Did all this on my new BMW except for the polishing part since the car was pretty new (fresh from Munich, I drove it only for about 6 weeks). Would really recommend it to every buyer of a new car, to do that as soon as possible, since you don't need the polishing steps (at least for me because the paint was in pristine condition). Oh and I used the lite version of CQUARTZ which is incredible easy to put on and almost held for 2 years (wash my car very regularly and use ceramic detailer like the one from Sonax) which completely blew me away.
@andrewvickers4487 Жыл бұрын
Corey, your experience and professionalism comes across in the advice you give so thanks for taking the time to go over all the 101's for us DIYers. I also watched your polishing video afterwards and I appreciate all the details, really good stuff thank you.
@SkyCarCare Жыл бұрын
I appreciate that! Thank you so much Andrew ❤
@adin7827 Жыл бұрын
Hi Corey, when will be available DQUARTZ presentation on your channel?
@SkyCarCare Жыл бұрын
Hi Adin! So we are in the works on getting a video shot by one of our CQUARTZ Finest installers. It might be a little while before it is released. If you have any questions however on where to get DQUARTZ installed or more about the product itself, you can always reach out to our service team.
@Slowcarfastbeans Жыл бұрын
Can’t forget about the rubber removal step after wash if you have those. Ive used the Mother’s R3 and it’s extremely basic; it will strip off the cured silicone that is the ceramic coating.
@reefhog Жыл бұрын
Rubber and silicone are not the same thing and ceramic coatings are not silicone either. Silicon dioxide is what is the ceramic material in ceramic coatings, it’s not silicone.
@Slowcarfastbeans Жыл бұрын
@@reefhog uh huh
@hyejack107 ай бұрын
After applying cquart uk two coats and top off with reload how long before you can pull it out of garage and drive? How long before first wash? Thanks in advance!
@SkyCarCare7 ай бұрын
Great question! It depends on the conditions. If you are in winter and salty roads then the longer the better!!! Even a week would be GREAT in that situation... But if not possible then AT LEAST 24~48 hours. If you are in normal conditions and clean roads and no rain with no cars on the road then you COULD take it out a few hours later but best to wait 12~24.
@Anienee Жыл бұрын
Do you think that CarPro will come out with a consumer friendly/ DIY DQUARTZ version? I would love to install DQUARTZ on my car but don't want to let an installer do it for me. It takes away the from the interaction and enjoyment of taking care of my car.
@SkyCarCare Жыл бұрын
First, LOVE the way you described WHY you want DQUARTZ. Most people just want for the product, not for the experience. So we greatly appreciate your feedback and your perspective. To answer you question. CARPRO is working on a commercially available version of the coating that uses the diamond technology. We don't have a date yet though. It could be a while until we get more testing time with DQUARTZ on the market. - James
@Anienee Жыл бұрын
@@SkyCarCare Thanks James, I have been your customer for quite a while now and love what you guys are doing. You have earned a customer for life and hope to continue supporting you guys :) Side note: I hope CarPro comes out with a Diamond Technology soon as I will be one of the first ones to try it.
@andreaszaxarakis22148 ай бұрын
Hello I have a question what if at the final stage of polishing use carpro essence we need to ipa wipe off or it’s ok after essence go to apply ceramic coating ?
@SkyCarCare8 ай бұрын
Best to use Eraser or a 50/50 spa to be 100% sure of bond
@sirliftsalot1154 Жыл бұрын
1. After polishing with Essence, how soon can I apply SiC? 2. After polishing with Essence, how long can I wait before applying SiC?
@SkyCarCare Жыл бұрын
After you have made it all the way around the car then you can take Eraser and a mf towel and start in the same place you started with Essence and go the same direction around car with your light wipe down. If it is possible then best practice is to wait 4 hours or even 12 hours b ut you can certainly do it within an hour if you do not have the time to wait.
@sirliftsalot1154 Жыл бұрын
@@SkyCarCare What if I polish with Essence and apply SiC a day or 2 later for some reason?
@SkyCarCare Жыл бұрын
@@sirliftsalot1154 Yes, that is great :). As long as the car was still in garage staying clean then its great. In this case then wait until you are about to apply the coating and do the light Eraser wipe down at this time before the coating.
