How to pre-wire and prep a Fortin Ford plug and play remote start

[@fieldauditservices6870]

The 5 P's. You had a wise father. Thanks so much for sharing. Stay safe.

[@FlyEaglesFly19111]

2 things I do differently. I would not twist wires with a drill. That could cause a break in the wire somewhere possibly. Secondly pulling the wire so tight and in time will put pressure on those plugs. Being an HVAC tech/installer ive seen many wiring plugs fail due to tension. I will say GREAT GREAT GREAT video on pre installing though. Thanks a ton for sharing with people. Stay safe and be well.

[@darrensoames]

No mess straight to the point guy... many thanks for the video

[@FirstTwan]

Amazing video. Do you offer a kit for 2023 gmc savanna 2500?

[@rsucre]

Great video! I plan to install this on my new Subaru Forester 2018. I would appreciate any help regarding which cables to cut and use for that specific car. Thanks.

[@thomastorre8352]

Confused, is that what I have to do or you prepare for me.

[@nicmo6913]

@Lesscoelectronics you ever modify a fortin to remote start a honda pilot 08 with OEM remote? I called Fortin they told they have no info for 08 but for 09 up.

[@mrmuscle4354]

I have a 2014 Ford Edge and I follow your wiring of your video and I program my 2 fob keys I have no idea what's going on but the only way my remote keys start my vehicle I have to leave one of the key in the ignition to start the engine what went wrong?

[@jachipz1964]

What brand remote start? And can I get one for a 2005 Explorer?

[@jamesbryant9059]

The orange wires that got the connectors at the end where those go?( small white plug) the end of the wires , where do you connect it?

[@michaellangerman4615]

Will this kit work for a 2012 ford f150 if so do you have a link for it thank you.

[@Chris-Fennimore]

I have installed the EVO-ONe on other vehicles, but I cannot figure out how to install it on my 2008 Ford F250 SuperDuty. This truck does not have an encrypted key, and does not have a factory remote FOB. Its a dumb key that can be copied at any hardware store. I would like Remote-Unlock and Remote Start features added. Can you put together a harness with the Required components to accomplish this? Thanks

[@buildstoys]

Just get an EVO-ALL with the appropriate T-Harness and then add an external RF kit, along with the door lock actuators.

[@Lesscoelectronics]

Easily, call us at 904 342 5491

[@samarals-b9s]

My car, Toyota Prado 2022, I did not find it among the cars compatible with the remote start device

[@RexMeyer-vy1ip]

where does the plugs plug into? Do they plug into the regular wiring harness

[@MsHOLGAR]

Hey í have seen this video tnx, i have a ford escape 2008 where schall í connect the to gray leads in diagnostisk "which color" and the power leads Best regards fom Faroe Island holgar

[@obediahanderson788]

How do you add the RF long range antenna? What plugs or wires do I use to make the connection to the canbus? Thanks.

[@triconner]

I would like to know this as well. After pausing a lot I got all the rest down. Looks like he's using the grey/ black and grey. Not sure where either goes on the obd 2

[@larrybray36]

Hello, I have a 2014 Ford Escape. I hooked all the wires up as shown in your video and have followed the directions to program my keys. But, for some reason the blue and red lights aren’t flashing after I take the second key out and hold down the button on the unit. I can’t seem to figure out what I’m doing wrong. I’ve triple check upon triple check my wiring. Please help if you can!!!

[@joemikes325]

I bought an fortin evo fort4. I am installing in 2011 ford taurus sel with standard key. Do I also need to buy/use a flash link updater? Site said pre programmed for ford Lincoln. But do I still need flash link? Thanks a bunch

[@DanielLopez1994]

Lessco Electronics I haven’t checked myself, but is there a remote start kit and install guide for a 1998 Infiniti Qx4/Nissan Pathfinder?

[@curt2207]

Any tips on installing the Fort4 into a 2011 Focus with 1 key? Looks like I'll need the Flash tool in order to use Dcryptor to copy the 1 key but it should work.

[@coolantsplus4546]

Hey is this the same prep if I was putting into a 2014 Ford Edge?

[@susanjohnson7716]

I bought one but I don’t know how to do all the electrical. Can I send it back and pay you to do it and send it back ready for hookup?

[@Lesscoelectronics]

sure, call us 904 342 5491

[@rickeyearnest]

Where can I find instructions for a 2019 Ford edge.

[@therookie5263]

Hi, I have an 18 F150...I got this remote starter for Christmas but it’s not prepped like yours...think you could help me out? I’ll send it to ya, and whatever monitory costs as well...thx a lot, great video

[@Lesscoelectronics]

I'll give you late Christmas gift, I'll do it no charge! Send it to me with a note to: Lessco Electronics attn: Martin 150 Hilden Rd Suite 314 Ponte Vedra FL 32081

[@mikerenza2253]

What would cause a remote start to start while its already remote started.sp502 and mycar teleconnect module.second burned sp502.works for 3 months both of em.

[@triconner]

It would be really awesome of you could send me one of the schematics your using. I didn't get one with my kit. 2012 f150

[@johnpignataro2422]

for a 2011 ford expedition do i need eco all or eco one and is there a harness for this car

[@monkeyball1717]

I have this same kit installed in my 2014 Ford focus SE HB. I know Fortin sells range extender FOBs, how can you add those to a pre-existing system and does the unit need to be reflashed?

