how to port forward in airtel's gx titanium 2122A router | New firmware

[@deezlad]

Thanks a tonne! I was messing with Security -> Port Filter without any luck.

[@abethetechie]

Thank you for your comments and support . You can try DMZ first for checking the port forwarding . If it is working , you can try port forwarding .

[@manoj-bm4sx]

Hi sir, I like to add my harddisk connect to the usb port and like to use it as FTP server. Can you say what are the configuration need to be done in router configuration.

[@abethetechie]

Thank you for your comments and support🙏. Some firmware it will support. For internally I have tested the ftp working after connecting flash drives in router. From out side I have not tested. I hope I can update a video about that.

[@manoj-bm4sx]

@abethetechie thanks for your comment. Kindly make a video soon to connect internally and from outside possibility soon for titanium 2122A.

[@abethetechie]

Sure bro. Thank you for your suggestion to improve.

[@ravikumarjain982]

sir please suggest how can we create VPN Setting in this rounter and thank you for this video this video is too much helpfull for me.

[@abethetechie]

Thank you for your comments and support🙏. I will try to do it, In my firmware it is not showing . If it available any other firmware i will do it .Thank for new idea .

[@SmilingBuddha31]

Does changing dmz Or doing port forwarding affect network?

[@abethetechie]

Thank you for your comments and support🙏. It will not impact local network. But it will stop any external access of the server's.

[@anjahw]

Do we also need static IP from airtel to do it?

[@abethetechie]

Thank you for your comments and support🙏. For portfowding we required public ip.staic is not mandatory. Instead we can use ddns.

[@YoKER__11]

port forwarding not working for me when setting it up for minecraft....

[@abethetechie]

Thank you for your comments and support . Please make sure your want interface IP and Show my ip of the web browser is showing same ip address . If it is so remove the port forwarding and put it in DMZ only for verification .

[@YoKER__11]

@@abethetechie can you please elaborate, because I didnt understand a single thing Thank you

[@abethetechie]

First we need to verify you are having public ip for that below method you can verify. Open any web browser type show my public ip, here you can see the public ip. Then login the router you can see wanna status you can see the ip both should be same. Else you don't have public ip. If the above satisfied. Then remove all portfowding then configure the dmz with your server ip. If it is working may the portfowding has to check what all are port is missing. Don't put any public ip information in comments.