HOW TO PLASTIDIP WHEELS (BURNT COPPER ALLOY)

[@DanielRichards644]

the reason your first base coat came out all splotchy was because it was to COLD, thats how DIP behaves when it's to cold, little tip, when spraying in sub like 50-60 degree fahrenheit weather (which i'm assuming was the case based on the time of day and the date of this upload) you need to keep the cans warm, a trick some people do is keep the cans soaking in a bucket of hot water when not spraying and let them soak for a while before you start spraying.

[@Vas1984]

Also he shouldn't spray with the wheels on the ground. It's an aerosol can designed to be held upright.

[@lessofmewithnsng]

Those wheels look amazing. Perfect color

[@Yakplanet_tv]

That's key. "The way that I want it". Everybody here giving me their opinion on what I should do to it and how I should have it. Until I sat there saying what I wanted on my own car. But still giving me their opinion like I needed to be this way. Nah bruh. I wanted it this way. My car my rims.

[@DRIVENROYALTY]

That edit was so fucking fresh

[@kody3521]

I did this same color on my wheels. Turned out great looking. Almost a year old and still look good with no peeling or bubbles. I did one can of black for each wheel and 3 cans burnt copper between all 4

[@adamclark9253]

Finally someone takes the wheels off, looks nice, good job

[@dirtymoneybuilds7976]

Imagine painting your rims still on your vehicle 😂 might aswell buy the shit you need and do it in the parking lot lmao

[@pacovl46]

Little advice, you need to apply at least 8 coats if you ever want to remove it at some point in more or less one piece. If you like peeling it off in a million little pieces then got for less than 8 coats.

[@acosta88ful]

Looks CLEAN brother great job. Thanks for posting

[@chrisburton-h8c]

Awesome job! They look gorgeous!

[@dennismattson8383]

I want that color on my Meteor Gray 124 Spider's wheels...... BUT.. You're breaking Fonzie's #1 RULE for Wheels.... NEVER EVER spray your wheels lying down like that.. they need to be VERTICAL, or at the most a 45 degree angle.. Spray cans are not designed to spray downward... When you have the wheels lying down, you get a bumpy finish because the paint is sputtering.. You 'll get a much , cleaner, smoother, more powerful spray with the can upright....

[@TheMrJaarli]

That ending was lit! 💯 Good job on the wheels. Looks tight af.

[@cabrera21fc]

I think you got the nicest color I seen of this copper love the darkish look I'm about to do this on my 2014 TCs stock rims

[@anthonycoffey4699]

nice job, love that color. I have a 2013 SS camaro & hated the giant 20" all chrome wheels. did a quickie black plasti dip leaving the lugs & center cap chrome & it's so damn sexy I won't even need to spend $ on aftermarket now!

[@trillrifaxegrindor4411]

guaranteed to look like total shit

[@kurtho722]

i subbed your channel for sneakers and fashion, but i didnt know you were into cars too lol. That's Hella dope!

[@buildhumbly7905]

Kurt Ho haha hell yeah bro. I'm basically gonna mix up everything on this channel. Sneakers, cars, clothes, gym 👍🏼

[@kurtho722]

Dope Si bro. I drive a WRX Hatch haha.

[@buildhumbly7905]

Kurt Ho haha nice! I want to upgrade to a WRX later down the road but the Si will do for now 🙂, an 07 WRX Or STi in pearl white is the dream bro haha

[@tenspeed7711]

looks sick bro got a fa5 2007 red that color would look sick on my rims nice vid man.

[@buildhumbly7905]

Tommy ten speed it hella would! I've seen a bunch of FA5s with copper rims...clean af

[@RuEmileo]

So I came in here to see what color that would look like since I'm thinking about going with it on my Grand Cherokee and I happen to notice yours in the background :D

[@cleyc]

Bro they look fresh!!!! and the Cinematic editing was Sick... cool video

[@godbluffvdgg]

Nice job and good upload...Hope the copper colored rims make you happy.

[@brozejn]

Nice video and amazing color choice. I'd love if there was at least one close up on the final result. So we could see the texture and the sparkling metallic flakes.

[@mfeijo]

Peace bro. Great vid. Love the production at the end. Cinematic shots... Awesome! :)

[@downtherabbitholewithtenne6030]

Right on brother! I'm thinking of doing the centers burnt copper alloy and the lip matte black.

[@mzaversnik2655]

Nice mint and clean honda. Love how the color came out

[@angeloquinit8644]

love the color! wish you could put the link where you bought the burnt alloy color, been looking at amazon but cant find the exact same color.

[@waynejordan7473]

I subscribed just because of your name “build humbly” not too many people like that anymore

[@H3robrineHunt3r]

He should have way more subscribers for the quality of his videos

[@buildhumbly7905]

Tyler Strickland haha thanks man appreciate it

[@djblackarmstrong]

Shits dope my guy, I'm a Subaru guy, but I've chosen to no be a hater when it comes to the Hondas. The color pops major. #NeedNewHaters

[@guppyguy3439]

this song bangs!!!

