How to polish a Peterbilt Grill.

Tyrese aka Darrel from Evan's detailing and polishing shows how simple polishing a peterbilt grill can be with the right process. Keep in mind this is only the third time he has polished a grill and he is killing it. I've watched this young man grow a lot over the past few months and his buffer control is growing everyday. I truly hope these videos are helping you learn how to properly polish metal. Be careful and stay safe.
Of course everything we use in our shop is available for purchase in our shop and on our website. goshineon.com/shop
All of these products use in this video are available at www.amazon.com... or by the individual links.
Makita ga7021 amzn.to/2RPDBoo
6,000 rpm

Dewalt D28499X amzn.to/2JZqw9j
6,000 rpm

Makita 9927c amzn.to/2TaKL8n
3500 rpm variable speed

Dewalt dwp849x amzn.to/2qIZ7j9
3500 rpm variable speed
Green electric pressure washer. amzn.to/2JAeJz9


White cotton towel options

12 x 14 (100 pack) amzn.to/2SHAm3r

12x 12 (24 pack) amzn.to/2C5evLU




Makita 5" da or random orbit

hook and loop amzn.to/2SxCY3r
15 mm orbital amzn.to/2VWSM2l
Porter Cable. amzn.to/31saU5d


Extension cords

100' 10 gauge amzn.to/2Sqclko

50' 10 gauge tri tap amzn.to/2t6PHPJ

100' 12 ga amzn.to/2GgOFJJ

50' 12 ga amzn.to/2TA5nXs

20 ton jack. amzn.to/3343V4i
20 ton air jack. amzn.to/2qSNTvJ
20 ton stubby jack for low axles. amzn.to/2PzRc5e
20 ton stubby air jack for low axles. amzn.to/2JA9ShK
Under new law I have to proclaim these links are associate links and I get paid for the sales of these products.

[@keatongiza2798]

Great work enjoy seeing credit given to someone like ty that may not get recognition for there hard work. Keep it up guys

[@EvanStegerMetalPolishing]

He’s come a long way whole working for us. He’s really getting good.

[@chasyncribb]

@@EvanStegerMetalPolishing how long has Ty been with you guys?

[@peterrocco2888]

Love to see a young kid with ambition. Stick with learning Darrel and you can be anything you want.

[@EvanStegerMetalPolishing]

Truth

[@geriatricginger]

Tyrese just took over the show! GG!

[@EvanStegerMetalPolishing]

He was good at what he did.

[@joeehrlich2898]

Yes!! I hope I can get as good of results. I realize Ty or AKA beginner to edge of Master Apprentice has skills in a short period of time. I hope that I can be so lucky!! Thanks for sharing and for all the hours it takes to make one of these videos!! I love that you dint exit out Ty on his own after you went to the office with clients!! That means you trust your employees to have the knowledge to get it done right. Thank you!! Whooped it Ty!!!

[@EvanStegerMetalPolishing]

He is definitely talented for sure.

[@chasyncribb]

@@EvanStegerMetalPolishing keep up the good work.

[@timwestendorf8303]

This is awesome! No one remotely close to me polishes anything beside rims! This is so helpful! Gonna do ot myself

[@EvanStegerMetalPolishing]

Thanks for watching. Glad you enjoy the video.

[@phillipstorey7901]

I’ve learned some much watching ur videos. I’ve also watched every video u have put out. I’m doing some polishing here in Nashville Tn. I still have lots to learn.

[@EvanStegerMetalPolishing]

That’s awesome. Thanks for watching.

[@fastrich75]

Awesome. Iv been watching a lot of your videos Iv learned a lot. Trying to get have as good as that young man. !!

[@EvanStegerMetalPolishing]

Glad to hear it. You'll do great. Thanks for watching.

[@nateheiderscheit8337]

No problem I enjoy watching and hope to be good at it like you guys someday

[@EvanStegerMetalPolishing]

I'm glad you like the videos. Truly appreciate you watching.

[@marklacombe2671]

He did a awesome job.

[@EvanStegerMetalPolishing]

He sure did. Thank you.

[@iKevin_22]

Stay Smooth Ty! Loved the video!

[@EvanStegerMetalPolishing]

You too! Thanks for watching.

