How-To Power Recliner Repair

Has your Power recliner stopped working? In this video, we demonstrate how a power recliner works and how to diagnose some of its basic power functions. Please let me know if you have any questions! I'm listing basic parts below, but always double check before ordering the more expensive ones!
power recliner parts -
power transformer/inverter - amzn.to/3oqPUYk
two button power switch - amzn.to/3psITYl
two button with USB power switch - amzn.to/3iWhlrA
motor - amzn.to/39qajbu
outlet tester - amzn.to/3otIhjy
power surge protector - amzn.to/2YmwdWL

[@1961Vicki]

Thank you for doing this. I don't have anyone here to help me and I followed your video and was able to get recliner to work. I knew everything was plugged in and was getting power but it was unplugging and plugging the switch back in that did the trick. I never would have known to try that. Thank you.

[@the323vlog4]

Thank you so much for watching! We really appreciate the feedback

[@donnawood7944]

Last night I was unable to put the recliner in my sofa back down. I know it is going to take at least a couple of weeks (if not longer) to get a repair technician here. I also doubt they will have the replacement switch in stock, so we are probably looking at a couple of months before the chair is functional. Your video calmly walked us through detaching the rails so we could at least collapse the recliner. I also used your link to purchase a switch and hope to be able to use it until the new switch comes in. We really appreciate your video AND your expertise! Thanks for doing what you do.

[@the323vlog4]

So glad it was helpful! Thanks for watching and good luck with the repair !

[@hungryhungryhenry1714]

Thank you, we were able to trouble shoot our own problem and fix it because of this video. Greatly appreciated!!!! Thank you again

[@the323vlog4]

Hungry Hungry Henry I am very glad to hear it! That’s what we are here for.

[@jimv1484]

You got me back in chill mode! Thank you! Hey KZbin.....pay this man! My recliner just stopped working but it was in the down position. I had zero action at the switch......a green light on the power supply....and everything was plugged in. I just assume that it is the switch and might just order one to give it a shot. But the real help way you mentioning how to release the frame from the mechanism. Once I removed the bolts my chair is on the move again. It now reclines even further and I really dont need the power option. A huge thank you to you sir!!

[@the323vlog4]

Glad it helped you!!

[@Ratlegion]

Thank you. Ended up being the connector from the transformer to the dual wiring that ran to the motors had become loose. Everything is working fine now. I'll get the surge protectors before the next storm, just in case. God bless you.

[@the323vlog4]

Awesome! Thanks for watching

[@SreHarshaRemella]

This video helped me isolate the problem to the control panel, and then I found a small button on the control panel (while taking it off) which was turning the recliner function on or off. Thank you!

[@the323vlog4]

Thanks for watching! I’m very glad it helped you

[@jno2004]

So happy I found this. It worked for me. I had forgotten that quickly how to reset it after the guy was just out here. Thank you!

[@the323vlog4]

So happy it helped!

[@KelliJ_]

This is so awesome I had a repairman come and paid him $300 last time it happened and this time I don’t need to do that thank you! ❤

[@the323vlog4]

Glad it helped! Thanks for watching .

[@TimISawake]

I inherited a lazyboy with a bad power supply. Watching you video to learn how to diagnose the problem, and I saw this video was uploaded St. Patrick's day 2020. The day Pandemic laid me off from the job I loved and was Employee of the month for. The world works in mysterious ways.

[@the323vlog4]

Interesting. Well, hope it helped. Thanks for watching

[@muralibala9700]

Great explanation especially the sequence of trouble shooting. Thanks, it worked for me.

[@the323vlog4]

I’m very happy it worked for you! Let me know if there’s anything else y’all need, thanks

[@SimonSaintPeter]

HEY BOON LIGHT, THANKS FOR THE HELP. I WAS ABLE TO OPEN MY RECLINER BY UNLOCKING THOSE 4 SCREWS UNDER THE CHAIR.YEAH!!!!!🤗

[@the323vlog4]

Very glad to hear that

[@tjtampa214]

Thank you, I was very interested in the basics on these things. 🌷

[@the323vlog4]

Thanks for watching ! Hope it helped!

[@VampireGUK]

The only video I could find to explain how to get the damn thing to collapse if the motor fails. Thank you.

[@the323vlog4]

No problem! Glad it was helpful

[@shanesamarakkody8856]

I bought modular sofa with power recliners and just came here to see what potential issues would be eventually :). Really good video. Didnt know these existed in KZbin. Thumbs up for the good work..!!

[@the323vlog4]

Shane Samarakkody thanks for watching!

[@stephenlokey6711]

excellent presentation........spoke slowly enought to understand, obviously knew his stuff, will try everything he suggesed

[@the323vlog4]

Stephen Lokey thanks for watching!