[@mwats90]

6 years late, but these look mint 👌

[@Gamertoysturbos1]

Hell yes bro looks good what do you use to edit your videos ? Been wanting to do something like that ?

[@ronmraz]

"I live in a (tandem) garage". Damn must be cold at night

[@Natasha831_1]

It looks beautiful! I was thinking about doing that to my 2012 Toyota Yaris SE but I'm not sure. 🤔 thoughts?

[@MiLLz830]

hope u did it

[@lightningfan1980]

Ruby red :p

[@sanju1802]

Buy a new car

[@ur4givn]

Wow! Those wheels look good!

[@PochoNieves]

Totally unrelated... what camera you used to make your video? Specially when you did the cinematic part.Thank you for this video. I been watching whole lot of videos and this is pretty much how I was thinking I am going to do it. I thought using the cards was interesting. The rims look very nice and makes your car 10k look better.

[@activeej8858]

Looks amazing. How's it holding up?

[@enchanterdee8592]

wow it turns out super nice. How many cans of the base and the copper spray did you need for all 4 wheels?

[@davealmeida9786]

Can you send a link of where you bought the burnt copper dip

[@anthonyhuerta4406]

DaveAlmeida DipYourCar.com,about 11$ a can

[@fwhipplee]

Instead of index cards, you can just put tire shine or the dip release from dip your car and it peals right off the tire. Any excess can simply be wiped off with a rag

[@stayfresh1670]

Loving the color it's fire!!!!

[@ArtilleryE]

For the black base coat the index cards are a bad idea. Make sure to not use the index card for that base coat. You need the base black to go over the upper lip which meets the tire if not when you spray the copper on, it will be silver on top of the lip. When you are finished with a full black base coat of at least 6 layers let it dry. Then if you want to add the index cards then do it and copper spray.

[@Lando2095]

Wow love the way the color turned out and nice Si I'm thinking about plastidipping my BMW Stock wheels maybe black but another color would be nice.

[@DavidReyes-vr3sg]

BimmerBoy209 I just did black with no gloss. They turned out great. I Get compliments on them all the time

[@issjakers]

my nigga looking good bruh

[@wvsubaruwrxstiusa8585]

Looks good Bro!

[@jeremyhatch9084]

Turned out good

[@arden4259]

I have a slammed aluminum grey 2014 mazda 3. You think copper would work with 6 spoke 17" rims. Great vid btw from one pinoy to another. keep it up.

[@aldoviera2854]

Yo wtf that’s shit came out clean asf

[@BiltsOne]

Turned out awesome. Looks great. 👍🏽

[@Dicky4567]

Hey man can you give the the product name or a link to the burnt copper alloy paint? thanks

[@israelalcocer69]

Sick color. Great video. What editing software and effect did you use for the video?? Thanks man.

[@buildhumbly7905]

Israel Alcocer thanks man! I use adobe premiere 👍🏼

[@LonelyTigerGrowl]

I like it thanks for this video my black on black looks okay but not to my aquired taste so will do something like this

[@123lilflako]

good job man looks clean keep it up

[@frannduhman2452]

Make sure you warm up the bottles so you get a nice spray

[@veel91]

Looks amazing. How many cooper cans have you used?

[@richardhawj1996]

CLEAN!!!!

[@jimmyvelez4165]

You might have mentioned it, where you get that plasti dip and that same exact color?

[@xInSaAnItYx]

u just gonna act like u haven't made a vid in a year lmao

[@buildhumbly7905]

Haha caught, I'm actually gonna make an update video soon, this channel is definitely gonna go a different direction. Hopefully the subs will care enough to still be subscribed, it's mostly gonna be about my life now lol

[@yayahuik]

You are My idol! Thanks a Lot bro

[@Niner323]

Sick how many cans of alloy you use throughout the whole car?

[@cherrizelmynizzle6446]

Would you recommend this color for a black car?

[@renepunzalan7043]

Nice car and wheel color! I already have black wheels on my car, do I still have to spray the black prime or can I just spray the Burnt Copper on top? Thanks!

[@1000Mahalos]

Thanks for sharing, looks good. How many cans did you use on all four wheels?

[@SSGKeo]

I dipped mine burnt copper on my si too 🔥

[@ariestamaray6171]

Keo Menorath how many burnt copper spray do you need for 4 wheels??

[@RooseveltJeffersonII]

Nice job on the rims.

[@bojiam4818]

Did you dip the wheels on the Jeep too? If not you should, that burnt copper will good on the white Jeep.

[@zacharyoneil9856]

love your video bro.. easy job for plastidip .. so does the plastidip can hold longer? if you wash your rim , do you use water compressor ? or just by hand to clean?