[@diddybuilt8330]

Good job Todd 👍🏾

[@EvanStegerMetalPolishing]

Ty’s a great kid. I’m grateful for the lol guy.

[@delanowilliamson5529]

Doing good he got it better than when I started

[@EvanStegerMetalPolishing]

He's learned a lot and come a long way. Grateful to have this kid with me.

[@delanowilliamson5529]

@@EvanStegerMetalPolishing true I can see

[@bjleis809]

This is awesome! Killer job ty! You have a good teacher.

[@EvanStegerMetalPolishing]

He's come a long way for sure.

[@brucebonkowski9568]

How do you clean and polish a 1980 autocar constuctor has never been cleaned for 30yrs been in a coal mine is it looks like a old soda can he on a budget

[@kylpen1126]

Looks amazing Ty. Love these vids. Nice work guys!

[@EvanStegerMetalPolishing]

Glad you like them! Thanks for watching.

[@MNpicker]

Good stuff Ty!! Awesome shine bud👍🏼👍🏼😎

[@EvanStegerMetalPolishing]

Thanks for watching. I'm super proud of him.

[@gbusiness104]

Good job. I just got into polishing and it’s awesome!

[@EvanStegerMetalPolishing]

Good to hear!

[@devin1989100]

Great video as usual .

[@EvanStegerMetalPolishing]

Thank you. Ty is a great kid and learned a lot.

[@alexluna7384]

Good job

[@EvanStegerMetalPolishing]

Thank you for watching.

[@danielkinder2542]

Slime did a great job!!

[@EvanStegerMetalPolishing]

agreed!

[@custerfarmschippewavalleygrain]

Ty did a awesome job till him to keep it up and you too

[@EvanStegerMetalPolishing]

I will. Thank you bud for all the support.

[@jakecday]

I was hoping for a video that would show off the 40 ply domet...I think I need to buy it now lol good job Ty!

[@EvanStegerMetalPolishing]

Ty has grown so much. I'm so proud of him. Thanks for watching.

[@omarleal3746]

kid a natural!!

[@EvanStegerMetalPolishing]

He sure was.

[@MrTurbobuick]

Love the videos!! Great job!! I believe watched every video that you’ve put out. Can you make one on how to polish the rails of a trailer with the chicken lights installed? Thanks

[@EvanStegerMetalPolishing]

Take the lights out. You’ll be happier if you do.

[@bjlo4life]

Where can I buy the “loose white” wheel he used to buff out the hand polish?

[@EvanStegerMetalPolishing]

goshineon.com

[@ryanretzlaff2210]

So for the grille can u just use the orange and brown and yellow and green or do u have to do it the way u guys did it

[@EvanStegerMetalPolishing]

You can do it however you want. Our videos aren’t guidelines. They are videos of how we do it. Many do it differently. And that’s ok too.

[@ratrod3598]

The goat thanks for the info.

[@EvanStegerMetalPolishing]

Glad to help.

[@kennylaporte4382]

Great job

[@EvanStegerMetalPolishing]

Thank you!

[@tillerjets]

I don’t know if I’ve ever seen you use a rake on your cut buffs?

[@EvanStegerMetalPolishing]

I never rake my cut buffs.

[@bulrack66]

Great job Ty!

[@EvanStegerMetalPolishing]

So proud of this kid.

[@ramiroayala8553]

What brush or pad is that

[@EvanStegerMetalPolishing]

goshineon.com 2 step aluminum kit

[@marktaylor6952]

Hey Evan, I'm.wondering about this I have an 2011 honda odyssey aluminum wheel I'm sanding faulty clearcoat down to 600 grit and polish with mothers polish and then clearcoat 5 coats to offer protection so raw aluminum is not in the air. I'd rather leave the polished surface but presume it will oxidize quicker with no protection. So I clearcoat and the shine then comes from the clearcoat vs all that nice polishing. What do you think am I doing the right thing?

[@EvanStegerMetalPolishing]

Most clear coats won't stick over proper polis. You'll also need more than mother's polish over 600 grit. Mother's isn't very abrasive.

[@elipete211]

Good job!

[@EvanStegerMetalPolishing]

Thank you for watching.