[@swordofomens5202]

Great video and explanation, thanks. I've got a rising recliner, and the mechanism looks near identical to that shown in this video. It raises and returns to a seating position without any issues. But when trying to recline, the footrest will start to lift, but then stop and the motor can be heard humming/struggling while the button remains pressed. Pressing the other button, it pulls the foot rest back in fine and raises the chair without issue. It's quite random how far the foot rest lifts before it seemingly gets stuck, and applying continuous backwards pressure to the back of the chair will allow it to continue to recline. My initial thought was that something must be causing resistance to the mechanism. To the extent that the motor cannot push the footrest up. But I cannot see anything that would be causing this, and would assume that such resistance would have to be quite high. Given the motor is still able to lift a person when rising. I've tried all the usual things with the wire connections, outlet, transformer, etc... But am yet to find a fix or even a cause. Any ideas would be appreciated 👍

[@the323vlog4]

my thought is that it is the motor. A lot of the times there is a thread rotating in there and it may be jammed. That’s my guess, but hard to diagnose without seeing it

[@swordofomens5202]

@@the323vlog4 thanks for the reply/suggestion. Being a total novice, I just assumed the motor must be fine because it's able to raise and lower the chair no problem. But has the aforementioned issue only when engaging the mechanism that lifts the footrest. It certainly can't hurt to strip it down and have a look. And a new motor is definitely cheaper than a new chair. Thanks again for trying to help out 👍

[@blackgown7485]

Hiya Did your solution work? I'm having the same issue. Also my power box keeping flashing green

[@swordofomens5202]

@@blackgown7485 I found a cheap replacement motor on eBay. Has worded fine since. 👍

[@evanofelipe]

Thanks for your elimination approach to identify possible defective components. My recliner simply stopped working when partly reclined. Effectively the rise button did not work, whereas the recline button was OK. The motor would continue to run to extend, but the rise button did not reverse the motor to retract and that indicated to me that the motor was actually OK, until it fully extended. Then it stopped completely. I checked out all of YT’s recliner troubleshoot and ‘fix it’ vlogs and non were able to identify my problem. What they all failed to mention was that within the actuator arm, attached to the motor housing, there are two micro switches that enable the DC current to reverse its polarity and run the motor backwards. By disassembling the actuator arm from the drive motor I was able to reveal the switches, positioned one at each end of the ‘throw’. I was able to see that the start micro switch had jammed itself in the ‘open position’ rendering the retract button inactive. When the linear actuator had reached its full extent the other micro switch is deactivated to stop over running the motor. So to fix this problem it’s first necessary to ensure that both micro switches are cleaned and free to operate properly Ie. switch on and off and then manually rewind the actuator screw back to the start position. In my case I wiped any loose debris from the micro switch buttons and cleaned the traveller, attached to the screw and could hear them click open and close and carefully re-assembled the actuator arm to the motor housing. I suggest photographing the mechanism during the strip process to ensure correct re-assembly, as it’s critical to align the traveller and wiring spacer inside the actuator housing. Also note position and length of the screws holding motor housing together. My problem was solved simply by freeing up a very small micro switch that had jammed open and saved me waiting for £120+ replacement motor and carriage costs from China. Hope my investigation helps someone else with the same symptoms. I’m now trying to source replacement micro switches from Changzhou Kaidi Electrical Company in China. They are relatively inexpensive components used to control the polarity of DC current of the motor making it extend and retract the reclining mechanism, whereas the full motor and linear actuator can be an expensive and time lengthy replacement, dependant upon on type and make.

[@the323vlog4]

Thank you for your experience and expertise in the matter! I’m sure it will be helpful to several folks.

[@ideapowerfulweapon]

I think that's my problem. Occasionally my footrest won't go up but it will always go down.

[@evanofelipe]

@@ideapowerfulweapon It’s easily fixed, but involves dismantling the lifting arm and cleaning the micro contact switches

[@kcorpora1]

​@@the323vlog4sir where do you get parts for the chair. The motor part of my chair is attached to a bar by plastic and it broke so the motor has nothing to hold. Any help I would appreciate.

[@the323vlog4]

@kcorpora1 that will be a part of the motor itself. I’d check with the store where it was purchased first. If no luck there, I’d look up the model of the motor on eBay or online in general and see what pops up. I used to get a few parts from recliner-handles.com

[@davidpyles7307]

There was a button on the cable between the power converter and the motor. It had a light with it. Somehow that got turned off, and it was not very visible. I could see 29V at the power converter box, but not at the end of the cable. Once the button was pushed, the light by it went on, I now had 29V at the end of the cable, and all worked again. Thank you!

[@the323vlog4]

Thanks for sharing! I have not worked on one with that option before. That is good to know

[@stephengordon8968]

Thanks way better than all the others I've watched !

[@the323vlog4]

Thanks for watching !

[@theaccountcreated8962]

Very good info! My couch just suddenly stopped on one side last night

[@the323vlog4]

TheAccountCreated Glad to hear it! Let me know if you’re able to fix it

[@kevinnelson8418]

Great video! I learned a lot and I will try to fix my recliner.

[@the323vlog4]

Great! Good luck!

[@jasonlevin6613]

Thanks for the video! My recliner started making a grinding sound when it goes up and down. Any suggestions?

[@the323vlog4]

Unfortunately that’s usually an indication the mechanism is bent and catching on itself. It will more than likely need a new mechanism . I usually try to call the place where the recliner was purchased to see if they can order a new one.

[@albertsegura6034]

My cable split bc it got stuck as the recliner was going down like you mentioned. Are all the cables usually the same?

[@the323vlog4]

Yes, typically the wires are easy to order and very common. The one I see get caught the most is typically the power cord that runs from the wall to the power transformer box. Good luck

[@josequiroz8009]

Great information, thanks for the help.