@kevingibson945 Жыл бұрын
I bought some CARPRO bucket stickers from you guys can you do a video on how to install the new bucket stickers on a black bucket please?
@SkyCarCare Жыл бұрын
Hi Kevin, which stickers did you purchase? We sell two versions and will be happy to do a quick video for you.
@kevingibson945 Жыл бұрын
@@SkyCarCare ii have tow sets of the new bucket stickers but I'm having a problem installing the to my black buckets
@SkyCarCare Жыл бұрын
@@kevingibson945 Hi Kevin, which stickers (we sell two versions) and what is the problem? Email us at service@carpro-us.com for fast service
@mikew4088 Жыл бұрын
Great information! I’m about to install CQuartz this weekend on my partially PPF wrapped Tesla. Any recommendations for prepping the PPF (3M) for ceramic? Can essence be used on PPF? If so, pad recommendations?
@SkyCarCare Жыл бұрын
Hmm, thats a tough question since the ppf has already been worn by the car awhile. Generally speaking the answer is yes. Essence on a microfiber finishing pad will do. But be sure to make sure it doesn't void any issue with your PPF to polish it.
@mikew4088 Жыл бұрын
@@SkyCarCare used a Meg’s MF finishing pad and it came out great! Appreciate the suggestion!
@MrJvjava5 ай бұрын
what do you recommend to prep the exterior, plastic trim and moldings, flat & textured? 70% isopropyl alcohol to water mixture?
@SkyCarCare5 ай бұрын
Yes, for exterior plastics wash well with CARPRO Inside and a microfiber - then rinse well water, then dry and wipe down with the IPA ratio you suggested above.
@MrJvjava5 ай бұрын
Do you recommend using Dlux on interior, or something else?
@MrJvjava5 ай бұрын
I currently use 303 interior/ exterior protectorant
@SkyCarCare5 ай бұрын
@@MrJvjava Thanks Jon, I would NOT use Dlux for the interiors. I would choose from one of 2 products for protecting the interior. If you like a little gloss or a very economically priced product that is comparable or superior to 303 then use CARPRO PERL. That is a concentrate you can cut 1:3, 1:5, or 1:8 for interior making it very economical. Just cut to suit the gloss you want. 1:3 is glossy, 1:5 is closer to satin / slight gloss, 1 part PERLA / 8 part water is between satin and matte. www.carpro-us.com/wheels-trim/carpro-perl-500ml-17oz/ If you want something that leaves the finish feeling soft and silky and is a like new matte finish and lasts 3-6 months then use Ultima Interior Guard Plus www.carpro-us.com/interior/ultima-interior-guard-plus-4-oz/ This one costs more but goes a long way. Wipe on thin and spread out. If you want a really long life coating for leather then look at Colourlock Top Life www.carpro-us.com/latest-arrivals/colourlock-top-life-leather-coating-new/ or CQUARTZ Leather www.carpro-us.com/interior/cquartz-leather-2-0-30ml-kit/
@MrJvjava5 ай бұрын
@@SkyCarCare thanks for all the information. I really like the 303. I have used it on my boats for over 20!years. Love it.. 2 more questions. Do. Treat the Toyota/Lexus Nu-Lux fake leather as “leather” or Vinyl? I notice most leather conditioners say leather or Vinyl. What do you use for the soft rubber around the door seals? PERL as well?
@kimnewling5728 Жыл бұрын
Howd you get so banged up?
@SkyCarCare Жыл бұрын
Haha, Chinese medicine :)
@rogerbaron9514 Жыл бұрын
Can you use Car Pro Essence Gloss Enhancer with any coating?
@SkyCarCare Жыл бұрын
Not all, but most.
@christhomas4260 Жыл бұрын
What is the reason people Ceramic coat
@SkyCarCare Жыл бұрын
People choose to ceramic coat their vehicles for its protection of paint/ other surfaces, ease of clean ability, and gloss preservation capabilities. Thats a VERY diluted explanation of what coatings do but you can expect hydrophobic properties, lasting gloss (after polishing) and preservation of paint. If you need more info, reach out to our service team and we can talk more! - James