no remote for the viper system. hoping I can buy one from best buy and program it. is this possible.

[@dasboot360]

Are you pushing the little black antenna transmitter ?

[@georgepaz7012]

wasnt what i needed but helped out !!! thanls

[@PeterKenmex]

in the second 59 there is a small button in the lower right, what is that button for?

[@manueljg9]

Hey tom I need help programming my remote but mine is the old remote on this video not the one you are programming

[@rayrayqbaby]

My nephew lost my remote to my viper car alarm system. It looks exactly like the old remote that you have. The model # is 3X05. I'm trying to figure out if the new one you bought is also compatible with model 3X05. If you know, I'd really appreciate your help in finding this out Thank you

[@jerrylilkrumzy3506]

What does the transmitter look like does it have a blue button?

[@LividLeon]

Can you add a second 7345v or adding a second will erase the first.

[@MrBubinski777]

Mine has a garage door opener function but I cant seem to get my opener and the remote to sync

[@benshmino3137]

Hi do you think this method will work with newer style remotes I have the 7345L but want to pair a different remote thank you !

[@paulm1521]

Hi can u send me the manual when unlock car beeps to loud in morning

[@Quasifinity]

Great this helped me out much, though it looks so much easier when you do it.

[@mikelee9608]

What if you have a remote starter with alarm? What number to use 4 or 8?

[@roboi1624]

the new remote that you showed on your page would that same program work to program the blue remote your

[@anthonycanita8024]

My key faub won't receive right anymore it's on 5 when it should be on 2 I think. But I can't get it to change. So I can't shut my alarm off when it goes off.

[@omartinajero82]

Do you know how to program all door locks to open on a single button push

[@tracybacani1]

i have 3 squiggles lines on my remote what are they what do they mean? its by or near my tire on the driver side?

[@robertburns3103]

I need to get that manual because my alarm is not working.

[@ThomWalbranA1]

Thank you so much, I have been going crazy trying to get info, please I WOULD like to get a copy of the full installation manual for the R350 alarm system. Also, my little button has fallen inside, has anyone ever opened one of these?

[@julianaarrietty3061]

Hey, thank you your video is very helpful can I get a copy of the programming manual, please.

[@Marlon196]

Hey how do you turn off the auto lock feature off. I locked my keys in my car twice already

[@robertkollie3737]

Hey Tom, I have a 04 rx330 with a remote and security system installed but did not come with the remotes. Can I still use it or do I have to remove the old installation?

[@lorenzoarroz3688]

Thanks so much you saved me fifty bucks

[@FunnYFeetMan]

Really appreciate your video very helpful can i get a copy of the programming manual please.

[@sickwitit1835]

Such a soothing voice. Almost put my ass to sleep lol

[@manuelrivera211]

great job 👍very detailed and easy

[@jp554731]

My remote shorted out. I do not have another original. Is there a way to pair it with the alarm going off?

[@ronaldhemmings2476]

What button were you looking at down by the brake pedal ?

[@wayneroden3384]

Any idea what to do if you program lock first? The car locks and sets the alarm. Unlock is not programmed so the alarm keeps going off and ignition is killed so the car won't start. Can't program any other buttons because alarm is set and can't be turned off. I did this last time and can't remember how I fixed it. The programming guide works perfectly if you do unlock first.

[@MatthewNugentmonty54]

Try pulling I think it's the negative battery terminal for 30 seconds?

[@z71josh41]

Will this work on the non-lcd keyfob the same way? Like, the one that comes with the alarm as a backup?

[@BMaiwada]

HI, please could you help me with setting up the viper with my pontiac GXP 2006? Thanks

[@juanos9712]

is it possible to add a pager to a viper 3105v

[@xamariextilbury]

Did you find out?? I know it’s been 4 years since your comment.

[@dankmullet1983]

Hey thankz man helped me out I was going crazy trying to figure out what my wife did and y the alarm just kept going off lol wrong channel

[@jp554731]

So I found a brain for a viper 3105v. Is there a way to pair it without the original key fob? When I plug it in, II can hear the clicking from the relay clicking the alarm on and off in the alarm brain.

[@centenariodecpt]

Can you send me the instructions please my truck has a remote start abd also has the fuature that my windows close when i lock it

[@tonyramirez383]

thanks a bunch bro . your video helped me out a lot!

[@Farmerchino710]

How do I pair this exact remote to my alarm. it's for my motorcycle and there's no valet button

[@leonidasi2006]

Could I please get a copy of the manual you use in the video?

[@daddydog10029]

Can you walk me or send me the instructions on how to program my viber replacement

[@daddydog10029]

My email is send me the instructions on how to program my viber replacement alarm model 7345v [e-mail]

[@jacobjurado6179]

how do you know what channel it needs to be on

[@acrx72]

Hi there , this help a lot but will this work for the Viper 5305v and if you have that manual for it please :-) thank you

[@clelagooch9577]

can you show me what exactly are you pushing 7 times under the car

[@norrisdyer3269]

Hi this is Norris I did not try to set the alarm as yet and if send me the menul I can set the key less remote I purchased from you.

[@enriqueleon8144]

Thank you! Worked perfectly! Thanks again

[@spinsirjaylaeasley652]

Can that be used to reset the remote

[@xiaolin110]

Can you make a video how the remote works? Because I just got it install. And I don't know how the remote works. Thanks

[@shaneschroth1172]

Can i program a regular key fob to the alarm?

[@stevenjohnson3641]

how can I stop my doors from locking when I put the car on drive

[@peterunger4392]

Hey, can I have a copy of that I want to program a viper 479 and I don't know how pls help.

[@deniromatthias3388]

I'd like to get full instruction manual for the viper 3305

[@ponydown418]

Exactly what I needed... Thanks!

[@KennieGay]

Do you happen to know how to pair a 7652 v

[@clivebishop4809]

would be grateful for a copy... thankyou!