[@nateheiderscheit8337]

Was that a 3 or 6 thousand rpm grinder?

[@EvanStegerMetalPolishing]

For cut we use a 6,000 rpm grinder and for finish polish we use a 3500 rpm buffer. Thanks for watching.

[@samuelwilloughby8987]

Where can I get a loose white buff?

[@EvanStegerMetalPolishing]

www.goshineon.com

[@turkfebruary5836]

Was any sanding done on the grill before hand?

[@EvanStegerMetalPolishing]

Not on this particular video. We avoid sanding as much as possible.

[@turkfebruary5836]

@@EvanStegerMetalPolishing man I wish I knew what I’m doing wrong. I’ve tried sanding first and without sanding and I just don’t get good results. I put hours and hours into polishing my truck and the fuel tanks came out ok but the grille looks basically like I never touched it. Y’all make it look so easy on KZbin.

[@grapestreetcrip6124]

Is it brown green and last white?

[@EvanStegerMetalPolishing]

We finish with green compound

[@wilkoifs]

Thanks for sharing

[@EvanStegerMetalPolishing]

My pleasure, thank you for watching.

[@TheFailure17]

Do you modify your triggers so they dont lock?

[@EvanStegerMetalPolishing]

We only remove the safety start tab. The lock feature is still enable able but we just don't use the lock in our shop very often. We do have a video on how to remove the safety start tab though if you need it.

[@daniellugaro445]

I see orange wheel , brown polish?

[@EvanStegerMetalPolishing]

Yes most of what we do is orange with brown first.

[@anatoliyhuhalo1600]

Cool guys

[@EvanStegerMetalPolishing]

Thanks for watching.

[@autorecondetailing4294]

Love the videos. I've been doing alot of metal polishing myself lately but the one question I have is that I see alot of you guys using 6000rpms instead of the 3500 variable speed. What flanges are you using because the zephyr one is only rated to 3500???

[@EvanStegerMetalPolishing]

goshineon.com/shop we sell the all aluminum insertable safety flanges that are rated for higher speed. Thanks for watching.

[@autorecondetailing4294]

@@EvanStegerMetalPolishing gotcha thank you sir

[@iamtruckedup]

Great job Ty thanks

[@EvanStegerMetalPolishing]

Thanks for watching.

[@custerfarmschippewavalleygrain]

DETAILING AND POLISHING GUY

[@EvanStegerMetalPolishing]

Hello!

[@geronimo55kj]

Awesome job only could keep getting better

[@EvanStegerMetalPolishing]

He was killing it. Too bad he quit. He was a great asset.

[@geronimo55kj]

@@EvanStegerMetalPolishing good help is hard to find these days ....hope he had good reasons?!

[@EvanStegerMetalPolishing]

@@geronimo55kj I wish it was a good reason but you are right. Good help is very hard to find. Especially in this industry.

[@davidmartins4666]

Can I call him Ty the new polish guy?

[@EvanStegerMetalPolishing]

You sure can. I'm hoping to involve him and many other polishers into this series of videos.

[@matthewpolishing7294]

Where did ty go

[@EvanStegerMetalPolishing]

He is in the area living life. Thanks for watching.

[@SlickD217]

Love seeing young dudes excited to get dirty and earn that money $$$

[@EvanStegerMetalPolishing]

I agree. Thanks for watching.

[@codycuster6222]

This is how to polish a grill with ty

[@EvanStegerMetalPolishing]

Thanks bud.

[@mustangtravis84]

I was gonna hit the like button, but its at 379 and thought 379 grill 379 likes, I'm not gonna be that guy. Great video though

[@EvanStegerMetalPolishing]

Thank you for watching and commenting!

[@ericmerchant3646]

Shimmy shimmy shimmy, blah blah blah. No disrespect Ty, but you polished that grill twice already and it’s not very shiny until this time. Makes me question your mentor. Shimmy shimmy shimmy, blah blah blah. Say, what’s that red goo behind you? Shimmy shimmy shimmy, blah blah blah. 🎵🎶Don’t push to hard or you will leave scratches. Shimmy shimmy shimmy, blah blah blah.🎵🎶Chunky and blah blah blah

[@EvanStegerMetalPolishing]

Lmmfao not sure what that stuff was.