[@saytrillion]

hand clean

[@kenkenny3rd]

Does this plasti deep spray paint good on a long run, I mean on a weather like rain, dusty sunny? I tried a spray paint before on my bike and the paint fade too fast. (like a 3 months):'(

[@AL-ru3nk]

Is burnt copper alloy the same as Burnt Orange Pearlizer?

[@jeremyjoya958]

they look great!

[@michteve222]

What's that original blue you had on there was that blue plasti dip on-top of black? That blue is what I want..

[@gokhancetin9145]

There is a useful blog post about this process. wrxtrade.co.uk/painting-car-rims/ This product is also sold in Amazon. amzn.to/39bKfxu

[@McDzy]

this rims looks like your dream wheels, which are works.. is that correct?

[@aarr3193]

What happens when you get new tires and the shop puts the rims on that rack. Will the plasti dip rub off

[@ZONTESPOV]

Hey are is the burnt copper from plastidip or another brand?

[@britta4528]

did you plasty dip then use paint over top of that so it will still peel off or did you use both colors in plastidip ?

[@MechowTube]

Tried this on my OEM Audi wheels today, what a disaster. my hand is cramped so bad and I splotched the hell out of it and made paint pools with the copper color trying to get more coverage inside the barrel :(

[@VanguardDragon]

You're a really cool guy! Great informative video, thanks!

[@oskarindetodounpoco2675]

you just use black plasti dip and what about the other color is peelable too?? or normal pint?. thank you!! and is nice color

[@beast11135]

I've seen people Plasti Dip with the wheels still on the car, would that be fine as well? They usually put some plastic of some sort covering the rotors and what not, I will use something similar but better.

[@SS-gq2zp]

looks great!!!

[@julesgrill2490]

This is the color 'blend' between; copper / brass monkey, I've been looking to achieve. Thank you! Immediately updated.. Nvrmnd, It's not the color-in-a-can i am looking for, You just did a kick-a** job with your coat ratio application's (or it's just something special in that CA air) lol

[@Reviewcomic1]

bro is that a high altitude grand cherokee in the backround i see????

[@instacortez.cabral1133]

Is there a reason on why mine turned out nothing like yours did??

[@mannyi]

Awesome color cool video

[@Dixon_Cider]

Shout-out Fonzy!!! 😂

[@raymundovaldez9109]

Carnal se mira chingón! saludos

[@enriquesamano5219]

Do you think I'll make it with 2 cans of the burnt copper or should I go for 3?

[@buildhumbly7905]

Enrique Samano 3 just to be safe!

[@LeaderOfCanada]

Enrique Samano buy 3 or 4 to be safe, u can always return one after if you don't use it

[@tigerbalm666]

Dam, those look like expensive exotic rims coasting $2k+

[@emmaleebunch8124]

This was an awesome video thanks!

[@jessehovanec1642]

Nice color but it came out bumpy because you layed the wheels down and sprayed, even fonzi said keep the wheels upright or atleast at a 45 degree angle lol

[@wpgcelica]

I always wondered with plasti dip, for example you must have masked your center cap, how do you remove the masking tape without pealing the plasti dip?

[@Pinoycwoker]

Remove your center cap.

[@TomoReso]

could you give color code please? i love the looks of it.

[@Spartan117A51]

Is the metallizer also kinda like a clear coat do I want to clear coat these?

[@monkeymanx310]

i have 20" wheels but i wanna do the inside as well not just the front do you think 3 cans of copper will be enough? also how well does it hold the look as far as chips or peeling ?

[@buildhumbly7905]

Prep is key, definitely do more coats with the black base coat because i rushed 2 wheels so they peeled :( I peeled all of them off and in terms of your 20", i would do 5 cans of copper alloy, just to be on the safer side!

[@yunusmlakumlaku]

how longtime from spray black to burn copper alloy?

[@marcinka5865]

What exact colour did you use? could you provide link to that can?

[@davealmeida9786]

Oh and how many cans did you use? Thanks

[@M5xThully]

How well does this hold up over time?

[@SladesVWBeetle]

What about tightening your lug nuts up against rubber, instead of the rim itself? Seems like a bad idea.

[@Iamdesignproducts]

Can't wait to do this color on the stock rims of my world rally blue BRZ mmmm

[@moonbear1st]

love the colour the only issue for me is plastidip it soon tears up at the slightest touch,still hope it stays cool for you bud..

[@Iamdesignproducts]

moonbear plastidip sells a protective uv coating that works wonders! Adds gloss too

[@moonbear1st]

cheers bud

[@dennismattson8383]

Proper PREP, and at least 8 coats.. and it is Super Durable... I've only seen it tear up when people go CHEAP with not enough coats..

[@pacheco464]

Bronce burn color it’s plasti dip too?