[@the323vlog4]

You’re very welcome, thanks for watching

[@Grimtheorist]

Thank you so much, this was super helpful!

[@the323vlog4]

My pleasure! Thanks for watching!

[@Nate__River]

Hi, quick question Could a manual recliner type be converted to an electrical like the one on this video? The idea just popped into my head that maybe it was just a matter of installing a motor, but not sure if that's possible. Thank you

[@the323vlog4]

Nate River it’s possible, but would probably be difficult to do. Parts that J can think of off the top of my head that would be necessary are the motor, the frame parts to mount the motor. Hikes would have to be drilled in the square tube that runs through the center. You probably have to drill holes in the frame to mount the motor to the metal base as well. You’d have to have find someone very experienced and then locate the parts as well. It would be very tricky in my opinion

[@nanosaucedo8204]

El mejor video sobre el tema gracias

[@gabelinke3557]

Great video! I can see where the rear frame caught the back of the motor track where the wires go into the motor. I have repaired the wires and it works but it lightly touches the area with no one on the couch. (End of a sectional) if someone sits on it the frame hits this hard and will pul the wires apart. It seems as if the chair is sagging too low. Any ideas on how to adjust it up away from the motor?

[@the323vlog4]

There should be four bolts that connect the mechanism frame to a separate metal frame that connects all the pieces together. I used to shim it up using washers between those two metal frame pieces. Sometimes a larger bolt was necessary

[@imrulhasan3673]

After watching this video, I was able to fix my sofa. Thanks a lot.

[@the323vlog4]

Imrul Hasan very glad to hear that! Thanks for watching

[@dumarobroot]

Thank you for your excellent video!!!

[@the323vlog4]

Thx for watching!

[@ilenegutierrez3959]

HI, My issue is a bit different, it goes down but the UP switch no longer is green and the chair won't rise. I will probably disengage it like you demonstrated, so that it is up for sitting in.

[@the323vlog4]

ilene gutierrez I would be willing to bet that it’s just a faulty switch. Luckily, those are very easy to switch out. I have another video on how to replace the power switches.

[@amber7806]

Hello. Thank you for your video. The motor mechanism is scraping against the frame causing a clicking noise when my chair reclines and returns to the upright position. How can I adjust the chair to correct this?

[@the323vlog4]

I have had success adding a few washers between the mechanism and the metal frame that attaches to. It should be several bolts attaching the mechanism to the metal frame and I usually add some washers in between the two to raise the mechanism up just slightly. If the mechanism is bending in word catching on itself, sometimes I use a 2 pound hammer to straighten it out

[@aprillassiter3766]

Hey there. I have a power lift recliner and the footrest will not go down. All other functions work as far as reclining and the lifting mechanism. Any suggestions on how to fix this? Much thanks!

[@the323vlog4]

It’s hard to say without seeing it, but I would try a few things. One, if there’s an individual motor that controls that function, it has more than likely gone bad or has a loose wire connection. I’d always recommend tracing all wires and get a good idea of how everything is controlled and it will help you diagnose it. For instance, I see a lot of power recliners where the power goes into the chair and plugs into a power transformer box and then from there another wire goes to power the main lift arm motor, and from that one motor, it splits into three or so wires that can control the headrest, the power switch, etc. if you send images of the chair and motors to my email at [e-mail] I can try to help you further.

[@tomb4525]

Awesome video, very helpful ordered something parts and hoping to fix my daughters sofa!

[@the323vlog4]

Best of luck!

[@mizkcreations]

Hi. This is great when you can actually see where all the cords go when it is stripped clean like you have. When the upholstery is on its difficult to know how to access transformer box or anything else. Could you show a power recliner where you've tilted it forward but you are having to use a flashlight in nooks and crannies (Cabo from Value City). Thanks.

[@the323vlog4]

I will do my best to find a power recliner or next time I have a customer job, I’ll film it, thanks!

[@mizkcreations]

Thank you! Your work is appreciated!

[@the323vlog4]

@@mizkcreations my pleasure! Thanks for watching!

[@EJR20]

I looked up for a replacement motor, and I seem to find one that is 28V and the transformer box produces 29V would that be a problem? In general; these are the specs of the stock (dead) one; Max.load:1000N, Stroke:333mm, Rated Voltage:DC 29V. And the new one that I’m about to get, the specs are; Max.load:800N, Stroke:340mm, Input:DC 28V 2.0A. How do all these correlate, and would it be a good fit for it?

[@the323vlog4]

I wish I could help you with that question, but honestly, I’m not experienced In the electrical side of things. I will tell you I’ve never had an issue swapping out the transformers, switches or motors even if they were different specs. I would reach out to an electrician and see if they’d be able to provide a little more insight on that specific question though. Thanks!

[@casasofiacancunairbnbrenta8475]

Thank YOU so much for sharing your knowledge!! I hope you can help me out here, i have a simple recliner that worked perfect until it didnt some day. When i push the up or down button on the switch the motor works very slowly like in little steps of 1 cm each time then it stops for 3 seconds and another cm. What could it be? When i push the switch, the green light on the power supply box fades to weak but does not go out entirely. Bad power supply? Thanks in advance.. Best regards

[@the323vlog4]

I’d start by making sure no wiring was damaged, then trouble shoot the switch, transformer and finally the motor.