[@Lesscoelectronics]

Yes you can add an rf kit, However it will need to be turned specifically for the brand rf kit you want to use with it.

[@Sanjeevrao1234]

I got pre-wired Evo-all with Linkr LT2. Everything works except aux options on the app. I don’t know how to make windows and trunk to work on the phone app. Any suggestions???

[@Lesscoelectronics]

you have to turn the settings on using a flashlink

[@DanielLopez1994]

Great video!

[@Lesscoelectronics]

thanks

[@MegaEfu]

I purchased a evo all didn't realize it was without a T harness how do I go about wiring it or can I buy a wire harness separately?

[@Lesscoelectronics]

what car is this for?

[@MegaEfu]

@@Lesscoelectronics 2015 Ford F150

[@nayefalfaify1075]

Please I need instructions for grand marquis 2002

[@jameshorrocks2939]

My car requires a 1k ohm resistor on the parking light wire. Can you link me one i should use. Its a 2014 dodge grand caravan.

[@Lesscoelectronics]

Email me your address, I'll send you one as a Christmas gift. [e-mail]

[@newmoney22311]

Got a evo fort1 for my 2011 ford fusion se its preloaded can someone help me with install guide and if its preloaded do i have to flash it

[@luismeza5135]

Need one for 2007 F-150

[@danmartinez3390]

Do you have a kit for a 2014 f150 lx?

[@Lesscoelectronics]

I have several to choose from: www.ebaystores.com/Lessco-Electronics/_i.html?_nkw=2014+f150&submit=Search&_sid=77826561

[@BigBlockOverland]

Will these kits work on a ford focus 5speed standard?

[@BigBlockOverland]

2013

[@Lesscoelectronics]

maybe, what year is it?

[@brianchiarizia7247]

@@Lesscoelectronics can you help me out. I bought this remote start for my wife's 2012 explorer 3 years ago. YES 3 years ago. The online instructions were kinda confusing so I never bothered to install it. Your video made it look much easier. What wires do I need in order to hook it up in a 2012 explorer? Thanks for any info.

[@carlubambi5541]

Worst thing you can do is cut the factor harness .Leave all wires factory length heat shrink and wrap and use loom or spiral band .You assume it's a one shot deal and you can't transfer it to another vehicle or replace a module when one is defective .And these remote starters do fail on a regular basis .

[@jeremyboven]

Wondering what you charge me to make me a harness up for my 08 lincoln mkz std key. Please email me.

[@ilovetoyotatrucks]

I need a new remote start with a LCD screen like my Excalibur but I never did anything alarm- I think I can handle it now after 15years of doing my own car audio hundreds of AMPS & SUBS & box's and 10's of vehicles ... I have no antenna in mine & it's 10years old now I wanna be alerted when some1 or something chirps the warning like it does now But some features that were never hooked up I want are Windows go up & down by remote Remote start was never hooked up & iv e had a breathalyzer installed 10years ago on it It being a 2002 toyota tundra sr5 4x4 4.7L 2UZFE V8 access cab only 2 front windows are motorizes the door locks & lights all work & turn off when I open the door -but it's just old & I didn't do it a shop did

[@ilovetoyotatrucks]

The breathalyzer is gone but I dunno if I can check the CONECTORS & mabey take them out of not in use & either use those for the new alarm or new stuff or ... I got tessa tape I can wrap the spots in not in use!

[@tobiasvoid9789]

How do we get in contact with you

[@Lesscoelectronics]

Call 904-342-5491

[@joshto2456]

Hey how you doing? I have a question about this car alarm that I wanna install I was hoping you could help me, so I wanna install an aftermarket alarm , it’s a basic avital on my Acura rsx 2002 but it has a factory alarm , I’m checking the wiring diagram of it and it says that it has a FACTORY ALARM DISARM wire and it’s -negative, but the aftermarket alarm doesn’t have a FACTORY ALARM DISARM wire , so I wanna know How could I disarm the factory one even if the aftermarket doesn’t have a wire for it , thanks in advance!

[@DetrellOfATL]

Josh To Avital remote start is sure to have a disarm wire, it's usually light green with a black stripe, if you don't see that wire you could use any negative (-) output. Also should have a dark blue (ground when running output).

[@joshto2456]

DetrellOfATL the Avital that I’m installing is a basic alarm probably that’s why i can’t find the disarm wire, someone told me that I could just ground to the chasis the FACTORY ALARM DISARM wire from the car to permanently disable it but I don’t know if it’s true

[@Lesscoelectronics]

Depending on the alarms features, You can use tit's disarm output, or in the worse case, You can tie the unlock output in with a double diode to control both at once.

[@joshto2456]

Lessco Electronics ok and how would you connect the double diode ?

[@Lesscoelectronics]

I have a video on that topic on my channel, take a look

[@brianjlevine]

I guess I'm a bit slow. You go too fast for me to follow and don't explain well enough for me.

[@michealjones3665]

Moves too fast, doesn't give a clear view of what to do!

[@jaswinderdhillon7772]

Hello What’s your email.. I have that Fortin evo but not working

[@Lesscoelectronics]

[e-mail]