[@jamjys]

Hi Will these switch/controllers work with massage couches, (up/down) it has a 8pin din 3 core cable , Is there a standard pin out wiring diagram? Trying to replace/repair a controller. Thanks

[@the323vlog4]

Thanks for watching and for Your question. Wound you be able to send me some pictures of what you’ve got to my email at [e-mail]? Thanks

[@wjkell]

Thanks for a clear and easy to follow video

[@the323vlog4]

My pleasure! Thanks for watching

[@r.jsmith8979]

Hi, I have an RMT Ramacro motor, model R811A on my recliner. There is a piece on the motor with 4 screws holding it on. This piece connects to a round bar with a pin that can be pulled out. The part coming from the motor has 2 plastic, round disc's that shattered. it did not hold the weight of the person. Do they make a reinforced metal part? Tough to describe, so I hope it wasn't too confusing..

[@the323vlog4]

It might help if you send us some pictures of it. Our email is [e-mail]

[@Hydrophish]

Great video sir, thank you for posting this!

[@the323vlog4]

Glad you enjoyed it!

[@luisrivas1891]

Thanks for showing us this. I have a question. My sectional recliner has a 2 button switch. One button reclines and the other one is for the power head rest movement. Last night the head rest failed in the up position. I checked everything and there is power and everything. I even took the switch apart hoping that it would be a fuse. Any thoughts on this? How could I check if the motor has failed? Thanks in advance.

[@the323vlog4]

I have never successfully found a way to test the motor for individual function I suppose if you are handy with electrical, you could uncover the wires and push the headrest button on the switch and test if the power is going to the motor with a multimeter. A cheaper and easier option in my opinion is to order a new two button power switch and test it out to see if that resolves the issue. If that does not solve the issue, then it sounds like you have a motor issue. It’s probably goes without saying, but I will definitely make sure the wire did not come loose that runs into the headrest motor

[@luisrivas1891]

@@the323vlog4 I appreciate your response! I can try with a new switch and go from there! Thanks!

[@EcoBeast-ip3ky]

@@luisrivas1891 if theres a 2 button switch on both ends of the couch, just use the working switch on the other side and if it works then u need a new switch for other side

[@jameslavine4877]

Thanks so much. This was very helpful.

[@the323vlog4]

I am very glad to hear that! Thanks for watching!

[@terris1805]

My power recliner is only 1-1/2 yrs old. When I use the hand control it was sometimes not responding, wait a bit then it did work. But now it only lifts the footrest up and down; if I try to recline the back it stops working. We’ve put the chair on its side, unplugged then replugged the hand controller to get the chair closed and we can see the motor seems to stop at the same location every time, 3/4 of the way back on the rail. We checked power supply, wires and connectors all look good. What should I replace hand controller or motor.

[@the323vlog4]

I typically have a spare hand Controller that o always try first , because it’s usually the issue 90% of the time, but it is definitely possible for the motor to have issues as well. I would definitely start with the hand control though. If you have another power recliner in the home, you could potentially borrow the hand control to help diagnose the issue.

[@ruberoz27]

Hi. I have a 3 switch power recliner, 1 for the headrest, 2 for the legs, and the 3rd switch puts both parts into its original position. The leg rest was in an upright position and someone forced its closure (assuming this person thought it was a typical manual recliner). Now the leg rest is closed and will not open when the button is pressed. The other button for the headrest works just fine. Any advice for that? Greatly appreciate it.

[@the323vlog4]

I suppose it could be a few things. When pushing the button for the footrest, can you hear the motor working? I would try to operate it while inspecting the mechanism area and see if anything is moving. I would also inspect the mechanism and see if it was damaged on the process of the forcing shut. Hole this helps get you started

[@keggagrenier8474]

I’m having a clicking sound only when its going down from the recline position. Any help would be greatly appreciated.

[@the323vlog4]

Kegga Grenier I’m familiar with a couple of sounds that fit that description. First, the motor could be faulty and be making the sound, which could possibly be remedied by cleaning it or replacing it if necessary. Second, if it feels like it’s catching or jolting, it could be a be t mechanism and the frame could be catching on itself. If you’re able To send me a video of the noise I could maybe help further. You could send it to [e-mail]

[@angelonatoli9449]

I have two berkline recliners which are 10 + years old. They were rarely used until I moved. One works and has a power control box, the other chair has a smaller control box without a plug cord. I vaguely remember connecting the chair with the larger box which has a plug in chord to the recliner that is not functioning. Could this be possible, or do I need another power box with a plug in chord.

[@the323vlog4]

The power transformers are usually interchangeable, but for the price I would recommend getting one decorated for each, making sure it supplies enough power to handle the motor for that specific unit. The motors typically say on them how much power they draw. From there, just look at the specs on the transformers and make sure it meets those requirements.

[@cpear760]

I'm wondering if these are grounded properly as we've seen an increase of hardly any shocks from our old non-powered furniture to multiple shocks once receiving our new powered units.

[@the323vlog4]

That’s a good question

[@TheUnclered2]

Hi, I have a Best electric recliner with foot rest and head rest controls. The foot rest has stopped working but the head rest still works. Any ideas? I've checked the connections and all seem to be fine. Does it sound like the switch on the chair might be bad?

[@the323vlog4]

If the connections are good as you say, I would definitely start with the switch .

[@daveginter9030]

I got a Lazy Boy Loveseat where the leg lift dont always go down. I thought it was the switch so I got one on amazon $15 which looks exactly like the one they tried to sell me for $100 but it still acts the same way. Is it the motor? The box is on. The left side works perfect. Looks very similar to the one in this video.

[@the323vlog4]

I have seen where the control on the good side is actually the issue. I would possibly try that. Plug the new one you received into the side that is working and see if it yields any results. Otherwise, I’d say it’s more than likely a motor issue or a wiring issue between the two sides

[@johnbusuttil875]

Hi I have a manual recliner single sofa and would like to know it I could convert it to a motorized recliner. If yes do you know how, and were I could get the kit.

[@the323vlog4]

Theoretically it’s possible but it’s a lot of work and requires some professional tools. It would require drilling out the drive tube to accept motor brackets. An angle iron usually goes around the drive tube for stability. The motor brackets and motor. One of these days I’ll do a video on one to show how extensive the process is.

[@scottjarvis941]

when i plug the box in the wall i have a bright green light. as soon as i plug the couch into the other end of the box the light goes out and no power to switch. do i need a new transformer box?

[@the323vlog4]

Do you have an additional box from Another unit that you could plug into the one that is gong out to see if it still happens ? It could mean there’s a short in the airing somewhere else. I would check all wiring to make sure it’s not damaged and if you have a spare box, try swapping it to see if it still goes out.

[@grammarichardson5469]

Great information but so far I can’t find anything that saves my problem. Hopefully you have a suggestion. When the recliner is reclined, the c Back creeps back up to the straight up position . The footrest stays up. It’s just the back that won’t stay reclined. Any suggestions for repair would be great. Thank you

[@the323vlog4]

In would check the mechanism and see if there are springs that control that function. If you could replace those springs with ones with less tension that could potentially help. Just a thought

[@kathydwan5356]

My recliner has a broken piece on the side that actually does the raising and lowering it is a long track like piece that has an almost white corkscrew-like piece that was grinding and clicking then broke. Can you identify the part and tell me if it is replaceable? Thanks.

[@the323vlog4]

Sure, please send a picture of it to our email. [e-mail]

[@NedStone102]

My moms LifeSmart recliner has a faulty remote. It’s the Emomo nhx03 which has complaints on durability. I’m trying to get replacement from the factory but have not heard from them yet. I’ve tried searching for it online with no luck. Any ideas where I can find it? Great video by the way.

[@the323vlog4]

Thank you! Are you able to send me a picture of what it looks like and the pin connector on the wire side?

[@the323vlog4]

Our email is [e-mail]

[@osagemission]

I have a ManWah power recliner that was purchased from Furniture Row about ten years ago. The chair is still in excellent condition, but the recliner quit working about a week ago. I contacted the store, and they recommended ordering a switch via Amazon and I did that. With the new switch, the chair still doesn't work. I have a green light on the power supply, so I am assuming the next step is motor assembly. I called Furniture Row again and they said they can get a motor assembly from the factory, but again, Amazon or Ebay will be much quicker. I have found the OKIN Refined part number JLDQ-11 on the motor assembly and its about $100. Should ordering to that part number get me a motor, with drive assembly, that fits? Still nervous.

[@the323vlog4]

Yeah, if it’s the same model numbers it SHOULD fit and work. Great thing about Amazon is being able to return it if it doesn’t work . Did you make sure all connections were secure?

[@chuckpickering6040]

I have an Ashley power recliner that functions, but the foot rest does not extend fully. Do you have a video for that?

[@the323vlog4]

I don’t have one yet. Does it make any weird sounds like something might be catching or binding ?

[@veraoverby3500]

I have a Catnipper power recliner, when reclining in it makes a pop sounds. Like maybe one side gose down faster or something. Can you help?

[@the323vlog4]

Have you flipped it over and inspected it yet? Sounds like the mech is bent and catching on itself

[@rhondabarajas6217]

One of the recliners on my love seat stopped working. Where can I order a switch to see if that's the problem? Mine looks like the one you were showing.

[@the323vlog4]

It’s listed in my video description I believe

[@waynelewis582]

Either the limit switch closest to the motor or the diode is bad on my chair. Do you have a source for replacement parts?

[@the323vlog4]

I’ve only seen full motor replacements offered, not individual parts of the motor

[@briancheshire8958]

From your experience, what's the average lifespan of a motor? My 2015 Okin Refined-R stopped working. Transformer is good and new switch didn't work.

[@the323vlog4]

I’ve seen them go out within a year or even a few months. It’s not the norm but it does happen. I’ve also seen some last years and years

[@briancheshire8958]

@@the323vlog4 Just bought the couch second hand (~4 years old). It worked fine for 5 days. Oh well, looks like I'm buying a motor. Thanks for the input.

[@bullfrogharmonicat]

Mine is an Abbyson power recliner from Costco. Before I order a power switch to test it, my buttons for the headrest headrest functions fine. The one to raise the chair or lower the chair do not function. The fact that one of the switches works and one doesn't, possibly is the motor? Will I be wasting my time getting a power switch to test it?

[@the323vlog4]

I have seen it go both ways before. due to the drastic price difference, I always advise starting off with the switch. If you use a source like Amazon, returns are always an option if it doesn’t resolve the issue

[@Wayz5145]

Thanks for the video. I have a power recliner that also has a button to adjust the position of your head. When I am putting the chair in the down position, 90% of the time it stops going down in the same spot. At that time neither button works. If I wait 15 seconds then they work again. When this happens the power transformer light is still green. Any ideas?

[@the323vlog4]

Sounds like a switch issue

[@michaelasmaturemakeupbeaut816]

Not sure if my power recliner can be repaired. Can you tell me ... I heard a loud pop in the seat of my recliner, tiled chair up to look underneath after it would not go back down and the support bar in the middle is broken in half. it is the part that is between the two arm looking pieces that are attached to the middle long piece that is aligned w the motor. Hope that makes sence. I can email you a pic of it if needed. thanks so much, Ihave watched a nuber of your videos but have not seen this problem mentioned.

[@the323vlog4]

I’d check reclinerhandles.com they have a good selection of drive tubes

[@llorax5459]

I have another question. What tells the actuator to stop at either end of travel (up and/or down). What prevents the actuator from traveling too far forward or back and breaking the mechanism?

[@the323vlog4]

If you look at the actuator the moving part is a white plastic piece. It can I’m go so far on the actuator track.

[@user-mm3fj4ou8y]

Much better than expected.

[@the323vlog4]

Thanks for watching!

[@denisedavis7946]

I have a power reclining sectional with auto headrests. Two end recliners and a center recliner too. The center recliner has different buttons because it has no arm rest. The problem is that the headrest on the center recliner adjusts, going through a whole cycle, every time the legs are put up or down- even though the headrest touch sensitive buttons haven’t been touched. Any thoughts? Thanks!

[@the323vlog4]

Is it brand new or has it been doing that since you received it? I’ve seen wires get crossed before causing that situation. I would flip it over and check to see if the wires are going to the right locations. Usually the mfr is helpful and labels them.

[@denisedavis7946]

It is about two years old and just started doing this in the last month.

[@the323vlog4]

Denise Davis possibly a short in the switch. What I’d try is switching the switches from one of the units that is working and see if it still has the same issue. If not, then you know it’s the switch.

[@denisedavis7946]

the323vlog This sounds ridiculous, but I created a bit more space between the reclining unit with the touch sensitive buttons and the seat next to it. And the problem stopped. I think the friction on those buttons when the recliner was in motion triggered the headrest. Lol!

[@the323vlog4]

Denise Davis that makes sense! Some of those buttons are ultra sensitive! Glad you figured it out and thanks for sharing

[@UATERJOLLY]

Thank you for this video, very detailed 👌 was searching on this topic and you came up first. Not sure where you're located but are you in NC/SC by chance?

[@the323vlog4]

Glad it helped!

[@the323vlog4]

I’m in central Texas. Sorry

[@ctapia0922]

Mine got water flooded, watching your video makes me want to try to fix it but I kind of guess it will be the motor because both sofas stopped working

[@the323vlog4]

Valentina tapia I would check the black power transformer box 1st. See if it has a green light on it.

[@rdoehrman]

Hello, I have a chaise lounge electric recline, all the functions working good but when im sitting in the chair it slowly reclines by itself. the company isnt willing to offer any help because it is out of the warranty. would you know what i can do to fix this?

[@the323vlog4]

Sounds to me like there may be a short or something in the power switch since that’s the only way it could raise up or down . That’s where I would start

[@josequiroz8009]

Does the USB button switch fit the Standard button on all recliners?

[@the323vlog4]

There are a lot of different options that have the USB switch in them. The round switches with a USB port and then are usually universal. I’ve also seen long rectangular switches with USB ports and then. But if you’re referring to the Round switch with a USB port that looks like a two button Round switch, then in my experience, yes they are the same

[@depawl]

Hello. My power recliner makes a loud "clunking" noise halfway up, when the back starts to recline. If I lean forward, or recline it without sitting in it, no noise occurs. I've looked at the mechanism underneath and removed the back, but can't seem to find anything obvious. This recliner is probably 10 years old or more, so I presume something is worn out, but I can't find it. Any ideas? Thanks so much for your great videos.

[@the323vlog4]

Yeah, it sounds like with the added pressure the mechanism may be hitting itself somewhere in the motion. I’d try to have someone sit in it while another person inspects with a flashlight underneath.

[@delta60512]

Thank you for the video.

[@the323vlog4]

You’re very welcome. Thanks for watching!

[@kay123ification]

hi from the uk my chair wont go up any more but i have a green light on my power box iv checked the wires but unsure what i can do to fix this

[@the323vlog4]

I would start with a new power switch and see if that resolves the issue

[@armandovillarreal6182]

We had a babysitter who didn’t realize it was electric & accidentally try to force the recliner to close. The kids eventually showed her the buttons in between. We think that may have done something to stop working? The head rest still functions normally. Any clue? Thanks in advance!

[@the323vlog4]

It sounds like a motor issue. I usually start with the store it was purchased at to see if they have parts available. If you have another motor In a recliner in The home, I’d start with swapping then to see if that resolves the issue

[@hartlandguitars4204]

Hey man :) I just moved my two-seater recliner and now the mechanism is jerky... the power seems too be constant, and the main 'drive-shaft' seems to be smoothly operating... I can't really see anything that may be causing this, so if you have any ideas that'd be much appreciated? It's jerky on both sides too... Cheers!

[@the323vlog4]

When the operation isn’t smooth, my evaluation usually results in determining the mechanism is bent and leaning. I usually like to flip the piece forward to balance on its front edge to get a better view. It’s unfortunately an expensive fix if it’s the mechanisms. How old are the pieces and where were they purchased from?

[@hartlandguitars4204]

@@the323vlog4 oh no :( it was fine until we moved it, so guessing it's been bent somehow. thats mate

[@the323vlog4]

No problem! Glad we could be of assistance

[@nickeywilliams8331]

Hello, I have an electric recliner & I was laying back & the power buttons stopped working. The green light is still on, but my cable is stripped from being caught. So now my chair is sitting in a back position. To at least get it to manaually go back down, which bolts do I have to remove? Are they the two black pieces connect to the modem?

[@the323vlog4]

Yup, that’s them. Should be four bolts

[@the323vlog4]

I explain that portion of it at around six minutes of the video

[@Susan_1]

my chair is a power chair but its not the power thats not working. some thing broke that looks like a bolts that uses a retaining clip to hold it in place. It must be mechanical because it has power. Can you give me any ideas on what this is. Thank you.

[@the323vlog4]

Feel free to send us images of the broken piece so we can try to identify it for you. You can email us at [e-mail]

[@violete4797]

I have a discontinued Ashley recliner that the parts are no longer available. Model 5650413 A six button panel. The buttons that control the back and foot are not working. Can you help

[@the323vlog4]

Possibly. Feel free to send a picture of it to our email at [e-mail]

[@RondaHale-xs1rd]

You said I need to buy a surge bar for my electric recliner. How strong or what size of a Surge Bar do I need to get?

[@the323vlog4]

Not sure. I would check the transformer that powers your recliner and make sure the surge covers that amount.

[@1976z1000]

Thank you 👍

[@the323vlog4]

You are welcome

[@dandubois770]

Great Video! It really helped me understand how all the parts work. I have a quick question I'm hoping you will be able to answer. I have an electric powered love seat and one side stopped working. I was able to identify that the connection between the motor and the transformer is where I'm having an issue. The transformer green light is on but when connect the motor to the transformer there is a smal spark and the transformer goes out immediately. I switched the other transformer from the other side that I know is working and the same thing happpens a small spark and it goes out. I checked the wiring from the from the motor to the connector and it all looks good. I'm thinking I need to replace the motor but was hoping you may have some feed back as to what the problem may be if it's not the motor. Your expertise is greatly appreciated.

[@the323vlog4]

I think you’re on the right track. My assumption would be the motor as well as long as all the wiring is in good shape. There is a short somewhere. Could be the motor itself . I would connect the motor from the working side to the side that’s not working and see if it works and that would narrow down to a motor issue

[@dandubois770]

@@the323vlog4 Thanks for the input, it really helped. I did go back and was able to swith the controllers and realized that was the issue. So I have placed an order for a new one $39. Thanks again and take care

[@calvinw6095]

I’m having same issue. Get power to the adaptor/transformer but get spark when I connect motor to transformer.

[@calvinw6095]

Did that fix your issue?

[@the323vlog4]

Sounds like a short between the transformer and motor. Did you inspect the wiring and see if there was any damage?

[@jesusjuache8974]

Very helpful fixed my own chair 🙏🏽

[@the323vlog4]

Glad to hear it! Thanks for watching

[@kevinfarwell8430]

I have a sectional couch with power recliner. One of the sections will not close. It will move out but will not close. Does that mean it's the switch?

[@the323vlog4]

It is more than likely the switch. If it’s a sectional, I would diagnose it by taking a power switch from another section of the sectional and testing it on the one that is not working and see if that resolves the issue. If it works, then you have narrowed it down to a switch issue

[@frankneugebauer6159]

Yes , I took it apart and not sure about how to connect them. The actuator itself is not cheap so I am looking to repair it myself.

[@the323vlog4]

Are you able to send me some photos of it? Also, what model actuator do you have?

[@the323vlog4]

Our email is [e-mail]

[@livmia051554]

question- my sectional goes up but it does come down... what could be the problem? I bought the sectional from Ashley but they are close for the night. i have checked all connections and seems like everything is plugged in correctly

[@the323vlog4]

It sounds like it could be your power switch. Since it is a sectional, I would try one of the other power switches that is working and see if that solves the issue

[@livmia051554]

@@the323vlog4 thank u

[@the323vlog4]

@@livmia051554 You’re very welcome! Thanks for watching our video

[@deniceduffin2997]

Where can you go to get the parts for your furniture if the manufacturer says that they no longer make them. We have Ashley furniture couch And love Seat that need the undercarriage work done.. We don't know what to do

[@the323vlog4]

Is it a reclining mechanism or springs that you’re looking for?

[@morghulkale4112]

What about the type of switch that looks more like a lever (going up or down to power the recliner) that would likely be located as one of the inner pieces of a sectional

[@the323vlog4]

Do you mind sending a picture of it? [e-mail]

[@mrajewski1]

Do you know if there is a way to shut off just the "lift" part of a lift chair operation so that it just power recliner. The lift chair is not safe for the confused adult to lift all the way up and may get dumped out on the floor.

[@the323vlog4]

Not that I’m aware of. I would look underneath and see if there’s a separate motor or wire, but if I remember correctly it’s all one.

[@GAELADRIAN]

Hi, i bought the power adapter but the recliner doesnt work, Do you think it could be the engine or the controller recliner (two buttons) i need replace the engine , on ebay sell the full kit

[@the323vlog4]

ZENIFF DIAZ Not sure I completely understand your question, but I always start with replacing the cheapest item 1st, which would be your two button switch. Always check to make sure there are no loose wires first as this is very common on new items. I would specifically check the wire going into the power box

[@thomasmartin4831]

My sofa goes up but won't come back down. How do I check and what should I look for. Thank you in advance for your help.

[@lorrainedenigris8078]

Our extended 5 year 😂warranty expired 6 months ago. the Cord that leads to the battery power box was swished in spring coil. By loosening the screws to lessen the tension in the coil, We removed it from the coil. Still wouldn’t work. Then we replaced that battery box with the other power box (non-battery) that came with the chair. That only made a quick connection then stopped working. We will try the up/down button next. Will try getting customer service in the morning. Any other suggestions?

[@the323vlog4]

That’s exactly where I would start.

[@ejapac1]

excellent information thank you so much

[@the323vlog4]

thank you so much for watching! We appreciate the support

[@bradparent2077]

Video was super helpful..thank you!!...problem is I have a West Elm reclining sofa and the manufacturer info is not known...How would I get replacement parts for the unit?

[@the323vlog4]

What kind of part were you needing? Do you know yet? I use recliner-handles.com for a lot of parts. If it’s something as generic as the power transformer boxes or power switches, the generic ones on Amazon should work fine

[@bradparent2077]

@@the323vlog4 Not sure yet, but curious how I determine what motor and transformer I would need for West Elm stuff ...I think its made in China but I can't find out and West Elm customer service won't tell me who manufactured it...its less than 14 months old...ugh

[@the323vlog4]

@@bradparent2077 the electrical parts usually have model numbers printed on them. I would start there

[@bradparent2077]

@@the323vlog4 I was able to remove the motor and transformer relatively easily...its a MotionItalia ...do I have to buy the same brand again? Also, can I sned you a photo or two so you can see what I am talking about? not sure how to attach photo to this thread

[@the323vlog4]

@@bradparent2077 yeah, send some to [e-mail]

[@MirandaDetailing]

. I just bought a new power supply and it’s blinking green. Not sure why. Any help would be appreciated

[@the323vlog4]

Sounds like there is a short somewhere. I’d recommend unplugging the switch from the motor and see if that resolves the blinking

[@MirandaDetailing]

@@the323vlog4 thanks! I’m going to trace the wiring and see what’s going on. I have a feeling it’s the control switch. The usb light has not on.

[@the323vlog4]

@@MirandaDetailing it usually plugs directly into the motor or there may be a small extension wire coming out of the motor. Usually a 5 pin wire

[@MirandaDetailing]

@@the323vlog4 yes! I saw that. Looks like I can just swap it out easily. I have the part ordered. Thanks for your excellent customer service!! This is how a KZbin channel is supposed to work!

[@the323vlog4]

@@MirandaDetailing thanks! That means a lot

[@musical1810]

Hello man, nice tips and walkthrough, I need your help. The frame and everything looks good but my recliner wont work. Whenever I press the switch buttons (either of them) the green light on the adapter stops and starts to light again if I release the button. Hope you understand what I'm trying to tell. Please help me out!!!!!!

[@the323vlog4]

It sounds like you have a short in the switch. I would recommend getting a new switch, plug it in before installing it all through the arm and test it out. That is the cheapest and simplest solution. I recommend checking on Amazon just in case you need to return it

[@musical1810]

@@the323vlog4 thanks for the reply, i will surely try out your suggestion!

[@the323vlog4]

@@musical1810 let us know! Thanks

[@michigandon]

I have a power sofa in which one of the brackets broke on one side, causing it to go all lopsided when I try to recline it. Is there any way that I can remove this piece and have somebody weld it?

[@the323vlog4]

Sounds very possible. Are you able to send me some pictures of the broken piece so I can take a look at it for you? You can send it to my email at [e-mail]

[@simonjones3467]

Great video thanks!

[@the323vlog4]

Thanks for watching !

[@normanrowe2831]

Thanks. I know it’s the button switch which failed. Thanks for the info about disconnecting the motor from the frame.. I have a recliner stuck in the upright position. This will help.

[@the323vlog4]

Norman Rowe glad we could help! Good luck

[@robertbrumm7680]

Recliner quit working out of the blue. I have a green light on my power source after I unplug the motor from it. As soon as it is plugged back in the green light goes out. What is that all about? It's an emomo motor. Any Ideas? Thanks

[@the323vlog4]

I was actually working on a power recliner today that had the same issue. In my case, the switch was the issue. In my scenario, there were three wires coming out of the motor that split to the headrest, the switch and power. I knew it was the switch, because when I unplugged the switch from the motor, the greenlight stayed illuminated. You might try that and see if you have any luck.